Describes a modification that uses a gp_Trsf to change the geometry of a shape. All functions return true and transform the geometry of the shape. More...

#include <BRepTools_TrsfModification.hxx>

Inheritance diagram for BRepTools_TrsfModification:

[legend]

Public Member Functions
	BRepTools_TrsfModification (const gp_Trsf &T)

gp_Trsf &	Trsf ()
	Provides access to the gp_Trsf associated with this modification. The transformation can be changed. More...

Standard_Boolean	NewSurface (const TopoDS_Face &F, Handle< Geom_Surface > &S, TopLoc_Location &L, Standard_Real &Tol, Standard_Boolean &RevWires, Standard_Boolean &RevFace)
	Returns true if the face F has been modified. If the face has been modified: More...

Standard_Boolean	NewCurve (const TopoDS_Edge &E, Handle< Geom_Curve > &C, TopLoc_Location &L, Standard_Real &Tol)
	Returns true if the edge E has been modified. If the edge has been modified: More...

Standard_Boolean	NewPoint (const TopoDS_Vertex &V, gp_Pnt &P, Standard_Real &Tol)
	Returns true if the vertex V has been modified. If the vertex has been modified: More...

Standard_Boolean	NewCurve2d (const TopoDS_Edge &E, const TopoDS_Face &F, const TopoDS_Edge &NewE, const TopoDS_Face &NewF, Handle< Geom2d_Curve > &C, Standard_Real &Tol)
	Returns true if the edge E has a new curve on surface on the face F. If a new curve exists: More...

Standard_Boolean	NewParameter (const TopoDS_Vertex &V, const TopoDS_Edge &E, Standard_Real &P, Standard_Real &Tol)
	Returns true if the Vertex V has a new parameter on the edge E. If a new parameter exists: More...

GeomAbs_Shape	Continuity (const TopoDS_Edge &E, const TopoDS_Face &F1, const TopoDS_Face &F2, const TopoDS_Edge &NewE, const TopoDS_Face &NewF1, const TopoDS_Face &NewF2)
	Returns the continuity of <NewE> between <NewF1> and <NewF2>. More...

Public Member Functions inherited from BRepTools_Modification
virtual Standard_Boolean	NewTriangulation (const TopoDS_Face &F, Handle< Poly_Triangulation > &T)
	Returns true if the face has been modified according to changed triangulation. If the face has been modified: More...

Public Member Functions inherited from MMgt_TShared
virtual void	Delete () const
	Memory deallocator for transient classes. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual const Handle_Standard_Type &	DynamicType () const
	Returns a type information object about this object. More...

Standard_Boolean	IsInstance (const Handle_Standard_Type &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const Handle_Standard_Type &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

virtual Handle_Standard_Transient	This () const
	Returns a Handle which references this object. Must never be called to objects created in stack. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

Detailed Description

Describes a modification that uses a gp_Trsf to change the geometry of a shape. All functions return true and transform the geometry of the shape.

Constructor & Destructor Documentation

BRepTools_TrsfModification::BRepTools_TrsfModification ( const gp_Trsf & T )

Member Function Documentation

GeomAbs_Shape BRepTools_TrsfModification::Continuity	(	const TopoDS_Edge &	E,
		const TopoDS_Face &	F1,
		const TopoDS_Face &	F2,
		const TopoDS_Edge &	NewE,
		const TopoDS_Face &	NewF1,
		const TopoDS_Face &	NewF2
	)

virtual

Returns the continuity of <NewE> between <NewF1> and <NewF2>.

<NewE> is the new edge created from <E>. <NewF1> (resp. <NewF2>) is the new face created from <F1> (resp. <F2>).

Implements BRepTools_Modification.

Standard_Boolean BRepTools_TrsfModification::NewCurve	(	const TopoDS_Edge &	E,
		Handle< Geom_Curve > &	C,
		TopLoc_Location &	L,
		Standard_Real &	Tol
	)

virtual

Returns true if the edge E has been modified. If the edge has been modified:

C is the new geometric support of the edge,
L is the new location, and
Tol is the new tolerance. If the edge has not been modified, this function returns false, and the values of C, L and Tol are not significant.

Implements BRepTools_Modification.

Reimplemented in ShapeCustom_TrsfModification.

Standard_Boolean BRepTools_TrsfModification::NewCurve2d	(	const TopoDS_Edge &	E,
		const TopoDS_Face &	F,
		const TopoDS_Edge &	NewE,
		const TopoDS_Face &	NewF,
		Handle< Geom2d_Curve > &	C,
		Standard_Real &	Tol
	)

virtual

Returns true if the edge E has a new curve on surface on the face F. If a new curve exists:

C is the new geometric support of the edge,
L is the new location, and
Tol the new tolerance. If no new curve exists, this function returns false, and the values of C, L and Tol are not significant.

Implements BRepTools_Modification.

Reimplemented in ShapeCustom_TrsfModification.

Standard_Boolean BRepTools_TrsfModification::NewParameter	(	const TopoDS_Vertex &	V,
		const TopoDS_Edge &	E,
		Standard_Real &	P,
		Standard_Real &	Tol
	)

virtual

Returns true if the Vertex V has a new parameter on the edge E. If a new parameter exists:

P is the parameter, and
Tol is the new tolerance. If no new parameter exists, this function returns false, and the values of P and Tol are not significant.

Implements BRepTools_Modification.

Reimplemented in ShapeCustom_TrsfModification.

Standard_Boolean BRepTools_TrsfModification::NewPoint	(	const TopoDS_Vertex &	V,
		gp_Pnt &	P,
		Standard_Real &	Tol
	)

virtual

Returns true if the vertex V has been modified. If the vertex has been modified:

P is the new geometry of the vertex, and
Tol is the new tolerance. If the vertex has not been modified this function returns false, and the values of P and Tol are not significant.

Implements BRepTools_Modification.

Reimplemented in ShapeCustom_TrsfModification.

Standard_Boolean BRepTools_TrsfModification::NewSurface	(	const TopoDS_Face &	F,
		Handle< Geom_Surface > &	S,
		TopLoc_Location &	L,
		Standard_Real &	Tol,
		Standard_Boolean &	RevWires,
		Standard_Boolean &	RevFace
	)

virtual

Returns true if the face F has been modified. If the face has been modified:

S is the new geometry of the face,
L is its new location, and
Tol is the new tolerance. RevWires is set to true when the modification reverses the normal of the surface (the wires have to be reversed). RevFace is set to true if the orientation of the modified face changes in the shells which contain it. For this class, RevFace returns true if the gp_Trsf associated with this modification is negative.

Implements BRepTools_Modification.

Reimplemented in ShapeCustom_TrsfModification.

gp_Trsf& BRepTools_TrsfModification::Trsf ( )

Provides access to the gp_Trsf associated with this modification. The transformation can be changed.

The documentation for this class was generated from the following file:

BRepTools_TrsfModification.hxx

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation