Open CASCADE Technology  7.5.0
Public Member Functions | Protected Member Functions
PrsDim_LengthDimension Class Reference

Length dimension. Can be constructued: More...

#include <PrsDim_LengthDimension.hxx>

Inheritance diagram for PrsDim_LengthDimension:
Inheritance graph
[legend]

Public Member Functions

 PrsDim_LengthDimension (const TopoDS_Face &theFace, const TopoDS_Edge &theEdge)
 Construct length dimension between face and edge. Here dimension can be built without user-defined plane. More...
 
 PrsDim_LengthDimension (const TopoDS_Face &theFirstFace, const TopoDS_Face &theSecondFace)
 Construct length dimension between two faces. More...
 
 PrsDim_LengthDimension (const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint, const gp_Pln &thePlane)
 Construct length dimension between two points in the specified plane. More...
 
 PrsDim_LengthDimension (const TopoDS_Shape &theFirstShape, const TopoDS_Shape &theSecondShape, const gp_Pln &thePlane)
 Construct length dimension between two arbitrary shapes in the specified plane. More...
 
 PrsDim_LengthDimension (const TopoDS_Edge &theEdge, const gp_Pln &thePlane)
 Construct length dimension of linear edge. More...
 
const gp_PntFirstPoint () const
 
const gp_PntSecondPoint () const
 
const TopoDS_ShapeFirstShape () const
 
const TopoDS_ShapeSecondShape () const
 
void SetMeasuredGeometry (const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint, const gp_Pln &thePlane)
 Measure distance between two points. The dimension will become invalid if the new distance between attachement points is less than Precision::Confusion(). More...
 
void SetMeasuredGeometry (const TopoDS_Edge &theEdge, const gp_Pln &thePlane)
 Measure length of edge. The dimension will become invalid if the new length of edge is less than Precision::Confusion(). More...
 
void SetMeasuredGeometry (const TopoDS_Face &theFirstFace, const TopoDS_Face &theSecondFace)
 Measure distance between two faces. The dimension will become invalid if the distance can not be measured or it is less than Precision::Confusion(). More...
 
void SetMeasuredGeometry (const TopoDS_Face &theFace, const TopoDS_Edge &theEdge)
 Measure distance between face and edge. The dimension will become invalid if the distance can not be measured or it is less than Precision::Confusion(). More...
 
void SetMeasuredShapes (const TopoDS_Shape &theFirstShape, const TopoDS_Shape &theSecondShape)
 Measure distance between generic pair of shapes (edges, vertices, length), where measuring is applicable. More...
 
virtual const TCollection_AsciiStringGetDisplayUnits () const override
 
virtual const TCollection_AsciiStringGetModelUnits () const override
 
virtual void SetDisplayUnits (const TCollection_AsciiString &theUnits) override
 
virtual void SetModelUnits (const TCollection_AsciiString &theUnits) override
 
virtual void SetTextPosition (const gp_Pnt &theTextPos) override
 Fixes the absolute text position and adjusts flyout, plane and text alignment according to it. Updates presentation if the text position is valid. ATTENTION! It does not change vertical text alignment. More...
 
virtual gp_Pnt GetTextPosition () const override
 Computes absolute text position from dimension parameters (flyout, plane and text alignment). More...
 
void SetDirection (const gp_Dir &theDirection, const Standard_Boolean theUseDirection=Standard_True)
 Set custom direction for dimension. If it is not set, the direction is obtained from the measured geometry (e.g. line between points of dimension) The direction does not change flyout direction of dimension. More...
 
- Public Member Functions inherited from PrsDim_Dimension
 PrsDim_Dimension (const PrsDim_KindOfDimension theType)
 Constructor with default parameters values. More...
 
Standard_Real GetValue () const
 Gets dimension measurement value. If the value to display is not specified by user, then the dimension object is responsible to compute it on its own in model space coordinates. More...
 
void SetComputedValue ()
 Sets computed dimension value. Resets custom value mode if it was set. More...
 
void SetCustomValue (const Standard_Real theValue)
 Sets user-defined dimension value. The user-defined dimension value is specified in model space, and affect by unit conversion during the display. More...
 
void SetCustomValue (const TCollection_ExtendedString &theValue)
 Sets user-defined dimension value. Unit conversion during the display is not applyed. More...
 
const TCollection_ExtendedStringGetCustomValue () const
 Gets user-defined dimension value. More...
 
const gp_PlnGetPlane () const
 Get the dimension plane in which the 2D dimension presentation is computed. By default, if plane is not defined by user, it is computed automatically after dimension geometry is computed. If computed dimension geometry (points) can't be placed on the user-defined plane, dimension geometry was set as invalid (validity flag is set to false) and dimension presentation will not be computed. If user-defined plane allow geometry placement on it, it will be used for computing of the dimension presentation. More...
 
Standard_Integer GetGeometryType () const
 Geometry type defines type of shapes on which the dimension is to be built. More...
 
virtual void SetCustomPlane (const gp_Pln &thePlane)
 Sets user-defined plane where the 2D dimension presentation will be placed. Checks validity of this plane if geometry has been set already. Validity of the plane is checked according to the geometry set and has different criteria for different kinds of dimensions. More...
 
void UnsetCustomPlane ()
 Unsets user-defined plane. Therefore the plane for dimension will be computed automatically. More...
 
Standard_Boolean IsTextPositionCustom () const
 
Handle< Prs3d_DimensionAspectDimensionAspect () const
 Gets the dimension aspect from AIS object drawer. Dimension aspect contains aspects of line, text and arrows for dimension presentation. More...
 
void SetDimensionAspect (const Handle< Prs3d_DimensionAspect > &theDimensionAspect)
 Sets new dimension aspect for the interactive object drawer. The dimension aspect provides dynamic properties which are generally used during computation of dimension presentations. More...
 
PrsDim_KindOfDimension KindOfDimension () const
 
virtual AIS_KindOfInteractive Type () const override
 
virtual Standard_Boolean AcceptDisplayMode (const Standard_Integer theMode) const override
 Returns true if the class of objects accepts the display mode theMode. The interactive context can have a default mode of representation for the set of Interactive Objects. This mode may not be accepted by object. More...
 
PrsDim_DisplaySpecialSymbol DisplaySpecialSymbol () const
 
void SetDisplaySpecialSymbol (const PrsDim_DisplaySpecialSymbol theDisplaySpecSymbol)
 Specifies whether to display special symbol or not. More...
 
Standard_ExtCharacter SpecialSymbol () const
 
void SetSpecialSymbol (const Standard_ExtCharacter theSpecialSymbol)
 Specifies special symbol. More...
 
void UnsetFixedTextPosition ()
 Unsets user defined text positioning and enables text positioning by other parameters: text alignment, extension size, flyout and custom plane. More...
 
Standard_Real SelToleranceForText2d () const
 Returns selection tolerance for text2d: For 2d text selection detection sensitive point with tolerance is used Important! Only for 2d text. More...
 
void SetSelToleranceForText2d (const Standard_Real theTol)
 Sets selection tolerance for text2d: For 2d text selection detection sensitive point with tolerance is used to change this tolerance use this method Important! Only for 2d text. More...
 
Standard_Real GetFlyout () const
 
void SetFlyout (const Standard_Real theFlyout)
 Sets flyout value for dimension. More...
 
virtual Standard_Boolean IsValid () const
 Check that the input geometry for dimension is valid and the presentation can be successfully computed. More...
 
- Public Member Functions inherited from AIS_InteractiveObject
virtual Standard_Integer Signature () const
 Specifies additional characteristics of Interactive Object of Type(); -1 by default. Among the datums, this signature is attributed to the shape. The remaining datums have the following default signatures: More...
 
void Redisplay (const Standard_Boolean AllModes=Standard_False)
 Updates the active presentation; if <AllModes> = Standard_True all the presentations inside are recomputed. IMPORTANT: It is preferable to call Redisplay method of corresponding AIS_InteractiveContext instance for cases when it is accessible. This method just redirects call to myCTXPtr, so this class field must be up to date for proper result. More...
 
Standard_Boolean HasInteractiveContext () const
 Indicates whether the Interactive Object has a pointer to an interactive context. More...
 
AIS_InteractiveContextInteractiveContext () const
 Returns the context pointer to the interactive context. More...
 
virtual void SetContext (const Handle< AIS_InteractiveContext > &aCtx)
 Sets the interactive context aCtx and provides a link to the default drawing tool or "Drawer" if there is none. More...
 
Standard_Boolean HasOwner () const
 Returns true if the object has an owner attributed to it. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. More...
 
const Handle< Standard_Transient > & GetOwner () const
 Returns the owner of the Interactive Object. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. There are two types of owners: More...
 
void SetOwner (const Handle< Standard_Transient > &theApplicativeEntity)
 Allows you to attribute the owner theApplicativeEntity to an Interactive Object. This can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of. The owner takes the form of a transient. More...
 
void ClearOwner ()
 Each Interactive Object has methods which allow us to attribute an Owner to it in the form of a Transient. This method removes the owner from the graphic entity. More...
 
virtual Standard_Boolean ProcessDragging (const Handle< AIS_InteractiveContext > &theCtx, const Handle< V3d_View > &theView, const Handle< SelectMgr_EntityOwner > &theOwner, const Graphic3d_Vec2i &theDragFrom, const Graphic3d_Vec2i &theDragTo, const AIS_DragAction theAction)
 Drag object in the viewer. More...
 
Handle< AIS_InteractiveContextGetContext () const
 Returns the context pointer to the interactive context. More...
 
Standard_Boolean HasPresentation () const
 Returns TRUE when this object has a presentation in the current DisplayMode() More...
 
Handle< Prs3d_PresentationPresentation () const
 Returns the current presentation of this object according to the current DisplayMode() More...
 
void SetAspect (const Handle< Prs3d_BasicAspect > &anAspect)
 Sets the graphic basic aspect to the current presentation. More...
 
virtual void DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const override
 Dumps the content of me into the stream. More...
 
- Public Member Functions inherited from SelectMgr_SelectableObject
virtual ~SelectMgr_SelectableObject ()
 Clears all selections of the object. More...
 
virtual Standard_Boolean AcceptShapeDecomposition () const
 Informs the graphic context that the interactive Object may be decomposed into sub-shapes for dynamic selection. The most used Interactive Object is AIS_Shape. More...
 
void RecomputePrimitives ()
 Re-computes the sensitive primitives for all modes. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection. More...
 
void RecomputePrimitives (const Standard_Integer theMode)
 Re-computes the sensitive primitives which correspond to the <theMode>th selection mode. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection. More...
 
void AddSelection (const Handle< SelectMgr_Selection > &aSelection, const Standard_Integer aMode)
 Adds the selection aSelection with the selection mode index aMode to this framework. More...
 
void ClearSelections (const Standard_Boolean update=Standard_False)
 Empties all the selections in the SelectableObject <update> parameter defines whether all object's selections should be flagged for further update or not. This improved method can be used to recompute an object's selection (without redisplaying the object completely) when some selection mode is activated not for the first time. More...
 
const Handle< SelectMgr_Selection > & Selection (const Standard_Integer theMode) const
 Returns the selection having specified selection mode or NULL. More...
 
Standard_Boolean HasSelection (const Standard_Integer theMode) const
 Returns true if a selection corresponding to the selection mode theMode was computed for this object. More...
 
const SelectMgr_SequenceOfSelectionSelections () const
 Return the sequence of selections. More...
 
void ResetTransformation () override
 resets local transformation to identity. More...
 
virtual void UpdateTransformation () override
 Recomputes the location of the selection aSelection. More...
 
virtual void UpdateTransformations (const Handle< SelectMgr_Selection > &aSelection)
 Updates locations in all sensitive entities from <aSelection> and in corresponding entity owners. More...
 
virtual void HilightSelected (const Handle< PrsMgr_PresentationManager > &thePrsMgr, const SelectMgr_SequenceOfOwner &theSeq)
 Method which draws selected owners ( for fast presentation draw ) More...
 
virtual void ClearSelected ()
 Method which clear all selected owners belonging to this selectable object ( for fast presentation draw ) More...
 
virtual void ClearDynamicHighlight (const Handle< PrsMgr_PresentationManager > &theMgr)
 Method that needs to be implemented when the object manages selection and dynamic highlighting on its own. Clears or invalidates dynamic highlight presentation. By default it clears immediate draw of given presentation manager. More...
 
virtual void HilightOwnerWithColor (const Handle< PrsMgr_PresentationManager > &thePM, const Handle< Prs3d_Drawer > &theStyle, const Handle< SelectMgr_EntityOwner > &theOwner)
 Method which hilight an owner belonging to this selectable object ( for fast presentation draw ) More...
 
virtual Standard_Boolean IsAutoHilight () const
 If returns True, the old mechanism for highlighting selected objects is used (HilightSelected Method may be empty). If returns False, the HilightSelected method will be fully responsible for highlighting selected entity owners belonging to this selectable object. More...
 
virtual void SetAutoHilight (const Standard_Boolean theAutoHilight)
 Set AutoHilight property to true or false. More...
 
Handle< Prs3d_PresentationGetHilightPresentation (const Handle< PrsMgr_PresentationManager > &thePrsMgr)
 Creates or returns existing presentation for highlighting detected object. More...
 
Handle< Prs3d_PresentationGetSelectPresentation (const Handle< PrsMgr_PresentationManager > &thePrsMgr)
 Creates or returns existing presentation for highlighting selected object. More...
 
virtual void ErasePresentations (Standard_Boolean theToRemove)
 Removes presentations returned by GetHilightPresentation() and GetSelectPresentation(). More...
 
virtual void SetZLayer (const Graphic3d_ZLayerId theLayerId) override
 Set Z layer ID and update all presentations of the selectable object. The layers mechanism allows drawing objects in higher layers in overlay of objects in lower layers. More...
 
void UpdateSelection (const Standard_Integer theMode=-1)
 Sets update status FULL to selections of the object. Must be used as the only method of UpdateSelection from outer classes to prevent BVH structures from being outdated. More...
 
void SetAssemblyOwner (const Handle< SelectMgr_EntityOwner > &theOwner, const Standard_Integer theMode=-1)
 Sets common entity owner for assembly sensitive object entities. More...
 
Bnd_Box BndBoxOfSelected (const Handle< SelectMgr_IndexedMapOfOwner > &theOwners)
 Returns a bounding box of sensitive entities with the owners given if they are a part of activated selection. More...
 
Standard_Integer GlobalSelectionMode () const
 Returns the mode for selection of object as a whole; 0 by default. More...
 
virtual Handle< SelectMgr_EntityOwnerGlobalSelOwner () const
 Returns the owner of mode for selection of object as a whole. More...
 
virtual const Handle< SelectMgr_EntityOwner > & GetAssemblyOwner () const
 Returns common entity owner if the object is an assembly. More...
 
- Public Member Functions inherited from PrsMgr_PresentableObject
PrsMgr_PresentationsPresentations ()
 Return presentations. More...
 
Graphic3d_ZLayerId ZLayer () const
 Get ID of Z layer for main presentation. More...
 
Standard_Boolean IsMutable () const
 Returns true if object has mutable nature (content or location are be changed regularly). Mutable object will be managed in different way than static onces (another optimizations). More...
 
virtual void SetMutable (const Standard_Boolean theIsMutable)
 Sets if the object has mutable nature (content or location will be changed regularly). This method should be called before object displaying to take effect. More...
 
Standard_Boolean HasDisplayMode () const
 Returns true if the Interactive Object has display mode setting overriding global setting (within Interactive Context). More...
 
Standard_Integer DisplayMode () const
 Returns the display mode setting of the Interactive Object. The range of supported display mode indexes should be specified within object definition and filtered by AccepDisplayMode(). More...
 
void SetDisplayMode (const Standard_Integer theMode)
 Sets the display mode for the interactive object. An object can have its own temporary display mode, which is different from that proposed by the interactive context. More...
 
void UnsetDisplayMode ()
 Removes display mode settings from the interactive object. More...
 
Standard_Boolean HasHilightMode () const
 Returns true if the Interactive Object is in highlight mode. More...
 
Standard_Integer HilightMode () const
 Returns highlight display mode. This is obsolete method for backward compatibility - use ::HilightAttributes() and ::DynamicHilightAttributes() instead. More...
 
void SetHilightMode (const Standard_Integer theMode)
 Sets highlight display mode. This is obsolete method for backward compatibility - use ::HilightAttributes() and ::DynamicHilightAttributes() instead. More...
 
void UnsetHilightMode ()
 Unsets highlight display mode. More...
 
virtual Standard_Integer DefaultDisplayMode () const
 Returns the default display mode. More...
 
Standard_Boolean ToBeUpdated (Standard_Boolean theToIncludeHidden=Standard_False) const
 Returns TRUE if any active presentation has invalidation flag. More...
 
void SetToUpdate (Standard_Integer theMode)
 Flags presentation to be updated; UpdatePresentations() will recompute these presentations. More...
 
void SetToUpdate ()
 flags all the Presentations to be Updated. More...
 
Standard_Boolean IsInfinite () const
 Returns true if the interactive object is infinite; FALSE by default. This flag affects various operations operating on bounding box of graphic presentations of this object. For instance, infinite objects are not taken in account for View FitAll. This does not necessarily means that object is actually infinite, auxiliary objects might be also marked with this flag to achieve desired behavior. More...
 
void SetInfiniteState (const Standard_Boolean theFlag=Standard_True)
 Sets if object should be considered as infinite. More...
 
PrsMgr_TypeOfPresentation3d TypeOfPresentation3d () const
 Returns information on whether the object accepts display in HLR mode or not. More...
 
void SetTypeOfPresentation (const PrsMgr_TypeOfPresentation3d theType)
 Set type of presentation. More...
 
const Handle< Prs3d_Drawer > & Attributes () const
 Returns the attributes settings. More...
 
virtual void SetAttributes (const Handle< Prs3d_Drawer > &theDrawer)
 Initializes the drawing tool theDrawer. More...
 
const Handle< Prs3d_Drawer > & HilightAttributes () const
 Returns the hilight attributes settings. When not NULL, overrides both Prs3d_TypeOfHighlight_LocalSelected and Prs3d_TypeOfHighlight_Selected defined within AIS_InteractiveContext. More...
 
virtual void SetHilightAttributes (const Handle< Prs3d_Drawer > &theDrawer)
 Initializes the hilight drawing tool theDrawer. More...
 
const Handle< Prs3d_Drawer > & DynamicHilightAttributes () const
 Returns the hilight attributes settings. When not NULL, overrides both Prs3d_TypeOfHighlight_LocalDynamic and Prs3d_TypeOfHighlight_Dynamic defined within AIS_InteractiveContext. More...
 
virtual void SetDynamicHilightAttributes (const Handle< Prs3d_Drawer > &theDrawer)
 Initializes the dynamic hilight drawing tool. More...
 
virtual void UnsetHilightAttributes ()
 Clears settings provided by the hilight drawing tool theDrawer. More...
 
void SynchronizeAspects ()
 Synchronize presentation aspects after their modification. More...
 
const Handle< Graphic3d_TransformPers > & TransformPersistence () const
 Returns Transformation Persistence defining a special Local Coordinate system where this presentable object is located or NULL handle if not defined. Position of the object having Transformation Persistence is mutable and depends on camera position. The same applies to a bounding box of the object. More...
 
virtual void SetTransformPersistence (const Handle< Graphic3d_TransformPers > &theTrsfPers)
 Sets up Transform Persistence defining a special Local Coordinate system where this object should be located. Note that management of Transform Persistence object is more expensive than of the normal one, because it requires its position being recomputed basing on camera position within each draw call / traverse. More...
 
const Handle< TopLoc_Datum3D > & LocalTransformationGeom () const
 Return the local transformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...
 
void SetLocalTransformation (const gp_Trsf &theTrsf)
 Sets local transformation to theTransformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...
 
void SetLocalTransformation (const Handle< TopLoc_Datum3D > &theTrsf)
 Sets local transformation to theTransformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...
 
Standard_Boolean HasTransformation () const
 Returns true if object has a transformation that is different from the identity. More...
 
const Handle< TopLoc_Datum3D > & TransformationGeom () const
 Return the transformation taking into account transformation of parent object(s). Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...
 
const gp_TrsfLocalTransformation () const
 Return the local transformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...
 
const gp_TrsfTransformation () const
 Return the transformation taking into account transformation of parent object(s). Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...
 
const gp_GTrsfInversedTransformation () const
 Return inversed transformation. More...
 
const Handle< TopLoc_Datum3D > & CombinedParentTransformation () const
 Return combined parent transformation. More...
 
const Handle< Graphic3d_SequenceOfHClipPlane > & ClipPlanes () const
 Get clip planes. More...
 
virtual void SetClipPlanes (const Handle< Graphic3d_SequenceOfHClipPlane > &thePlanes)
 Set clip planes for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be subtracted from limit to predict the maximum possible number of object clipping planes. More...
 
virtual void AddClipPlane (const Handle< Graphic3d_ClipPlane > &thePlane)
 Adds clip plane for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be subtracted from limit to predict the maximum possible number of object clipping planes. More...
 
virtual void RemoveClipPlane (const Handle< Graphic3d_ClipPlane > &thePlane)
 Removes previously added clip plane. More...
 
PrsMgr_PresentableObjectParent () const
 Returns parent of current object in scene hierarchy. More...
 
const PrsMgr_ListOfPresentableObjectsChildren () const
 Returns children of the current object. More...
 
virtual void AddChild (const Handle< PrsMgr_PresentableObject > &theObject)
 Makes theObject child of current object in scene hierarchy. More...
 
void AddChildWithCurrentTransformation (const Handle< PrsMgr_PresentableObject > &theObject)
 Makes theObject child of current object in scene hierarchy with keeping the current global transformation So the object keeps the same position/orientation in the global CS. More...
 
virtual void RemoveChild (const Handle< PrsMgr_PresentableObject > &theObject)
 Removes theObject from children of current object in scene hierarchy. More...
 
void RemoveChildWithRestoreTransformation (const Handle< PrsMgr_PresentableObject > &theObject)
 Removes theObject from children of current object in scene hierarchy with keeping the current global transformation. So the object keeps the same position/orientation in the global CS. More...
 
Standard_Boolean HasOwnPresentations () const
 Returns true if object should have own presentations. More...
 
virtual void BoundingBox (Bnd_Box &theBndBox)
 Returns bounding box of object correspondingly to its current display mode. This method requires presentation to be already computed, since it relies on bounding box of presentation structures, which are supposed to be same/close amongst different display modes of this object. More...
 
void SetIsoOnTriangulation (const Standard_Boolean theIsEnabled)
 Enables or disables on-triangulation build of isolines according to the flag given. More...
 
Aspect_TypeOfFacingModel CurrentFacingModel () const
 Returns the current facing model which is in effect. More...
 
void SetCurrentFacingModel (const Aspect_TypeOfFacingModel theModel=Aspect_TOFM_BOTH_SIDE)
 change the current facing model apply on polygons for SetColor(), SetTransparency(), SetMaterial() methods default facing model is Aspect_TOFM_TWO_SIDE. This mean that attributes is applying both on the front and back face. More...
 
Standard_Boolean HasColor () const
 Returns true if the Interactive Object has color. More...
 
virtual void Color (Quantity_Color &theColor) const
 Returns the color setting of the Interactive Object. More...
 
virtual void SetColor (const Quantity_Color &theColor)
 Only the interactive object knowns which Drawer attribute is affected by the color, if any (ex: for a wire,it's the wireaspect field of the drawer, but for a vertex, only the point aspect field is affected by the color). WARNING : Do not forget to set the corresponding fields here (hasOwnColor and myDrawer->SetColor()) More...
 
virtual void UnsetColor ()
 Removes color settings. Only the Interactive Object knows which Drawer attribute is affected by the color setting. For a wire, for example, wire aspect is the attribute affected. For a vertex, however, only point aspect is affected by the color setting. More...
 
Standard_Boolean HasWidth () const
 Returns true if the Interactive Object has width. More...
 
Standard_Real Width () const
 Returns the width setting of the Interactive Object. More...
 
virtual void SetWidth (const Standard_Real theWidth)
 Allows you to provide the setting aValue for width. Only the Interactive Object knows which Drawer attribute is affected by the width setting. More...
 
virtual void UnsetWidth ()
 Reset width to default value. More...
 
Standard_Boolean HasMaterial () const
 Returns true if the Interactive Object has a setting for material. More...
 
virtual Graphic3d_NameOfMaterial Material () const
 Returns the current material setting as enumeration value. More...
 
virtual void SetMaterial (const Graphic3d_MaterialAspect &aName)
 Sets the material aMat defining this display attribute for the interactive object. Material aspect determines shading aspect, color and transparency of visible entities. More...
 
virtual void UnsetMaterial ()
 Removes the setting for material. More...
 
Standard_Boolean IsTransparent () const
 Returns true if there is a transparency setting. More...
 
virtual Standard_Real Transparency () const
 Returns the transparency setting. This will be between 0.0 and 1.0. At 0.0 an object will be totally opaque, and at 1.0, fully transparent. More...
 
virtual void SetTransparency (const Standard_Real aValue=0.6)
 Attributes a setting aValue for transparency. The transparency value should be between 0.0 and 1.0. At 0.0 an object will be totally opaque, and at 1.0, fully transparent. Warning At a value of 1.0, there may be nothing visible. More...
 
virtual void UnsetTransparency ()
 Removes the transparency setting. The object is opaque by default. More...
 
virtual Standard_Boolean HasPolygonOffsets () const
 Returns Standard_True if <myDrawer> has non-null shading aspect. More...
 
virtual void PolygonOffsets (Standard_Integer &aMode, Standard_ShortReal &aFactor, Standard_ShortReal &aUnits) const
 Retrieves current polygon offsets settings from <myDrawer>. More...
 
virtual void SetPolygonOffsets (const Standard_Integer aMode, const Standard_ShortReal aFactor=1.0, const Standard_ShortReal aUnits=0.0)
 Sets up polygon offsets for this object. More...
 
virtual void UnsetAttributes ()
 Clears settings provided by the drawing tool aDrawer. More...
 
void ToBeUpdated (TColStd_ListOfInteger &ListOfMode) const
 gives the list of modes which are flagged "to be updated". More...
 
void SetClipPlanes (const Graphic3d_SequenceOfHClipPlane &thePlanes)
 
void SetTransformPersistence (const Graphic3d_TransModeFlags theMode, const gp_Pnt &thePoint=gp_Pnt(0.0, 0.0, 0.0))
 Sets up Transform Persistence Mode for this object. This function used to lock in object position, rotation and / or zooming relative to camera position. Object will be drawn in the origin setted by thePoint parameter (except Graphic3d_TMF_TriedronPers flag. More...
 
Graphic3d_TransModeFlags GetTransformPersistenceMode () const
 Gets Transform Persistence Mode for this object. More...
 
gp_Pnt GetTransformPersistencePoint () const
 Gets point of transform persistence for this object. More...
 
Standard_Boolean ToPropagateVisualState () const
 Get value of the flag "propagate visual state" It means that the display/erase/color visual state is propagated automatically to all children; by default, the flag is true. More...
 
void SetPropagateVisualState (const Standard_Boolean theFlag)
 Change the value of the flag "propagate visual state". More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Protected Member Functions

virtual Standard_Boolean CheckPlane (const gp_Pln &thePlane) const override
 Checks if the plane includes first and second points to build dimension. More...
 
virtual gp_Pln ComputePlane (const gp_Dir &theAttachDir) const
 
Standard_Real ComputeValue () const override
 Computes distance between dimension points. If custom direction is defined, the distance is a projection value of the distance between points to this direction. More...
 
virtual void Compute (const Handle< PrsMgr_PresentationManager3d > &thePresentationManager, const Handle< Prs3d_Presentation > &thePresentation, const Standard_Integer theMode=0) override
 Calculates the 3D view presentation for specified display mode. This is a key interface for implementing Presentable Object interface. More...
 
virtual void ComputeFlyoutLinePoints (const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint, gp_Pnt &theLineBegPoint, gp_Pnt &theLineEndPoint) override
 Computes points bounded the flyout line for linear dimension. Direction of flyout line equal to the custom direction of dimension if defined or parallel to the main direction line. More...
 
virtual void ComputeFlyoutSelection (const Handle< SelectMgr_Selection > &theSelection, const Handle< SelectMgr_EntityOwner > &theEntityOwner) override
 Override this method to compute selection primitives for flyout lines (if the dimension provides it). This callback is a only a part of base selection computation routine. More...
 
Standard_Boolean IsValidPoints (const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint) const
 Checks that distance between two points is valid. More...
 
Standard_Boolean InitTwoEdgesLength (const TopoDS_Edge &theFirstEdge, const TopoDS_Edge &theSecondEdge, gp_Dir &theEdgeDir)
 
Standard_Boolean InitEdgeVertexLength (const TopoDS_Edge &theEdge, const TopoDS_Vertex &theVertex, gp_Dir &theEdgeDir, Standard_Boolean isInfinite)
 Auxiliary method for InitTwoShapesPoints() in case of the distance between edge and vertex. Finds the point on the edge that is the closest one to <theVertex>. More...
 
Standard_Boolean InitEdgeFaceLength (const TopoDS_Edge &theEdge, const TopoDS_Face &theFace, gp_Dir &theEdgeDir)
 Auxiliary method for InitTwoShapesPoints() in case of the distance between face and edge. The first attachment point is first parameter point from <theEdge>. Find the second attachment point which belongs to <theFace> Iterate over the edges of the face and find the closest point according to finded point on edge. More...
 
Standard_Boolean InitTwoShapesPoints (const TopoDS_Shape &theFirstShape, const TopoDS_Shape &theSecondShape, gp_Pln &theComputedPlane, Standard_Boolean &theIsPlaneComputed)
 Initialization of two attach points in case of two owner shapes. More...
 
Standard_Boolean InitOneShapePoints (const TopoDS_Shape &theShape)
 Initialization of two attach points in case of one owner shape. More...
 
- Protected Member Functions inherited from PrsDim_Dimension
Standard_Real ValueToDisplayUnits () const
 
TCollection_ExtendedString GetValueString (Standard_Real &theWidth) const
 Get formatted value string and its model space width. More...
 
void DrawArrow (const Handle< Prs3d_Presentation > &thePresentation, const gp_Pnt &theLocation, const gp_Dir &theDirection)
 Performs drawing of 2d or 3d arrows on the working plane. More...
 
void drawText (const Handle< Prs3d_Presentation > &thePresentation, const gp_Pnt &theTextPos, const gp_Dir &theTextDir, const TCollection_ExtendedString &theText, const Standard_Integer theLabelPosition)
 Performs drawing of 2d or 3d text on the working plane. More...
 
void DrawExtension (const Handle< Prs3d_Presentation > &thePresentation, const Standard_Real theExtensionSize, const gp_Pnt &theExtensionStart, const gp_Dir &theExtensionDir, const TCollection_ExtendedString &theLabelString, const Standard_Real theLabelWidth, const Standard_Integer theMode, const Standard_Integer theLabelPosition)
 Performs computing of dimension linear extension with text. More...
 
void DrawLinearDimension (const Handle< Prs3d_Presentation > &thePresentation, const Standard_Integer theMode, const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint, const Standard_Boolean theIsOneSide=Standard_False)
 Performs computing of linear dimension (for length, diameter, radius and so on). Please note that this method uses base dimension properties, like working plane flyout length, drawer attributes. More...
 
void ComputeLinearFlyouts (const Handle< SelectMgr_Selection > &theSelection, const Handle< SelectMgr_EntityOwner > &theOwner, const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint)
 Compute selection sensitives for linear dimension flyout lines (length, diameter, radius). Please note that this method uses base dimension properties: working plane and flyout length. More...
 
Standard_Boolean InitCircularDimension (const TopoDS_Shape &theShape, gp_Circ &theCircle, gp_Pnt &theMiddleArcPoint, Standard_Boolean &theIsClosed)
 Performs initialization of circle and middle arc point from the passed shape which is assumed to contain circular geometry. More...
 
void PointsForArrow (const gp_Pnt &thePeakPnt, const gp_Dir &theDirection, const gp_Dir &thePlane, const Standard_Real theArrowLength, const Standard_Real theArrowAngle, gp_Pnt &theSidePnt1, gp_Pnt &theSidePnt2)
 Produce points for triangular arrow face. More...
 
gp_Pnt GetTextPositionForLinear (const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint, const Standard_Boolean theIsOneSide=Standard_False) const
 Compute point of text position for dimension parameters for linear kinds of dimensions (length, radius, diameter). More...
 
void FitTextAlignmentForLinear (const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint, const Standard_Boolean theIsOneSide, const Prs3d_DimensionTextHorizontalPosition &theHorizontalTextPos, Standard_Integer &theLabelPosition, Standard_Boolean &theIsArrowsExternal) const
 Fits text alignment relatively to the dimension line. More...
 
Standard_Boolean AdjustParametersForLinear (const gp_Pnt &theTextPos, const gp_Pnt &theFirstPoint, const gp_Pnt &theSecondPoint, Standard_Real &theExtensionSize, Prs3d_DimensionTextHorizontalPosition &theAlignment, Standard_Real &theFlyout, gp_Pln &thePlane, Standard_Boolean &theIsPlaneOld) const
 Adjusts aspect parameters according the text position: extension size, vertical text alignment and flyout. More...
 
virtual void ComputeSelection (const Handle< SelectMgr_Selection > &theSelection, const Standard_Integer theMode) override
 Base procedure of computing selection (based on selection geometry data). More...
 
- Protected Member Functions inherited from AIS_InteractiveObject
 AIS_InteractiveObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)
 The TypeOfPresention3d means that the interactive object may have a presentation dependant of the view of Display. More...
 
- Protected Member Functions inherited from SelectMgr_SelectableObject
 SelectMgr_SelectableObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)
 Protected empty constructor. More...
 
void setGlobalSelMode (const Standard_Integer theMode)
 Override global selection mode. More...
 
virtual void UpdateClipping () override
 Update clipping planes state. More...
 
virtual void updateSelection (const Standard_Integer theMode)
 Sets update status FULL to selections of the object. Must be used as the only method of UpdateSelection from outer classes to prevent BVH structures from being outdated. More...
 
- Protected Member Functions inherited from PrsMgr_PresentableObject
void Update (Standard_Boolean theToIncludeHidden=Standard_False)
 Recomputes all presentations of the object. More...
 
void Update (Standard_Integer theMode, Standard_Boolean theToClearOther)
 Recomputes the presentation in the given mode. More...
 
 PrsMgr_PresentableObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)
 Protected empty constructor. More...
 
virtual ~PrsMgr_PresentableObject ()
 Destructor. More...
 
virtual void Fill (const Handle< PrsMgr_PresentationManager > &thePrsMgr, const Handle< PrsMgr_Presentation > &thePrs, const Standard_Integer theMode)
 Fills the given 3D view presentation for specified display mode using Compute() method. In addition, configures other properties of presentation (transformation, clipping planes). More...
 
virtual void computeHLR (const Handle< Graphic3d_Camera > &theProjector, const Handle< TopLoc_Datum3D > &theTrsf, const Handle< Prs3d_Presentation > &thePrs)
 Calculates hidden line removal presentation for specific camera position. Each of the views in the viewer and every modification such as rotation, for example, entails recalculation. Default implementation throws Standard_NotImplemented exception Warning! The transformation must be applied to the object before computation. More...
 
Standard_Boolean UpdatePresentations (Standard_Boolean theToIncludeHidden=Standard_False)
 Recomputes invalidated presentations of the object. More...
 
virtual void SetCombinedParentTransform (const Handle< TopLoc_Datum3D > &theTrsf)
 Sets myCombinedParentTransform to theTransformation. Thus object receives transformation from parent node and able to derive its own. More...
 
virtual void setLocalTransformation (const Handle< TopLoc_Datum3D > &theTransformation)
 Sets local transformation to theTransformation. More...
 
void recomputeComputed () const
 Recompute computed (HLR) presentations (when view is in computed mode). More...
 
void replaceAspects (const Graphic3d_MapOfAspectsToAspects &theMap)
 Replace aspects of existing (computed) presentation groups, so that the new aspects can be applied without recomputing presentation. It is NOT recommended approach, because user has to fill such map and then search for each occurrence in computed groups. The recommended approach is computing presentation with necessary customized aspects, and then modify them directly followed by SynchronizeAspects() call. More...
 

Additional Inherited Members

- Public Types inherited from PrsDim_Dimension
enum  ComputeMode { ComputeMode_All = 0, ComputeMode_Line = 1, ComputeMode_Text = 2 }
 Specifies supported presentation compute modes. Used to compute only parts of presentation for advanced highlighting. More...
 
- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 
- Protected Types inherited from PrsDim_Dimension
enum  GeometryType {
  GeometryType_UndefShapes, GeometryType_Edge, GeometryType_Face, GeometryType_Points,
  GeometryType_Edges, GeometryType_Faces, GeometryType_EdgeFace, GeometryType_EdgeVertex
}
 Geometry type defines type of shapes on which the dimension is to be built. Some type of geometry allows automatic plane computing and can be built without user-defined plane Another types can't be built without user-defined plane. More...
 
enum  LabelPosition {
  LabelPosition_None = 0x00, LabelPosition_Left = 0x01, LabelPosition_Right = 0x02, LabelPosition_HCenter = 0x04,
  LabelPosition_HMask = LabelPosition_Left | LabelPosition_Right | LabelPosition_HCenter, LabelPosition_Above = 0x10, LabelPosition_Below = 0x20, LabelPosition_VCenter = 0x40,
  LabelPosition_VMask = LabelPosition_Above | LabelPosition_Below | LabelPosition_VCenter
}
 Specifies supported at base level horizontal and vertical label positions for drawing extension lines and centered text. More...
 
enum  ValueType { ValueType_Computed, ValueType_CustomReal, ValueType_CustomText }
 
- Static Protected Member Functions inherited from PrsDim_Dimension
static Standard_Boolean CircleFromPlanarFace (const TopoDS_Face &theFace, Handle< Geom_Curve > &theCurve, gp_Pnt &theFirstPoint, gp_Pnt &theLastPoint)
 If it is possible extracts circle from planar face. More...
 
static Standard_Boolean CircleFromEdge (const TopoDS_Edge &theEdge, gp_Circ &theCircle, gp_Pnt &theFirstPoint, gp_Pnt &theLastPoint)
 If it is possible extracts circle from the edge. More...
 
- Static Protected Member Functions inherited from PrsMgr_PresentableObject
static const gp_TrsfgetIdentityTrsf ()
 Return the identity transformation. More...
 
- Protected Attributes inherited from PrsDim_Dimension
struct PrsDim_Dimension::SelectionGeometry mySelectionGeom
 Sensitive point tolerance for 2d text selection. More...
 
Standard_Real mySelToleranceForText2d
 Sensitive point tolerance for 2d text selection. More...
 
ValueType myValueType
 type of value (computed or user-defined) More...
 
Standard_Real myCustomValue
 type of value (computed or user-defined) More...
 
TCollection_ExtendedString myCustomStringValue
 Value of the dimension (computed or user-defined). More...
 
gp_Pnt myFixedTextPosition
 Stores text position fixed by user. More...
 
Standard_Boolean myIsTextPositionFixed
 Is the text label position fixed by user. More...
 
Standard_ExtCharacter mySpecialSymbol
 Special symbol. More...
 
PrsDim_DisplaySpecialSymbol myDisplaySpecialSymbol
 Special symbol display options. More...
 
GeometryType myGeometryType
 defines type of shapes on which the dimension is to be built. More...
 
gp_Pln myPlane
 Plane where dimension will be built (computed or user defined). More...
 
Standard_Boolean myIsPlaneCustom
 Is plane defined by user (otherwise it will be computed automatically). More...
 
Standard_Real myFlyout
 Flyout distance. More...
 
Standard_Boolean myIsGeometryValid
 Is dimension geometry properly defined. More...
 
- Protected Attributes inherited from AIS_InteractiveObject
AIS_InteractiveContextmyCTXPtr
 pointer to Interactive Context, where object is currently displayed; More...
 
Handle< Standard_TransientmyOwner
 application-specific owner object More...
 
- Protected Attributes inherited from SelectMgr_SelectableObject
SelectMgr_SequenceOfSelection myselections
 list of selections More...
 
Handle< Prs3d_PresentationmySelectionPrs
 optional presentation for highlighting selected object More...
 
Handle< Prs3d_PresentationmyHilightPrs
 optional presentation for highlighting detected object More...
 
Standard_Integer myGlobalSelMode
 global selection mode More...
 
Standard_Boolean myAutoHilight
 auto-highlighting flag defining More...
 
- Protected Attributes inherited from PrsMgr_PresentableObject
PrsMgr_PresentableObjectmyParent
 pointer to the parent object More...
 
PrsMgr_Presentations myPresentations
 list of presentations More...
 
Handle< Graphic3d_SequenceOfHClipPlanemyClipPlanes
 sequence of object-specific clipping planes More...
 
Handle< Prs3d_DrawermyDrawer
 main presentation attributes More...
 
Handle< Prs3d_DrawermyHilightDrawer
 (optional) custom presentation attributes for highlighting selected object More...
 
Handle< Prs3d_DrawermyDynHilightDrawer
 (optional) custom presentation attributes for highlighting detected object More...
 
Handle< Graphic3d_TransformPersmyTransformPersistence
 transformation persistence More...
 
Handle< TopLoc_Datum3DmyLocalTransformation
 local transformation relative to parent object More...
 
Handle< TopLoc_Datum3DmyTransformation
 absolute transformation of this object (combined parents + local transformations) More...
 
Handle< TopLoc_Datum3DmyCombinedParentTransform
 transformation of parent object (combined for all parents) More...
 
PrsMgr_ListOfPresentableObjects myChildren
 list of children More...
 
gp_GTrsf myInvTransformation
 inversion of absolute transformation (combined parents + local transformations) More...
 
PrsMgr_TypeOfPresentation3d myTypeOfPresentation3d
 presentation type More...
 
Aspect_TypeOfFacingModel myCurrentFacingModel
 current facing model More...
 
Standard_ShortReal myOwnWidth
 custom width value More...
 
Standard_Boolean hasOwnColor
 own color flag More...
 
Standard_Boolean hasOwnMaterial
 own material flag More...
 
Standard_Boolean myInfiniteState
 infinite flag More...
 
Standard_Boolean myIsMutable
 mutable flag More...
 
Standard_Boolean myHasOwnPresentations
 flag indicating if object should have own presentations More...
 
Standard_Boolean myToPropagateVisualState
 flag indicating if visual state (display/erase/color) should be propagated to all children More...
 

Detailed Description

Length dimension. Can be constructued:

In case of two points (vertices) or one linear edge the user-defined plane that includes this geometry is necessary to be set.

In case of face-edge, edge-vertex or face-face lengthes the automatic plane computing is allowed. For this plane the third point is found on the edge or on the face.

Please note that if the inappropriate geometry is defined or the distance between measured points is less than Precision::Confusion(), the dimension is invalid and its presentation can not be computed.

Constructor & Destructor Documentation

◆ PrsDim_LengthDimension() [1/5]

PrsDim_LengthDimension::PrsDim_LengthDimension ( const TopoDS_Face theFace,
const TopoDS_Edge theEdge 
)

Construct length dimension between face and edge. Here dimension can be built without user-defined plane.

Parameters
theFace[in] the face (first shape).
theEdge[in] the edge (second shape).

◆ PrsDim_LengthDimension() [2/5]

PrsDim_LengthDimension::PrsDim_LengthDimension ( const TopoDS_Face theFirstFace,
const TopoDS_Face theSecondFace 
)

Construct length dimension between two faces.

Parameters
theFirstFace[in] the first face (first shape).
theSecondFace[in] the second face (second shape).

◆ PrsDim_LengthDimension() [3/5]

PrsDim_LengthDimension::PrsDim_LengthDimension ( const gp_Pnt theFirstPoint,
const gp_Pnt theSecondPoint,
const gp_Pln thePlane 
)

Construct length dimension between two points in the specified plane.

Parameters
theFirstPoint[in] the first point.
theSecondPoint[in] the second point.
thePlane[in] the plane to orient dimension.

◆ PrsDim_LengthDimension() [4/5]

PrsDim_LengthDimension::PrsDim_LengthDimension ( const TopoDS_Shape theFirstShape,
const TopoDS_Shape theSecondShape,
const gp_Pln thePlane 
)

Construct length dimension between two arbitrary shapes in the specified plane.

Parameters
theFirstShape[in] the first shape.
theSecondShape[in] the second shape.
thePlane[in] the plane to orient dimension.

◆ PrsDim_LengthDimension() [5/5]

PrsDim_LengthDimension::PrsDim_LengthDimension ( const TopoDS_Edge theEdge,
const gp_Pln thePlane 
)

Construct length dimension of linear edge.

Parameters
theEdge[in] the edge to measure.
thePlane[in] the plane to orient dimension.

Member Function Documentation

◆ CheckPlane()

virtual Standard_Boolean PrsDim_LengthDimension::CheckPlane ( const gp_Pln thePlane) const
overrideprotectedvirtual

Checks if the plane includes first and second points to build dimension.

Reimplemented from PrsDim_Dimension.

◆ Compute()

virtual void PrsDim_LengthDimension::Compute ( const Handle< PrsMgr_PresentationManager3d > &  thePrsMgr,
const Handle< Prs3d_Presentation > &  thePrs,
const Standard_Integer  theMode = 0 
)
overrideprotectedvirtual

Calculates the 3D view presentation for specified display mode. This is a key interface for implementing Presentable Object interface.

Parameters
thePrsMgrpresentation manager where presentation has been created
thePrspresentation to fill
theModedisplay mode to compute; can be any number accepted by AcceptDisplayMode() method
See also
AcceptDisplayMode()

Implements PrsMgr_PresentableObject.

◆ ComputeFlyoutLinePoints()

virtual void PrsDim_LengthDimension::ComputeFlyoutLinePoints ( const gp_Pnt theFirstPoint,
const gp_Pnt theSecondPoint,
gp_Pnt theLineBegPoint,
gp_Pnt theLineEndPoint 
)
overrideprotectedvirtual

Computes points bounded the flyout line for linear dimension. Direction of flyout line equal to the custom direction of dimension if defined or parallel to the main direction line.

Parameters
theFirstPoint[in] the first attach point of linear dimension.
theSecondPoint[in] the second attach point of linear dimension.
theLineBegPoint[out] the first attach point of linear dimension.
theLineEndPoint[out] the second attach point of linear dimension.

Reimplemented from PrsDim_Dimension.

◆ ComputeFlyoutSelection()

virtual void PrsDim_LengthDimension::ComputeFlyoutSelection ( const Handle< SelectMgr_Selection > &  ,
const Handle< SelectMgr_EntityOwner > &   
)
overrideprotectedvirtual

Override this method to compute selection primitives for flyout lines (if the dimension provides it). This callback is a only a part of base selection computation routine.

Reimplemented from PrsDim_Dimension.

◆ ComputePlane()

virtual gp_Pln PrsDim_LengthDimension::ComputePlane ( const gp_Dir theAttachDir) const
protectedvirtual

◆ ComputeValue()

Standard_Real PrsDim_LengthDimension::ComputeValue ( ) const
overrideprotectedvirtual

Computes distance between dimension points. If custom direction is defined, the distance is a projection value of the distance between points to this direction.

Returns
dimension value

Reimplemented from PrsDim_Dimension.

◆ FirstPoint()

const gp_Pnt& PrsDim_LengthDimension::FirstPoint ( ) const
inline
Returns
first attachement point.

◆ FirstShape()

const TopoDS_Shape& PrsDim_LengthDimension::FirstShape ( ) const
inline
Returns
first attachement shape.

◆ GetDisplayUnits()

virtual const TCollection_AsciiString& PrsDim_LengthDimension::GetDisplayUnits ( ) const
overridevirtual
Returns
the display units string.

Reimplemented from PrsDim_Dimension.

◆ GetModelUnits()

virtual const TCollection_AsciiString& PrsDim_LengthDimension::GetModelUnits ( ) const
overridevirtual
Returns
the model units string.

Reimplemented from PrsDim_Dimension.

◆ GetTextPosition()

virtual gp_Pnt PrsDim_LengthDimension::GetTextPosition ( ) const
overridevirtual

Computes absolute text position from dimension parameters (flyout, plane and text alignment).

Reimplemented from PrsDim_Dimension.

◆ InitEdgeFaceLength()

Standard_Boolean PrsDim_LengthDimension::InitEdgeFaceLength ( const TopoDS_Edge theEdge,
const TopoDS_Face theFace,
gp_Dir theEdgeDir 
)
protected

Auxiliary method for InitTwoShapesPoints() in case of the distance between face and edge. The first attachment point is first parameter point from <theEdge>. Find the second attachment point which belongs to <theFace> Iterate over the edges of the face and find the closest point according to finded point on edge.

Parameters
theEdgeDir[out] is the direction on the edge to build automatical plane.

◆ InitEdgeVertexLength()

Standard_Boolean PrsDim_LengthDimension::InitEdgeVertexLength ( const TopoDS_Edge theEdge,
const TopoDS_Vertex theVertex,
gp_Dir theEdgeDir,
Standard_Boolean  isInfinite 
)
protected

Auxiliary method for InitTwoShapesPoints() in case of the distance between edge and vertex. Finds the point on the edge that is the closest one to <theVertex>.

Parameters
theEdgeDir[out] is the direction on the edge to build automatical plane.

◆ InitOneShapePoints()

Standard_Boolean PrsDim_LengthDimension::InitOneShapePoints ( const TopoDS_Shape theShape)
protected

Initialization of two attach points in case of one owner shape.

◆ InitTwoEdgesLength()

Standard_Boolean PrsDim_LengthDimension::InitTwoEdgesLength ( const TopoDS_Edge theFirstEdge,
const TopoDS_Edge theSecondEdge,
gp_Dir theEdgeDir 
)
protected

◆ InitTwoShapesPoints()

Standard_Boolean PrsDim_LengthDimension::InitTwoShapesPoints ( const TopoDS_Shape theFirstShape,
const TopoDS_Shape theSecondShape,
gp_Pln theComputedPlane,
Standard_Boolean theIsPlaneComputed 
)
protected

Initialization of two attach points in case of two owner shapes.

◆ IsValidPoints()

Standard_Boolean PrsDim_LengthDimension::IsValidPoints ( const gp_Pnt theFirstPoint,
const gp_Pnt theSecondPoint 
) const
protected

Checks that distance between two points is valid.

Parameters
theFirstPoint[in] the first point.
theSecondPoint[in] the second point.

◆ SecondPoint()

const gp_Pnt& PrsDim_LengthDimension::SecondPoint ( ) const
inline
Returns
second attachement point.

◆ SecondShape()

const TopoDS_Shape& PrsDim_LengthDimension::SecondShape ( ) const
inline
Returns
second attachement shape.

◆ SetDirection()

void PrsDim_LengthDimension::SetDirection ( const gp_Dir theDirection,
const Standard_Boolean  theUseDirection = Standard_True 
)

Set custom direction for dimension. If it is not set, the direction is obtained from the measured geometry (e.g. line between points of dimension) The direction does not change flyout direction of dimension.

Parameters
theDirection[in] the dimension direction.
theUseDirection[in] boolean value if custom direction should be used.

◆ SetDisplayUnits()

virtual void PrsDim_LengthDimension::SetDisplayUnits ( const TCollection_AsciiString theUnits)
overridevirtual

Reimplemented from PrsDim_Dimension.

◆ SetMeasuredGeometry() [1/4]

void PrsDim_LengthDimension::SetMeasuredGeometry ( const gp_Pnt theFirstPoint,
const gp_Pnt theSecondPoint,
const gp_Pln thePlane 
)

Measure distance between two points. The dimension will become invalid if the new distance between attachement points is less than Precision::Confusion().

Parameters
theFirstPoint[in] the first point.
theSecondPoint[in] the second point.
thePlane[in] the user-defined plane

◆ SetMeasuredGeometry() [2/4]

void PrsDim_LengthDimension::SetMeasuredGeometry ( const TopoDS_Edge theEdge,
const gp_Pln thePlane 
)

Measure length of edge. The dimension will become invalid if the new length of edge is less than Precision::Confusion().

Parameters
theEdge[in] the edge to measure.
thePlane[in] the user-defined plane

◆ SetMeasuredGeometry() [3/4]

void PrsDim_LengthDimension::SetMeasuredGeometry ( const TopoDS_Face theFirstFace,
const TopoDS_Face theSecondFace 
)

Measure distance between two faces. The dimension will become invalid if the distance can not be measured or it is less than Precision::Confusion().

Parameters
theFirstFace[in] the first face (first shape).
theSecondFace[in] the second face (second shape).

◆ SetMeasuredGeometry() [4/4]

void PrsDim_LengthDimension::SetMeasuredGeometry ( const TopoDS_Face theFace,
const TopoDS_Edge theEdge 
)

Measure distance between face and edge. The dimension will become invalid if the distance can not be measured or it is less than Precision::Confusion().

Parameters
theFace[in] the face (first shape).
theEdge[in] the edge (second shape).

◆ SetMeasuredShapes()

void PrsDim_LengthDimension::SetMeasuredShapes ( const TopoDS_Shape theFirstShape,
const TopoDS_Shape theSecondShape 
)

Measure distance between generic pair of shapes (edges, vertices, length), where measuring is applicable.

Parameters
theFirstShape[in] the first shape.
theSecondShape[in] the second shape.

◆ SetModelUnits()

virtual void PrsDim_LengthDimension::SetModelUnits ( const TCollection_AsciiString theUnits)
overridevirtual

Reimplemented from PrsDim_Dimension.

◆ SetTextPosition()

virtual void PrsDim_LengthDimension::SetTextPosition ( const gp_Pnt )
overridevirtual

Fixes the absolute text position and adjusts flyout, plane and text alignment according to it. Updates presentation if the text position is valid. ATTENTION! It does not change vertical text alignment.

Parameters
theTextPos[in] the point of text position.

Reimplemented from PrsDim_Dimension.


The documentation for this class was generated from the following file: