Open CASCADE Technology  7.5.0
Public Member Functions
gp_Circ2d Class Reference

Describes a circle in the plane (2D space). A circle is defined by its radius and positioned in the plane with a coordinate system (a gp_Ax22d object) as follows: More...

#include <gp_Circ2d.hxx>

Public Member Functions

 gp_Circ2d ()
 creates an indefinite circle. More...
 
 gp_Circ2d (const gp_Ax2d &XAxis, const Standard_Real Radius, const Standard_Boolean Sense=Standard_True)
 The location point of XAxis is the center of the circle. Warnings : It is not forbidden to create a circle with Radius = 0.0 Raises ConstructionError if Radius < 0.0. Raised if Radius < 0.0. More...
 
 gp_Circ2d (const gp_Ax22d &Axis, const Standard_Real Radius)
 Axis defines the Xaxis and Yaxis of the circle which defines the origin and the sense of parametrization. The location point of Axis is the center of the circle. Warnings : It is not forbidden to create a circle with Radius = 0.0 Raises ConstructionError if Radius < 0.0. Raised if Radius < 0.0. More...
 
void SetLocation (const gp_Pnt2d &P)
 Changes the location point (center) of the circle. More...
 
void SetXAxis (const gp_Ax2d &A)
 Changes the X axis of the circle. More...
 
void SetAxis (const gp_Ax22d &A)
 Changes the X axis of the circle. More...
 
void SetYAxis (const gp_Ax2d &A)
 Changes the Y axis of the circle. More...
 
void SetRadius (const Standard_Real Radius)
 Modifies the radius of this circle. This class does not prevent the creation of a circle where Radius is null. Exceptions Standard_ConstructionError if Radius is negative. More...
 
Standard_Real Area () const
 Computes the area of the circle. More...
 
void Coefficients (Standard_Real &A, Standard_Real &B, Standard_Real &C, Standard_Real &D, Standard_Real &E, Standard_Real &F) const
 Returns the normalized coefficients from the implicit equation of the circle : A * (X**2) + B * (Y**2) + 2*C*(X*Y) + 2*D*X + 2*E*Y + F = 0.0. More...
 
Standard_Boolean Contains (const gp_Pnt2d &P, const Standard_Real LinearTolerance) const
 Does <me> contain P ? Returns True if the distance between P and any point on the circumference of the circle is lower of equal to <LinearTolerance>. More...
 
Standard_Real Distance (const gp_Pnt2d &P) const
 Computes the minimum of distance between the point P and any point on the circumference of the circle. More...
 
Standard_Real SquareDistance (const gp_Pnt2d &P) const
 Computes the square distance between <me> and the point P. More...
 
Standard_Real Length () const
 computes the circumference of the circle. More...
 
const gp_Pnt2dLocation () const
 Returns the location point (center) of the circle. More...
 
Standard_Real Radius () const
 Returns the radius value of the circle. More...
 
const gp_Ax22dAxis () const
 returns the position of the circle. More...
 
const gp_Ax22dPosition () const
 returns the position of the circle. Idem Axis(me). More...
 
gp_Ax2d XAxis () const
 returns the X axis of the circle. More...
 
gp_Ax2d YAxis () const
 Returns the Y axis of the circle. Reverses the direction of the circle. More...
 
void Reverse ()
 Reverses the orientation of the local coordinate system of this circle (the "Y Direction" is reversed) and therefore changes the implicit orientation of this circle. Reverse assigns the result to this circle,. More...
 
gp_Circ2d Reversed () const
 Reverses the orientation of the local coordinate system of this circle (the "Y Direction" is reversed) and therefore changes the implicit orientation of this circle. Reversed creates a new circle. More...
 
Standard_Boolean IsDirect () const
 Returns true if the local coordinate system is direct and false in the other case. More...
 
void Mirror (const gp_Pnt2d &P)
 
gp_Circ2d Mirrored (const gp_Pnt2d &P) const
 Performs the symmetrical transformation of a circle with respect to the point P which is the center of the symmetry. More...
 
void Mirror (const gp_Ax2d &A)
 
gp_Circ2d Mirrored (const gp_Ax2d &A) const
 Performs the symmetrical transformation of a circle with respect to an axis placement which is the axis of the symmetry. More...
 
void Rotate (const gp_Pnt2d &P, const Standard_Real Ang)
 
gp_Circ2d Rotated (const gp_Pnt2d &P, const Standard_Real Ang) const
 Rotates a circle. P is the center of the rotation. Ang is the angular value of the rotation in radians. More...
 
void Scale (const gp_Pnt2d &P, const Standard_Real S)
 
gp_Circ2d Scaled (const gp_Pnt2d &P, const Standard_Real S) const
 Scales a circle. S is the scaling value. Warnings : If S is negative the radius stay positive but the "XAxis" and the "YAxis" are reversed as for an ellipse. More...
 
void Transform (const gp_Trsf2d &T)
 
gp_Circ2d Transformed (const gp_Trsf2d &T) const
 Transforms a circle with the transformation T from class Trsf2d. More...
 
void Translate (const gp_Vec2d &V)
 
gp_Circ2d Translated (const gp_Vec2d &V) const
 Translates a circle in the direction of the vector V. The magnitude of the translation is the vector's magnitude. More...
 
void Translate (const gp_Pnt2d &P1, const gp_Pnt2d &P2)
 
gp_Circ2d Translated (const gp_Pnt2d &P1, const gp_Pnt2d &P2) const
 Translates a circle from the point P1 to the point P2. More...
 

Detailed Description

Describes a circle in the plane (2D space). A circle is defined by its radius and positioned in the plane with a coordinate system (a gp_Ax22d object) as follows:

Constructor & Destructor Documentation

◆ gp_Circ2d() [1/3]

gp_Circ2d::gp_Circ2d ( )

creates an indefinite circle.

◆ gp_Circ2d() [2/3]

gp_Circ2d::gp_Circ2d ( const gp_Ax2d XAxis,
const Standard_Real  Radius,
const Standard_Boolean  Sense = Standard_True 
)

The location point of XAxis is the center of the circle. Warnings : It is not forbidden to create a circle with Radius = 0.0 Raises ConstructionError if Radius < 0.0. Raised if Radius < 0.0.

◆ gp_Circ2d() [3/3]

gp_Circ2d::gp_Circ2d ( const gp_Ax22d Axis,
const Standard_Real  Radius 
)

Axis defines the Xaxis and Yaxis of the circle which defines the origin and the sense of parametrization. The location point of Axis is the center of the circle. Warnings : It is not forbidden to create a circle with Radius = 0.0 Raises ConstructionError if Radius < 0.0. Raised if Radius < 0.0.

Member Function Documentation

◆ Area()

Standard_Real gp_Circ2d::Area ( ) const

Computes the area of the circle.

◆ Axis()

const gp_Ax22d& gp_Circ2d::Axis ( ) const

returns the position of the circle.

◆ Coefficients()

void gp_Circ2d::Coefficients ( Standard_Real A,
Standard_Real B,
Standard_Real C,
Standard_Real D,
Standard_Real E,
Standard_Real F 
) const

Returns the normalized coefficients from the implicit equation of the circle : A * (X**2) + B * (Y**2) + 2*C*(X*Y) + 2*D*X + 2*E*Y + F = 0.0.

◆ Contains()

Standard_Boolean gp_Circ2d::Contains ( const gp_Pnt2d P,
const Standard_Real  LinearTolerance 
) const

Does <me> contain P ? Returns True if the distance between P and any point on the circumference of the circle is lower of equal to <LinearTolerance>.

◆ Distance()

Standard_Real gp_Circ2d::Distance ( const gp_Pnt2d P) const

Computes the minimum of distance between the point P and any point on the circumference of the circle.

◆ IsDirect()

Standard_Boolean gp_Circ2d::IsDirect ( ) const

Returns true if the local coordinate system is direct and false in the other case.

◆ Length()

Standard_Real gp_Circ2d::Length ( ) const

computes the circumference of the circle.

◆ Location()

const gp_Pnt2d& gp_Circ2d::Location ( ) const

Returns the location point (center) of the circle.

◆ Mirror() [1/2]

void gp_Circ2d::Mirror ( const gp_Pnt2d P)

◆ Mirror() [2/2]

void gp_Circ2d::Mirror ( const gp_Ax2d A)

◆ Mirrored() [1/2]

gp_Circ2d gp_Circ2d::Mirrored ( const gp_Pnt2d P) const

Performs the symmetrical transformation of a circle with respect to the point P which is the center of the symmetry.

◆ Mirrored() [2/2]

gp_Circ2d gp_Circ2d::Mirrored ( const gp_Ax2d A) const

Performs the symmetrical transformation of a circle with respect to an axis placement which is the axis of the symmetry.

◆ Position()

const gp_Ax22d& gp_Circ2d::Position ( ) const

returns the position of the circle. Idem Axis(me).

◆ Radius()

Standard_Real gp_Circ2d::Radius ( ) const

Returns the radius value of the circle.

◆ Reverse()

void gp_Circ2d::Reverse ( )

Reverses the orientation of the local coordinate system of this circle (the "Y Direction" is reversed) and therefore changes the implicit orientation of this circle. Reverse assigns the result to this circle,.

◆ Reversed()

gp_Circ2d gp_Circ2d::Reversed ( ) const

Reverses the orientation of the local coordinate system of this circle (the "Y Direction" is reversed) and therefore changes the implicit orientation of this circle. Reversed creates a new circle.

◆ Rotate()

void gp_Circ2d::Rotate ( const gp_Pnt2d P,
const Standard_Real  Ang 
)

◆ Rotated()

gp_Circ2d gp_Circ2d::Rotated ( const gp_Pnt2d P,
const Standard_Real  Ang 
) const

Rotates a circle. P is the center of the rotation. Ang is the angular value of the rotation in radians.

◆ Scale()

void gp_Circ2d::Scale ( const gp_Pnt2d P,
const Standard_Real  S 
)

◆ Scaled()

gp_Circ2d gp_Circ2d::Scaled ( const gp_Pnt2d P,
const Standard_Real  S 
) const

Scales a circle. S is the scaling value. Warnings : If S is negative the radius stay positive but the "XAxis" and the "YAxis" are reversed as for an ellipse.

◆ SetAxis()

void gp_Circ2d::SetAxis ( const gp_Ax22d A)

Changes the X axis of the circle.

◆ SetLocation()

void gp_Circ2d::SetLocation ( const gp_Pnt2d P)

Changes the location point (center) of the circle.

◆ SetRadius()

void gp_Circ2d::SetRadius ( const Standard_Real  Radius)

Modifies the radius of this circle. This class does not prevent the creation of a circle where Radius is null. Exceptions Standard_ConstructionError if Radius is negative.

◆ SetXAxis()

void gp_Circ2d::SetXAxis ( const gp_Ax2d A)

Changes the X axis of the circle.

◆ SetYAxis()

void gp_Circ2d::SetYAxis ( const gp_Ax2d A)

Changes the Y axis of the circle.

◆ SquareDistance()

Standard_Real gp_Circ2d::SquareDistance ( const gp_Pnt2d P) const

Computes the square distance between <me> and the point P.

◆ Transform()

void gp_Circ2d::Transform ( const gp_Trsf2d T)

◆ Transformed()

gp_Circ2d gp_Circ2d::Transformed ( const gp_Trsf2d T) const

Transforms a circle with the transformation T from class Trsf2d.

◆ Translate() [1/2]

void gp_Circ2d::Translate ( const gp_Vec2d V)

◆ Translate() [2/2]

void gp_Circ2d::Translate ( const gp_Pnt2d P1,
const gp_Pnt2d P2 
)

◆ Translated() [1/2]

gp_Circ2d gp_Circ2d::Translated ( const gp_Vec2d V) const

Translates a circle in the direction of the vector V. The magnitude of the translation is the vector's magnitude.

◆ Translated() [2/2]

gp_Circ2d gp_Circ2d::Translated ( const gp_Pnt2d P1,
const gp_Pnt2d P2 
) const

Translates a circle from the point P1 to the point P2.

◆ XAxis()

gp_Ax2d gp_Circ2d::XAxis ( ) const

returns the X axis of the circle.

◆ YAxis()

gp_Ax2d gp_Circ2d::YAxis ( ) const

Returns the Y axis of the circle. Reverses the direction of the circle.


The documentation for this class was generated from the following file: