Implementation of the Intersection between two bi-parametrised surfaces. More...

#include <IntPatch_PrmPrmIntersection.hxx>

Public Member Functions
	IntPatch_PrmPrmIntersection ()
	Empty Constructor. More...

void	Perform (const Handle< Adaptor3d_HSurface > &Caro1, const IntPatch_Polyhedron &Polyhedron1, const Handle< Adaptor3d_TopolTool > &Domain1, const Handle< Adaptor3d_HSurface > &Caro2, const IntPatch_Polyhedron &Polyhedron2, const Handle< Adaptor3d_TopolTool > &Domain2, const Standard_Real TolTangency, const Standard_Real Epsilon, const Standard_Real Deflection, const Standard_Real Increment)
	Performs the intersection between <Caro1> and <Caro2>. Associated Polyhedrons <Polyhedron1> and <Polyhedron2> are given. More...

void	Perform (const Handle< Adaptor3d_HSurface > &Caro1, const IntPatch_Polyhedron &Polyhedron1, const Handle< Adaptor3d_TopolTool > &Domain1, const Standard_Real TolTangency, const Standard_Real Epsilon, const Standard_Real Deflection, const Standard_Real Increment)

void	Perform (const Handle< Adaptor3d_HSurface > &Caro1, const Handle< Adaptor3d_TopolTool > &Domain1, const Handle< Adaptor3d_HSurface > &Caro2, const Handle< Adaptor3d_TopolTool > &Domain2, const Standard_Real TolTangency, const Standard_Real Epsilon, const Standard_Real Deflection, const Standard_Real Increment, const Standard_Boolean ClearFlag=Standard_True)
	Performs the intersection between <Caro1> and <Caro2>. The method computes the polyhedron on each surface. More...

void	Perform (const Handle< Adaptor3d_HSurface > &Caro1, const Handle< Adaptor3d_TopolTool > &Domain1, const Handle< Adaptor3d_HSurface > &Caro2, const Handle< Adaptor3d_TopolTool > &Domain2, const Standard_Real TolTangency, const Standard_Real Epsilon, const Standard_Real Deflection, const Standard_Real Increment, IntSurf_ListOfPntOn2S &ListOfPnts, const Standard_Boolean RestrictLine)
	Performs the intersection between <Caro1> and <Caro2>. The method computes the polyhedron on each surface. More...

void	Perform (const Handle< Adaptor3d_HSurface > &Caro1, const Handle< Adaptor3d_TopolTool > &Domain1, const Handle< Adaptor3d_HSurface > &Caro2, const Handle< Adaptor3d_TopolTool > &Domain2, const Standard_Real U1, const Standard_Real V1, const Standard_Real U2, const Standard_Real V2, const Standard_Real TolTangency, const Standard_Real Epsilon, const Standard_Real Deflection, const Standard_Real Increment)
	Performs the intersection between <Caro1> and <Caro2>. The method computes the polyhedron on each surface. More...

void	Perform (const Handle< Adaptor3d_HSurface > &Caro1, const Handle< Adaptor3d_TopolTool > &Domain1, const Standard_Real TolTangency, const Standard_Real Epsilon, const Standard_Real Deflection, const Standard_Real Increment)
	Performs the intersection between <Caro1> and <Caro2>. The method computes the polyhedron on each surface. More...

void	Perform (const Handle< Adaptor3d_HSurface > &Caro1, const Handle< Adaptor3d_TopolTool > &Domain1, const Handle< Adaptor3d_HSurface > &Caro2, const IntPatch_Polyhedron &Polyhedron2, const Handle< Adaptor3d_TopolTool > &Domain2, const Standard_Real TolTangency, const Standard_Real Epsilon, const Standard_Real Deflection, const Standard_Real Increment)
	Performs the intersection between <Caro1> and <Caro2>. More...

void	Perform (const Handle< Adaptor3d_HSurface > &Caro1, const IntPatch_Polyhedron &Polyhedron1, const Handle< Adaptor3d_TopolTool > &Domain1, const Handle< Adaptor3d_HSurface > &Caro2, const Handle< Adaptor3d_TopolTool > &Domain2, const Standard_Real TolTangency, const Standard_Real Epsilon, const Standard_Real Deflection, const Standard_Real Increment)
	Performs the intersection between <Caro1> and <Caro2>. More...

Standard_Boolean	IsDone () const
	Returns true if the calculus was succesfull. More...

Standard_Boolean	IsEmpty () const
	Returns true if the is no intersection. More...

Standard_Integer	NbLines () const
	Returns the number of intersection lines. More...

const Handle< IntPatch_Line > &	Line (const Standard_Integer Index) const
	Returns the line of range Index. An exception is raised if Index<=0 or Index>NbLine. More...

Handle< IntPatch_Line >	NewLine (const Handle< Adaptor3d_HSurface > &Caro1, const Handle< Adaptor3d_HSurface > &Caro2, const Standard_Integer IndexLine, const Standard_Integer LowPoint, const Standard_Integer HighPoint, const Standard_Integer NbPoints) const
	Computes about <NbPoints> Intersection Points on the Line <IndexLine> between the Points of Index <LowPoint> and <HighPoint>. More...

Standard_Integer	GrilleInteger (const Standard_Integer ix, const Standard_Integer iy, const Standard_Integer iz) const

void	IntegerGrille (const Standard_Integer t, Standard_Integer &ix, Standard_Integer &iy, Standard_Integer &iz) const

Standard_Integer	DansGrille (const Standard_Integer t) const

Standard_Integer	NbPointsGrille () const

void	RemplitLin (const Standard_Integer x1, const Standard_Integer y1, const Standard_Integer z1, const Standard_Integer x2, const Standard_Integer y2, const Standard_Integer z2, IntPatch_PrmPrmIntersection_T3Bits &Map) const

void	RemplitTri (const Standard_Integer x1, const Standard_Integer y1, const Standard_Integer z1, const Standard_Integer x2, const Standard_Integer y2, const Standard_Integer z2, const Standard_Integer x3, const Standard_Integer y3, const Standard_Integer z3, IntPatch_PrmPrmIntersection_T3Bits &Map) const

void	Remplit (const Standard_Integer a, const Standard_Integer b, const Standard_Integer c, IntPatch_PrmPrmIntersection_T3Bits &Map) const

Standard_Integer	CodeReject (const Standard_Real x1, const Standard_Real y1, const Standard_Real z1, const Standard_Real x2, const Standard_Real y2, const Standard_Real z2, const Standard_Real x3, const Standard_Real y3, const Standard_Real z3) const

void	PointDepart (Handle< IntSurf_LineOn2S > &LineOn2S, const Handle< Adaptor3d_HSurface > &S1, const Standard_Integer SU1, const Standard_Integer SV1, const Handle< Adaptor3d_HSurface > &S2, const Standard_Integer SU2, const Standard_Integer SV2) const

Detailed Description

Implementation of the Intersection between two bi-parametrised surfaces.

To avoid multiple constructions of the approximated polyhedron of the surfaces, the algorithm can be called whith the two surfaces and their associated polyhedron.

Constructor & Destructor Documentation

IntPatch_PrmPrmIntersection::IntPatch_PrmPrmIntersection ( )

Empty Constructor.

Member Function Documentation

Standard_Integer IntPatch_PrmPrmIntersection::CodeReject	(	const Standard_Real	x1,
		const Standard_Real	y1,
		const Standard_Real	z1,
		const Standard_Real	x2,
		const Standard_Real	y2,
		const Standard_Real	z2,
		const Standard_Real	x3,
		const Standard_Real	y3,
		const Standard_Real	z3
	)		const

Standard_Integer IntPatch_PrmPrmIntersection::DansGrille ( const Standard_Integer t ) const

Standard_Integer IntPatch_PrmPrmIntersection::GrilleInteger	(	const Standard_Integer	ix,
		const Standard_Integer	iy,
		const Standard_Integer	iz
	)		const

void IntPatch_PrmPrmIntersection::IntegerGrille	(	const Standard_Integer	t,
		Standard_Integer &	ix,
		Standard_Integer &	iy,
		Standard_Integer &	iz
	)		const

Standard_Boolean IntPatch_PrmPrmIntersection::IsDone ( ) const

Returns true if the calculus was succesfull.

Standard_Boolean IntPatch_PrmPrmIntersection::IsEmpty ( ) const

Returns true if the is no intersection.

const Handle< IntPatch_Line >& IntPatch_PrmPrmIntersection::Line ( const Standard_Integer Index ) const

Returns the line of range Index. An exception is raised if Index<=0 or Index>NbLine.

Standard_Integer IntPatch_PrmPrmIntersection::NbLines ( ) const

Returns the number of intersection lines.

Standard_Integer IntPatch_PrmPrmIntersection::NbPointsGrille ( ) const

Handle< IntPatch_Line > IntPatch_PrmPrmIntersection::NewLine	(	const Handle< Adaptor3d_HSurface > &	Caro1,
		const Handle< Adaptor3d_HSurface > &	Caro2,
		const Standard_Integer	IndexLine,
		const Standard_Integer	LowPoint,
		const Standard_Integer	HighPoint,
		const Standard_Integer	NbPoints
	)		const

Computes about <NbPoints> Intersection Points on the Line <IndexLine> between the Points of Index <LowPoint> and <HighPoint>.

All the points of the line of index <IndexLine> with an index between <LowPoint> and <HighPoint> are in the returned line. New Points are inserted between existing points if those points are not too closed.

An exception is raised if Index<=0 or Index>NbLine. or if IsDone returns False

void IntPatch_PrmPrmIntersection::Perform	(	const Handle< Adaptor3d_HSurface > &	Caro1,
		const IntPatch_Polyhedron &	Polyhedron1,
		const Handle< Adaptor3d_TopolTool > &	Domain1,
		const Handle< Adaptor3d_HSurface > &	Caro2,
		const IntPatch_Polyhedron &	Polyhedron2,
		const Handle< Adaptor3d_TopolTool > &	Domain2,
		const Standard_Real	TolTangency,
		const Standard_Real	Epsilon,
		const Standard_Real	Deflection,
		const Standard_Real	Increment
	)

Performs the intersection between <Caro1> and <Caro2>. Associated Polyhedrons <Polyhedron1> and <Polyhedron2> are given.

void IntPatch_PrmPrmIntersection::Perform	(	const Handle< Adaptor3d_HSurface > &	Caro1,
		const IntPatch_Polyhedron &	Polyhedron1,
		const Handle< Adaptor3d_TopolTool > &	Domain1,
		const Standard_Real	TolTangency,
		const Standard_Real	Epsilon,
		const Standard_Real	Deflection,
		const Standard_Real	Increment
	)

void IntPatch_PrmPrmIntersection::Perform	(	const Handle< Adaptor3d_HSurface > &	Caro1,
		const Handle< Adaptor3d_TopolTool > &	Domain1,
		const Handle< Adaptor3d_HSurface > &	Caro2,
		const Handle< Adaptor3d_TopolTool > &	Domain2,
		const Standard_Real	TolTangency,
		const Standard_Real	Epsilon,
		const Standard_Real	Deflection,
		const Standard_Real	Increment,
		const Standard_Boolean	ClearFlag = `Standard_True`
	)

Performs the intersection between <Caro1> and <Caro2>. The method computes the polyhedron on each surface.

void IntPatch_PrmPrmIntersection::Perform	(	const Handle< Adaptor3d_HSurface > &	Caro1,
		const Handle< Adaptor3d_TopolTool > &	Domain1,
		const Handle< Adaptor3d_HSurface > &	Caro2,
		const Handle< Adaptor3d_TopolTool > &	Domain2,
		const Standard_Real	TolTangency,
		const Standard_Real	Epsilon,
		const Standard_Real	Deflection,
		const Standard_Real	Increment,
		IntSurf_ListOfPntOn2S &	ListOfPnts,
		const Standard_Boolean	RestrictLine
	)

Performs the intersection between <Caro1> and <Caro2>. The method computes the polyhedron on each surface.

void IntPatch_PrmPrmIntersection::Perform	(	const Handle< Adaptor3d_HSurface > &	Caro1,
		const Handle< Adaptor3d_TopolTool > &	Domain1,
		const Handle< Adaptor3d_HSurface > &	Caro2,
		const Handle< Adaptor3d_TopolTool > &	Domain2,
		const Standard_Real	U1,
		const Standard_Real	V1,
		const Standard_Real	U2,
		const Standard_Real	V2,
		const Standard_Real	TolTangency,
		const Standard_Real	Epsilon,
		const Standard_Real	Deflection,
		const Standard_Real	Increment
	)

Performs the intersection between <Caro1> and <Caro2>. The method computes the polyhedron on each surface.

void IntPatch_PrmPrmIntersection::Perform	(	const Handle< Adaptor3d_HSurface > &	Caro1,
		const Handle< Adaptor3d_TopolTool > &	Domain1,
		const Standard_Real	TolTangency,
		const Standard_Real	Epsilon,
		const Standard_Real	Deflection,
		const Standard_Real	Increment
	)

Performs the intersection between <Caro1> and <Caro2>. The method computes the polyhedron on each surface.

void IntPatch_PrmPrmIntersection::Perform	(	const Handle< Adaptor3d_HSurface > &	Caro1,
		const Handle< Adaptor3d_TopolTool > &	Domain1,
		const Handle< Adaptor3d_HSurface > &	Caro2,
		const IntPatch_Polyhedron &	Polyhedron2,
		const Handle< Adaptor3d_TopolTool > &	Domain2,
		const Standard_Real	TolTangency,
		const Standard_Real	Epsilon,
		const Standard_Real	Deflection,
		const Standard_Real	Increment
	)

Performs the intersection between <Caro1> and <Caro2>.

The polyhedron which approximates <Caro2>, <Polyhedron2> is given. The other one is computed.

void IntPatch_PrmPrmIntersection::Perform	(	const Handle< Adaptor3d_HSurface > &	Caro1,
		const IntPatch_Polyhedron &	Polyhedron1,
		const Handle< Adaptor3d_TopolTool > &	Domain1,
		const Handle< Adaptor3d_HSurface > &	Caro2,
		const Handle< Adaptor3d_TopolTool > &	Domain2,
		const Standard_Real	TolTangency,
		const Standard_Real	Epsilon,
		const Standard_Real	Deflection,
		const Standard_Real	Increment
	)

Performs the intersection between <Caro1> and <Caro2>.

The polyhedron which approximates <Caro1>, <Polyhedron1> is given. The other one is computed.

void IntPatch_PrmPrmIntersection::PointDepart	(	Handle< IntSurf_LineOn2S > &	LineOn2S,
		const Handle< Adaptor3d_HSurface > &	S1,
		const Standard_Integer	SU1,
		const Standard_Integer	SV1,
		const Handle< Adaptor3d_HSurface > &	S2,
		const Standard_Integer	SU2,
		const Standard_Integer	SV2
	)		const

void IntPatch_PrmPrmIntersection::Remplit	(	const Standard_Integer	a,
		const Standard_Integer	b,
		const Standard_Integer	c,
		IntPatch_PrmPrmIntersection_T3Bits &	Map
	)		const

void IntPatch_PrmPrmIntersection::RemplitLin	(	const Standard_Integer	x1,
		const Standard_Integer	y1,
		const Standard_Integer	z1,
		const Standard_Integer	x2,
		const Standard_Integer	y2,
		const Standard_Integer	z2,
		IntPatch_PrmPrmIntersection_T3Bits &	Map
	)		const

void IntPatch_PrmPrmIntersection::RemplitTri	(	const Standard_Integer	x1,
		const Standard_Integer	y1,
		const Standard_Integer	z1,
		const Standard_Integer	x2,
		const Standard_Integer	y2,
		const Standard_Integer	z2,
		const Standard_Integer	x3,
		const Standard_Integer	y3,
		const Standard_Integer	z3,
		IntPatch_PrmPrmIntersection_T3Bits &	Map
	)		const

The documentation for this class was generated from the following file:

IntPatch_PrmPrmIntersection.hxx

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation