Open CASCADE Technology  7.2.0
Public Member Functions
BRepAdaptor_Curve Class Reference

The Curve from BRepAdaptor allows to use an Edge of the BRep topology like a 3D curve. More...

#include <BRepAdaptor_Curve.hxx>

Inheritance diagram for BRepAdaptor_Curve:
Inheritance graph
[legend]

Public Member Functions

 BRepAdaptor_Curve ()
 Creates an undefined Curve with no Edge loaded. More...
 
 BRepAdaptor_Curve (const TopoDS_Edge &E)
 Creates a Curve to acces to the geometry of edge <E>. More...
 
 BRepAdaptor_Curve (const TopoDS_Edge &E, const TopoDS_Face &F)
 Creates a Curve to acces to the geometry of edge <E>. The geometry will be computed using the parametric curve of <E> on the face <F>. An Error is raised if the edge does not have a pcurve on the face. More...
 
void Initialize (const TopoDS_Edge &E)
 Sets the Curve <me> to acces to the geometry of edge <E>. More...
 
void Initialize (const TopoDS_Edge &E, const TopoDS_Face &F)
 Sets the Curve <me> to acces to the geometry of edge <E>. The geometry will be computed using the parametric curve of <E> on the face <F>. An Error is raised if the edge does not have a pcurve on the face. More...
 
const gp_TrsfTrsf () const
 Returns the coordinate system of the curve. More...
 
Standard_Boolean Is3DCurve () const
 Returns True if the edge geometry is computed from a 3D curve. More...
 
Standard_Boolean IsCurveOnSurface () const
 Returns True if the edge geometry is computed from a pcurve on a surface. More...
 
const GeomAdaptor_CurveCurve () const
 Returns the Curve of the edge. More...
 
const Adaptor3d_CurveOnSurfaceCurveOnSurface () const
 Returns the CurveOnSurface of the edge. More...
 
const TopoDS_EdgeEdge () const
 Returns the edge. More...
 
Standard_Real Tolerance () const
 Returns the edge tolerance. More...
 
Standard_Real FirstParameter () const override
 
Standard_Real LastParameter () const override
 
GeomAbs_Shape Continuity () const override
 
Standard_Integer NbIntervals (const GeomAbs_Shape S) const override
 Returns the number of intervals for continuity <S>. May be one if Continuity(me) >= <S> More...
 
void Intervals (TColStd_Array1OfReal &T, const GeomAbs_Shape S) const override
 Stores in <T> the parameters bounding the intervals of continuity <S>. More...
 
Handle< Adaptor3d_HCurveTrim (const Standard_Real First, const Standard_Real Last, const Standard_Real Tol) const override
 Returns a curve equivalent of <me> between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last> More...
 
Standard_Boolean IsClosed () const override
 
Standard_Boolean IsPeriodic () const override
 
Standard_Real Period () const override
 
gp_Pnt Value (const Standard_Real U) const override
 Computes the point of parameter U on the curve. More...
 
void D0 (const Standard_Real U, gp_Pnt &P) const override
 Computes the point of parameter U. More...
 
void D1 (const Standard_Real U, gp_Pnt &P, gp_Vec &V) const override
 Computes the point of parameter U on the curve with its first derivative. Raised if the continuity of the current interval is not C1. More...
 
void D2 (const Standard_Real U, gp_Pnt &P, gp_Vec &V1, gp_Vec &V2) const override
 Returns the point P of parameter U, the first and second derivatives V1 and V2. Raised if the continuity of the current interval is not C2. More...
 
void D3 (const Standard_Real U, gp_Pnt &P, gp_Vec &V1, gp_Vec &V2, gp_Vec &V3) const override
 Returns the point P of parameter U, the first, the second and the third derivative. Raised if the continuity of the current interval is not C3. More...
 
gp_Vec DN (const Standard_Real U, const Standard_Integer N) const override
 The returned vector gives the value of the derivative for the order of derivation N. Raised if the continuity of the current interval is not CN. Raised if N < 1. More...
 
Standard_Real Resolution (const Standard_Real R3d) const override
 returns the parametric resolution More...
 
GeomAbs_CurveType GetType () const override
 Returns the type of the curve in the current interval : Line, Circle, Ellipse, Hyperbola, Parabola, BezierCurve, BSplineCurve, OtherCurve. More...
 
gp_Lin Line () const override
 
gp_Circ Circle () const override
 
gp_Elips Ellipse () const override
 
gp_Hypr Hyperbola () const override
 
gp_Parab Parabola () const override
 
Standard_Integer Degree () const override
 
Standard_Boolean IsRational () const override
 
Standard_Integer NbPoles () const override
 
Standard_Integer NbKnots () const override
 
Handle< Geom_BezierCurveBezier () const override
 Warning : This will make a copy of the Bezier Curve since it applies to it myTsrf . Be carefull when using this method. More...
 
Handle< Geom_BSplineCurveBSpline () const override
 Warning : This will make a copy of the BSpline Curve since it applies to it myTsrf . Be carefull when using this method. More...
 
Handle< Geom_OffsetCurveOffsetCurve () const override
 
- Public Member Functions inherited from Adaptor3d_Curve
virtual ~Adaptor3d_Curve ()
 

Detailed Description

The Curve from BRepAdaptor allows to use an Edge of the BRep topology like a 3D curve.

It has the methods the class Curve from Adaptor3d.

It is created or Initialized with an Edge. It takes into account local coordinate systems. If the Edge has a 3D curve it is use with priority. If the edge has no 3D curve one of the curves on surface is used. It is possible to enforce using a curve on surface by creating or initialising with an Edge and a Face.

Constructor & Destructor Documentation

◆ BRepAdaptor_Curve() [1/3]

BRepAdaptor_Curve::BRepAdaptor_Curve ( )

Creates an undefined Curve with no Edge loaded.

◆ BRepAdaptor_Curve() [2/3]

BRepAdaptor_Curve::BRepAdaptor_Curve ( const TopoDS_Edge E)

Creates a Curve to acces to the geometry of edge <E>.

◆ BRepAdaptor_Curve() [3/3]

BRepAdaptor_Curve::BRepAdaptor_Curve ( const TopoDS_Edge E,
const TopoDS_Face F 
)

Creates a Curve to acces to the geometry of edge <E>. The geometry will be computed using the parametric curve of <E> on the face <F>. An Error is raised if the edge does not have a pcurve on the face.

Member Function Documentation

◆ Bezier()

Handle< Geom_BezierCurve > BRepAdaptor_Curve::Bezier ( ) const
overridevirtual

Warning : This will make a copy of the Bezier Curve since it applies to it myTsrf . Be carefull when using this method.

Reimplemented from Adaptor3d_Curve.

◆ BSpline()

Handle< Geom_BSplineCurve > BRepAdaptor_Curve::BSpline ( ) const
overridevirtual

Warning : This will make a copy of the BSpline Curve since it applies to it myTsrf . Be carefull when using this method.

Reimplemented from Adaptor3d_Curve.

◆ Circle()

gp_Circ BRepAdaptor_Curve::Circle ( ) const
overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Continuity()

GeomAbs_Shape BRepAdaptor_Curve::Continuity ( ) const
overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Curve()

const GeomAdaptor_Curve& BRepAdaptor_Curve::Curve ( ) const

Returns the Curve of the edge.

◆ CurveOnSurface()

const Adaptor3d_CurveOnSurface& BRepAdaptor_Curve::CurveOnSurface ( ) const

Returns the CurveOnSurface of the edge.

◆ D0()

void BRepAdaptor_Curve::D0 ( const Standard_Real  U,
gp_Pnt P 
) const
overridevirtual

Computes the point of parameter U.

Reimplemented from Adaptor3d_Curve.

◆ D1()

void BRepAdaptor_Curve::D1 ( const Standard_Real  U,
gp_Pnt P,
gp_Vec V 
) const
overridevirtual

Computes the point of parameter U on the curve with its first derivative. Raised if the continuity of the current interval is not C1.

Reimplemented from Adaptor3d_Curve.

◆ D2()

void BRepAdaptor_Curve::D2 ( const Standard_Real  U,
gp_Pnt P,
gp_Vec V1,
gp_Vec V2 
) const
overridevirtual

Returns the point P of parameter U, the first and second derivatives V1 and V2. Raised if the continuity of the current interval is not C2.

Reimplemented from Adaptor3d_Curve.

◆ D3()

void BRepAdaptor_Curve::D3 ( const Standard_Real  U,
gp_Pnt P,
gp_Vec V1,
gp_Vec V2,
gp_Vec V3 
) const
overridevirtual

Returns the point P of parameter U, the first, the second and the third derivative. Raised if the continuity of the current interval is not C3.

Reimplemented from Adaptor3d_Curve.

◆ Degree()

Standard_Integer BRepAdaptor_Curve::Degree ( ) const
overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ DN()

gp_Vec BRepAdaptor_Curve::DN ( const Standard_Real  U,
const Standard_Integer  N 
) const
overridevirtual

The returned vector gives the value of the derivative for the order of derivation N. Raised if the continuity of the current interval is not CN. Raised if N < 1.

Reimplemented from Adaptor3d_Curve.

◆ Edge()

const TopoDS_Edge& BRepAdaptor_Curve::Edge ( ) const

Returns the edge.

◆ Ellipse()

gp_Elips BRepAdaptor_Curve::Ellipse ( ) const
overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ FirstParameter()

Standard_Real BRepAdaptor_Curve::FirstParameter ( ) const
overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ GetType()

GeomAbs_CurveType BRepAdaptor_Curve::GetType ( ) const
overridevirtual

Returns the type of the curve in the current interval : Line, Circle, Ellipse, Hyperbola, Parabola, BezierCurve, BSplineCurve, OtherCurve.

Reimplemented from Adaptor3d_Curve.

◆ Hyperbola()

gp_Hypr BRepAdaptor_Curve::Hyperbola ( ) const
overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Initialize() [1/2]

void BRepAdaptor_Curve::Initialize ( const TopoDS_Edge E)

Sets the Curve <me> to acces to the geometry of edge <E>.

◆ Initialize() [2/2]

void BRepAdaptor_Curve::Initialize ( const TopoDS_Edge E,
const TopoDS_Face F 
)

Sets the Curve <me> to acces to the geometry of edge <E>. The geometry will be computed using the parametric curve of <E> on the face <F>. An Error is raised if the edge does not have a pcurve on the face.

◆ Intervals()

void BRepAdaptor_Curve::Intervals ( TColStd_Array1OfReal T,
const GeomAbs_Shape  S 
) const
overridevirtual

Stores in <T> the parameters bounding the intervals of continuity <S>.

The array must provide enough room to accomodate for the parameters. i.e. T.Length() > NbIntervals()

Reimplemented from Adaptor3d_Curve.

◆ Is3DCurve()

Standard_Boolean BRepAdaptor_Curve::Is3DCurve ( ) const

Returns True if the edge geometry is computed from a 3D curve.

◆ IsClosed()

Standard_Boolean BRepAdaptor_Curve::IsClosed ( ) const
overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ IsCurveOnSurface()

Standard_Boolean BRepAdaptor_Curve::IsCurveOnSurface ( ) const

Returns True if the edge geometry is computed from a pcurve on a surface.

◆ IsPeriodic()

Standard_Boolean BRepAdaptor_Curve::IsPeriodic ( ) const
overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ IsRational()

Standard_Boolean BRepAdaptor_Curve::IsRational ( ) const
overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ LastParameter()

Standard_Real BRepAdaptor_Curve::LastParameter ( ) const
overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Line()

gp_Lin BRepAdaptor_Curve::Line ( ) const
overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ NbIntervals()

Standard_Integer BRepAdaptor_Curve::NbIntervals ( const GeomAbs_Shape  S) const
overridevirtual

Returns the number of intervals for continuity <S>. May be one if Continuity(me) >= <S>

Reimplemented from Adaptor3d_Curve.

◆ NbKnots()

Standard_Integer BRepAdaptor_Curve::NbKnots ( ) const
overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ NbPoles()

Standard_Integer BRepAdaptor_Curve::NbPoles ( ) const
overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ OffsetCurve()

Handle< Geom_OffsetCurve > BRepAdaptor_Curve::OffsetCurve ( ) const
overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Parabola()

gp_Parab BRepAdaptor_Curve::Parabola ( ) const
overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Period()

Standard_Real BRepAdaptor_Curve::Period ( ) const
overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Resolution()

Standard_Real BRepAdaptor_Curve::Resolution ( const Standard_Real  R3d) const
overridevirtual

returns the parametric resolution

Reimplemented from Adaptor3d_Curve.

◆ Tolerance()

Standard_Real BRepAdaptor_Curve::Tolerance ( ) const

Returns the edge tolerance.

◆ Trim()

Handle< Adaptor3d_HCurve > BRepAdaptor_Curve::Trim ( const Standard_Real  First,
const Standard_Real  Last,
const Standard_Real  Tol 
) const
overridevirtual

Returns a curve equivalent of <me> between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last>

Reimplemented from Adaptor3d_Curve.

◆ Trsf()

const gp_Trsf& BRepAdaptor_Curve::Trsf ( ) const

Returns the coordinate system of the curve.

◆ Value()

gp_Pnt BRepAdaptor_Curve::Value ( const Standard_Real  U) const
overridevirtual

Computes the point of parameter U on the curve.

Reimplemented from Adaptor3d_Curve.


The documentation for this class was generated from the following file: