Abstract framework to define 3D sensitive entities. More...

#include <Select3D_SensitiveEntity.hxx>

Inheritance diagram for Select3D_SensitiveEntity:

[legend]

Public Member Functions
const Handle< SelectMgr_EntityOwner > &	OwnerId () const
	Returns pointer to owner of the entity. More...

virtual void	Set (const Handle< SelectMgr_EntityOwner > &theOwnerId)
	Sets owner of the entity. More...

Standard_Integer	SensitivityFactor () const
	allows a better sensitivity for a specific entity in selection algorithms useful for small sized entities. More...

void	SetSensitivityFactor (const Standard_Integer theNewSens)
	Allows to manage sensitivity of a particular sensitive entity. More...

virtual Handle< Select3D_SensitiveEntity >	GetConnected ()
	Originally this method intended to return sensitive entity with new location aLocation, but currently sensitive entities do not hold a location, instead HasLocation() and Location() methods call corresponding entity owner's methods. Thus all entities returned by GetConnected() share the same location propagated from corresponding selectable object. You must redefine this function for any type of sensitive entity which can accept another connected sensitive entity. More...

virtual Standard_Boolean	Matches (SelectBasics_SelectingVolumeManager &theMgr, SelectBasics_PickResult &thePickResult)=0
	Checks whether sensitive overlaps current selecting volume. Stores minimum depth, distance to center of geometry and closest point detected into thePickResult. More...

virtual Standard_Integer	NbSubElements () const =0
	Returns the number of sub-entities or elements in sensitive entity. Is used to determine if entity is complex and needs to pre-build BVH at the creation of sensitive entity step or is light-weighted so the tree can be build on demand with unnoticeable delay. More...

virtual Select3D_BndBox3d	BoundingBox ()=0
	Returns bounding box of a sensitive with transformation applied. More...

virtual gp_Pnt	CenterOfGeometry () const =0
	Returns center of a sensitive with transformation applied. More...

virtual void	BVH ()
	Builds BVH tree for a sensitive if needed. More...

virtual Standard_Boolean	ToBuildBVH () const
	Returns TRUE if BVH tree is in invalidated state. More...

virtual void	Clear ()
	Clears up all resources and memory. More...

virtual Standard_Boolean	HasInitLocation () const
	Returns true if the shape corresponding to the entity has init location. More...

virtual gp_GTrsf	InvInitLocation () const
	Returns inversed location transformation matrix if the shape corresponding to this entity has init location set. Otherwise, returns identity matrix. More...

virtual void	DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const
	Dumps the content of me into the stream. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Protected Member Functions
	Select3D_SensitiveEntity (const Handle< SelectMgr_EntityOwner > &theOwnerId)

Protected Attributes
Handle< SelectMgr_EntityOwner >	myOwnerId

Standard_Integer	mySFactor

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Detailed Description

Abstract framework to define 3D sensitive entities.

Constructor & Destructor Documentation

◆ Select3D_SensitiveEntity()

Select3D_SensitiveEntity::Select3D_SensitiveEntity ( const Handle< SelectMgr_EntityOwner > & theOwnerId )

protected

Member Function Documentation

◆ BoundingBox()

virtual Select3D_BndBox3d Select3D_SensitiveEntity::BoundingBox ( )

pure virtual

Returns bounding box of a sensitive with transformation applied.

Implemented in Select3D_SensitivePrimitiveArray, Select3D_SensitiveGroup, Select3D_SensitivePoly, Select3D_SensitiveSet, Select3D_SensitiveTriangulation, Select3D_SensitiveBox, Select3D_InteriorSensitivePointSet, Select3D_SensitiveFace, Select3D_SensitiveSegment, Select3D_SensitiveTriangle, MeshVS_SensitivePolyhedron, MeshVS_CommonSensitiveEntity, MeshVS_SensitiveQuad, MeshVS_SensitiveMesh, Select3D_SensitivePoint, Select3D_SensitiveWire, and MeshVS_DummySensitiveEntity.

◆ BVH()

virtual void Select3D_SensitiveEntity::BVH ( )

inlinevirtual

Builds BVH tree for a sensitive if needed.

Reimplemented in Select3D_SensitivePrimitiveArray, Select3D_SensitiveCircle, Select3D_SensitiveSet, Select3D_SensitiveFace, and MeshVS_DummySensitiveEntity.

◆ CenterOfGeometry()

virtual gp_Pnt Select3D_SensitiveEntity::CenterOfGeometry ( ) const

pure virtual

Returns center of a sensitive with transformation applied.

Implemented in Select3D_SensitivePrimitiveArray, Select3D_SensitiveGroup, Select3D_SensitivePoly, Select3D_SensitiveSet, Select3D_SensitiveTriangulation, Select3D_SensitiveCircle, Select3D_SensitiveTriangle, Select3D_InteriorSensitivePointSet, Select3D_SensitiveFace, Select3D_SensitiveBox, MeshVS_SensitivePolyhedron, MeshVS_CommonSensitiveEntity, Select3D_SensitiveSegment, MeshVS_SensitiveMesh, Select3D_SensitiveWire, MeshVS_SensitiveQuad, MeshVS_DummySensitiveEntity, and Select3D_SensitivePoint.

◆ Clear()

virtual void Select3D_SensitiveEntity::Clear ( )

inlinevirtual

Clears up all resources and memory.

Reimplemented in Select3D_SensitiveSet, Select3D_SensitiveGroup, and MeshVS_DummySensitiveEntity.

◆ DumpJson()

virtual void Select3D_SensitiveEntity::DumpJson	(	Standard_OStream &	theOStream,
		Standard_Integer	theDepth = `-1`
	)		const

virtual

Dumps the content of me into the stream.

Reimplemented in Select3D_SensitivePrimitiveArray, Select3D_SensitiveGroup, Select3D_SensitivePoly, Select3D_SensitiveSet, Select3D_SensitiveTriangulation, Select3D_SensitiveFace, Select3D_SensitiveBox, Select3D_SensitiveSegment, Select3D_InteriorSensitivePointSet, Select3D_SensitiveTriangle, Select3D_SensitiveWire, and Select3D_SensitivePoint.

◆ GetConnected()

virtual Handle< Select3D_SensitiveEntity > Select3D_SensitiveEntity::GetConnected ( )

inlinevirtual

Originally this method intended to return sensitive entity with new location aLocation, but currently sensitive entities do not hold a location, instead HasLocation() and Location() methods call corresponding entity owner's methods. Thus all entities returned by GetConnected() share the same location propagated from corresponding selectable object. You must redefine this function for any type of sensitive entity which can accept another connected sensitive entity.

Reimplemented in Select3D_SensitivePrimitiveArray, Select3D_SensitiveGroup, Select3D_SensitiveCircle, MeshVS_CommonSensitiveEntity, Select3D_SensitiveFace, Select3D_SensitiveTriangulation, Select3D_SensitiveCurve, Select3D_SensitiveTriangle, MeshVS_SensitivePolyhedron, Select3D_SensitiveSegment, Select3D_SensitiveBox, MeshVS_SensitiveQuad, MeshVS_SensitiveMesh, Select3D_SensitiveWire, and Select3D_SensitivePoint.

◆ HasInitLocation()

virtual Standard_Boolean Select3D_SensitiveEntity::HasInitLocation ( ) const

inlinevirtual

Returns true if the shape corresponding to the entity has init location.

Reimplemented in Select3D_SensitivePrimitiveArray, Select3D_SensitiveTriangulation, and MeshVS_DummySensitiveEntity.

◆ InvInitLocation()

virtual gp_GTrsf Select3D_SensitiveEntity::InvInitLocation ( ) const

inlinevirtual

Returns inversed location transformation matrix if the shape corresponding to this entity has init location set. Otherwise, returns identity matrix.

Reimplemented in Select3D_SensitivePrimitiveArray, Select3D_SensitiveTriangulation, and MeshVS_DummySensitiveEntity.

◆ Matches()

virtual Standard_Boolean Select3D_SensitiveEntity::Matches	(	SelectBasics_SelectingVolumeManager &	theMgr,
		SelectBasics_PickResult &	thePickResult
	)

pure virtual

Checks whether sensitive overlaps current selecting volume. Stores minimum depth, distance to center of geometry and closest point detected into thePickResult.

Implemented in Select3D_SensitivePrimitiveArray, Select3D_SensitiveGroup, Select3D_SensitiveCircle, Select3D_SensitiveSet, Select3D_SensitiveFace, Select3D_SensitiveSegment, MeshVS_SensitivePolyhedron, Select3D_SensitiveBox, MeshVS_SensitiveQuad, Select3D_SensitiveTriangle, MeshVS_SensitiveMesh, Select3D_SensitivePoint, and MeshVS_DummySensitiveEntity.

◆ NbSubElements()

virtual Standard_Integer Select3D_SensitiveEntity::NbSubElements ( ) const

pure virtual

Returns the number of sub-entities or elements in sensitive entity. Is used to determine if entity is complex and needs to pre-build BVH at the creation of sensitive entity step or is light-weighted so the tree can be build on demand with unnoticeable delay.

Implemented in Select3D_SensitivePrimitiveArray, Select3D_SensitiveGroup, Select3D_SensitiveFace, Select3D_InteriorSensitivePointSet, Select3D_SensitiveTriangle, Select3D_SensitivePoly, Select3D_SensitiveTriangulation, MeshVS_SensitivePolyhedron, MeshVS_SensitiveMesh, Select3D_SensitiveSegment, Select3D_SensitiveBox, MeshVS_SensitiveQuad, MeshVS_CommonSensitiveEntity, MeshVS_DummySensitiveEntity, Select3D_SensitiveWire, and Select3D_SensitivePoint.

◆ OwnerId()

const Handle< SelectMgr_EntityOwner >& Select3D_SensitiveEntity::OwnerId ( ) const

inline

Returns pointer to owner of the entity.

◆ SensitivityFactor()

Standard_Integer Select3D_SensitiveEntity::SensitivityFactor ( ) const

inline

allows a better sensitivity for a specific entity in selection algorithms useful for small sized entities.

◆ Set()

virtual void Select3D_SensitiveEntity::Set ( const Handle< SelectMgr_EntityOwner > & theOwnerId )

inlinevirtual

Sets owner of the entity.

Reimplemented in Select3D_SensitivePrimitiveArray, Select3D_SensitiveGroup, and Select3D_SensitiveWire.

◆ SetSensitivityFactor()

void Select3D_SensitiveEntity::SetSensitivityFactor ( const Standard_Integer theNewSens )

inline

Allows to manage sensitivity of a particular sensitive entity.

◆ ToBuildBVH()

virtual Standard_Boolean Select3D_SensitiveEntity::ToBuildBVH ( ) const

inlinevirtual

Returns TRUE if BVH tree is in invalidated state.

Reimplemented in Select3D_SensitiveCircle, Select3D_SensitiveSet, Select3D_SensitiveBox, Select3D_SensitiveFace, Select3D_SensitiveSegment, Select3D_SensitiveTriangle, Select3D_SensitivePoint, and MeshVS_DummySensitiveEntity.

Field Documentation

◆ myOwnerId

Handle< SelectMgr_EntityOwner > Select3D_SensitiveEntity::myOwnerId

protected

◆ mySFactor

Standard_Integer Select3D_SensitiveEntity::mySFactor

protected

The documentation for this class was generated from the following file:

Select3D_SensitiveEntity.hxx

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ Select3D_SensitiveEntity()

Member Function Documentation

◆ BoundingBox()

◆ BVH()

◆ CenterOfGeometry()

◆ Clear()

◆ DumpJson()

◆ GetConnected()

◆ HasInitLocation()

◆ InvInitLocation()

◆ Matches()

◆ NbSubElements()

◆ OwnerId()

◆ SensitivityFactor()

◆ Set()

◆ SetSensitivityFactor()

◆ ToBuildBVH()

Field Documentation

◆ myOwnerId

◆ mySFactor