Rebuilds a Shape by making pre-defined substitutions on some of its components. More...

#include <BRepTools_ReShape.hxx>

Inheritance diagram for BRepTools_ReShape:

Public Member Functions
	BRepTools_ReShape ()
	Returns an empty Reshape. More...

virtual void	Clear ()
	Clears all substitutions requests. More...

virtual void	Remove (const TopoDS_Shape &shape, const Standard_Boolean oriented=Standard_False)
	Sets a request to Remove a Shape If <oriented> is True, only for a shape with the SAME orientation. Else, whatever the orientation. More...

virtual void	Replace (const TopoDS_Shape &shape, const TopoDS_Shape &newshape, const Standard_Boolean oriented=Standard_False)
	Sets a request to Replace a Shape by a new one If <oriented> is True, only if the orientation is the same Else, whatever the orientation, and the new shape takes the same orientation as <newshape> if the replaced one has the same as <shape>, else it is reversed. More...

virtual Standard_Boolean	IsRecorded (const TopoDS_Shape &shape) const
	Tells if a shape is recorded for Replace/Remove. More...

virtual TopoDS_Shape	Value (const TopoDS_Shape &shape) const
	Returns the new value for an individual shape If not recorded, returns the original shape itself If to be Removed, returns a Null Shape Else, returns the replacing item. More...

virtual Standard_Integer	Status (const TopoDS_Shape &shape, TopoDS_Shape &newsh, const Standard_Boolean last=Standard_False)
	Returns a complete substitution status for a shape 0 : not recorded, <newsh> = original <shape> < 0: to be removed, <newsh> is NULL 0: to be replaced, <newsh> is a new item If <last> is False, returns status and new shape recorded in the map directly for the shape, if True and status > 0 then recursively searches for the last status and new shape. More...

virtual TopoDS_Shape	Apply (const TopoDS_Shape &shape, const TopAbs_ShapeEnum until, const Standard_Integer buildmode)
	Applies the substitutions requests to a shape. More...

virtual TopoDS_Shape	Apply (const TopoDS_Shape &shape, const TopAbs_ShapeEnum until=TopAbs_SHAPE)
	Applies the substitutions requests to a shape. More...

virtual Standard_Boolean &	ModeConsiderLocation ()
	Returns (modifiable) the flag which defines whether Location of shape take into account during replacing shapes. More...

virtual Standard_Boolean &	ModeConsiderOrientation ()
	Returns (modifiable) the flag which defines whether Orientation of shape take into account during replacing shapes. More...

Public Member Functions inherited from MMgt_TShared
virtual void	Delete () const
	Memory deallocator for transient classes. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual const Handle_Standard_Type &	DynamicType () const
	Returns a type information object about this object. More...

Standard_Boolean	IsInstance (const Handle_Standard_Type &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const Handle_Standard_Type &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

virtual Handle_Standard_Transient	This () const
	Returns a Handle which references this object. Must never be called to objects created in stack. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

Protected Attributes
TopTools_DataMapOfShapeShape	myNMap

TopTools_DataMapOfShapeShape	myRMap

Standard_Integer	myStatus

Detailed Description

Rebuilds a Shape by making pre-defined substitutions on some of its components.

In a first phase, it records requests to replace or remove some individual shapes For each shape, the last given request is recorded Requests may be applied "Oriented" (i.e. only to an item with the SAME orientation) or not (the orientation of replacing shape is respectful of that of the original one)

Then, these requests may be applied to any shape which may contain one or more of these individual shapes

Constructor & Destructor Documentation

BRepTools_ReShape::BRepTools_ReShape ( )

Returns an empty Reshape.

Member Function Documentation

virtual TopoDS_Shape BRepTools_ReShape::Apply	(	const TopoDS_Shape &	shape,
		const TopAbs_ShapeEnum	until,
		const Standard_Integer	buildmode
	)

virtual

Applies the substitutions requests to a shape.

<until> gives the level of type until which requests are taken into account. For subshapes of the type <until> no rebuild and futher exploring are done. ACTUALLY, NOT IMPLEMENTED BELOW TopAbs_FACE

<buildmode> says how to do on a SOLID,SHELL ... if one of its sub-shapes has been changed: 0: at least one Replace or Remove -> COMPOUND, else as such 1: at least one Remove (Replace are ignored) -> COMPOUND 2: Replace and Remove are both ignored If Replace/Remove are ignored or absent, the result as same type as the starting shape

Reimplemented in ShapeBuild_ReShape.

virtual TopoDS_Shape BRepTools_ReShape::Apply	(	const TopoDS_Shape &	shape,
		const TopAbs_ShapeEnum	until = `TopAbs_SHAPE`
	)

virtual

Applies the substitutions requests to a shape.

<until> gives the level of type until which requests are taken into account. For subshapes of the type <until> no rebuild and futher exploring are done.

NOTE: each subshape can be replaced by shape of the same type or by shape containing only shapes of that type (for example, TopoDS_Edge can be replaced by TopoDS_Edge, TopoDS_Wire or TopoDS_Compound containing TopoDS_Edges). If incompatible shape type is encountered, it is ignored and flag FAIL1 is set in Status.

Reimplemented in ShapeBuild_ReShape.

virtual void BRepTools_ReShape::Clear ( )

virtual

Clears all substitutions requests.

virtual Standard_Boolean BRepTools_ReShape::IsRecorded ( const TopoDS_Shape & shape ) const

virtual

Tells if a shape is recorded for Replace/Remove.

virtual Standard_Boolean& BRepTools_ReShape::ModeConsiderLocation ( )

virtual

Returns (modifiable) the flag which defines whether Location of shape take into account during replacing shapes.

virtual Standard_Boolean& BRepTools_ReShape::ModeConsiderOrientation ( )

virtual

Returns (modifiable) the flag which defines whether Orientation of shape take into account during replacing shapes.

virtual void BRepTools_ReShape::Remove	(	const TopoDS_Shape &	shape,
		const Standard_Boolean	oriented = `Standard_False`
	)

virtual

Sets a request to Remove a Shape If <oriented> is True, only for a shape with the SAME orientation. Else, whatever the orientation.

virtual void BRepTools_ReShape::Replace	(	const TopoDS_Shape &	shape,
		const TopoDS_Shape &	newshape,
		const Standard_Boolean	oriented = `Standard_False`
	)

virtual

Sets a request to Replace a Shape by a new one If <oriented> is True, only if the orientation is the same Else, whatever the orientation, and the new shape takes the same orientation as <newshape> if the replaced one has the same as <shape>, else it is reversed.

virtual Standard_Integer BRepTools_ReShape::Status	(	const TopoDS_Shape &	shape,
		TopoDS_Shape &	newsh,
		const Standard_Boolean	last = `Standard_False`
	)

virtual

Returns a complete substitution status for a shape 0 : not recorded, <newsh> = original <shape> < 0: to be removed, <newsh> is NULL

0: to be replaced, <newsh> is a new item

If <last> is False, returns status and new shape recorded in the map directly for the shape, if True and status > 0 then recursively searches for the last status and new shape.

Reimplemented in ShapeBuild_ReShape.

virtual TopoDS_Shape BRepTools_ReShape::Value ( const TopoDS_Shape & shape ) const

virtual

Returns the new value for an individual shape If not recorded, returns the original shape itself If to be Removed, returns a Null Shape Else, returns the replacing item.

Field Documentation

TopTools_DataMapOfShapeShape BRepTools_ReShape::myNMap

protected

TopTools_DataMapOfShapeShape BRepTools_ReShape::myRMap

protected

Standard_Integer BRepTools_ReShape::myStatus

protected

The documentation for this class was generated from the following file:

BRepTools_ReShape.hxx

Public Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Field Documentation