Contains information necessary for construction of a 3D fillet or chamfer: More...

#include <ChFiDS_Spine.hxx>

Inheritance diagram for ChFiDS_Spine:

[legend]

Public Member Functions
	ChFiDS_Spine ()

	ChFiDS_Spine (const Standard_Real Tol)

void	SetEdges (const TopoDS_Edge &E)
	store edges composing the guideline More...

void	PutInFirst (const TopoDS_Edge &E)
	store the edge at the first position before all others More...

Standard_Integer	NbEdges () const

const TopoDS_Edge &	Edges (const Standard_Integer I) const

void	SetFirstStatus (const ChFiDS_State S)
	stores if the start of a set of edges starts on a section of free border or forms a closed contour More...

void	SetLastStatus (const ChFiDS_State S)
	stores if the end of a set of edges starts on a section of free border or forms a closed contour More...

virtual void	AppendElSpine (const Handle< ChFiDS_HElSpine > &Els)

Handle< ChFiDS_HElSpine >	ElSpine (const Standard_Integer IE) const

Handle< ChFiDS_HElSpine >	ElSpine (const TopoDS_Edge &E) const

Handle< ChFiDS_HElSpine >	ElSpine (const Standard_Real W) const

ChFiDS_ListOfHElSpine &	ChangeElSpines ()

virtual void	Reset (const Standard_Boolean AllData=Standard_False)

Standard_Boolean	SplitDone () const

void	SplitDone (const Standard_Boolean B)

void	Load ()
	prepare the guideline depending on the edges that are elementary arks (take parameters from a single curvilinear abscissa); to be able to call methods on the geometry (first,last,value,d1,d2) it is necessary to start with preparation otherwise an exception will be raised More...

Standard_Real	Resolution (const Standard_Real R3d) const

Standard_Boolean	IsClosed () const

Standard_Real	FirstParameter () const

Standard_Real	LastParameter () const

void	SetFirstParameter (const Standard_Real Par)

void	SetLastParameter (const Standard_Real Par)

Standard_Real	FirstParameter (const Standard_Integer IndexSpine) const
	gives the total length of all arcs before the number IndexSp More...

Standard_Real	LastParameter (const Standard_Integer IndexSpine) const
	gives the total length till the ark with number IndexSpine (inclus) More...

Standard_Real	Length (const Standard_Integer IndexSpine) const
	gives the length of ark with number IndexSp More...

Standard_Boolean	IsPeriodic () const

Standard_Real	Period () const

Standard_Real	Absc (const Standard_Real U)

Standard_Real	Absc (const Standard_Real U, const Standard_Integer I)

void	Parameter (const Standard_Real AbsC, Standard_Real &U, const Standard_Boolean Oriented=Standard_True)

void	Parameter (const Standard_Integer Index, const Standard_Real AbsC, Standard_Real &U, const Standard_Boolean Oriented=Standard_True)

gp_Pnt	Value (const Standard_Real AbsC)

void	D0 (const Standard_Real AbsC, gp_Pnt &P)

void	D1 (const Standard_Real AbsC, gp_Pnt &P, gp_Vec &V1)

void	D2 (const Standard_Real AbsC, gp_Pnt &P, gp_Vec &V1, gp_Vec &V2)

void	SetCurrent (const Standard_Integer Index)

const BRepAdaptor_Curve &	CurrentElementarySpine (const Standard_Integer Index)
	sets the current curve and returns it More...

Standard_Integer	CurrentIndexOfElementarySpine () const

GeomAbs_CurveType	GetType () const

gp_Lin	Line () const

gp_Circ	Circle () const

ChFiDS_State	FirstStatus () const
	returns if the set of edges starts on a free boundary or if the first vertex is a breakpoint or if the set is closed More...

ChFiDS_State	LastStatus () const
	returns the state at the end of the set More...

ChFiDS_State	Status (const Standard_Boolean IsFirst) const

void	SetStatus (const ChFiDS_State S, const Standard_Boolean IsFirst)

Standard_Boolean	IsTangencyExtremity (const Standard_Boolean IsFirst) const
	returns if the set of edges starts (or end) on Tangency point. More...

void	SetTangencyExtremity (const Standard_Boolean IsTangency, const Standard_Boolean IsFirst)

Standard_Real	Absc (const TopoDS_Vertex &V) const

TopoDS_Vertex	FirstVertex () const

TopoDS_Vertex	LastVertex () const

void	SetFirstTgt (const Standard_Real W)

void	SetLastTgt (const Standard_Real W)

Standard_Boolean	HasFirstTgt () const

Standard_Boolean	HasLastTgt () const

void	SetReference (const Standard_Real W)
	set a parameter reference for the approx. More...

void	SetReference (const Standard_Integer I)
	set a parameter reference for the approx, at the middle of edge I. More...

Standard_Integer	Index (const Standard_Real W, const Standard_Boolean Forward=Standard_True) const

Standard_Integer	Index (const TopoDS_Edge &E) const

void	UnsetReference ()

void	SetErrorStatus (const ChFiDS_ErrorStatus state)

ChFiDS_ErrorStatus	ErrorStatus () const

Public Member Functions inherited from MMgt_TShared
virtual void	Delete () const
	Memory deallocator for transient classes. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual const Handle_Standard_Type &	DynamicType () const
	Returns a type information object about this object. More...

Standard_Boolean	IsInstance (const Handle_Standard_Type &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const Handle_Standard_Type &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

virtual Handle_Standard_Transient	This () const
	Returns a Handle which references this object. Must never be called to objects created in stack. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

Protected Attributes
Standard_Boolean	splitdone

ChFiDS_ListOfHElSpine	elspines

Detailed Description

Contains information necessary for construction of a 3D fillet or chamfer:

guideline composed of edges of the solid, tangents between them, and borders by faces tangents between them.

Tools for construction of the Sp by propagation from an edge of solid are provided in the Builder of Fil3d.

The Spine contains among others the information about the nature of extremities of the fillet ( on free border , on section or closed ).

IMPORTANT NOTE : the guideline represented in this way is not C2, although the path claims it. Several palliative workarounds (see the methods at the end) are planned, but they are not enough. It is necessary to change the approach and double the Spine of line C2 with the known consequences for management of interactions between KPart Blend in Fil3d.

Constructor & Destructor Documentation

ChFiDS_Spine::ChFiDS_Spine ( )

ChFiDS_Spine::ChFiDS_Spine ( const Standard_Real Tol )

Member Function Documentation

Standard_Real ChFiDS_Spine::Absc ( const Standard_Real U )

Standard_Real ChFiDS_Spine::Absc	(	const Standard_Real	U,
		const Standard_Integer	I
	)

Standard_Real ChFiDS_Spine::Absc ( const TopoDS_Vertex & V ) const

virtual void ChFiDS_Spine::AppendElSpine ( const Handle< ChFiDS_HElSpine > & Els )

virtual

Reimplemented in ChFiDS_FilSpine.

ChFiDS_ListOfHElSpine& ChFiDS_Spine::ChangeElSpines ( )

gp_Circ ChFiDS_Spine::Circle ( ) const

const BRepAdaptor_Curve& ChFiDS_Spine::CurrentElementarySpine ( const Standard_Integer Index )

sets the current curve and returns it

Standard_Integer ChFiDS_Spine::CurrentIndexOfElementarySpine ( ) const

void ChFiDS_Spine::D0	(	const Standard_Real	AbsC,
		gp_Pnt &	P
	)

void ChFiDS_Spine::D1	(	const Standard_Real	AbsC,
		gp_Pnt &	P,
		gp_Vec &	V1
	)

void ChFiDS_Spine::D2	(	const Standard_Real	AbsC,
		gp_Pnt &	P,
		gp_Vec &	V1,
		gp_Vec &	V2
	)

const TopoDS_Edge& ChFiDS_Spine::Edges ( const Standard_Integer I ) const

Handle< ChFiDS_HElSpine > ChFiDS_Spine::ElSpine ( const Standard_Integer IE ) const

Handle< ChFiDS_HElSpine > ChFiDS_Spine::ElSpine ( const TopoDS_Edge & E ) const

Handle< ChFiDS_HElSpine > ChFiDS_Spine::ElSpine ( const Standard_Real W ) const

ChFiDS_ErrorStatus ChFiDS_Spine::ErrorStatus ( ) const

Standard_Real ChFiDS_Spine::FirstParameter ( ) const

Standard_Real ChFiDS_Spine::FirstParameter ( const Standard_Integer IndexSpine ) const

gives the total length of all arcs before the number IndexSp

ChFiDS_State ChFiDS_Spine::FirstStatus ( ) const

returns if the set of edges starts on a free boundary or if the first vertex is a breakpoint or if the set is closed

TopoDS_Vertex ChFiDS_Spine::FirstVertex ( ) const

GeomAbs_CurveType ChFiDS_Spine::GetType ( ) const

Standard_Boolean ChFiDS_Spine::HasFirstTgt ( ) const

Standard_Boolean ChFiDS_Spine::HasLastTgt ( ) const

Standard_Integer ChFiDS_Spine::Index	(	const Standard_Real	W,
		const Standard_Boolean	Forward = `Standard_True`
	)		const

Standard_Integer ChFiDS_Spine::Index ( const TopoDS_Edge & E ) const

Standard_Boolean ChFiDS_Spine::IsClosed ( ) const

Standard_Boolean ChFiDS_Spine::IsPeriodic ( ) const

Standard_Boolean ChFiDS_Spine::IsTangencyExtremity ( const Standard_Boolean IsFirst ) const

returns if the set of edges starts (or end) on Tangency point.

Standard_Real ChFiDS_Spine::LastParameter ( ) const

Standard_Real ChFiDS_Spine::LastParameter ( const Standard_Integer IndexSpine ) const

gives the total length till the ark with number IndexSpine (inclus)

ChFiDS_State ChFiDS_Spine::LastStatus ( ) const

returns the state at the end of the set

TopoDS_Vertex ChFiDS_Spine::LastVertex ( ) const

Standard_Real ChFiDS_Spine::Length ( const Standard_Integer IndexSpine ) const

gives the length of ark with number IndexSp

gp_Lin ChFiDS_Spine::Line ( ) const

void ChFiDS_Spine::Load ( )

prepare the guideline depending on the edges that are elementary arks (take parameters from a single curvilinear abscissa); to be able to call methods on the geometry (first,last,value,d1,d2) it is necessary to start with preparation otherwise an exception will be raised

Standard_Integer ChFiDS_Spine::NbEdges ( ) const

void ChFiDS_Spine::Parameter	(	const Standard_Real	AbsC,
		Standard_Real &	U,
		const Standard_Boolean	Oriented = `Standard_True`
	)

void ChFiDS_Spine::Parameter	(	const Standard_Integer	Index,
		const Standard_Real	AbsC,
		Standard_Real &	U,
		const Standard_Boolean	Oriented = `Standard_True`
	)

Standard_Real ChFiDS_Spine::Period ( ) const

void ChFiDS_Spine::PutInFirst ( const TopoDS_Edge & E )

store the edge at the first position before all others

virtual void ChFiDS_Spine::Reset ( const Standard_Boolean AllData = Standard_False )

virtual

Reimplemented in ChFiDS_FilSpine.

Standard_Real ChFiDS_Spine::Resolution ( const Standard_Real R3d ) const

void ChFiDS_Spine::SetCurrent ( const Standard_Integer Index )

void ChFiDS_Spine::SetEdges ( const TopoDS_Edge & E )

store edges composing the guideline

void ChFiDS_Spine::SetErrorStatus ( const ChFiDS_ErrorStatus state )

void ChFiDS_Spine::SetFirstParameter ( const Standard_Real Par )

void ChFiDS_Spine::SetFirstStatus ( const ChFiDS_State S )

stores if the start of a set of edges starts on a section of free border or forms a closed contour

void ChFiDS_Spine::SetFirstTgt ( const Standard_Real W )

void ChFiDS_Spine::SetLastParameter ( const Standard_Real Par )

void ChFiDS_Spine::SetLastStatus ( const ChFiDS_State S )

stores if the end of a set of edges starts on a section of free border or forms a closed contour

void ChFiDS_Spine::SetLastTgt ( const Standard_Real W )

void ChFiDS_Spine::SetReference ( const Standard_Real W )

set a parameter reference for the approx.

void ChFiDS_Spine::SetReference ( const Standard_Integer I )

set a parameter reference for the approx, at the middle of edge I.

void ChFiDS_Spine::SetStatus	(	const ChFiDS_State	S,
		const Standard_Boolean	IsFirst
	)

void ChFiDS_Spine::SetTangencyExtremity	(	const Standard_Boolean	IsTangency,
		const Standard_Boolean	IsFirst
	)

Standard_Boolean ChFiDS_Spine::SplitDone ( ) const

void ChFiDS_Spine::SplitDone ( const Standard_Boolean B )

ChFiDS_State ChFiDS_Spine::Status ( const Standard_Boolean IsFirst ) const

void ChFiDS_Spine::UnsetReference ( )

gp_Pnt ChFiDS_Spine::Value ( const Standard_Real AbsC )

Field Documentation

ChFiDS_ListOfHElSpine ChFiDS_Spine::elspines

protected

Standard_Boolean ChFiDS_Spine::splitdone

protected

The documentation for this class was generated from the following file:

ChFiDS_Spine.hxx

Public Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Field Documentation