|
Open CASCADE Technology
6.9.0
|
This class implements an algorithm to determine the intersection between 2 parametrized surfaces, marching from a starting point. The intersection line starts and ends on the natural surface's boundaries . More...
#include <IntWalk_PWalking.hxx>
Public Member Functions | |
| IntWalk_PWalking (const Handle< Adaptor3d_HSurface > &Caro1, const Handle< Adaptor3d_HSurface > &Caro2, const Standard_Real TolTangency, const Standard_Real Epsilon, const Standard_Real Deflection, const Standard_Real Increment) | |
| Constructor used to set the data to compute intersection lines between Caro1 and Caro2. Deflection is the maximum deflection admitted between two consecutive points on the resulting polyline. TolTangency is the tolerance to find a tangent point. Func is the criterion which has to be evaluated at each solution point (each point of the line). It is necessary to call the Perform method to compute the intersection lines. The line found starts at a point on or in 2 natural domains of surfaces. It can be closed in the standard case if it is open it stops and begins at the border of one of the domains. If an open line stops at the middle of a domain, one stops at the tangent point. Epsilon is SquareTolerance of points confusion. More... | |
| IntWalk_PWalking (const Handle< Adaptor3d_HSurface > &Caro1, const Handle< Adaptor3d_HSurface > &Caro2, const Standard_Real TolTangency, const Standard_Real Epsilon, const Standard_Real Deflection, const Standard_Real Increment, const Standard_Real U1, const Standard_Real V1, const Standard_Real U2, const Standard_Real V2) | |
| Returns the intersection line containing the exact point Poin. This line is a polygonal line. Deflection is the maximum deflection admitted between two consecutive points on the resulting polyline. TolTangency is the tolerance to find a tangent point. Func is the criterion which has to be evaluated at each solution point (each point of the line). The line found starts at a point on or in 2 natural domains of surfaces. It can be closed in the standard case if it is open it stops and begins at the border of one of the domains. If an open line stops at the middle of a domain, one stops at the tangent point. Epsilon is SquareTolerance of points confusion. More... | |
| void | Perform (const TColStd_Array1OfReal &ParDep) |
| calculate the line of intersection More... | |
| void | Perform (const TColStd_Array1OfReal &ParDep, const Standard_Real u1min, const Standard_Real v1min, const Standard_Real u2min, const Standard_Real v2min, const Standard_Real u1max, const Standard_Real v1max, const Standard_Real u2max, const Standard_Real v2max) |
| calculate the line of intersection. The regulation of steps is done using min and max values on u and v. (if this data is not presented as in the previous method, the initial steps are calculated starting from min and max uv of faces). More... | |
| Standard_Boolean | PerformFirstPoint (const TColStd_Array1OfReal &ParDep, IntSurf_PntOn2S &FirstPoint) |
| calculate the first point of a line of intersection More... | |
| Standard_Boolean | IsDone () const |
| Returns true if the calculus was successful. More... | |
| Standard_Integer | NbPoints () const |
| Returns the number of points of the resulting polyline. An exception is raised if IsDone returns False. More... | |
| const IntSurf_PntOn2S & | Value (const Standard_Integer Index) const |
| Returns the point of range Index on the polyline. An exception is raised if IsDone returns False. An exception is raised if Index<=0 or Index>NbPoints. More... | |
| const Handle< IntSurf_LineOn2S > & | Line () const |
| Standard_Boolean | TangentAtFirst () const |
| Returns True if the surface are tangent at the first point of the line. An exception is raised if IsDone returns False. More... | |
| Standard_Boolean | TangentAtLast () const |
| Returns true if the surface are tangent at the last point of the line. An exception is raised if IsDone returns False. More... | |
| Standard_Boolean | IsClosed () const |
| Returns True if the line is closed. An exception is raised if IsDone returns False. More... | |
| const gp_Dir & | TangentAtLine (Standard_Integer &Index) const |
| IntWalk_StatusDeflection | TestDeflection () |
| Standard_Boolean | TestArret (const Standard_Boolean DejaReparti, TColStd_Array1OfReal &Param, IntImp_ConstIsoparametric &ChoixIso) |
| void | RepartirOuDiviser (Standard_Boolean &DejaReparti, IntImp_ConstIsoparametric &ChoixIso, Standard_Boolean &Arrive) |
| void | AddAPoint (Handle< IntSurf_LineOn2S > &line, const IntSurf_PntOn2S &POn2S) |
| Standard_Boolean | PutToBoundary (const Handle< Adaptor3d_HSurface > &theASurf1, const Handle< Adaptor3d_HSurface > &theASurf2) |
| Standard_Boolean | SeekAdditionalPoints (const Handle< Adaptor3d_HSurface > &theASurf1, const Handle< Adaptor3d_HSurface > &theASurf2, const Standard_Integer theMinNbPoints) |
This class implements an algorithm to determine the intersection between 2 parametrized surfaces, marching from a starting point. The intersection line starts and ends on the natural surface's boundaries .
| IntWalk_PWalking::IntWalk_PWalking | ( | const Handle< Adaptor3d_HSurface > & | Caro1, |
| const Handle< Adaptor3d_HSurface > & | Caro2, | ||
| const Standard_Real | TolTangency, | ||
| const Standard_Real | Epsilon, | ||
| const Standard_Real | Deflection, | ||
| const Standard_Real | Increment | ||
| ) |
Constructor used to set the data to compute intersection lines between Caro1 and Caro2. Deflection is the maximum deflection admitted between two consecutive points on the resulting polyline. TolTangency is the tolerance to find a tangent point. Func is the criterion which has to be evaluated at each solution point (each point of the line). It is necessary to call the Perform method to compute the intersection lines. The line found starts at a point on or in 2 natural domains of surfaces. It can be closed in the standard case if it is open it stops and begins at the border of one of the domains. If an open line stops at the middle of a domain, one stops at the tangent point. Epsilon is SquareTolerance of points confusion.
| IntWalk_PWalking::IntWalk_PWalking | ( | const Handle< Adaptor3d_HSurface > & | Caro1, |
| const Handle< Adaptor3d_HSurface > & | Caro2, | ||
| const Standard_Real | TolTangency, | ||
| const Standard_Real | Epsilon, | ||
| const Standard_Real | Deflection, | ||
| const Standard_Real | Increment, | ||
| const Standard_Real | U1, | ||
| const Standard_Real | V1, | ||
| const Standard_Real | U2, | ||
| const Standard_Real | V2 | ||
| ) |
Returns the intersection line containing the exact point Poin. This line is a polygonal line. Deflection is the maximum deflection admitted between two consecutive points on the resulting polyline. TolTangency is the tolerance to find a tangent point. Func is the criterion which has to be evaluated at each solution point (each point of the line). The line found starts at a point on or in 2 natural domains of surfaces. It can be closed in the standard case if it is open it stops and begins at the border of one of the domains. If an open line stops at the middle of a domain, one stops at the tangent point. Epsilon is SquareTolerance of points confusion.
| void IntWalk_PWalking::AddAPoint | ( | Handle< IntSurf_LineOn2S > & | line, |
| const IntSurf_PntOn2S & | POn2S | ||
| ) |
| Standard_Boolean IntWalk_PWalking::IsClosed | ( | ) | const |
Returns True if the line is closed. An exception is raised if IsDone returns False.
| Standard_Boolean IntWalk_PWalking::IsDone | ( | ) | const |
Returns true if the calculus was successful.
| const Handle< IntSurf_LineOn2S >& IntWalk_PWalking::Line | ( | ) | const |
| Standard_Integer IntWalk_PWalking::NbPoints | ( | ) | const |
Returns the number of points of the resulting polyline. An exception is raised if IsDone returns False.
| void IntWalk_PWalking::Perform | ( | const TColStd_Array1OfReal & | ParDep | ) |
calculate the line of intersection
| void IntWalk_PWalking::Perform | ( | const TColStd_Array1OfReal & | ParDep, |
| const Standard_Real | u1min, | ||
| const Standard_Real | v1min, | ||
| const Standard_Real | u2min, | ||
| const Standard_Real | v2min, | ||
| const Standard_Real | u1max, | ||
| const Standard_Real | v1max, | ||
| const Standard_Real | u2max, | ||
| const Standard_Real | v2max | ||
| ) |
calculate the line of intersection. The regulation of steps is done using min and max values on u and v. (if this data is not presented as in the previous method, the initial steps are calculated starting from min and max uv of faces).
| Standard_Boolean IntWalk_PWalking::PerformFirstPoint | ( | const TColStd_Array1OfReal & | ParDep, |
| IntSurf_PntOn2S & | FirstPoint | ||
| ) |
calculate the first point of a line of intersection
| Standard_Boolean IntWalk_PWalking::PutToBoundary | ( | const Handle< Adaptor3d_HSurface > & | theASurf1, |
| const Handle< Adaptor3d_HSurface > & | theASurf2 | ||
| ) |
| void IntWalk_PWalking::RepartirOuDiviser | ( | Standard_Boolean & | DejaReparti, |
| IntImp_ConstIsoparametric & | ChoixIso, | ||
| Standard_Boolean & | Arrive | ||
| ) |
| Standard_Boolean IntWalk_PWalking::SeekAdditionalPoints | ( | const Handle< Adaptor3d_HSurface > & | theASurf1, |
| const Handle< Adaptor3d_HSurface > & | theASurf2, | ||
| const Standard_Integer | theMinNbPoints | ||
| ) |
| Standard_Boolean IntWalk_PWalking::TangentAtFirst | ( | ) | const |
Returns True if the surface are tangent at the first point of the line. An exception is raised if IsDone returns False.
| Standard_Boolean IntWalk_PWalking::TangentAtLast | ( | ) | const |
Returns true if the surface are tangent at the last point of the line. An exception is raised if IsDone returns False.
| const gp_Dir& IntWalk_PWalking::TangentAtLine | ( | Standard_Integer & | Index | ) | const |
| Standard_Boolean IntWalk_PWalking::TestArret | ( | const Standard_Boolean | DejaReparti, |
| TColStd_Array1OfReal & | Param, | ||
| IntImp_ConstIsoparametric & | ChoixIso | ||
| ) |
| IntWalk_StatusDeflection IntWalk_PWalking::TestDeflection | ( | ) |
| const IntSurf_PntOn2S& IntWalk_PWalking::Value | ( | const Standard_Integer | Index | ) | const |
Returns the point of range Index on the polyline. An exception is raised if IsDone returns False. An exception is raised if Index<=0 or Index>NbPoints.
1.8.5