Open CASCADE Technology  7.0.0
Public Member Functions
IGESData_IGESReaderData Class Reference

specific FileReaderData for IGES contains header as GlobalSection, and for each Entity, its directory part as DirPart, list of Parameters as ParamSet Each Item has a DirPart, plus classically a ParamSet and the correspondant recognized Entity (inherited from FileReaderData) Parameters are accessed through specific objects, ParamReaders More...

#include <IGESData_IGESReaderData.hxx>

Inheritance diagram for IGESData_IGESReaderData:
Inheritance graph
[legend]

Public Member Functions

 IGESData_IGESReaderData (const Standard_Integer nbe, const Standard_Integer nbp)
 creates IGESReaderData correctly dimensionned (for arrays) <nbe> count of entities, that is, half nb of directory lines <nbp> : count of parameters More...
 
void AddStartLine (const Standard_CString aval)
 adds a start line to start section More...
 
Handle< TColStd_HSequenceOfHAsciiString > StartSection () const
 Returns the Start Section in once. More...
 
void AddGlobal (const Interface_ParamType atype, const Standard_CString aval)
 adds a parameter to global section's parameter list More...
 
void SetGlobalSection ()
 reads header (as GlobalSection) content from the ParamSet after it has been filled by successive calls to AddGlobal More...
 
const IGESData_GlobalSectionGlobalSection () const
 returns header as GlobalSection More...
 
void SetDirPart (const Standard_Integer num, const Standard_Integer i1, const Standard_Integer i2, const Standard_Integer i3, const Standard_Integer i4, const Standard_Integer i5, const Standard_Integer i6, const Standard_Integer i7, const Standard_Integer i8, const Standard_Integer i9, const Standard_Integer i10, const Standard_Integer i11, const Standard_Integer i12, const Standard_Integer i13, const Standard_Integer i14, const Standard_Integer i15, const Standard_Integer i16, const Standard_Integer i17, const Standard_CString res1, const Standard_CString res2, const Standard_CString label, const Standard_CString subs)
 fills a DirPart, designated by its rank (that is, (N+1)/2 if N is its first number in section D) More...
 
const IGESData_DirPartDirPart (const Standard_Integer num) const
 returns DirPart identified by record no (half Dsect number) More...
 
void DirValues (const Standard_Integer num, Standard_Integer &i1, Standard_Integer &i2, Standard_Integer &i3, Standard_Integer &i4, Standard_Integer &i5, Standard_Integer &i6, Standard_Integer &i7, Standard_Integer &i8, Standard_Integer &i9, Standard_Integer &i10, Standard_Integer &i11, Standard_Integer &i12, Standard_Integer &i13, Standard_Integer &i14, Standard_Integer &i15, Standard_Integer &i16, Standard_Integer &i17, Standard_CString &res1, Standard_CString &res2, Standard_CString &label, Standard_CString &subs) const
 returns values recorded in directory part n0 <num> More...
 
IGESData_IGESType DirType (const Standard_Integer num) const
 returns "type" and "form" info from a directory part More...
 
virtual Standard_Integer NbEntities () const override
 Returns count of recorded Entities (i.e. size of Directory) More...
 
Standard_Integer FindNextRecord (const Standard_Integer num) const override
 determines next suitable record from num; that is num+1 except for last one which gives 0 More...
 
void SetEntityNumbers ()
 determines reference numbers in EntityNumber fields (called by SetEntities from IGESReaderTool) works on "Integer" type Parameters, because IGES does not distinguish Integer and Entity Refs : every Integer which is odd and less than twice NbRecords can be an Entity Ref ... (Ref Number is then (N+1)/2 if N is the Integer Value) More...
 
Handle< Interface_CheckGlobalCheck () const
 Returns the recorded Global Check. More...
 
void SetDefaultLineWeight (const Standard_Real defw)
 allows to set a default line weight, will be later applied at load time, on Entities which have no specified line weight More...
 
Standard_Real DefaultLineWeight () const
 Returns the recorded Default Line Weight, if there is (else, returns 0) More...
 
- Public Member Functions inherited from Interface_FileReaderData
virtual Standard_Integer NbRecords () const
 Returns the count of registered records That is, value given for Initialization (can be redefined) More...
 
void InitParams (const Standard_Integer num)
 attaches an empty ParamList to a Record More...
 
void AddParam (const Standard_Integer num, const Standard_CString aval, const Interface_ParamType atype, const Standard_Integer nument=0)
 Adds a parameter to record no "num" and fills its fields (EntityNumber is optional) Warning : <aval> is assumed to be memory-managed elsewhere : it is NOT copied. This gives a best speed : strings remain stored in pages of characters. More...
 
void AddParam (const Standard_Integer num, const TCollection_AsciiString &aval, const Interface_ParamType atype, const Standard_Integer nument=0)
 Same as above, but gets a AsciiString from TCollection Remark that the content of the AsciiString is locally copied (because its content is most often lost after using) More...
 
void AddParam (const Standard_Integer num, const Interface_FileParameter &FP)
 Same as above, but gets a complete FileParameter Warning : Content of <FP> is NOT copied : its original address and space in memory are assumed to be managed elsewhere (see ParamSet) More...
 
void SetParam (const Standard_Integer num, const Standard_Integer nump, const Interface_FileParameter &FP)
 Sets a new value for a parameter of a record, given by : num : record number; nump : parameter number in the record. More...
 
Standard_Integer NbParams (const Standard_Integer num) const
 Returns count of parameters attached to record "num" If <num> = 0, returns the total recorded count of parameters. More...
 
Handle< Interface_ParamListParams (const Standard_Integer num) const
 Returns the complete ParamList of a record (read only) num = 0 to return the whole param list for the file. More...
 
const Interface_FileParameterParam (const Standard_Integer num, const Standard_Integer nump) const
 Returns parameter "nump" of record "num", as a complete FileParameter. More...
 
Interface_FileParameterChangeParam (const Standard_Integer num, const Standard_Integer nump)
 Same as above, but in order to be modified on place. More...
 
Interface_ParamType ParamType (const Standard_Integer num, const Standard_Integer nump) const
 Returns type of parameter "nump" of record "num" Returns literal value of parameter "nump" of record "num" was C++ : return const &. More...
 
Standard_CString ParamCValue (const Standard_Integer num, const Standard_Integer nump) const
 Same as above, but as a CString was C++ : return const. More...
 
Standard_Boolean IsParamDefined (const Standard_Integer num, const Standard_Integer nump) const
 Returns True if parameter "nump" of record "num" is defined (it is not if its type is ParamVoid) More...
 
Standard_Integer ParamNumber (const Standard_Integer num, const Standard_Integer nump) const
 Returns record number of an entity referenced by a parameter of type Ident; 0 if no EntityNumber has been determined Note that it is used to reference Entities but also Sublists (sublists are not objects, but internal descriptions) More...
 
const Handle< Standard_Transient > & ParamEntity (const Standard_Integer num, const Standard_Integer nump) const
 Returns the StepEntity referenced by a parameter Error if none. More...
 
Standard_Integer ParamFirstRank (const Standard_Integer num) const
 Returns the absolute rank of the beginning of a record (its lsit is from ParamFirstRank+1 to ParamFirstRank+NbParams) More...
 
const Handle< Standard_Transient > & BoundEntity (const Standard_Integer num) const
 Returns the entity bound to a record, set by SetEntities. More...
 
void BindEntity (const Standard_Integer num, const Handle< Standard_Transient > &ent)
 Binds an entity to a record. More...
 
void SetErrorLoad (const Standard_Boolean val)
 Sets the status "Error Load" on, to overside check fails <val> True : declares unloaded <val> False : declares loaded If not called before loading (see FileReaderTool), check fails give the status IsErrorLoad says if SetErrorLoad has been called by user ResetErrorLoad resets it (called by FileReaderTool) This allows to specify that the currently loaded entity remains unloaded (because of syntactic fail) More...
 
Standard_Boolean IsErrorLoad () const
 Returns True if the status "Error Load" has been set (to True or False) More...
 
Standard_Boolean ResetErrorLoad ()
 Returns the former value of status "Error Load" then resets it Used to read the status then ensure it is reset. More...
 
void Destroy ()
 Destructor (waiting for memory management) More...
 
 ~Interface_FileReaderData ()
 
- Public Member Functions inherited from MMgt_TShared
virtual void Delete () const override
 Memory deallocator for transient classes. More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Static Public Member Functions inherited from Interface_FileReaderData
static Standard_Real Fastof (const Standard_CString str)
 Same spec.s as standard <atof> but 5 times faster. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 
- Protected Member Functions inherited from Interface_FileReaderData
 Interface_FileReaderData (const Standard_Integer nbr, const Standard_Integer npar)
 Initializes arrays of Entities and of ParamLists attached to registered records <nbr> must be the maximum number of records to get (no way to extend it at run-time) : count entities and sub-entities ... <npar> is the total count of parameters (if it is not exact, it will be extented as necessary) More...
 
Interface_FileParameterChangeParameter (const Standard_Integer numpar)
 Returns a parameter given its absolute rank in the file in order to be consulted or modified in specilaized actions. More...
 
void ParamPosition (const Standard_Integer numpar, Standard_Integer &num, Standard_Integer &nump) const
 For a given absolute rank of parameter, determines the record to which its belongs, and the parameter number for it. More...
 

Detailed Description

specific FileReaderData for IGES contains header as GlobalSection, and for each Entity, its directory part as DirPart, list of Parameters as ParamSet Each Item has a DirPart, plus classically a ParamSet and the correspondant recognized Entity (inherited from FileReaderData) Parameters are accessed through specific objects, ParamReaders

Constructor & Destructor Documentation

IGESData_IGESReaderData::IGESData_IGESReaderData ( const Standard_Integer  nbe,
const Standard_Integer  nbp 
)

creates IGESReaderData correctly dimensionned (for arrays) <nbe> count of entities, that is, half nb of directory lines <nbp> : count of parameters

Member Function Documentation

void IGESData_IGESReaderData::AddGlobal ( const Interface_ParamType  atype,
const Standard_CString  aval 
)

adds a parameter to global section's parameter list

void IGESData_IGESReaderData::AddStartLine ( const Standard_CString  aval)

adds a start line to start section

Standard_Real IGESData_IGESReaderData::DefaultLineWeight ( ) const

Returns the recorded Default Line Weight, if there is (else, returns 0)

const IGESData_DirPart& IGESData_IGESReaderData::DirPart ( const Standard_Integer  num) const

returns DirPart identified by record no (half Dsect number)

IGESData_IGESType IGESData_IGESReaderData::DirType ( const Standard_Integer  num) const

returns "type" and "form" info from a directory part

void IGESData_IGESReaderData::DirValues ( const Standard_Integer  num,
Standard_Integer i1,
Standard_Integer i2,
Standard_Integer i3,
Standard_Integer i4,
Standard_Integer i5,
Standard_Integer i6,
Standard_Integer i7,
Standard_Integer i8,
Standard_Integer i9,
Standard_Integer i10,
Standard_Integer i11,
Standard_Integer i12,
Standard_Integer i13,
Standard_Integer i14,
Standard_Integer i15,
Standard_Integer i16,
Standard_Integer i17,
Standard_CString res1,
Standard_CString res2,
Standard_CString label,
Standard_CString subs 
) const

returns values recorded in directory part n0 <num>

Standard_Integer IGESData_IGESReaderData::FindNextRecord ( const Standard_Integer  num) const
overridevirtual

determines next suitable record from num; that is num+1 except for last one which gives 0

Implements Interface_FileReaderData.

Handle< Interface_Check > IGESData_IGESReaderData::GlobalCheck ( ) const

Returns the recorded Global Check.

const IGESData_GlobalSection& IGESData_IGESReaderData::GlobalSection ( ) const

returns header as GlobalSection

virtual Standard_Integer IGESData_IGESReaderData::NbEntities ( ) const
overridevirtual

Returns count of recorded Entities (i.e. size of Directory)

Reimplemented from Interface_FileReaderData.

void IGESData_IGESReaderData::SetDefaultLineWeight ( const Standard_Real  defw)

allows to set a default line weight, will be later applied at load time, on Entities which have no specified line weight

void IGESData_IGESReaderData::SetDirPart ( const Standard_Integer  num,
const Standard_Integer  i1,
const Standard_Integer  i2,
const Standard_Integer  i3,
const Standard_Integer  i4,
const Standard_Integer  i5,
const Standard_Integer  i6,
const Standard_Integer  i7,
const Standard_Integer  i8,
const Standard_Integer  i9,
const Standard_Integer  i10,
const Standard_Integer  i11,
const Standard_Integer  i12,
const Standard_Integer  i13,
const Standard_Integer  i14,
const Standard_Integer  i15,
const Standard_Integer  i16,
const Standard_Integer  i17,
const Standard_CString  res1,
const Standard_CString  res2,
const Standard_CString  label,
const Standard_CString  subs 
)

fills a DirPart, designated by its rank (that is, (N+1)/2 if N is its first number in section D)

void IGESData_IGESReaderData::SetEntityNumbers ( )

determines reference numbers in EntityNumber fields (called by SetEntities from IGESReaderTool) works on "Integer" type Parameters, because IGES does not distinguish Integer and Entity Refs : every Integer which is odd and less than twice NbRecords can be an Entity Ref ... (Ref Number is then (N+1)/2 if N is the Integer Value)

void IGESData_IGESReaderData::SetGlobalSection ( )

reads header (as GlobalSection) content from the ParamSet after it has been filled by successive calls to AddGlobal

Handle< TColStd_HSequenceOfHAsciiString > IGESData_IGESReaderData::StartSection ( ) const

Returns the Start Section in once.


The documentation for this class was generated from the following file: