#include <Poly_CoherentNode.hxx>

Inheritance diagram for Poly_CoherentNode:

Public Member Functions
	Poly_CoherentNode ()

	Poly_CoherentNode (const gp_XYZ &thePnt)

void	SetUV (const Standard_Real theU, const Standard_Real theV)

Standard_Real	GetU () const

Standard_Real	GetV () const

void	SetNormal (const gp_XYZ &theVector)

Standard_Boolean	HasNormal () const

gp_XYZ	GetNormal () const

void	SetIndex (const Standard_Integer theIndex)

Standard_Integer	GetIndex () const

Standard_Boolean	IsFreeNode () const

void	Clear (const Handle< NCollection_BaseAllocator > &)

void	AddTriangle (const Poly_CoherentTriangle &theTri, const Handle< NCollection_BaseAllocator > &theA)

Standard_Boolean	RemoveTriangle (const Poly_CoherentTriangle &theTri, const Handle< NCollection_BaseAllocator > &theA)

Poly_CoherentTriPtr::Iterator	TriangleIterator () const

void	Dump (Standard_OStream &theStream) const

Public Member Functions inherited from gp_XYZ
	gp_XYZ ()
	Creates an XYZ object with zero co-ordinates (0,0,0) More...

	gp_XYZ (const Standard_Real X, const Standard_Real Y, const Standard_Real Z)
	creates an XYZ with given coordinates More...

void	SetCoord (const Standard_Real X, const Standard_Real Y, const Standard_Real Z)
	For this XYZ object, assigns the values X, Y and Z to its three coordinates. More...

void	SetCoord (const Standard_Integer Index, const Standard_Real Xi)
	modifies the coordinate of range Index Index = 1 => X is modified Index = 2 => Y is modified Index = 3 => Z is modified Raises OutOfRange if Index != {1, 2, 3}. More...

void	SetX (const Standard_Real X)
	Assigns the given value to the X coordinate. More...

void	SetY (const Standard_Real Y)
	Assigns the given value to the Y coordinate. More...

void	SetZ (const Standard_Real Z)
	Assigns the given value to the Z coordinate. More...

Standard_Real	Coord (const Standard_Integer Index) const
	returns the coordinate of range Index : Index = 1 => X is returned Index = 2 => Y is returned Index = 3 => Z is returned More...

Standard_Real &	ChangeCoord (const Standard_Integer theIndex)

void	Coord (Standard_Real &X, Standard_Real &Y, Standard_Real &Z) const

Standard_Real	X () const
	Returns the X coordinate. More...

Standard_Real	Y () const
	Returns the Y coordinate. More...

Standard_Real	Z () const
	Returns the Z coordinate. More...

Standard_Real	Modulus () const
	computes Sqrt (XX + YY + Z*Z) where X, Y and Z are the three coordinates of this XYZ object. More...

Standard_Real	SquareModulus () const
	Computes XX + YY + Z*Z where X, Y and Z are the three coordinates of this XYZ object. More...

Standard_Boolean	IsEqual (const gp_XYZ &Other, const Standard_Real Tolerance) const
	Returns True if he coordinates of this XYZ object are equal to the respective coordinates Other, within the specified tolerance Tolerance. I.e.: abs(<me>.X() - Other.X()) <= Tolerance and abs(<me>.Y() - Other.Y()) <= Tolerance and abs(<me>.Z() - Other.Z()) <= Tolerance. More...

void	Add (const gp_XYZ &Other)
	<me>.X() = <me>.X() + Other.X() <me>.Y() = <me>.Y() + Other.Y() <me>.Z() = <me>.Z() + Other.Z() More...

void	operator+= (const gp_XYZ &Other)

gp_XYZ	Added (const gp_XYZ &Other) const
	new.X() = <me>.X() + Other.X() new.Y() = <me>.Y() + Other.Y() new.Z() = <me>.Z() + Other.Z() More...

gp_XYZ	operator+ (const gp_XYZ &Other) const

void	Cross (const gp_XYZ &Right)
	<me>.X() = <me>.Y() * Other.Z() - <me>.Z() * Other.Y() <me>.Y() = <me>.Z() * Other.X() - <me>.X() * Other.Z() <me>.Z() = <me>.X() * Other.Y() - <me>.Y() * Other.X() More...

void	operator^= (const gp_XYZ &Right)

gp_XYZ	Crossed (const gp_XYZ &Right) const
	new.X() = <me>.Y() * Other.Z() - <me>.Z() * Other.Y() new.Y() = <me>.Z() * Other.X() - <me>.X() * Other.Z() new.Z() = <me>.X() * Other.Y() - <me>.Y() * Other.X() More...

gp_XYZ	operator^ (const gp_XYZ &Right) const

Standard_Real	CrossMagnitude (const gp_XYZ &Right) const
	Computes the magnitude of the cross product between <me> and Right. Returns \|\| <me> ^ Right \|\|. More...

Standard_Real	CrossSquareMagnitude (const gp_XYZ &Right) const
	Computes the square magnitude of the cross product between <me> and Right. Returns \|\| <me> ^ Right \|\|**2. More...

void	CrossCross (const gp_XYZ &Coord1, const gp_XYZ &Coord2)
	Triple vector product Computes <me> = <me>.Cross(Coord1.Cross(Coord2)) More...

gp_XYZ	CrossCrossed (const gp_XYZ &Coord1, const gp_XYZ &Coord2) const
	Triple vector product computes New = <me>.Cross(Coord1.Cross(Coord2)) More...

void	Divide (const Standard_Real Scalar)
	divides <me> by a real. More...

void	operator/= (const Standard_Real Scalar)

gp_XYZ	Divided (const Standard_Real Scalar) const
	divides <me> by a real. More...

gp_XYZ	operator/ (const Standard_Real Scalar) const

Standard_Real	Dot (const gp_XYZ &Other) const
	computes the scalar product between <me> and Other More...

Standard_Real	operator* (const gp_XYZ &Other) const

Standard_Real	DotCross (const gp_XYZ &Coord1, const gp_XYZ &Coord2) const
	computes the triple scalar product More...

void	Multiply (const Standard_Real Scalar)
	<me>.X() = <me>.X() * Scalar; <me>.Y() = <me>.Y() * Scalar; <me>.Z() = <me>.Z() * Scalar; More...

void	operator*= (const Standard_Real Scalar)

void	Multiply (const gp_XYZ &Other)
	<me>.X() = <me>.X() * Other.X(); <me>.Y() = <me>.Y() * Other.Y(); <me>.Z() = <me>.Z() * Other.Z(); More...

void	operator*= (const gp_XYZ &Other)

void	Multiply (const gp_Mat &Matrix)
	<me> = Matrix * <me> More...

void	operator*= (const gp_Mat &Matrix)

gp_XYZ	Multiplied (const Standard_Real Scalar) const
	New.X() = <me>.X() * Scalar; New.Y() = <me>.Y() * Scalar; New.Z() = <me>.Z() * Scalar;. More...

gp_XYZ	operator* (const Standard_Real Scalar) const

gp_XYZ	Multiplied (const gp_XYZ &Other) const
	new.X() = <me>.X() * Other.X(); new.Y() = <me>.Y() * Other.Y(); new.Z() = <me>.Z() * Other.Z(); More...

gp_XYZ	Multiplied (const gp_Mat &Matrix) const
	New = Matrix * <me> More...

gp_XYZ	operator* (const gp_Mat &Matrix) const

void	Normalize ()
	<me>.X() = <me>.X()/ <me>.Modulus() <me>.Y() = <me>.Y()/ <me>.Modulus() <me>.Z() = <me>.Z()/ <me>.Modulus() Raised if <me>.Modulus() <= Resolution from gp More...

gp_XYZ	Normalized () const
	New.X() = <me>.X()/ <me>.Modulus() New.Y() = <me>.Y()/ <me>.Modulus() New.Z() = <me>.Z()/ <me>.Modulus() Raised if <me>.Modulus() <= Resolution from gp. More...

void	Reverse ()
	<me>.X() = -<me>.X() <me>.Y() = -<me>.Y() <me>.Z() = -<me>.Z() More...

gp_XYZ	Reversed () const
	New.X() = -<me>.X() New.Y() = -<me>.Y() New.Z() = -<me>.Z() More...

void	Subtract (const gp_XYZ &Right)
	<me>.X() = <me>.X() - Other.X() <me>.Y() = <me>.Y() - Other.Y() <me>.Z() = <me>.Z() - Other.Z() More...

void	operator-= (const gp_XYZ &Right)

gp_XYZ	Subtracted (const gp_XYZ &Right) const
	new.X() = <me>.X() - Other.X() new.Y() = <me>.Y() - Other.Y() new.Z() = <me>.Z() - Other.Z() More...

gp_XYZ	operator- (const gp_XYZ &Right) const

void	SetLinearForm (const Standard_Real A1, const gp_XYZ &XYZ1, const Standard_Real A2, const gp_XYZ &XYZ2, const Standard_Real A3, const gp_XYZ &XYZ3, const gp_XYZ &XYZ4)
	<me> is set to the following linear form : A1 * XYZ1 + A2 * XYZ2 + A3 * XYZ3 + XYZ4 More...

void	SetLinearForm (const Standard_Real A1, const gp_XYZ &XYZ1, const Standard_Real A2, const gp_XYZ &XYZ2, const Standard_Real A3, const gp_XYZ &XYZ3)
	<me> is set to the following linear form : A1 * XYZ1 + A2 * XYZ2 + A3 * XYZ3 More...

void	SetLinearForm (const Standard_Real A1, const gp_XYZ &XYZ1, const Standard_Real A2, const gp_XYZ &XYZ2, const gp_XYZ &XYZ3)
	<me> is set to the following linear form : A1 * XYZ1 + A2 * XYZ2 + XYZ3 More...

void	SetLinearForm (const Standard_Real A1, const gp_XYZ &XYZ1, const Standard_Real A2, const gp_XYZ &XYZ2)
	<me> is set to the following linear form : A1 * XYZ1 + A2 * XYZ2 More...

void	SetLinearForm (const Standard_Real A1, const gp_XYZ &XYZ1, const gp_XYZ &XYZ2)
	<me> is set to the following linear form : A1 * XYZ1 + XYZ2 More...

void	SetLinearForm (const gp_XYZ &XYZ1, const gp_XYZ &XYZ2)
	<me> is set to the following linear form : XYZ1 + XYZ2 More...

Standard_Real	_CSFDB_Getgp_XYZx () const

void	_CSFDB_Setgp_XYZx (const Standard_Real p)

Standard_Real	_CSFDB_Getgp_XYZy () const

void	_CSFDB_Setgp_XYZy (const Standard_Real p)

Standard_Real	_CSFDB_Getgp_XYZz () const

void	_CSFDB_Setgp_XYZz (const Standard_Real p)

Detailed Description

Node of coherent triangulation. Contains:

Coordinates of a 3D point defining the node location
2D point coordinates
List of triangles that use this Node
Integer index, normally the index of the node in the original triangulation

Constructor & Destructor Documentation

Poly_CoherentNode::Poly_CoherentNode ( )

inline

Empty constructor.

Poly_CoherentNode::Poly_CoherentNode ( const gp_XYZ & thePnt )

inline

Constructor.

Member Function Documentation

void Poly_CoherentNode::AddTriangle	(	const Poly_CoherentTriangle &	theTri,
		const Handle< NCollection_BaseAllocator > &	theA
	)

Connect a triangle to this Node.

void Poly_CoherentNode::Clear ( const Handle< NCollection_BaseAllocator > & )

Reset the Node to void.

void Poly_CoherentNode::Dump ( Standard_OStream & theStream ) const

Standard_Integer Poly_CoherentNode::GetIndex ( ) const

inline

Get the value of node Index.

gp_XYZ Poly_CoherentNode::GetNormal ( ) const

inline

Get the stored normal in the node.

Standard_Real Poly_CoherentNode::GetU ( ) const

inline

Get U coordinate of the Node.

Standard_Real Poly_CoherentNode::GetV ( ) const

inline

Get V coordinate of the Node.

Standard_Boolean Poly_CoherentNode::HasNormal ( ) const

inline

Query if the Node contains a normal vector.

Standard_Boolean Poly_CoherentNode::IsFreeNode ( ) const

inline

Check if this is a free node, i.e., a node without a single incident triangle.

Standard_Boolean Poly_CoherentNode::RemoveTriangle	(	const Poly_CoherentTriangle &	theTri,
		const Handle< NCollection_BaseAllocator > &	theA
	)

Disconnect a triangle from this Node.

void Poly_CoherentNode::SetIndex ( const Standard_Integer theIndex )

inline

Set the value of node Index.

void Poly_CoherentNode::SetNormal ( const gp_XYZ & theVector )

Define the normal vector in the Node.

void Poly_CoherentNode::SetUV	(	const Standard_Real	theU,
		const Standard_Real	theV
	)

inline

Set the UV coordinates of the Node.

Poly_CoherentTriPtr::Iterator Poly_CoherentNode::TriangleIterator ( ) const

inline

Create an iterator of incident triangles.

The documentation for this class was generated from the following file:

Poly_CoherentNode.hxx

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation