Reads IGES files, checks them and translates their contents into Open CASCADE models. The IGES data can be that of a whole model or that of a specific list of entities in the model. As in XSControl_Reader, you specify the list using a selection. For translation of iges files it is possible to use the following sequence: To change parameters of translation class Interface_Static should be used before the beginning of translation (see IGES Parameters and General Parameters) Creation of reader IGESControl_Reader reader; To load a file in a model use method: reader.ReadFile("filename.igs") To check a loading file use method Check: reader.Check(failsonly); where failsonly is equal to Standard_True or Standard_False; To print the results of load: reader.PrintCheckLoad(failsonly,mode) where mode is equal to the value of enumeration IFSelect_PrintCount To transfer entities from a model the following methods can be used: for the whole model reader.TransferRoots(onlyvisible); where onlyvisible is equal to Standard_True or Standard_False; To transfer a list of entities: reader.TransferList(list); To transfer one entity reader.TransferEntity(ent) or reader.Transfer(num); To obtain a result the following method can be used: reader.IsDone() reader.NbShapes() and reader.Shape(num); or reader.OneShape(); To print the results of transfer use method: reader.PrintTransferInfo(failwarn,mode); where printfail is equal to the value of enumeration IFSelect_PrintFail, mode see above. Gets correspondence between an IGES entity and a result shape obtained therefrom. reader.TransientProcess(); TopoDS_Shape shape = TransferBRep::ShapeResult(reader.TransientProcess(),ent);. More...
#include <IGESControl_Reader.hxx>
Public Member Functions | |
| IGESControl_Reader () | |
| Creates a Reader from scratch. More... | |
| IGESControl_Reader (const Handle< XSControl_WorkSession > &WS, const Standard_Boolean scratch=Standard_True) | |
| Creates a Reader from an already existing Session. More... | |
| void | SetReadVisible (const Standard_Boolean ReadRoot) |
| Set the transion of ALL Roots (if theReadOnlyVisible is False) or of Visible Roots (if theReadOnlyVisible is True) More... | |
| Standard_Boolean | GetReadVisible () const |
| Handle< IGESData_IGESModel > | IGESModel () const |
| Returns the model as a IGESModel. It can then be consulted (header, product) More... | |
| virtual Standard_Integer | NbRootsForTransfer () |
| Determines the list of root entities from Model which are candidate for a transfer to a Shape (type of entities is PRODUCT) <theReadOnlyVisible> is taken into account to define roots. More... | |
| void | PrintTransferInfo (const IFSelect_PrintFail failwarn, const IFSelect_PrintCount mode) const |
| Prints Statistics and check list for Transfer. More... | |
 Public Member Functions inherited from XSControl_Reader | |
| XSControl_Reader () | |
| Creates a Reader from scratch (creates an empty WorkSession) A WorkSession or a Controller must be provided before running. More... | |
| XSControl_Reader (const Standard_CString norm) | |
| Creates a Reader from scratch, with a norm name which identifies a Controller. More... | |
| XSControl_Reader (const Handle< XSControl_WorkSession > &WS, const Standard_Boolean scratch=Standard_True) | |
| Creates a Reader from an already existing Session, with a Controller already set Virtual destructor. More... | |
| virtual | ~XSControl_Reader () |
| Standard_Boolean | SetNorm (const Standard_CString norm) |
| Sets a specific norm to <me> Returns True if done, False if <norm> is not available. More... | |
| void | SetWS (const Handle< XSControl_WorkSession > &WS, const Standard_Boolean scratch=Standard_True) |
| Sets a specific session to <me> More... | |
| Handle< XSControl_WorkSession > | WS () const |
| Returns the session used in <me> More... | |
| IFSelect_ReturnStatus | ReadFile (const Standard_CString filename) |
| Loads a file and returns the read status Zero for a Model which compies with the Controller. More... | |
| Handle< Interface_InterfaceModel > | Model () const |
| Returns the model. It can then be consulted (header, product) More... | |
| Handle < TColStd_HSequenceOfTransient > | GiveList (const Standard_CString first="", const Standard_CString second="") |
| Returns a list of entities from the IGES or STEP file according to the following rules: More... | |
| Handle < TColStd_HSequenceOfTransient > | GiveList (const Standard_CString first, const Handle< Standard_Transient > &ent) |
| Computes a List of entities from the model as follows <first> beeing a Selection, <ent> beeing an entity or a list of entities (as a HSequenceOfTransient) : the standard result of this selection applied to this list if <first> is erroneous, a null handle is returned. More... | |
| Handle< Standard_Transient > | RootForTransfer (const Standard_Integer num=1) |
| Returns an IGES or STEP root entity for translation. The entity is identified by its rank in a list. More... | |
| Standard_Boolean | TransferOneRoot (const Standard_Integer num=1) |
| Translates a root identified by the rank num in the model. false is returned if no shape is produced. More... | |
| Standard_Boolean | TransferOne (const Standard_Integer num) |
| Translates an IGES or STEP entity identified by the rank num in the model. false is returned if no shape is produced. More... | |
| Standard_Boolean | TransferEntity (const Handle< Standard_Transient > &start) |
| Translates an IGES or STEP entity in the model. true is returned if a shape is produced; otherwise, false is returned. More... | |
| Standard_Integer | TransferList (const Handle< TColStd_HSequenceOfTransient > &list) |
| Translates a list of entities. Returns the number of IGES or STEP entities that were successfully translated. The list can be produced with GiveList. Warning - This function does not clear the existing output shapes. More... | |
| Standard_Integer | TransferRoots () |
| Translates all translatable roots and returns the number of successful translations. Warning - This function clears existing output shapes first. More... | |
| void | ClearShapes () |
| Clears the list of shapes that may have accumulated in calls to TransferOne or TransferRoot.C. More... | |
| Standard_Integer | NbShapes () const |
| Returns the number of shapes produced by translation. More... | |
| TopoDS_Shape | Shape (const Standard_Integer num=1) const |
| Returns the shape resulting from a translation and identified by the rank num. num equals 1 by default. In other words, the first shape resulting from the translation is returned. More... | |
| TopoDS_Shape | OneShape () const |
| Returns all of the results in a single shape which is: More... | |
| void | PrintCheckLoad (const Standard_Boolean failsonly, const IFSelect_PrintCount mode) const |
| Prints the check list attached to loaded data, on the Standard Trace File (starts at cout) All messages or fails only, according to <failsonly> mode = 0 : per entity, prints messages mode = 1 : per message, just gives count of entities per check mode = 2 : also gives entity numbers. More... | |
| void | PrintCheckTransfer (const Standard_Boolean failsonly, const IFSelect_PrintCount mode) const |
| Displays check results for the last translation of IGES or STEP entities to Open CASCADE entities. Only fail messages are displayed if failsonly is true. All messages are displayed if failsonly is false. mode determines the contents and the order of the messages according to the terms of the IFSelect_PrintCount enumeration. More... | |
| void | PrintStatsTransfer (const Standard_Integer what, const Standard_Integer mode=0) const |
| Displays the statistics for the last translation. what defines the kind of statistics that are displayed as follows: More... | |
| void | GetStatsTransfer (const Handle< TColStd_HSequenceOfTransient > &list, Standard_Integer &nbMapped, Standard_Integer &nbWithResult, Standard_Integer &nbWithFail) const |
| Gives statistics about Transfer. More... | |
Additional Inherited Members | |
| Protected Member Functions inherited from XSControl_Reader | |
| TopTools_SequenceOfShape & | Shapes () |
| Returns a sequence of produced shapes. More... | |
| Protected Attributes inherited from XSControl_Reader | |
| Standard_Boolean | therootsta |
| TColStd_SequenceOfTransient | theroots |
Detailed Description
Reads IGES files, checks them and translates their contents into Open CASCADE models. The IGES data can be that of a whole model or that of a specific list of entities in the model. As in XSControl_Reader, you specify the list using a selection. For translation of iges files it is possible to use the following sequence: To change parameters of translation class Interface_Static should be used before the beginning of translation (see IGES Parameters and General Parameters) Creation of reader IGESControl_Reader reader; To load a file in a model use method: reader.ReadFile("filename.igs") To check a loading file use method Check: reader.Check(failsonly); where failsonly is equal to Standard_True or Standard_False; To print the results of load: reader.PrintCheckLoad(failsonly,mode) where mode is equal to the value of enumeration IFSelect_PrintCount To transfer entities from a model the following methods can be used: for the whole model reader.TransferRoots(onlyvisible); where onlyvisible is equal to Standard_True or Standard_False; To transfer a list of entities: reader.TransferList(list); To transfer one entity reader.TransferEntity(ent) or reader.Transfer(num); To obtain a result the following method can be used: reader.IsDone() reader.NbShapes() and reader.Shape(num); or reader.OneShape(); To print the results of transfer use method: reader.PrintTransferInfo(failwarn,mode); where printfail is equal to the value of enumeration IFSelect_PrintFail, mode see above. Gets correspondence between an IGES entity and a result shape obtained therefrom. reader.TransientProcess(); TopoDS_Shape shape = TransferBRep::ShapeResult(reader.TransientProcess(),ent);.
Constructor & Destructor Documentation
| IGESControl_Reader::IGESControl_Reader | ( | ) |
Creates a Reader from scratch.
| IGESControl_Reader::IGESControl_Reader | ( | const Handle< XSControl_WorkSession > & | WS, |
| const Standard_Boolean | scratch = Standard_True |
||
| ) |
Creates a Reader from an already existing Session.
Member Function Documentation
| Standard_Boolean IGESControl_Reader::GetReadVisible | ( | ) | const |
| Handle< IGESData_IGESModel > IGESControl_Reader::IGESModel | ( | ) | const |
Returns the model as a IGESModel. It can then be consulted (header, product)
|
virtual |
Determines the list of root entities from Model which are candidate for a transfer to a Shape (type of entities is PRODUCT) <theReadOnlyVisible> is taken into account to define roots.
Reimplemented from XSControl_Reader.
| void IGESControl_Reader::PrintTransferInfo | ( | const IFSelect_PrintFail | failwarn, |
| const IFSelect_PrintCount | mode | ||
| ) | const |
Prints Statistics and check list for Transfer.
| void IGESControl_Reader::SetReadVisible | ( | const Standard_Boolean | ReadRoot | ) |
Set the transion of ALL Roots (if theReadOnlyVisible is False) or of Visible Roots (if theReadOnlyVisible is True)
The documentation for this class was generated from the following file:
