GeomFill_Sweep Class Reference

Geometrical Sweep Algorithm. More...

#include <GeomFill_Sweep.hxx>

Public Member Functions
	GeomFill_Sweep (const Handle< GeomFill_LocationLaw > &Location, const Standard_Boolean WithKpart=Standard_True)
void	SetDomain (const Standard_Real First, const Standard_Real Last, const Standard_Real SectionFirst, const Standard_Real SectionLast)
	Set parametric information [<First>, <Last>] Sets the parametric bound of the sweeping surface to build. <SectionFirst>, <SectionLast> gives coresponding bounds parameter on the section law of <First> and <Last> More...
void	SetTolerance (const Standard_Real Tol3d, const Standard_Real BoundTol=1.0, const Standard_Real Tol2d=1.0e-5, const Standard_Real TolAngular=1.0)
	Set Approximation Tolerance Tol3d : Tolerance to surface approximation Tol2d : Tolerance used to perform curve approximation Normaly the 2d curve are approximated with a tolerance given by the resolution method define in <LocationLaw> but if this tolerance is too large Tol2d is used. TolAngular : Tolerance (in radian) to control the angle beetween tangents on the section law and tangent of iso-v on approximed surface. More...
void	SetForceApproxC1 (const Standard_Boolean ForceApproxC1)
	Set the flag that indicates attempt to approximate a C1-continuous surface if a swept surface proved to be C0. More...
Standard_Boolean	ExchangeUV () const
	returns true if sections are U-Iso This can be produce in some cases when <WithKpart> is True. More...
Standard_Boolean	UReversed () const
	returns true if Parametrisation sens in U is inverse of parametrisation sens of section (or of path if ExchangeUV) More...
Standard_Boolean	VReversed () const
	returns true if Parametrisation sens in V is inverse of parametrisation sens of path (or of section if ExchangeUV) More...
void	Build (const Handle< GeomFill_SectionLaw > &Section, const GeomFill_ApproxStyle Methode=GeomFill_Location, const GeomAbs_Shape Continuity=GeomAbs_C2, const Standard_Integer Degmax=10, const Standard_Integer Segmax=30)
	Build the Sweeep Surface ApproxStyle defines Approximation Strategy. More...
Standard_Boolean	IsDone () const
	Tells if the Surface is Buildt. More...
Standard_Real	ErrorOnSurface () const
	Gets the Approximation error. More...
void	ErrorOnRestriction (const Standard_Boolean IsFirst, Standard_Real &UError, Standard_Real &VError) const
	Gets the Approximation error. More...
void	ErrorOnTrace (const Standard_Integer IndexOfTrace, Standard_Real &UError, Standard_Real &VError) const
	Gets the Approximation error. More...
Handle< Geom_Surface >	Surface () const
Handle< Geom2d_Curve >	Restriction (const Standard_Boolean IsFirst) const
Standard_Integer	NumberOfTrace () const
Handle< Geom2d_Curve >	Trace (const Standard_Integer IndexOfTrace) const

Detailed Description

Geometrical Sweep Algorithm.

Constructor & Destructor Documentation

GeomFill_Sweep::GeomFill_Sweep	(	const Handle< GeomFill_LocationLaw > &	Location,
		const Standard_Boolean	WithKpart = Standard_True
	)

Member Function Documentation

void GeomFill_Sweep::Build	(	const Handle< GeomFill_SectionLaw > &	Section,
		const GeomFill_ApproxStyle	Methode = GeomFill_Location,
		const GeomAbs_Shape	Continuity = GeomAbs_C2,
		const Standard_Integer	Degmax = 10,
		const Standard_Integer	Segmax = 30
	)

Build the Sweeep Surface ApproxStyle defines Approximation Strategy.

• GeomFill_Section : The composed Function : Location X Section is directly approximed.
• GeomFill_Location : The location law is approximed, and the SweepSurface is build algebric composition of approximed location law and section law This option is Ok, if Section.Surface() methode is effective. Continuity : The continuity in v waiting on the surface Degmax : The maximum degree in v requiered on the surface Segmax : The maximum number of span in v requiered on the surface

raise If Domain are infinite or Profile not Setted.

void GeomFill_Sweep::ErrorOnRestriction	(	const Standard_Boolean	IsFirst,
		Standard_Real &	UError,
		Standard_Real &	VError
	)		const

Gets the Approximation error.

Standard_Real GeomFill_Sweep::ErrorOnSurface

(

)

const

Gets the Approximation error.

void GeomFill_Sweep::ErrorOnTrace	(	const Standard_Integer	IndexOfTrace,
		Standard_Real &	UError,
		Standard_Real &	VError
	)		const

Gets the Approximation error.

Standard_Boolean GeomFill_Sweep::ExchangeUV

(

)

const

returns true if sections are U-Iso This can be produce in some cases when <WithKpart> is True.

Standard_Boolean GeomFill_Sweep::IsDone

(

)

const

Tells if the Surface is Buildt.

Standard_Integer GeomFill_Sweep::NumberOfTrace

(

)

const

Handle< Geom2d_Curve > GeomFill_Sweep::Restriction

(

const Standard_Boolean

IsFirst

)

const

void GeomFill_Sweep::SetDomain	(	const Standard_Real	First,
		const Standard_Real	Last,
		const Standard_Real	SectionFirst,
		const Standard_Real	SectionLast
	)

Set parametric information [<First>, <Last>] Sets the parametric bound of the sweeping surface to build. <SectionFirst>, <SectionLast> gives coresponding bounds parameter on the section law of <First> and <Last>

V-Iso on Sweeping Surface S(u,v) is defined by Location(v) and Section(w) where w = SectionFirst + (v - First) / (Last-First)

• (SectionLast - SectionFirst)

By default w = v, and First and Last are given by First and Last parameter stored in LocationLaw.

void GeomFill_Sweep::SetForceApproxC1

(

const Standard_Boolean

ForceApproxC1

)

Set the flag that indicates attempt to approximate a C1-continuous surface if a swept surface proved to be C0.

void GeomFill_Sweep::SetTolerance	(	const Standard_Real	Tol3d,
		const Standard_Real	BoundTol = 1.0,
		const Standard_Real	Tol2d = 1.0e-5,
		const Standard_Real	TolAngular = 1.0
	)

Set Approximation Tolerance Tol3d : Tolerance to surface approximation Tol2d : Tolerance used to perform curve approximation Normaly the 2d curve are approximated with a tolerance given by the resolution method define in <LocationLaw> but if this tolerance is too large Tol2d is used. TolAngular : Tolerance (in radian) to control the angle beetween tangents on the section law and tangent of iso-v on approximed surface.

Handle< Geom_Surface > GeomFill_Sweep::Surface

(

)

const

Handle< Geom2d_Curve > GeomFill_Sweep::Trace

(

const Standard_Integer

IndexOfTrace

)

const

Standard_Boolean GeomFill_Sweep::UReversed

(

)

const

returns true if Parametrisation sens in U is inverse of parametrisation sens of section (or of path if ExchangeUV)

Standard_Boolean GeomFill_Sweep::VReversed

(

)

const

returns true if Parametrisation sens in V is inverse of parametrisation sens of path (or of section if ExchangeUV)

---

The documentation for this class was generated from the following file:

• GeomFill_Sweep.hxx