Open CASCADE Technology
7.0.0
|
A framework to display constraints of perpendicularity between two or more interactive datums. These datums can be edges or faces. More...
#include <AIS_PerpendicularRelation.hxx>
Public Member Functions | |
AIS_PerpendicularRelation (const TopoDS_Shape &aFShape, const TopoDS_Shape &aSShape, const Handle< Geom_Plane > &aPlane) | |
Constructs an object to display constraints of perpendicularity on shapes. This object is defined by a first shape aFShape, a second shape aSShape, and a plane aPlane. aPlane is the plane of reference to show and test the perpendicular relation between two shapes, at least one of which has a revolved surface. More... | |
AIS_PerpendicularRelation (const TopoDS_Shape &aFShape, const TopoDS_Shape &aSShape) | |
Constructs an object to display constraints of perpendicularity on shapes. This object is defined by a first shape aFShape and a second shape aSShape. More... | |
virtual void | Compute (const Handle< Prs3d_Projector > &aProjector, const Handle< Geom_Transformation > &aTrsf, const Handle< Prs3d_Presentation > &aPresentation) override |
computes the presentation according to a point of view given by <aProjector>. To be Used when the associated degenerated Presentations have been transformed by <aTrsf> which is not a Pure Translation. The HLR Prs can't be deducted automatically WARNING :<aTrsf> must be applied to the object to display before computation !!! More... | |
![]() | |
void | SetColor (const Quantity_NameOfColor aColor) override |
Allows you to provide settings for the color aColor of the lines representing the relation between the two shapes. More... | |
void | SetColor (const Quantity_Color &aColor) override |
void | UnsetColor () override |
Allows you to remove settings for the color of the lines representing the relation between the two shapes. More... | |
virtual AIS_KindOfInteractive | Type () const override |
Returns the kind of Interactive Object: More... | |
virtual AIS_KindOfDimension | KindOfDimension () const |
Indicates that the type of dimension is unknown. More... | |
virtual Standard_Boolean | IsMovable () const |
Returns true if the interactive object is movable. More... | |
const TopoDS_Shape & | FirstShape () const |
virtual void | SetFirstShape (const TopoDS_Shape &aFShape) |
const TopoDS_Shape & | SecondShape () const |
Returns the second shape. More... | |
virtual void | SetSecondShape (const TopoDS_Shape &aSShape) |
Allows you to identify the second shape aSShape relative to the first. More... | |
void | SetBndBox (const Standard_Real Xmin, const Standard_Real Ymin, const Standard_Real Zmin, const Standard_Real Xmax, const Standard_Real Ymax, const Standard_Real Zmax) |
void | UnsetBndBox () |
const Handle< Geom_Plane > & | Plane () const |
Returns the plane. More... | |
void | SetPlane (const Handle< Geom_Plane > &aPlane) |
Allows you to set the plane aPlane. This is used to define relations and dimensions in several daughter classes. More... | |
Standard_Real | Value () const |
Returns the value of each object in the relation. More... | |
void | SetValue (const Standard_Real aVal) |
Allows you to provide settings for the value aVal for each object in the relation. More... | |
const gp_Pnt & | Position () const |
Returns the position set using SetPosition. More... | |
void | SetPosition (const gp_Pnt &aPosition) |
Allows you to provide the objects in the relation with settings for a non-default position. More... | |
const TCollection_ExtendedString & | Text () const |
Returns settings for text aspect. More... | |
void | SetText (const TCollection_ExtendedString &aText) |
Allows you to provide the settings aText for text aspect. More... | |
Standard_Real | ArrowSize () const |
Returns the value for the size of the arrow identifying the relation between the two shapes. More... | |
void | SetArrowSize (const Standard_Real anArrowSize) |
Allows you to provide settings for the size of the arrow anArrowsize identifying the relation between the two shapes. More... | |
DsgPrs_ArrowSide | SymbolPrs () const |
Returns the value of the symbol presentation. This will be one of: More... | |
void | SetSymbolPrs (const DsgPrs_ArrowSide aSymbolPrs) |
Allows you to provide settings for the symbol presentation. More... | |
void | SetExtShape (const Standard_Integer aIndex) |
Allows you to set the status of the extension shape by the index aIndex. The status will be one of the following: More... | |
Standard_Integer | ExtShape () const |
Returns the status index of the extension shape. More... | |
virtual Standard_Boolean | AcceptDisplayMode (const Standard_Integer aMode) const override |
Returns true if the display mode aMode is accepted for the Interactive Objects in the relation. ComputeProjPresentation(me; aPres : Presentation from Prs3d; Curve1 : Curve from Geom; Curve2 : Curve from Geom; FirstP1 : Pnt from gp; LastP1 : Pnt from gp; FirstP2 : Pnt from gp; LastP2 : Pnt from gp; aColor : NameOfColor from Quantity = Quantity_NOC_PURPLE; aWidth : Real from Standard = 2; aProjTOL : TypeOfLine from Aspect = Aspect_TOL_DASH; aCallTOL : TypeOfLine from Aspect = Aspect_TOL_DOT) More... | |
void | SetAutomaticPosition (const Standard_Boolean aStatus) |
Standard_Boolean | AutomaticPosition () const |
![]() | |
virtual Standard_Integer | Signature () const |
Specifies additional characteristics of Interactive Objects. A signature is, in fact, an index with integer values assigned different properties. This method is frequently used in conjuction with Type to give a particular type and signature to an Interactive Object. By default, the Interactive Object has a None type and a signature of 0. Among the datums, this signature is attributed to the shape The remaining datums have the following default signatures: More... | |
virtual Standard_Boolean | AcceptShapeDecomposition () const |
Informs the graphic context that the interactive Object may be decomposed into sub-shapes for dynamic selection. The most used Interactive Object is AIS_Shape. Activation methods for standard selection modes are proposed in the Interactive Context. These include selection by vertex or by edges. For datums with the same behavior as AIS_Shape, such as vetices and edges, we must redefine the virtual method so that AcceptShapeDecomposition returns false. Rule for selection : Mode 0 : Selection of the interactive Object itself Mode 1 : Selection of vertices Mode 2 : Selection Of Edges Mode 3 : Selection Of Wires Mode 4 : Selection Of Faces ... More... | |
void | SetCurrentFacingModel (const Aspect_TypeOfFacingModel aModel=Aspect_TOFM_BOTH_SIDE) |
change the current facing model apply on polygons for SetColor(), SetTransparency(), SetMaterial() methods default facing model is Aspect_TOFM_TWO_SIDE. This mean that attributes is applying both on the front and back face. More... | |
Aspect_TypeOfFacingModel | CurrentFacingModel () const |
Returns the current facing model which is in effect. More... | |
virtual void | SetWidth (const Standard_Real aValue) |
Allows you to provide the setting aValue for width. Only the Interactive Object knows which Drawer attribute is affected by the width setting. More... | |
virtual void | UnsetWidth () |
virtual Standard_Integer | DefaultDisplayMode () const |
Returns the default display mode. This method is to be implemented when the main mode is not mode 0. More... | |
void | Redisplay (const Standard_Boolean AllModes=Standard_False) |
Updates the active presentation; if <AllModes> = Standard_True all the presentations inside are recomputed. IMPORTANT: It is preferable to call Redisplay method of corresponding AIS_InteractiveContext instance for cases when it is accessible. This method just redirects call to myCTXPtr, so this class field must be up to date for proper result. More... | |
void | SetInfiniteState (const Standard_Boolean aFlag=Standard_True) |
Sets the infinite state flag aFlage. if <aFlag> = True , the interactiveObject is considered as infinite, i.e. its graphic presentations are not taken in account for View FitAll... More... | |
Standard_Boolean | IsInfinite () const |
Returns true if the interactive object is infinite. In this case, its graphic presentations are not taken into account in the fit-all view. More... | |
Standard_Boolean | HasInteractiveContext () const |
Indicates whether the Interactive Object has a pointer to an interactive context. More... | |
Handle< AIS_InteractiveContext > | GetContext () const |
Returns the context pointer to the interactive context. More... | |
virtual void | SetContext (const Handle< AIS_InteractiveContext > &aCtx) |
Sets the interactive context aCtx and provides a link to the default drawing tool or "Drawer" if there is none. More... | |
Standard_Boolean | HasOwner () const |
Returns true if the object has an owner attributed to it. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. More... | |
const Handle< Standard_Transient > & | GetOwner () const |
Returns the owner of the Interactive Object. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. There are two types of owners: More... | |
void | SetOwner (const Handle< Standard_Transient > &ApplicativeEntity) |
Allows you to attribute the owner ApplicativeEntity to an Interactive Object. This can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of. The owner takes the form of a transient. More... | |
void | ClearOwner () |
Each Interactive Object has methods which allow us to attribute an Owner to it in the form of a Transient. This method removes the owner from the graphic entity. More... | |
Standard_Boolean | HasUsers () const |
const TColStd_ListOfTransient & | Users () const |
void | AddUser (const Handle< Standard_Transient > &aUser) |
void | ClearUsers () |
Standard_Boolean | HasDisplayMode () const |
Returns true if the Interactive Object has a display mode setting. Otherwise, it is displayed in Neutral Point. More... | |
void | SetDisplayMode (const Standard_Integer aMode) |
Sets the display mode aMode for the interactive object. An object can have its own temporary display mode, which is different from that proposed by the interactive context. The range of possibilities currently proposed is the following: More... | |
void | UnsetDisplayMode () |
Removes display mode settings from the interactive object. More... | |
Standard_Integer | DisplayMode () const |
Returns the display mode setting of the Interactive Object. The range of possibilities is the following: More... | |
Standard_Integer | SelectionPriority () const |
Returns the selection priority setting. -1 indicates that there is none. You can modify the selection priority of an owner to make one entity more selectionable than another one. The default selection priority for an owner is 5, for example. To increase selection priority, choose a setting between 5 and 10. An entity with priority 7 will take priority over one with a setting of 6 if both objects are selected at the same time. You could give vertices priority 8, edges priority 7, faces priority 6, and shapes priority 5. If a vertex, an edge and a face are simultaneously detected during selection, only the vertex will then be highlighted. For trihedra, for example, the default priorities are the following four: More... | |
void | SetSelectionPriority (const Standard_Integer aPriority) |
Allows you to provide a setting aPriority for selection priority. You can modify selection priority of an owner to make one entity more selectionable than another one. The default selection priority for an owner is 5, for example. To increase selection priority, choose a setting between 5 and 10. An entity with priority 7 will take priority over one with a setting of 6. More... | |
void | UnsetSelectionPriority () |
Removes the setting for selection priority. SelectionPriority then returns -1. More... | |
Standard_Boolean | HasSelectionPriority () const |
Returns true if there is a setting for selection priority. You can modify selection priority of an owner to make one entity more selectionable than another one. The default selection priority for an owner is 5, for example. To increase selection priority, choose a setting between 5 and 10. An entity with priority 7 will take priority over one with a setting of 6. More... | |
Standard_Boolean | HasHilightMode () const |
Returns true if the Interactive Object is in highlight mode. More... | |
Standard_Integer | HilightMode () const |
Returns the setting for highlight mode. At dynamic detection, the presentation echoed by the Interactive Context, is by default the presentation already on the screen. You can specify a Highlight presentation mode which is valid no matter what the active representation of the object. It makes no difference whether this choice is temporary or definitive. To do this, we use the following functions: More... | |
void | SetHilightMode (const Standard_Integer anIndex) |
Sets the highlight mode anIndex for the interactive object. If, for example, you want to systematically highlight the wireframe presentation of a shape - whether visualized in wireframe presentation or with shading - you set the highlight mode to 0. More... | |
void | UnsetHilightMode () |
Allows the user to take a given Prs for hilight ex : for a shape which would be displayed in shading mode the hilight Prs is the wireframe mode. if No specific hilight mode is defined, the displayed Prs will be the hilighted one. More... | |
Standard_Boolean | HasColor () const |
Returns true if the Interactive Object has color. More... | |
virtual Quantity_NameOfColor | Color () const |
Returns the color setting of the Interactive Object. More... | |
virtual void | Color (Quantity_Color &aColor) const |
Standard_Boolean | HasWidth () const |
Returns true if the Interactive Object has width. More... | |
Standard_Real | Width () const |
Returns the width setting of the Interactive Object. More... | |
Standard_Boolean | HasMaterial () const |
Returns true if the Interactive Object has a setting for material. More... | |
virtual Graphic3d_NameOfMaterial | Material () const |
Returns the current material setting. This will be on of the following materials: More... | |
virtual void | SetMaterial (const Graphic3d_NameOfMaterial aName) |
Sets the name aName for material defining this display attribute for the interactive object. Material aspect determines shading aspect, color and transparency of visible entities. More... | |
virtual void | SetMaterial (const Graphic3d_MaterialAspect &aName) |
Sets the material aMat defining this display attribute for the interactive object. Material aspect determines shading aspect, color and transparency of visible entities. More... | |
virtual void | UnsetMaterial () |
Removes the setting for material. More... | |
virtual void | SetTransparency (const Standard_Real aValue=0.6) |
Attributes a setting aValue for transparency. The transparency value should be between 0.0 and 1.0. At 0.0 an object will be totally opaque, and at 1.0, fully transparent. Warning At a value of 1.0, there may be nothing visible. More... | |
Standard_Boolean | IsTransparent () const |
Returns true if there is a transparency setting. More... | |
virtual Standard_Real | Transparency () const |
Returns the transparency setting. This will be between 0.0 and 1.0. At 0.0 an object will be totally opaque, and at 1.0, fully transparent. More... | |
virtual void | UnsetTransparency () |
Removes the transparency setting. The object is opaque by default. More... | |
virtual void | UnsetAttributes () override |
Clears settings provided by the drawing tool aDrawer. More... | |
void | State (const Standard_Integer theState) |
Standard_Integer | State () const |
Standard_Boolean | HasPresentation () const |
Returns TRUE when this object has a presentation in the current DisplayMode() More... | |
Handle< Prs3d_Presentation > | Presentation () const |
Returns the current presentation of this object according to the current DisplayMode() More... | |
void | SetAspect (const Handle< Prs3d_BasicAspect > &anAspect, const Standard_Boolean globalChange=Standard_True) |
Sets the graphic basic aspect to the current presentation. When <globalChange> is TRUE , the full object presentation is changed. When <globalChange> is FALSE , only the current group of the object presentation is changed. More... | |
virtual void | SetPolygonOffsets (const Standard_Integer aMode, const Standard_ShortReal aFactor=1.0, const Standard_ShortReal aUnits=0.0) |
Sets up polygon offsets for this object. It modifies all existing presentations of <anObj> (if any), so it is reasonable to call this method after <anObj> has been displayed. Otherwise, Compute() method should pass Graphic3d_AspectFillArea3d aspect from <myDrawer> to Graphic3d_Group to make polygon offsets work. More... | |
virtual Standard_Boolean | HasPolygonOffsets () const |
Returns Standard_True if <myDrawer> has non-null shading aspect. More... | |
virtual void | PolygonOffsets (Standard_Integer &aMode, Standard_ShortReal &aFactor, Standard_ShortReal &aUnits) const |
Retrieves current polygon offsets settings from <myDrawer>. More... | |
virtual void | BoundingBox (Bnd_Box &theBndBox) override |
Returns bounding box of object correspondingly to its current display mode. More... | |
void | SetIsoOnTriangulation (const Standard_Boolean theIsEnabled) |
Enables or disables on-triangulation build of isolines according to the flag given. More... | |
![]() | |
virtual | ~SelectMgr_SelectableObject () |
Clears all selections of the object. More... | |
void | RecomputePrimitives () |
Re-computes the sensitive primitives for all modes. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection. More... | |
void | RecomputePrimitives (const Standard_Integer theMode) |
Re-computes the sensitive primitives which correspond to the <theMode>th selection mode. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection. More... | |
void | AddSelection (const Handle< SelectMgr_Selection > &aSelection, const Standard_Integer aMode) |
Adds the selection aSelection with the selection mode index aMode to this framework. More... | |
void | ClearSelections (const Standard_Boolean update=Standard_False) |
Empties all the selections in the SelectableObject <update> parameter defines whether all object's selections should be flagged for further update or not. This improved method can be used to recompute an object's selection (without redisplaying the object completely) when some selection mode is activated not for the first time. More... | |
const Handle< SelectMgr_Selection > & | Selection (const Standard_Integer aMode) const |
Returns the selection Selection having the selection mode aMode. More... | |
virtual Standard_Boolean | HasSelection (const Standard_Integer theMode) const |
Returns true if a selection corresponding to the selection mode theMode was computed for this object. More... | |
void | Init () |
Begins the iteration scanning for sensitive primitives. More... | |
Standard_Boolean | More () const |
Continues the iteration scanning for sensitive primitives. More... | |
void | Next () |
Continues the iteration scanning for sensitive primitives. More... | |
const Handle< SelectMgr_Selection > & | CurrentSelection () const |
Returns the current selection in this framework. More... | |
void | ResetTransformation () override |
resets local transformation to identity. More... | |
virtual void | UpdateTransformation () override |
Recomputes the location of the selection aSelection. More... | |
virtual void | UpdateTransformations (const Handle< SelectMgr_Selection > &aSelection) |
Updates locations in all sensitive entities from <aSelection> and in corresponding entity owners. More... | |
virtual void | HilightSelected (const Handle< PrsMgr_PresentationManager3d > &PM, const SelectMgr_SequenceOfOwner &Seq) |
Method which draws selected owners ( for fast presentation draw ) More... | |
virtual void | ClearSelected () |
Method which clear all selected owners belonging to this selectable object ( for fast presentation draw ) More... | |
virtual void | HilightOwnerWithColor (const Handle< PrsMgr_PresentationManager3d > &thePM, const Quantity_NameOfColor theColor, const Handle< SelectMgr_EntityOwner > &theOwner) |
Method which hilight an owner belonging to this selectable object ( for fast presentation draw ) More... | |
virtual Standard_Boolean | IsAutoHilight () const |
If returns True, the old mechanism for highlighting selected objects is used (HilightSelected Method may be empty). If returns False, the HilightSelected method will be fully responsible for highlighting selected entity owners belonging to this selectable object. More... | |
virtual void | SetAutoHilight (const Standard_Boolean newAutoHilight) |
Set AutoHilight property to true or false Sets up Transform Persistence Mode for this object. More... | |
Handle< Prs3d_Presentation > | GetHilightPresentation (const Handle< PrsMgr_PresentationManager3d > &TheMgr) |
Handle< Prs3d_Presentation > | GetSelectPresentation (const Handle< PrsMgr_PresentationManager3d > &TheMgr) |
virtual void | SetZLayer (const Graphic3d_ZLayerId theLayerId) override |
Set Z layer ID and update all presentations of the selectable object. The layers mechanism allows drawing objects in higher layers in overlay of objects in lower layers. More... | |
void | UpdateSelection (const Standard_Integer theMode=-1) |
Sets update status FULL to selections of the object. Must be used as the only method of UpdateSelection from outer classes to prevent BVH structures from being outdated. More... | |
virtual void | SetAttributes (const Handle< Prs3d_Drawer > &theDrawer) |
Initializes the drawing tool theDrawer. More... | |
const Handle< Prs3d_Drawer > & | Attributes () const |
Returns the attributes settings. More... | |
virtual void | SetHilightAttributes (const Handle< Prs3d_Drawer > &theDrawer) |
Initializes the hilight drawing tool theDrawer. More... | |
const Handle< Prs3d_Drawer > & | HilightAttributes () const |
Returns the hilight attributes settings. More... | |
virtual void | UnsetHilightAttributes () |
Clears settings provided by the hilight drawing tool theDrawer. More... | |
void | SetAssemblyOwner (const Handle< SelectMgr_EntityOwner > &theOwner, const Standard_Integer theMode=-1) |
Sets common entity owner for assembly sensitive object entities. More... | |
const Handle< SelectMgr_EntityOwner > & | GetAssemblyOwner () const |
Returns common entity owner if the object is an assembly. More... | |
Bnd_Box | BndBoxOfSelected (Handle< SelectMgr_IndexedMapOfOwner > &theOwners) |
Returns a bounding box of sensitive entities with the owners given if they are a part of activated selection. More... | |
Standard_Integer | GlobalSelectionMode () const |
Returns the mode for selection of object as a whole. More... | |
virtual Handle< SelectMgr_EntityOwner > | GlobalSelOwner () const |
Returns the owner of mode for selection of object as a whole. More... | |
![]() | |
PrsMgr_Presentations & | Presentations () |
PrsMgr_TypeOfPresentation3d | TypeOfPresentation3d () const |
Returns information on whether the object accepts display in HLR mode or not. More... | |
virtual void | SetTransformPersistence (const Graphic3d_TransModeFlags &aFlag, const gp_Pnt &APoint) |
Sets up Transform Persistence Mode for this object. This function used to lock in object position, rotation and / or zooming relative to camera position. Object will be drawn in the origin setted by APoint parameter (except Graphic3d_TMF_TriedronPers flag. More... | |
void | SetTransformPersistence (const Graphic3d_TransModeFlags &aFlag) |
Calls previous method with point (0,0,0) More... | |
Graphic3d_TransModeFlags | GetTransformPersistenceMode () const |
Gets Transform Persistence Mode for this object. More... | |
gp_Pnt | GetTransformPersistencePoint () const |
Gets point of transform persistence for this object. More... | |
const Graphic3d_TransformPers & | TransformPersistence () const |
void | SetTypeOfPresentation (const PrsMgr_TypeOfPresentation3d aType) |
void | SetToUpdate (const Standard_Integer aMode) |
flags the Prs of mode <AMode> to be Updated. the Update will be done when needed. More... | |
void | SetToUpdate () |
flags all the Presentations to be Updated. More... | |
void | ToBeUpdated (TColStd_ListOfInteger &ListOfMode) const |
gives the list of modes which are flagged "to be updated". More... | |
virtual void | SetLocalTransformation (const gp_Trsf &theTransformation) |
Sets local transformation to theTransformation. More... | |
Standard_Boolean | HasTransformation () const |
Returns true if object has a transformation that is different from the identity. More... | |
const gp_Trsf & | LocalTransformation () const |
const gp_Trsf & | Transformation () const |
const gp_Trsf & | InversedTransformation () const |
virtual void | UpdateTransformation (const Handle< Prs3d_Presentation > &P) |
Graphic3d_ZLayerId | ZLayer () const |
Get ID of Z layer. More... | |
virtual void | AddClipPlane (const Handle< Graphic3d_ClipPlane > &thePlane) |
Adds clip plane for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be substracted from limit to predict the maximum possible number of object clipping planes. More... | |
virtual void | RemoveClipPlane (const Handle< Graphic3d_ClipPlane > &thePlane) |
Removes previously added clip plane. More... | |
virtual void | SetClipPlanes (const Graphic3d_SequenceOfHClipPlane &thePlanes) |
Set clip planes for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be substracted from limit to predict the maximum possible number of object clipping planes. More... | |
const Graphic3d_SequenceOfHClipPlane & | GetClipPlanes () const |
Get clip planes. More... | |
virtual void | SetMutable (const Standard_Boolean theIsMutable) |
Sets if the object has mutable nature (content or location will be changed regularly). This method should be called before object displaying to take effect. More... | |
Standard_Boolean | IsMutable () const |
Returns true if object has mutable nature (content or location are be changed regularly). Mutable object will be managed in different way than static onces (another optimizations). More... | |
virtual void | AddChild (const Handle< PrsMgr_PresentableObject > &theObject) |
Makes theObject child of current object in scene hierarchy. More... | |
virtual void | RemoveChild (const Handle< PrsMgr_PresentableObject > &theObject) |
Removes theObject from children of current object in scene hierarchy. More... | |
const PrsMgr_ListOfPresentableObjects & | Children () const |
Returns children of the current object. More... | |
Standard_Boolean | HasOwnPresentations () const |
Returns true if object should have own presentations. More... | |
PrsMgr_PresentableObjectPointer | Parent () const |
Returns parent of current object in scene hierarchy. More... | |
![]() | |
virtual void | Delete () const override |
Memory deallocator for transient classes. More... | |
![]() | |
Standard_Transient () | |
Empty constructor. More... | |
Standard_Transient (const Standard_Transient &) | |
Copy constructor – does nothing. More... | |
Standard_Transient & | operator= (const Standard_Transient &) |
Assignment operator, needed to avoid copying reference counter. More... | |
virtual | ~Standard_Transient () |
Destructor must be virtual. More... | |
virtual const opencascade::handle< Standard_Type > & | DynamicType () const |
Returns a type descriptor about this object. More... | |
Standard_Boolean | IsInstance (const opencascade::handle< Standard_Type > &theType) const |
Returns a true value if this is an instance of Type. More... | |
Standard_Boolean | IsInstance (const Standard_CString theTypeName) const |
Returns a true value if this is an instance of TypeName. More... | |
Standard_Boolean | IsKind (const opencascade::handle< Standard_Type > &theType) const |
Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
Standard_Boolean | IsKind (const Standard_CString theTypeName) const |
Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More... | |
Standard_Transient * | This () const |
Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More... | |
Standard_Integer | GetRefCount () const |
Get the reference counter of this object. More... | |
void | IncrementRefCounter () const |
Increments the reference counter of this object. More... | |
Standard_Integer | DecrementRefCounter () const |
Decrements the reference counter of this object; returns the decremented value. More... | |
Additional Inherited Members | |
![]() | |
typedef void | base_type |
Returns a type descriptor about this object. More... | |
![]() | |
static void | InitDefaultHilightAttributes (const Handle< Prs3d_Drawer > &theDrawer) |
Initializes theDrawer by default hilight settings. More... | |
![]() | |
static const char * | get_type_name () |
Returns a type descriptor about this object. More... | |
static const opencascade::handle< Standard_Type > & | get_type_descriptor () |
Returns type descriptor of Standard_Transient class. More... | |
![]() | |
AIS_Relation (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView) | |
void | ComputeProjEdgePresentation (const Handle< Prs3d_Presentation > &aPres, const TopoDS_Edge &anEdge, const Handle< Geom_Curve > &ProjCurve, const gp_Pnt &FirstP, const gp_Pnt &LastP, const Quantity_NameOfColor aColor=Quantity_NOC_PURPLE, const Standard_Real aWidth=2, const Aspect_TypeOfLine aProjTOL=Aspect_TOL_DASH, const Aspect_TypeOfLine aCallTOL=Aspect_TOL_DOT) const |
Calculates the presentation aPres of the the edge anEdge and the curve it defines, ProjCurve. The later is also specified by the first point FirstP and the last point LastP. The presentation includes settings for color aColor, type - aProjTOL and aCallTOL - and width of line, aWidth. More... | |
void | ComputeProjVertexPresentation (const Handle< Prs3d_Presentation > &aPres, const TopoDS_Vertex &aVertex, const gp_Pnt &ProjPoint, const Quantity_NameOfColor aColor=Quantity_NOC_PURPLE, const Standard_Real aWidth=2, const Aspect_TypeOfMarker aProjTOM=Aspect_TOM_PLUS, const Aspect_TypeOfLine aCallTOL=Aspect_TOL_DOT) const |
Calculates the presentation aPres of the the vertex aVertex and the point it defines, ProjPoint. The presentation includes settings for color aColor, type - aProjTOM and aCallTOL - and width of line, aWidth. More... | |
![]() | |
AIS_InteractiveObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView) | |
The TypeOfPresention3d means that the interactive object may have a presentation dependant of the view of Display. More... | |
![]() | |
SelectMgr_SelectableObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView) | |
void | setGlobalSelMode (const Standard_Integer theMode) |
![]() | |
PrsMgr_PresentableObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView) | |
virtual | ~PrsMgr_PresentableObject () |
void | Update (const Standard_Boolean AllModes=Standard_False) |
recomputes all presentations of the object. More... | |
void | Update (const Standard_Integer aMode, const Standard_Boolean ClearOther) |
Recomputes the presentation in the given mode. If ClearOther is true, other presentation will be cleared. More... | |
virtual void | Fill (const Handle< PrsMgr_PresentationManager > &aPresentationManager, const Handle< PrsMgr_Presentation > &aPresentation, const Standard_Integer aMode=0) |
High-level interface for controlling polygon offsets. More... | |
virtual void | SetCombinedParentTransform (const gp_Trsf &theTransformation) |
Sets myCombinedParentTransform to theTransformation. Thus object receives transformation from parent node and able to derive its own. More... | |
virtual void | UpdateClipping () |
General virtual method for internal update of presentation state when some modifications on list of clip planes occurs. Base implementation propagate clip planes to every presentation. More... | |
![]() | |
TopoDS_Shape | myFShape |
TopoDS_Shape | mySShape |
Handle< Geom_Plane > | myPlane |
Standard_Real | myVal |
gp_Pnt | myPosition |
TCollection_ExtendedString | myText |
Standard_Real | myArrowSize |
Standard_Boolean | myAutomaticPosition |
DsgPrs_ArrowSide | mySymbolPrs |
Standard_Integer | myExtShape |
gp_Pln | myFirstPlane |
gp_Pln | mySecondPlane |
Handle< Geom_Surface > | myFirstBasisSurf |
Handle< Geom_Surface > | mySecondBasisSurf |
AIS_KindOfSurface | myFirstSurfType |
AIS_KindOfSurface | mySecondSurfType |
Standard_Real | myFirstOffset |
Standard_Real | mySecondOffset |
Bnd_Box | myBndBox |
Standard_Boolean | myIsSetBndBox |
Standard_Boolean | myArrowSizeIsDefined |
![]() | |
Standard_Real | myTransparency |
Quantity_Color | myOwnColor |
Graphic3d_NameOfMaterial | myOwnMaterial |
Standard_Integer | myHilightMode |
Standard_Real | myOwnWidth |
Standard_Boolean | myInfiniteState |
Standard_Boolean | hasOwnColor |
Standard_Boolean | hasOwnMaterial |
Aspect_TypeOfFacingModel | myCurrentFacingModel |
Standard_Boolean | myRecomputeEveryPrs |
TColStd_ListOfInteger | myToRecomputeModes |
![]() | |
SelectMgr_SequenceOfSelection | myselections |
Handle< Prs3d_Drawer > | myDrawer |
Handle< Prs3d_Drawer > | myHilightDrawer |
Handle< SelectMgr_EntityOwner > | myAssemblyOwner |
![]() | |
PrsMgr_Presentations | myPresentations |
PrsMgr_TypeOfPresentation3d | myTypeOfPresentation3d |
Graphic3d_SequenceOfHClipPlane | myClipPlanes |
Standard_Boolean | myIsMutable |
Graphic3d_ZLayerId | myZLayer |
Standard_Boolean | myHasOwnPresentations |
A framework to display constraints of perpendicularity between two or more interactive datums. These datums can be edges or faces.
AIS_PerpendicularRelation::AIS_PerpendicularRelation | ( | const TopoDS_Shape & | aFShape, |
const TopoDS_Shape & | aSShape, | ||
const Handle< Geom_Plane > & | aPlane | ||
) |
Constructs an object to display constraints of perpendicularity on shapes. This object is defined by a first shape aFShape, a second shape aSShape, and a plane aPlane. aPlane is the plane of reference to show and test the perpendicular relation between two shapes, at least one of which has a revolved surface.
AIS_PerpendicularRelation::AIS_PerpendicularRelation | ( | const TopoDS_Shape & | aFShape, |
const TopoDS_Shape & | aSShape | ||
) |
Constructs an object to display constraints of perpendicularity on shapes. This object is defined by a first shape aFShape and a second shape aSShape.
|
overridevirtual |
computes the presentation according to a point of view given by <aProjector>. To be Used when the associated degenerated Presentations have been transformed by <aTrsf> which is not a Pure Translation. The HLR Prs can't be deducted automatically WARNING :<aTrsf> must be applied to the object to display before computation !!!
Reimplemented from PrsMgr_PresentableObject.