Open CASCADE Technology  7.5.0
Public Member Functions | Static Public Member Functions | Friends
NCollection_Vec3< Element_t > Class Template Reference

Generic 3-components vector. To be used as RGB color pixel or XYZ 3D-point. The main target for this class - to handle raw low-level arrays (from/to graphic driver etc.). More...

#include <NCollection_Vec3.hxx>

Public Member Functions

 NCollection_Vec3 ()
 Empty constructor. Construct the zero vector. More...
 
 NCollection_Vec3 (Element_t theValue)
 Initialize ALL components of vector within specified value. More...
 
 NCollection_Vec3 (const Element_t theX, const Element_t theY, const Element_t theZ)
 Per-component constructor. More...
 
 NCollection_Vec3 (const NCollection_Vec2< Element_t > &theVec2, Element_t theZ=Element_t(0))
 Constructor from 2-components vector + optional 3rd value. More...
 
template<typename OtherElement_t >
 NCollection_Vec3 (const NCollection_Vec3< OtherElement_t > &theOtherVec3)
 Conversion constructor (explicitly converts some 3-component vector with other element type to a new 3-component vector with the element type Element_t, whose elements are static_cast'ed corresponding elements of theOtherVec3 vector) More...
 
void SetValues (const Element_t theX, const Element_t theY, const Element_t theZ)
 Assign new values to the vector. More...
 
void SetValues (const NCollection_Vec2< Element_t > &theVec2, Element_t theZ)
 Assign new values to the vector. More...
 
Element_t x () const
 Alias to 1st component as X coordinate in XYZ. More...
 
Element_t r () const
 Alias to 1st component as RED channel in RGB. More...
 
Element_t y () const
 Alias to 2nd component as Y coordinate in XYZ. More...
 
Element_t g () const
 Alias to 2nd component as GREEN channel in RGB. More...
 
Element_t z () const
 Alias to 3rd component as Z coordinate in XYZ. More...
 
Element_t b () const
 Alias to 3rd component as BLUE channel in RGB. More...
 
Element_t & x ()
 Alias to 1st component as X coordinate in XYZ. More...
 
Element_t & r ()
 Alias to 1st component as RED channel in RGB. More...
 
Element_t & y ()
 Alias to 2nd component as Y coordinate in XYZ. More...
 
Element_t & g ()
 Alias to 2nd component as GREEN channel in RGB. More...
 
Element_t & z ()
 Alias to 3rd component as Z coordinate in XYZ. More...
 
Element_t & b ()
 Alias to 3rd component as BLUE channel in RGB. More...
 
bool IsEqual (const NCollection_Vec3 &theOther) const
 Check this vector with another vector for equality (without tolerance!). More...
 
bool operator== (const NCollection_Vec3 &theOther)
 Check this vector with another vector for equality (without tolerance!). More...
 
bool operator== (const NCollection_Vec3 &theOther) const
 
bool operator!= (const NCollection_Vec3 &theOther)
 Check this vector with another vector for non-equality (without tolerance!). More...
 
bool operator!= (const NCollection_Vec3 &theOther) const
 
const Element_t * GetData () const
 Raw access to the data (for OpenGL exchange). More...
 
Element_t * ChangeData ()
 
 operator const Element_t * () const
 
 operator Element_t * ()
 
NCollection_Vec3operator+= (const NCollection_Vec3 &theAdd)
 Compute per-component summary. More...
 
NCollection_Vec3 operator- () const
 Unary -. More...
 
NCollection_Vec3operator-= (const NCollection_Vec3 &theDec)
 Compute per-component subtraction. More...
 
void Multiply (const Element_t theFactor)
 Compute per-component multiplication by scale factor. More...
 
NCollection_Vec3operator*= (const NCollection_Vec3 &theRight)
 Compute per-component multiplication. More...
 
NCollection_Vec3operator*= (const Element_t theFactor)
 Compute per-component multiplication by scale factor. More...
 
NCollection_Vec3 operator* (const Element_t theFactor) const
 Compute per-component multiplication by scale factor. More...
 
NCollection_Vec3 Multiplied (const Element_t theFactor) const
 Compute per-component multiplication by scale factor. More...
 
NCollection_Vec3 cwiseMin (const NCollection_Vec3 &theVec) const
 Compute component-wise minimum of two vectors. More...
 
NCollection_Vec3 cwiseMax (const NCollection_Vec3 &theVec) const
 Compute component-wise maximum of two vectors. More...
 
NCollection_Vec3 cwiseAbs () const
 Compute component-wise modulus of the vector. More...
 
Element_t maxComp () const
 Compute maximum component of the vector. More...
 
Element_t minComp () const
 Compute minimum component of the vector. More...
 
NCollection_Vec3operator/= (const Element_t theInvFactor)
 Compute per-component division by scale factor. More...
 
NCollection_Vec3operator/= (const NCollection_Vec3 &theRight)
 Compute per-component division. More...
 
NCollection_Vec3 operator/ (const Element_t theInvFactor) const
 Compute per-component division by scale factor. More...
 
Element_t Dot (const NCollection_Vec3 &theOther) const
 Computes the dot product. More...
 
Element_t Modulus () const
 Computes the vector modulus (magnitude, length). More...
 
Element_t SquareModulus () const
 Computes the square of vector modulus (magnitude, length). This method may be used for performance tricks. More...
 
void Normalize ()
 Normalize the vector. More...
 
NCollection_Vec3 Normalized () const
 Normalize the vector. More...
 
void DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const
 Dumps the content of me into the stream. More...
 
template<>
NCollection_Vec3< double > & operator/= (const double theInvFactor)
 Optimized concretization for double type. More...
 

Static Public Member Functions

static int Length ()
 Returns the number of components. More...
 
static NCollection_Vec3 Cross (const NCollection_Vec3 &theVec1, const NCollection_Vec3 &theVec2)
 Computes the cross product. More...
 
static NCollection_Vec3 GetLERP (const NCollection_Vec3 &theFrom, const NCollection_Vec3 &theTo, const Element_t theT)
 Compute linear interpolation between to vectors. More...
 
static NCollection_Vec3 DX ()
 Constuct DX unit vector. More...
 
static NCollection_Vec3 DY ()
 Constuct DY unit vector. More...
 
static NCollection_Vec3 DZ ()
 Constuct DZ unit vector. More...
 

Friends

NCollection_Vec3 operator+ (const NCollection_Vec3 &theLeft, const NCollection_Vec3 &theRight)
 Compute per-component summary. More...
 
NCollection_Vec3 operator- (const NCollection_Vec3 &theLeft, const NCollection_Vec3 &theRight)
 Compute per-component subtraction. More...
 
NCollection_Vec3 operator* (const NCollection_Vec3 &theLeft, const NCollection_Vec3 &theRight)
 Compute per-component multiplication. More...
 
NCollection_Vec3 operator/ (const NCollection_Vec3 &theLeft, const NCollection_Vec3 &theRight)
 Compute per-component division. More...
 

Detailed Description

template<typename Element_t>
class NCollection_Vec3< Element_t >

Generic 3-components vector. To be used as RGB color pixel or XYZ 3D-point. The main target for this class - to handle raw low-level arrays (from/to graphic driver etc.).

Constructor & Destructor Documentation

◆ NCollection_Vec3() [1/5]

template<typename Element_t>
NCollection_Vec3< Element_t >::NCollection_Vec3 ( )
inline

Empty constructor. Construct the zero vector.

◆ NCollection_Vec3() [2/5]

template<typename Element_t>
NCollection_Vec3< Element_t >::NCollection_Vec3 ( Element_t  theValue)
inlineexplicit

Initialize ALL components of vector within specified value.

◆ NCollection_Vec3() [3/5]

template<typename Element_t>
NCollection_Vec3< Element_t >::NCollection_Vec3 ( const Element_t  theX,
const Element_t  theY,
const Element_t  theZ 
)
inlineexplicit

Per-component constructor.

◆ NCollection_Vec3() [4/5]

template<typename Element_t>
NCollection_Vec3< Element_t >::NCollection_Vec3 ( const NCollection_Vec2< Element_t > &  theVec2,
Element_t  theZ = Element_t(0) 
)
inlineexplicit

Constructor from 2-components vector + optional 3rd value.

◆ NCollection_Vec3() [5/5]

template<typename Element_t>
template<typename OtherElement_t >
NCollection_Vec3< Element_t >::NCollection_Vec3 ( const NCollection_Vec3< OtherElement_t > &  theOtherVec3)
inlineexplicit

Conversion constructor (explicitly converts some 3-component vector with other element type to a new 3-component vector with the element type Element_t, whose elements are static_cast'ed corresponding elements of theOtherVec3 vector)

Template Parameters
OtherElement_tthe element type of the other 3-component vector theOtherVec3
Parameters
theOtherVec3the 3-component vector that needs to be converted

Member Function Documentation

◆ b() [1/2]

template<typename Element_t>
Element_t NCollection_Vec3< Element_t >::b ( ) const
inline

Alias to 3rd component as BLUE channel in RGB.

◆ b() [2/2]

template<typename Element_t>
Element_t& NCollection_Vec3< Element_t >::b ( )
inline

Alias to 3rd component as BLUE channel in RGB.

◆ ChangeData()

template<typename Element_t>
Element_t* NCollection_Vec3< Element_t >::ChangeData ( )
inline

◆ Cross()

template<typename Element_t>
static NCollection_Vec3 NCollection_Vec3< Element_t >::Cross ( const NCollection_Vec3< Element_t > &  theVec1,
const NCollection_Vec3< Element_t > &  theVec2 
)
inlinestatic

Computes the cross product.

◆ cwiseAbs()

template<typename Element_t>
NCollection_Vec3 NCollection_Vec3< Element_t >::cwiseAbs ( ) const
inline

Compute component-wise modulus of the vector.

◆ cwiseMax()

template<typename Element_t>
NCollection_Vec3 NCollection_Vec3< Element_t >::cwiseMax ( const NCollection_Vec3< Element_t > &  theVec) const
inline

Compute component-wise maximum of two vectors.

◆ cwiseMin()

template<typename Element_t>
NCollection_Vec3 NCollection_Vec3< Element_t >::cwiseMin ( const NCollection_Vec3< Element_t > &  theVec) const
inline

Compute component-wise minimum of two vectors.

◆ Dot()

template<typename Element_t>
Element_t NCollection_Vec3< Element_t >::Dot ( const NCollection_Vec3< Element_t > &  theOther) const
inline

Computes the dot product.

◆ DumpJson()

template<typename Element_t>
void NCollection_Vec3< Element_t >::DumpJson ( Standard_OStream theOStream,
Standard_Integer  theDepth = -1 
) const
inline

Dumps the content of me into the stream.

◆ DX()

template<typename Element_t>
static NCollection_Vec3 NCollection_Vec3< Element_t >::DX ( )
inlinestatic

Constuct DX unit vector.

◆ DY()

template<typename Element_t>
static NCollection_Vec3 NCollection_Vec3< Element_t >::DY ( )
inlinestatic

Constuct DY unit vector.

◆ DZ()

template<typename Element_t>
static NCollection_Vec3 NCollection_Vec3< Element_t >::DZ ( )
inlinestatic

Constuct DZ unit vector.

◆ g() [1/2]

template<typename Element_t>
Element_t NCollection_Vec3< Element_t >::g ( ) const
inline

Alias to 2nd component as GREEN channel in RGB.

◆ g() [2/2]

template<typename Element_t>
Element_t& NCollection_Vec3< Element_t >::g ( )
inline

Alias to 2nd component as GREEN channel in RGB.

◆ GetData()

template<typename Element_t>
const Element_t* NCollection_Vec3< Element_t >::GetData ( ) const
inline

Raw access to the data (for OpenGL exchange).

◆ GetLERP()

template<typename Element_t>
static NCollection_Vec3 NCollection_Vec3< Element_t >::GetLERP ( const NCollection_Vec3< Element_t > &  theFrom,
const NCollection_Vec3< Element_t > &  theTo,
const Element_t  theT 
)
inlinestatic

Compute linear interpolation between to vectors.

Parameters
theT- interpolation coefficient 0..1;
Returns
interpolation result.

◆ IsEqual()

template<typename Element_t>
bool NCollection_Vec3< Element_t >::IsEqual ( const NCollection_Vec3< Element_t > &  theOther) const
inline

Check this vector with another vector for equality (without tolerance!).

◆ Length()

template<typename Element_t>
static int NCollection_Vec3< Element_t >::Length ( void  )
inlinestatic

Returns the number of components.

◆ maxComp()

template<typename Element_t>
Element_t NCollection_Vec3< Element_t >::maxComp ( ) const
inline

Compute maximum component of the vector.

◆ minComp()

template<typename Element_t>
Element_t NCollection_Vec3< Element_t >::minComp ( ) const
inline

Compute minimum component of the vector.

◆ Modulus()

template<typename Element_t>
Element_t NCollection_Vec3< Element_t >::Modulus ( ) const
inline

Computes the vector modulus (magnitude, length).

◆ Multiplied()

template<typename Element_t>
NCollection_Vec3 NCollection_Vec3< Element_t >::Multiplied ( const Element_t  theFactor) const
inline

Compute per-component multiplication by scale factor.

◆ Multiply()

template<typename Element_t>
void NCollection_Vec3< Element_t >::Multiply ( const Element_t  theFactor)
inline

Compute per-component multiplication by scale factor.

◆ Normalize()

template<typename Element_t>
void NCollection_Vec3< Element_t >::Normalize ( )
inline

Normalize the vector.

◆ Normalized()

template<typename Element_t>
NCollection_Vec3 NCollection_Vec3< Element_t >::Normalized ( ) const
inline

Normalize the vector.

◆ operator const Element_t *()

template<typename Element_t>
NCollection_Vec3< Element_t >::operator const Element_t * ( ) const
inline

◆ operator Element_t *()

template<typename Element_t>
NCollection_Vec3< Element_t >::operator Element_t * ( )
inline

◆ operator!=() [1/2]

template<typename Element_t>
bool NCollection_Vec3< Element_t >::operator!= ( const NCollection_Vec3< Element_t > &  theOther)
inline

Check this vector with another vector for non-equality (without tolerance!).

◆ operator!=() [2/2]

template<typename Element_t>
bool NCollection_Vec3< Element_t >::operator!= ( const NCollection_Vec3< Element_t > &  theOther) const
inline

◆ operator*()

template<typename Element_t>
NCollection_Vec3 NCollection_Vec3< Element_t >::operator* ( const Element_t  theFactor) const
inline

Compute per-component multiplication by scale factor.

◆ operator*=() [1/2]

template<typename Element_t>
NCollection_Vec3& NCollection_Vec3< Element_t >::operator*= ( const NCollection_Vec3< Element_t > &  theRight)
inline

Compute per-component multiplication.

◆ operator*=() [2/2]

template<typename Element_t>
NCollection_Vec3& NCollection_Vec3< Element_t >::operator*= ( const Element_t  theFactor)
inline

Compute per-component multiplication by scale factor.

◆ operator+=()

template<typename Element_t>
NCollection_Vec3& NCollection_Vec3< Element_t >::operator+= ( const NCollection_Vec3< Element_t > &  theAdd)
inline

Compute per-component summary.

◆ operator-()

template<typename Element_t>
NCollection_Vec3 NCollection_Vec3< Element_t >::operator- ( ) const
inline

Unary -.

◆ operator-=()

template<typename Element_t>
NCollection_Vec3& NCollection_Vec3< Element_t >::operator-= ( const NCollection_Vec3< Element_t > &  theDec)
inline

Compute per-component subtraction.

◆ operator/()

template<typename Element_t>
NCollection_Vec3 NCollection_Vec3< Element_t >::operator/ ( const Element_t  theInvFactor) const
inline

Compute per-component division by scale factor.

◆ operator/=() [1/3]

template<typename Element_t>
NCollection_Vec3& NCollection_Vec3< Element_t >::operator/= ( const Element_t  theInvFactor)
inline

Compute per-component division by scale factor.

◆ operator/=() [2/3]

template<typename Element_t>
NCollection_Vec3& NCollection_Vec3< Element_t >::operator/= ( const NCollection_Vec3< Element_t > &  theRight)
inline

Compute per-component division.

◆ operator/=() [3/3]

template<>
NCollection_Vec3< double > & NCollection_Vec3< double >::operator/= ( const double  theInvFactor)
inline

Optimized concretization for double type.

◆ operator==() [1/2]

template<typename Element_t>
bool NCollection_Vec3< Element_t >::operator== ( const NCollection_Vec3< Element_t > &  theOther)
inline

Check this vector with another vector for equality (without tolerance!).

◆ operator==() [2/2]

template<typename Element_t>
bool NCollection_Vec3< Element_t >::operator== ( const NCollection_Vec3< Element_t > &  theOther) const
inline

◆ r() [1/2]

template<typename Element_t>
Element_t NCollection_Vec3< Element_t >::r ( ) const
inline

Alias to 1st component as RED channel in RGB.

◆ r() [2/2]

template<typename Element_t>
Element_t& NCollection_Vec3< Element_t >::r ( )
inline

Alias to 1st component as RED channel in RGB.

◆ SetValues() [1/2]

template<typename Element_t>
void NCollection_Vec3< Element_t >::SetValues ( const Element_t  theX,
const Element_t  theY,
const Element_t  theZ 
)
inline

Assign new values to the vector.

◆ SetValues() [2/2]

template<typename Element_t>
void NCollection_Vec3< Element_t >::SetValues ( const NCollection_Vec2< Element_t > &  theVec2,
Element_t  theZ 
)
inline

Assign new values to the vector.

◆ SquareModulus()

template<typename Element_t>
Element_t NCollection_Vec3< Element_t >::SquareModulus ( ) const
inline

Computes the square of vector modulus (magnitude, length). This method may be used for performance tricks.

◆ x() [1/2]

template<typename Element_t>
Element_t NCollection_Vec3< Element_t >::x ( ) const
inline

Alias to 1st component as X coordinate in XYZ.

◆ x() [2/2]

template<typename Element_t>
Element_t& NCollection_Vec3< Element_t >::x ( )
inline

Alias to 1st component as X coordinate in XYZ.

Returns
2 components by their names in specified order (in GLSL-style)
3 components by their names in specified order (in GLSL-style)

◆ y() [1/2]

template<typename Element_t>
Element_t NCollection_Vec3< Element_t >::y ( ) const
inline

Alias to 2nd component as Y coordinate in XYZ.

◆ y() [2/2]

template<typename Element_t>
Element_t& NCollection_Vec3< Element_t >::y ( )
inline

Alias to 2nd component as Y coordinate in XYZ.

◆ z() [1/2]

template<typename Element_t>
Element_t NCollection_Vec3< Element_t >::z ( ) const
inline

Alias to 3rd component as Z coordinate in XYZ.

◆ z() [2/2]

template<typename Element_t>
Element_t& NCollection_Vec3< Element_t >::z ( )
inline

Alias to 3rd component as Z coordinate in XYZ.

Friends And Related Function Documentation

◆ operator*

template<typename Element_t>
NCollection_Vec3 operator* ( const NCollection_Vec3< Element_t > &  theLeft,
const NCollection_Vec3< Element_t > &  theRight 
)
friend

Compute per-component multiplication.

◆ operator+

template<typename Element_t>
NCollection_Vec3 operator+ ( const NCollection_Vec3< Element_t > &  theLeft,
const NCollection_Vec3< Element_t > &  theRight 
)
friend

Compute per-component summary.

◆ operator-

template<typename Element_t>
NCollection_Vec3 operator- ( const NCollection_Vec3< Element_t > &  theLeft,
const NCollection_Vec3< Element_t > &  theRight 
)
friend

Compute per-component subtraction.

◆ operator/

template<typename Element_t>
NCollection_Vec3 operator/ ( const NCollection_Vec3< Element_t > &  theLeft,
const NCollection_Vec3< Element_t > &  theRight 
)
friend

Compute per-component division.


The documentation for this class was generated from the following file: