Provides general functions to build form features. Form features can be depressions or protrusions and include the following types: More...

#include <BRepFeat_Form.hxx>

Inheritance diagram for BRepFeat_Form:

[legend]

Public Member Functions
virtual const TopTools_ListOfShape &	Modified (const TopoDS_Shape &F)
	returns the list of generated Faces. More...

virtual const TopTools_ListOfShape &	Generated (const TopoDS_Shape &S)
	returns a list of the created faces from the shape <S>. More...

virtual Standard_Boolean	IsDeleted (const TopoDS_Shape &S)
	Returns true if the shape S has been deleted. More...

const TopTools_ListOfShape &	FirstShape () const
	Returns the list of shapes created at the bottom of the created form. It may be an empty list. More...

const TopTools_ListOfShape &	LastShape () const
	Returns the list of shapes created at the top of the created form. It may be an empty list. More...

const TopTools_ListOfShape &	NewEdges () const
	Returns a list of the limiting and glueing edges generated by the feature. These edges did not originally exist in the basis shape. The list provides the information necessary for subsequent addition of fillets. It may be an empty list. More...

const TopTools_ListOfShape &	TgtEdges () const
	Returns a list of the tangent edges among the limiting and glueing edges generated by the feature. These edges did not originally exist in the basis shape and are tangent to the face against which the feature is built. The list provides the information necessary for subsequent addition of fillets. It may be an empty list. If an edge is tangent, no fillet is possible, and the edge must subsequently be removed if you want to add a fillet. More...

void	BasisShapeValid ()
	Initializes the topological construction if the basis shape is present. More...

void	GeneratedShapeValid ()
	Initializes the topological construction if the generated shape S is present. More...

void	ShapeFromValid ()
	Initializes the topological construction if the shape is present from the specified integer on. More...

void	ShapeUntilValid ()
	Initializes the topological construction if the shape is present until the specified integer. More...

void	GluedFacesValid ()
	Initializes the topological construction if the glued face is present. More...

void	SketchFaceValid ()
	Initializes the topological construction if the sketch face is present. If the sketch face is inside the basis shape, local operations such as glueing can be performed. More...

void	PerfSelectionValid ()
	Initializes the topological construction if the selected face is present. More...

virtual void	Curves (TColGeom_SequenceOfCurve &S)=0

virtual Handle< Geom_Curve >	BarycCurve ()=0

BRepFeat_StatusError	CurrentStatusError () const

Public Member Functions inherited from BRepBuilderAPI_MakeShape
virtual void	Delete ()

virtual	~BRepBuilderAPI_MakeShape ()

virtual void	Build ()
	This is called by Shape(). It does nothing but may be redefined. More...

virtual const TopoDS_Shape &	Shape () const
	Returns a shape built by the shape construction algorithm. Raises exception StdFail_NotDone if the shape was not built. More...

	operator TopoDS_Shape () const

Public Member Functions inherited from BRepBuilderAPI_Command
virtual	~BRepBuilderAPI_Command ()

virtual Standard_Boolean	IsDone () const

void	Check () const
	Raises NotDone if done is false. More...

Protected Member Functions
	BRepFeat_Form ()
	Redefines the empty constructor. More...

void	GlobalPerform ()
	General perform method... More...

void	UpdateDescendants (const LocOpe_Gluer &G)

void	UpdateDescendants (const BRepAlgoAPI_BooleanOperation &aBOP, const TopoDS_Shape &SResult, const Standard_Boolean SkipFace=Standard_False)

void	UpdateDescendants (const Handle< TopOpeBRepBuild_HBuilder > &B, const TopoDS_Shape &SResult, const Standard_Boolean SkipFace=Standard_False)

Standard_Boolean	TransformShapeFU (const Standard_Integer flag)

Protected Member Functions inherited from BRepBuilderAPI_MakeShape
	BRepBuilderAPI_MakeShape ()

Protected Member Functions inherited from BRepBuilderAPI_Command
	BRepBuilderAPI_Command ()
	Set done to False. More...

void	Done ()
	Set done to true. More...

void	NotDone ()
	Set done to false. More...

Detailed Description

Provides general functions to build form features. Form features can be depressions or protrusions and include the following types:

Cylinder
Draft Prism
Prism
Revolved feature
Pipe In each case, you have a choice of operation type between the following:
removing matter (a Boolean cut: Fuse setting 0)
adding matter (Boolean fusion: Fuse setting 1) The semantics of form feature creation is based on the construction of shapes:
along a length
up to a limiting face
from a limiting face to a height
above and/or below a plane The shape defining construction of the feature can be either the supporting edge or the concerned area of a face. In case of the supporting edge, this contour can be attached to a face of the basis shape by binding. When the contour is bound to this face, the information that the contour will slide on the face becomes available to the relevant class methods. In case of the concerned area of a face, you could, for example, cut it out and move it to a different height which will define the limiting face of a protrusion or depression. Topological definition with local operations of this sort makes calculations simpler and faster than a global operation. The latter would entail a second phase of removing unwanted matter to get the same result.

Constructor & Destructor Documentation

BRepFeat_Form::BRepFeat_Form ( )

protected

Redefines the empty constructor.

Member Function Documentation

virtual Handle< Geom_Curve > BRepFeat_Form::BarycCurve ( )

pure virtual

Implemented in BRepFeat_MakePrism, BRepFeat_MakeDPrism, BRepFeat_MakePipe, and BRepFeat_MakeRevol.

void BRepFeat_Form::BasisShapeValid ( )

Initializes the topological construction if the basis shape is present.

BRepFeat_StatusError BRepFeat_Form::CurrentStatusError ( ) const

virtual void BRepFeat_Form::Curves ( TColGeom_SequenceOfCurve & S )

pure virtual

Implemented in BRepFeat_MakePrism, BRepFeat_MakeDPrism, BRepFeat_MakePipe, and BRepFeat_MakeRevol.

const TopTools_ListOfShape& BRepFeat_Form::FirstShape ( ) const

Returns the list of shapes created at the bottom of the created form. It may be an empty list.

virtual const TopTools_ListOfShape& BRepFeat_Form::Generated ( const TopoDS_Shape & S )

virtual

returns a list of the created faces from the shape <S>.

Reimplemented from BRepBuilderAPI_MakeShape.

void BRepFeat_Form::GeneratedShapeValid ( )

Initializes the topological construction if the generated shape S is present.

void BRepFeat_Form::GlobalPerform ( )

protected

General perform method...

void BRepFeat_Form::GluedFacesValid ( )

Initializes the topological construction if the glued face is present.

virtual Standard_Boolean BRepFeat_Form::IsDeleted ( const TopoDS_Shape & S )

virtual

Returns true if the shape S has been deleted.

Reimplemented from BRepBuilderAPI_MakeShape.

const TopTools_ListOfShape& BRepFeat_Form::LastShape ( ) const

Returns the list of shapes created at the top of the created form. It may be an empty list.

virtual const TopTools_ListOfShape& BRepFeat_Form::Modified ( const TopoDS_Shape & F )

virtual

returns the list of generated Faces.

Reimplemented from BRepBuilderAPI_MakeShape.

const TopTools_ListOfShape& BRepFeat_Form::NewEdges ( ) const

Returns a list of the limiting and glueing edges generated by the feature. These edges did not originally exist in the basis shape. The list provides the information necessary for subsequent addition of fillets. It may be an empty list.

void BRepFeat_Form::PerfSelectionValid ( )

Initializes the topological construction if the selected face is present.

void BRepFeat_Form::ShapeFromValid ( )

Initializes the topological construction if the shape is present from the specified integer on.

void BRepFeat_Form::ShapeUntilValid ( )

Initializes the topological construction if the shape is present until the specified integer.

void BRepFeat_Form::SketchFaceValid ( )

Initializes the topological construction if the sketch face is present. If the sketch face is inside the basis shape, local operations such as glueing can be performed.

const TopTools_ListOfShape& BRepFeat_Form::TgtEdges ( ) const

Returns a list of the tangent edges among the limiting and glueing edges generated by the feature. These edges did not originally exist in the basis shape and are tangent to the face against which the feature is built. The list provides the information necessary for subsequent addition of fillets. It may be an empty list. If an edge is tangent, no fillet is possible, and the edge must subsequently be removed if you want to add a fillet.

Standard_Boolean BRepFeat_Form::TransformShapeFU ( const Standard_Integer flag )

protected

void BRepFeat_Form::UpdateDescendants ( const LocOpe_Gluer & G )

protected

void BRepFeat_Form::UpdateDescendants	(	const BRepAlgoAPI_BooleanOperation &	aBOP,
		const TopoDS_Shape &	SResult,
		const Standard_Boolean	SkipFace = `Standard_False`
	)

protected

void BRepFeat_Form::UpdateDescendants	(	const Handle< TopOpeBRepBuild_HBuilder > &	B,
		const TopoDS_Shape &	SResult,
		const Standard_Boolean	SkipFace = `Standard_False`
	)

protected

Field Documentation

TopoDS_Shape BRepFeat_Form::myFShape

protected

Standard_Boolean BRepFeat_Form::myFuse

protected

TopTools_DataMapOfShapeShape BRepFeat_Form::myGluedF

protected

TopoDS_Shape BRepFeat_Form::myGShape

protected

Standard_Boolean BRepFeat_Form::myJustFeat

protected

Standard_Boolean BRepFeat_Form::myJustGluer

protected

TopoDS_Shape BRepFeat_Form::myLShape

protected

TopTools_DataMapOfShapeListOfShape BRepFeat_Form::myMap

protected

Standard_Boolean BRepFeat_Form::myModify

protected

TopTools_ListOfShape BRepFeat_Form::myNewEdges

protected

BRepFeat_PerfSelection BRepFeat_Form::myPerfSelection

protected

TopoDS_Shape BRepFeat_Form::mySbase

protected

TopoDS_Shape BRepFeat_Form::mySFrom

protected

TopoDS_Face BRepFeat_Form::mySkface

protected

TopoDS_Shape BRepFeat_Form::mySUntil

protected

TopTools_ListOfShape BRepFeat_Form::myTgtEdges

protected

The documentation for this class was generated from the following file:

BRepFeat_Form.hxx

Protected Attributes
Standard_Boolean	myFuse

Standard_Boolean	myModify

TopTools_DataMapOfShapeListOfShape	myMap

TopoDS_Shape	myFShape

TopoDS_Shape	myLShape

TopTools_ListOfShape	myNewEdges

TopTools_ListOfShape	myTgtEdges

BRepFeat_PerfSelection	myPerfSelection

Standard_Boolean	myJustGluer

Standard_Boolean	myJustFeat

TopoDS_Shape	mySbase

TopoDS_Face	mySkface

TopoDS_Shape	myGShape

TopoDS_Shape	mySFrom

TopoDS_Shape	mySUntil

TopTools_DataMapOfShapeShape	myGluedF

Protected Attributes inherited from BRepBuilderAPI_MakeShape
TopoDS_Shape	myShape

TopTools_ListOfShape	myGenerated

Public Member Functions

Protected Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Field Documentation