Open CASCADE Technology  6.9.0
Public Member Functions
FilletSurf_Builder Class Reference

API giving the following geometric information about fillets list of corresponding NUBS surfaces for each surface: the 2 support faces on each face: the 3d curve and the corresponding 2d curve the 2d curves on the fillet status of start and end section of the fillet first and last parameter on edge of the fillet. More...

#include <FilletSurf_Builder.hxx>

Public Member Functions

 FilletSurf_Builder (const TopoDS_Shape &S, const TopTools_ListOfShape &E, const Standard_Real R, const Standard_Real Ta=1.0e-2, const Standard_Real Tapp3d=1.0e-4, const Standard_Real Tapp2d=1.0e-5)
 initialize of the informations necessary for the computation of the fillet on the Shape S from a list of edges E and a radius R. More...
 
void Perform ()
 —Purpose computation of the fillet (list of NUBS) More...
 
void Simulate ()
 
FilletSurf_StatusDone IsDone () const
 gives the status about the computation of the fillet returns: IsOK :no problem during the computation IsNotOk: no result is produced IsPartial: the result is partial More...
 
FilletSurf_ErrorTypeStatus StatusError () const
 gives informations about error status if IsDone=IsNotOk returns EdgeNotG1: the edges are not G1 FacesNotG1 : two connected faces on a same support are not G1 EdgeNotOnShape: the edge is not on shape NotSharpEdge: the edge is not sharp PbFilletCompute: problem during the computation of the fillet More...
 
Standard_Integer NbSurface () const
 gives the number of NUBS surfaces of the Fillet. More...
 
const Handle< Geom_Surface > & SurfaceFillet (const Standard_Integer Index) const
 gives the NUBS surface of index Index. More...
 
Standard_Real TolApp3d (const Standard_Integer Index) const
 gives the 3d tolerance reached during approximation of surface of index Index More...
 
const TopoDS_FaceSupportFace1 (const Standard_Integer Index) const
 gives the first support face relative to SurfaceFillet(Index); More...
 
const TopoDS_FaceSupportFace2 (const Standard_Integer Index) const
 gives the second support face relative to SurfaceFillet(Index); More...
 
const Handle< Geom_Curve > & CurveOnFace1 (const Standard_Integer Index) const
 gives the 3d curve of SurfaceFillet(Index) on SupportFace1(Index) More...
 
const Handle< Geom_Curve > & CurveOnFace2 (const Standard_Integer Index) const
 gives the 3d curve of SurfaceFillet(Index) on SupportFace2(Index) More...
 
const Handle< Geom2d_Curve > & PCurveOnFace1 (const Standard_Integer Index) const
 gives the PCurve associated to CurvOnSup1(Index) on the support face More...
 
const Handle< Geom2d_Curve > & PCurve1OnFillet (const Standard_Integer Index) const
 gives the PCurve associated to CurveOnFace1(Index) on the Fillet More...
 
const Handle< Geom2d_Curve > & PCurveOnFace2 (const Standard_Integer Index) const
 gives the PCurve associated to CurveOnSup2(Index) on the support face More...
 
const Handle< Geom2d_Curve > & PCurve2OnFillet (const Standard_Integer Index) const
 gives the PCurve associated to CurveOnSup2(Index) on the fillet More...
 
Standard_Real FirstParameter () const
 gives the parameter of the fillet on the first edge. More...
 
Standard_Real LastParameter () const
 gives the parameter of the fillet on the last edge More...
 
FilletSurf_StatusType StartSectionStatus () const
 
FilletSurf_StatusType EndSectionStatus () const
 
Standard_Integer NbSection (const Standard_Integer IndexSurf) const
 
void Section (const Standard_Integer IndexSurf, const Standard_Integer IndexSec, Handle< Geom_TrimmedCurve > &Circ) const
 

Detailed Description

API giving the following geometric information about fillets list of corresponding NUBS surfaces for each surface: the 2 support faces on each face: the 3d curve and the corresponding 2d curve the 2d curves on the fillet status of start and end section of the fillet first and last parameter on edge of the fillet.

Constructor & Destructor Documentation

FilletSurf_Builder::FilletSurf_Builder ( const TopoDS_Shape S,
const TopTools_ListOfShape E,
const Standard_Real  R,
const Standard_Real  Ta = 1.0e-2,
const Standard_Real  Tapp3d = 1.0e-4,
const Standard_Real  Tapp2d = 1.0e-5 
)

initialize of the informations necessary for the computation of the fillet on the Shape S from a list of edges E and a radius R.

Ta is the angular tolerance Tapp3d is the 3d approximation tolerance Tapp2d is the 2d approximation tolerance

Member Function Documentation

const Handle< Geom_Curve >& FilletSurf_Builder::CurveOnFace1 ( const Standard_Integer  Index) const

gives the 3d curve of SurfaceFillet(Index) on SupportFace1(Index)

const Handle< Geom_Curve >& FilletSurf_Builder::CurveOnFace2 ( const Standard_Integer  Index) const

gives the 3d curve of SurfaceFillet(Index) on SupportFace2(Index)

FilletSurf_StatusType FilletSurf_Builder::EndSectionStatus ( ) const
Standard_Real FilletSurf_Builder::FirstParameter ( ) const

gives the parameter of the fillet on the first edge.

FilletSurf_StatusDone FilletSurf_Builder::IsDone ( ) const

gives the status about the computation of the fillet returns: IsOK :no problem during the computation IsNotOk: no result is produced IsPartial: the result is partial

Standard_Real FilletSurf_Builder::LastParameter ( ) const

gives the parameter of the fillet on the last edge

Standard_Integer FilletSurf_Builder::NbSection ( const Standard_Integer  IndexSurf) const
Standard_Integer FilletSurf_Builder::NbSurface ( ) const

gives the number of NUBS surfaces of the Fillet.

const Handle< Geom2d_Curve >& FilletSurf_Builder::PCurve1OnFillet ( const Standard_Integer  Index) const

gives the PCurve associated to CurveOnFace1(Index) on the Fillet

const Handle< Geom2d_Curve >& FilletSurf_Builder::PCurve2OnFillet ( const Standard_Integer  Index) const

gives the PCurve associated to CurveOnSup2(Index) on the fillet

const Handle< Geom2d_Curve >& FilletSurf_Builder::PCurveOnFace1 ( const Standard_Integer  Index) const

gives the PCurve associated to CurvOnSup1(Index) on the support face

const Handle< Geom2d_Curve >& FilletSurf_Builder::PCurveOnFace2 ( const Standard_Integer  Index) const

gives the PCurve associated to CurveOnSup2(Index) on the support face

void FilletSurf_Builder::Perform ( )

—Purpose computation of the fillet (list of NUBS)

void FilletSurf_Builder::Section ( const Standard_Integer  IndexSurf,
const Standard_Integer  IndexSec,
Handle< Geom_TrimmedCurve > &  Circ 
) const
void FilletSurf_Builder::Simulate ( )
FilletSurf_StatusType FilletSurf_Builder::StartSectionStatus ( ) const
FilletSurf_ErrorTypeStatus FilletSurf_Builder::StatusError ( ) const

gives informations about error status if IsDone=IsNotOk returns EdgeNotG1: the edges are not G1 FacesNotG1 : two connected faces on a same support are not G1 EdgeNotOnShape: the edge is not on shape NotSharpEdge: the edge is not sharp PbFilletCompute: problem during the computation of the fillet

const TopoDS_Face& FilletSurf_Builder::SupportFace1 ( const Standard_Integer  Index) const

gives the first support face relative to SurfaceFillet(Index);

const TopoDS_Face& FilletSurf_Builder::SupportFace2 ( const Standard_Integer  Index) const

gives the second support face relative to SurfaceFillet(Index);

const Handle< Geom_Surface >& FilletSurf_Builder::SurfaceFillet ( const Standard_Integer  Index) const

gives the NUBS surface of index Index.

Standard_Real FilletSurf_Builder::TolApp3d ( const Standard_Integer  Index) const

gives the 3d tolerance reached during approximation of surface of index Index


The documentation for this class was generated from the following file: