Open CASCADE Technology  6.9.0
Public Member Functions
BRepCheck_Wire Class Reference

#include <BRepCheck_Wire.hxx>

Inheritance diagram for BRepCheck_Wire:
Inheritance graph
[legend]

Public Member Functions

 BRepCheck_Wire (const TopoDS_Wire &W)
 
void InContext (const TopoDS_Shape &ContextShape)
 if <ContextShape> is a face, consequently checks SelfIntersect(), Closed(), Orientation() and Closed2d until faulty is found More...
 
void Minimum ()
 checks that the wire is not empty and "connex". Called by constructor More...
 
void Blind ()
 Does nothing. More...
 
BRepCheck_Status Closed (const Standard_Boolean Update=Standard_False)
 Checks if the oriented edges of the wire give a closed wire. If the wire is closed, returns BRepCheck_NoError. Warning : if the first and last edge are infinite, the wire will be considered as a closed one. If <Update> is set to Standard_True, registers the status in the list. May return (and registers): **BRepCheck_NotConnected, if wire is not topologically closed **BRepCheck_RedundantEdge, if an edge is in wire more than 3 times or in case of 2 occurences if not with FORWARD and REVERSED orientation. **BRepCheck_NoError. More...
 
BRepCheck_Status Closed2d (const TopoDS_Face &F, const Standard_Boolean Update=Standard_False)
 Checks if edges of the wire give a wire closed in 2d space. Returns BRepCheck_NoError, or BRepCheck_NotClosed If <Update> is set to Standard_True, registers the status in the list. More...
 
BRepCheck_Status Orientation (const TopoDS_Face &F, const Standard_Boolean Update=Standard_False)
 Checks if the oriented edges of the wire are correctly oriented. An internal call is made to the method Closed. If no face exists, call the method with a null face (TopoDS_face()). If <Update> is set to Standard_True, registers the status in the list. May return (and registers): BRepCheck_InvalidDegeneratedFlag, BRepCheck_BadOrientationOfSubshape, BRepCheck_NotClosed, BRepCheck_NoError. More...
 
BRepCheck_Status SelfIntersect (const TopoDS_Face &F, TopoDS_Edge &E1, TopoDS_Edge &E2, const Standard_Boolean Update=Standard_False)
 Checks if the wire intersect itself on the face <F>. <E1> and <E2> are the first intersecting edges found. <E2> may be a null edge when a self-intersecting edge is found.If <Update> is set to Standard_True, registers the status in the list. May return (and register): BRepCheck_EmptyWire, BRepCheck_SelfIntersectingWire, BRepCheck_NoCurveOnSurface, BRepCheck_NoError. More...
 
Standard_Boolean GeometricControls () const
 report SelfIntersect() check would be (is) done More...
 
void GeometricControls (const Standard_Boolean B)
 set SelfIntersect() to be checked More...
 
void SetStatus (const BRepCheck_Status theStatus)
 Sets status of Wire;. More...
 
- Public Member Functions inherited from BRepCheck_Result
void Init (const TopoDS_Shape &S)
 
void SetFailStatus (const TopoDS_Shape &S)
 
const BRepCheck_ListOfStatusStatus () const
 
Standard_Boolean IsMinimum () const
 
Standard_Boolean IsBlind () const
 
const BRepCheck_ListOfStatusStatusOnShape (const TopoDS_Shape &S)
 If not already done, performs the InContext control and returns the list of status. More...
 
void InitContextIterator ()
 
Standard_Boolean MoreShapeInContext () const
 
const TopoDS_ShapeContextualShape () const
 
const BRepCheck_ListOfStatusStatusOnShape () const
 
void NextShapeInContext ()
 
- Public Member Functions inherited from MMgt_TShared
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual const
Handle_Standard_Type & 
DynamicType () const
 Returns a type information object about this object. More...
 
Standard_Boolean IsInstance (const Handle_Standard_Type &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const Handle_Standard_Type &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
virtual Handle_Standard_Transient This () const
 Returns a Handle which references this object. Must never be called to objects created in stack. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 

Additional Inherited Members

- Protected Member Functions inherited from BRepCheck_Result
 BRepCheck_Result ()
 
- Protected Attributes inherited from BRepCheck_Result
TopoDS_Shape myShape
 
Standard_Boolean myMin
 
Standard_Boolean myBlind
 
BRepCheck_DataMapOfShapeListOfStatus myMap
 

Constructor & Destructor Documentation

BRepCheck_Wire::BRepCheck_Wire ( const TopoDS_Wire W)

Member Function Documentation

void BRepCheck_Wire::Blind ( )
virtual

Does nothing.

Implements BRepCheck_Result.

BRepCheck_Status BRepCheck_Wire::Closed ( const Standard_Boolean  Update = Standard_False)

Checks if the oriented edges of the wire give a closed wire. If the wire is closed, returns BRepCheck_NoError. Warning : if the first and last edge are infinite, the wire will be considered as a closed one. If <Update> is set to Standard_True, registers the status in the list. May return (and registers): **BRepCheck_NotConnected, if wire is not topologically closed **BRepCheck_RedundantEdge, if an edge is in wire more than 3 times or in case of 2 occurences if not with FORWARD and REVERSED orientation. **BRepCheck_NoError.

BRepCheck_Status BRepCheck_Wire::Closed2d ( const TopoDS_Face F,
const Standard_Boolean  Update = Standard_False 
)

Checks if edges of the wire give a wire closed in 2d space. Returns BRepCheck_NoError, or BRepCheck_NotClosed If <Update> is set to Standard_True, registers the status in the list.

Standard_Boolean BRepCheck_Wire::GeometricControls ( ) const

report SelfIntersect() check would be (is) done

void BRepCheck_Wire::GeometricControls ( const Standard_Boolean  B)

set SelfIntersect() to be checked

void BRepCheck_Wire::InContext ( const TopoDS_Shape ContextShape)
virtual

if <ContextShape> is a face, consequently checks SelfIntersect(), Closed(), Orientation() and Closed2d until faulty is found

Implements BRepCheck_Result.

void BRepCheck_Wire::Minimum ( )
virtual

checks that the wire is not empty and "connex". Called by constructor

Implements BRepCheck_Result.

BRepCheck_Status BRepCheck_Wire::Orientation ( const TopoDS_Face F,
const Standard_Boolean  Update = Standard_False 
)

Checks if the oriented edges of the wire are correctly oriented. An internal call is made to the method Closed. If no face exists, call the method with a null face (TopoDS_face()). If <Update> is set to Standard_True, registers the status in the list. May return (and registers): BRepCheck_InvalidDegeneratedFlag, BRepCheck_BadOrientationOfSubshape, BRepCheck_NotClosed, BRepCheck_NoError.

BRepCheck_Status BRepCheck_Wire::SelfIntersect ( const TopoDS_Face F,
TopoDS_Edge E1,
TopoDS_Edge E2,
const Standard_Boolean  Update = Standard_False 
)

Checks if the wire intersect itself on the face <F>. <E1> and <E2> are the first intersecting edges found. <E2> may be a null edge when a self-intersecting edge is found.If <Update> is set to Standard_True, registers the status in the list. May return (and register): BRepCheck_EmptyWire, BRepCheck_SelfIntersectingWire, BRepCheck_NoCurveOnSurface, BRepCheck_NoError.

void BRepCheck_Wire::SetStatus ( const BRepCheck_Status  theStatus)

Sets status of Wire;.


The documentation for this class was generated from the following file: