Computes the global properties of a geometric solid (3D closed region of space) delimited with : . a surface . a point and a surface . a plane and a surface. More...

#include <BRepGProp_Vinert.hxx>

Inheritance diagram for BRepGProp_Vinert:

[legend]

Public Member Functions
	BRepGProp_Vinert ()

	BRepGProp_Vinert (const BRepGProp_Face &S, const gp_Pnt &VLocation)
	Computes the global properties of a region of 3D space delimited with the surface <S> and the point VLocation. S can be closed The method is quick and its precision is enough for many cases of analytical surfaces. Non-adaptive 2D Gauss integration with predefined numbers of Gauss points is used. Numbers of points depend on types of surfaces and curves. Errror of the computation is not calculated. More...

	BRepGProp_Vinert (BRepGProp_Face &S, const gp_Pnt &VLocation, const Standard_Real Eps)
	Computes the global properties of a region of 3D space delimited with the surface <S> and the point VLocation. S can be closed Adaptive 2D Gauss integration is used. Parameter Eps sets maximal relative error of computed mass (volume) for face. Error is calculated as Abs((M(i+1)-M(i))/M(i+1)), M(i+1) and M(i) are values for two successive steps of adaptive integration. More...

	BRepGProp_Vinert (const BRepGProp_Face &S, const gp_Pnt &O, const gp_Pnt &VLocation)
	Computes the global properties of the region of 3D space delimited with the surface <S> and the point VLocation. The method is quick and its precision is enough for many cases of analytical surfaces. Non-adaptive 2D Gauss integration with predefined numbers of Gauss points is used. Numbers of points depend on types of surfaces and curves. Error of the computation is not calculated. More...

	BRepGProp_Vinert (BRepGProp_Face &S, const gp_Pnt &O, const gp_Pnt &VLocation, const Standard_Real Eps)
	Computes the global properties of the region of 3D space delimited with the surface <S> and the point VLocation. Adaptive 2D Gauss integration is used. Parameter Eps sets maximal relative error of computed mass (volume) for face. Error is calculated as Abs((M(i+1)-M(i))/M(i+1)), M(i+1) and M(i) are values for two successive steps of adaptive integration. WARNING: if Eps > 0.001 algorithm performs non-adaptive integration. More...

	BRepGProp_Vinert (const BRepGProp_Face &S, const gp_Pln &Pl, const gp_Pnt &VLocation)
	Computes the global properties of the region of 3D space delimited with the surface <S> and the plane Pln. The method is quick and its precision is enough for many cases of analytical surfaces. Non-adaptive 2D Gauss integration with predefined numbers of Gauss points is used. Numbers of points depend on types of surfaces and curves. Error of the computation is not calculated. More...

	BRepGProp_Vinert (BRepGProp_Face &S, const gp_Pln &Pl, const gp_Pnt &VLocation, const Standard_Real Eps)
	Computes the global properties of the region of 3D space delimited with the surface <S> and the plane Pln. Adaptive 2D Gauss integration is used. Parameter Eps sets maximal relative error of computed mass (volume) for face. Error is calculated as Abs((M(i+1)-M(i))/M(i+1)), M(i+1) and M(i) are values for two successive steps of adaptive integration. WARNING: if Eps > 0.001 algorithm performs non-adaptive integration. More...

	BRepGProp_Vinert (BRepGProp_Face &S, BRepGProp_Domain &D, const gp_Pnt &VLocation)
	Computes the global properties of a region of 3D space delimited with the surface <S> and the point VLocation. S can be closed The method is quick and its precision is enough for many cases of analytical surfaces. Non-adaptive 2D Gauss integration with predefined numbers of Gauss points is used. Numbers of points depend on types of surfaces and curves. Errror of the computation is not calculated. More...

	BRepGProp_Vinert (BRepGProp_Face &S, BRepGProp_Domain &D, const gp_Pnt &VLocation, const Standard_Real Eps)
	Computes the global properties of a region of 3D space delimited with the surface <S> and the point VLocation. S can be closed Adaptive 2D Gauss integration is used. Parameter Eps sets maximal relative error of computed mass (volume) for face. Error is calculated as Abs((M(i+1)-M(i))/M(i+1)), M(i+1) and M(i) are values for two successive steps of adaptive integration. More...

	BRepGProp_Vinert (BRepGProp_Face &S, BRepGProp_Domain &D, const gp_Pnt &O, const gp_Pnt &VLocation)
	Computes the global properties of the region of 3D space delimited with the surface <S> and the point VLocation. The method is quick and its precision is enough for many cases of analytical surfaces. Non-adaptive 2D Gauss integration with predefined numbers of Gauss points is used. Numbers of points depend on types of surfaces and curves. Error of the computation is not calculated. More...

	BRepGProp_Vinert (BRepGProp_Face &S, BRepGProp_Domain &D, const gp_Pnt &O, const gp_Pnt &VLocation, const Standard_Real Eps)
	Computes the global properties of the region of 3D space delimited with the surface <S> and the point VLocation. Adaptive 2D Gauss integration is used. Parameter Eps sets maximal relative error of computed mass (volume) for face. Error is calculated as Abs((M(i+1)-M(i))/M(i+1)), M(i+1) and M(i) are values for two successive steps of adaptive integration. WARNING: if Eps > 0.001 algorithm performs non-adaptive integration. More...

	BRepGProp_Vinert (BRepGProp_Face &S, BRepGProp_Domain &D, const gp_Pln &Pl, const gp_Pnt &VLocation)
	Computes the global properties of the region of 3D space delimited with the surface <S> and the plane Pln. The method is quick and its precision is enough for many cases of analytical surfaces. Non-adaptive 2D Gauss integration with predefined numbers of Gauss points is used. Numbers of points depend on types of surfaces and curves. Error of the computation is not calculated. More...

	BRepGProp_Vinert (BRepGProp_Face &S, BRepGProp_Domain &D, const gp_Pln &Pl, const gp_Pnt &VLocation, const Standard_Real Eps)
	Computes the global properties of the region of 3D space delimited with the surface <S> and the plane Pln. Adaptive 2D Gauss integration is used. Parameter Eps sets maximal relative error of computed mass (volume) for face. Error is calculated as Abs((M(i+1)-M(i))/M(i+1)), M(i+1) and M(i) are values for two successive steps of adaptive integration. WARNING: if Eps > 0.001 algorithm performs non-adaptive integration. More...

void	SetLocation (const gp_Pnt &VLocation)

void	Perform (const BRepGProp_Face &S)

Standard_Real	Perform (BRepGProp_Face &S, const Standard_Real Eps)

void	Perform (const BRepGProp_Face &S, const gp_Pnt &O)

Standard_Real	Perform (BRepGProp_Face &S, const gp_Pnt &O, const Standard_Real Eps)

void	Perform (const BRepGProp_Face &S, const gp_Pln &Pl)

Standard_Real	Perform (BRepGProp_Face &S, const gp_Pln &Pl, const Standard_Real Eps)

void	Perform (BRepGProp_Face &S, BRepGProp_Domain &D)

Standard_Real	Perform (BRepGProp_Face &S, BRepGProp_Domain &D, const Standard_Real Eps)

void	Perform (BRepGProp_Face &S, BRepGProp_Domain &D, const gp_Pnt &O)

Standard_Real	Perform (BRepGProp_Face &S, BRepGProp_Domain &D, const gp_Pnt &O, const Standard_Real Eps)

void	Perform (BRepGProp_Face &S, BRepGProp_Domain &D, const gp_Pln &Pl)

Standard_Real	Perform (BRepGProp_Face &S, BRepGProp_Domain &D, const gp_Pln &Pl, const Standard_Real Eps)

Standard_Real	GetEpsilon ()
	If previously used methods containe Eps parameter gets actual relative error of the computation, else returns 1.0. More...

Public Member Functions inherited from GProp_GProps
	GProp_GProps ()
	The origin (0, 0, 0) of the absolute cartesian coordinate system is used to compute the global properties. More...

	GProp_GProps (const gp_Pnt &SystemLocation)
	The point SystemLocation is used to compute the gobal properties of the system. For more accuracy it is better to define this point closed to the location of the system. For example it could be a point around the centre of mass of the system. This point is referred to as the reference point for this framework. For greater accuracy it is better for the reference point to be close to the location of the system. It can, for example, be a point near the center of mass of the system. At initialization, the framework is empty; i.e. it retains no dimensional information such as mass, or inertia. However, it is now able to bring together global properties of various other systems, whose global properties have already been computed using another framework. To do this, use the function Add to define the components of the system. Use it once per component of the system, and then use the interrogation functions available to access the computed values. More...

void	Add (const GProp_GProps &Item, const Standard_Real Density=1.0)
	Either. More...

Standard_Real	Mass () const
	Returns the mass of the current system. If no density is attached to the components of the current system the returned value corresponds to : More...

gp_Pnt	CentreOfMass () const
	Returns the center of mass of the current system. If the gravitational field is uniform, it is the center of gravity. The coordinates returned for the center of mass are expressed in the absolute Cartesian coordinate system. More...

gp_Mat	MatrixOfInertia () const
	returns the matrix of inertia. It is a symmetrical matrix. The coefficients of the matrix are the quadratic moments of inertia. More...

void	StaticMoments (Standard_Real &Ix, Standard_Real &Iy, Standard_Real &Iz) const
	Returns Ix, Iy, Iz, the static moments of inertia of the current system; i.e. the moments of inertia about the three axes of the Cartesian coordinate system. More...

Standard_Real	MomentOfInertia (const gp_Ax1 &A) const
	computes the moment of inertia of the material system about the axis A. More...

GProp_PrincipalProps	PrincipalProperties () const
	Computes the principal properties of inertia of the current system. There is always a set of axes for which the products of inertia of a geometric system are equal to 0; i.e. the matrix of inertia of the system is diagonal. These axes are the principal axes of inertia. Their origin is coincident with the center of mass of the system. The associated moments are called the principal moments of inertia. This function computes the eigen values and the eigen vectors of the matrix of inertia of the system. Results are stored by using a presentation framework of principal properties of inertia (GProp_PrincipalProps object) which may be queried to access the value sought. More...

Standard_Real	RadiusOfGyration (const gp_Ax1 &A) const
	Returns the radius of gyration of the current system about the axis A. More...

Additional Inherited Members
Protected Attributes inherited from GProp_GProps
gp_Pnt	g

gp_Pnt	loc

Standard_Real	dim

gp_Mat	inertia

Detailed Description

Computes the global properties of a geometric solid (3D closed region of space) delimited with : . a surface . a point and a surface . a plane and a surface.

The surface can be : . a surface limited with its parametric values U-V, . a surface limited in U-V space with its curves of restriction,

The surface 's requirements to evaluate the global properties are defined in the template SurfaceTool from package GProp.

Constructor & Destructor Documentation

BRepGProp_Vinert::BRepGProp_Vinert ( )

BRepGProp_Vinert::BRepGProp_Vinert	(	const BRepGProp_Face &	S,
		const gp_Pnt &	VLocation
	)

Computes the global properties of a region of 3D space delimited with the surface <S> and the point VLocation. S can be closed The method is quick and its precision is enough for many cases of analytical surfaces. Non-adaptive 2D Gauss integration with predefined numbers of Gauss points is used. Numbers of points depend on types of surfaces and curves. Errror of the computation is not calculated.

BRepGProp_Vinert::BRepGProp_Vinert	(	BRepGProp_Face &	S,
		const gp_Pnt &	VLocation,
		const Standard_Real	Eps
	)

Computes the global properties of a region of 3D space delimited with the surface <S> and the point VLocation. S can be closed Adaptive 2D Gauss integration is used. Parameter Eps sets maximal relative error of computed mass (volume) for face. Error is calculated as Abs((M(i+1)-M(i))/M(i+1)), M(i+1) and M(i) are values for two successive steps of adaptive integration.

BRepGProp_Vinert::BRepGProp_Vinert	(	const BRepGProp_Face &	S,
		const gp_Pnt &	O,
		const gp_Pnt &	VLocation
	)

Computes the global properties of the region of 3D space delimited with the surface <S> and the point VLocation. The method is quick and its precision is enough for many cases of analytical surfaces. Non-adaptive 2D Gauss integration with predefined numbers of Gauss points is used. Numbers of points depend on types of surfaces and curves. Error of the computation is not calculated.

BRepGProp_Vinert::BRepGProp_Vinert	(	BRepGProp_Face &	S,
		const gp_Pnt &	O,
		const gp_Pnt &	VLocation,
		const Standard_Real	Eps
	)

Computes the global properties of the region of 3D space delimited with the surface <S> and the point VLocation. Adaptive 2D Gauss integration is used. Parameter Eps sets maximal relative error of computed mass (volume) for face. Error is calculated as Abs((M(i+1)-M(i))/M(i+1)), M(i+1) and M(i) are values for two successive steps of adaptive integration. WARNING: if Eps > 0.001 algorithm performs non-adaptive integration.

BRepGProp_Vinert::BRepGProp_Vinert	(	const BRepGProp_Face &	S,
		const gp_Pln &	Pl,
		const gp_Pnt &	VLocation
	)

Computes the global properties of the region of 3D space delimited with the surface <S> and the plane Pln. The method is quick and its precision is enough for many cases of analytical surfaces. Non-adaptive 2D Gauss integration with predefined numbers of Gauss points is used. Numbers of points depend on types of surfaces and curves. Error of the computation is not calculated.

BRepGProp_Vinert::BRepGProp_Vinert	(	BRepGProp_Face &	S,
		const gp_Pln &	Pl,
		const gp_Pnt &	VLocation,
		const Standard_Real	Eps
	)

Computes the global properties of the region of 3D space delimited with the surface <S> and the plane Pln. Adaptive 2D Gauss integration is used. Parameter Eps sets maximal relative error of computed mass (volume) for face. Error is calculated as Abs((M(i+1)-M(i))/M(i+1)), M(i+1) and M(i) are values for two successive steps of adaptive integration. WARNING: if Eps > 0.001 algorithm performs non-adaptive integration.

BRepGProp_Vinert::BRepGProp_Vinert	(	BRepGProp_Face &	S,
		BRepGProp_Domain &	D,
		const gp_Pnt &	VLocation
	)

Computes the global properties of a region of 3D space delimited with the surface <S> and the point VLocation. S can be closed The method is quick and its precision is enough for many cases of analytical surfaces. Non-adaptive 2D Gauss integration with predefined numbers of Gauss points is used. Numbers of points depend on types of surfaces and curves. Errror of the computation is not calculated.

BRepGProp_Vinert::BRepGProp_Vinert	(	BRepGProp_Face &	S,
		BRepGProp_Domain &	D,
		const gp_Pnt &	VLocation,
		const Standard_Real	Eps
	)

Computes the global properties of a region of 3D space delimited with the surface <S> and the point VLocation. S can be closed Adaptive 2D Gauss integration is used. Parameter Eps sets maximal relative error of computed mass (volume) for face. Error is calculated as Abs((M(i+1)-M(i))/M(i+1)), M(i+1) and M(i) are values for two successive steps of adaptive integration.

BRepGProp_Vinert::BRepGProp_Vinert	(	BRepGProp_Face &	S,
		BRepGProp_Domain &	D,
		const gp_Pnt &	O,
		const gp_Pnt &	VLocation
	)

Computes the global properties of the region of 3D space delimited with the surface <S> and the point VLocation. The method is quick and its precision is enough for many cases of analytical surfaces. Non-adaptive 2D Gauss integration with predefined numbers of Gauss points is used. Numbers of points depend on types of surfaces and curves. Error of the computation is not calculated.

BRepGProp_Vinert::BRepGProp_Vinert	(	BRepGProp_Face &	S,
		BRepGProp_Domain &	D,
		const gp_Pnt &	O,
		const gp_Pnt &	VLocation,
		const Standard_Real	Eps
	)

Computes the global properties of the region of 3D space delimited with the surface <S> and the point VLocation. Adaptive 2D Gauss integration is used. Parameter Eps sets maximal relative error of computed mass (volume) for face. Error is calculated as Abs((M(i+1)-M(i))/M(i+1)), M(i+1) and M(i) are values for two successive steps of adaptive integration. WARNING: if Eps > 0.001 algorithm performs non-adaptive integration.

BRepGProp_Vinert::BRepGProp_Vinert	(	BRepGProp_Face &	S,
		BRepGProp_Domain &	D,
		const gp_Pln &	Pl,
		const gp_Pnt &	VLocation
	)

Computes the global properties of the region of 3D space delimited with the surface <S> and the plane Pln. The method is quick and its precision is enough for many cases of analytical surfaces. Non-adaptive 2D Gauss integration with predefined numbers of Gauss points is used. Numbers of points depend on types of surfaces and curves. Error of the computation is not calculated.

BRepGProp_Vinert::BRepGProp_Vinert	(	BRepGProp_Face &	S,
		BRepGProp_Domain &	D,
		const gp_Pln &	Pl,
		const gp_Pnt &	VLocation,
		const Standard_Real	Eps
	)

Computes the global properties of the region of 3D space delimited with the surface <S> and the plane Pln. Adaptive 2D Gauss integration is used. Parameter Eps sets maximal relative error of computed mass (volume) for face. Error is calculated as Abs((M(i+1)-M(i))/M(i+1)), M(i+1) and M(i) are values for two successive steps of adaptive integration. WARNING: if Eps > 0.001 algorithm performs non-adaptive integration.

Member Function Documentation

Standard_Real BRepGProp_Vinert::GetEpsilon ( )

If previously used methods containe Eps parameter gets actual relative error of the computation, else returns 1.0.

void BRepGProp_Vinert::Perform ( const BRepGProp_Face & S )

Standard_Real BRepGProp_Vinert::Perform	(	BRepGProp_Face &	S,
		const Standard_Real	Eps
	)

void BRepGProp_Vinert::Perform	(	const BRepGProp_Face &	S,
		const gp_Pnt &	O
	)

Standard_Real BRepGProp_Vinert::Perform	(	BRepGProp_Face &	S,
		const gp_Pnt &	O,
		const Standard_Real	Eps
	)

void BRepGProp_Vinert::Perform	(	const BRepGProp_Face &	S,
		const gp_Pln &	Pl
	)

Standard_Real BRepGProp_Vinert::Perform	(	BRepGProp_Face &	S,
		const gp_Pln &	Pl,
		const Standard_Real	Eps
	)

void BRepGProp_Vinert::Perform	(	BRepGProp_Face &	S,
		BRepGProp_Domain &	D
	)

Standard_Real BRepGProp_Vinert::Perform	(	BRepGProp_Face &	S,
		BRepGProp_Domain &	D,
		const Standard_Real	Eps
	)

void BRepGProp_Vinert::Perform	(	BRepGProp_Face &	S,
		BRepGProp_Domain &	D,
		const gp_Pnt &	O
	)

Standard_Real BRepGProp_Vinert::Perform	(	BRepGProp_Face &	S,
		BRepGProp_Domain &	D,
		const gp_Pnt &	O,
		const Standard_Real	Eps
	)

void BRepGProp_Vinert::Perform	(	BRepGProp_Face &	S,
		BRepGProp_Domain &	D,
		const gp_Pln &	Pl
	)

Standard_Real BRepGProp_Vinert::Perform	(	BRepGProp_Face &	S,
		BRepGProp_Domain &	D,
		const gp_Pln &	Pl,
		const Standard_Real	Eps
	)

void BRepGProp_Vinert::SetLocation ( const gp_Pnt & VLocation )

The documentation for this class was generated from the following file:

BRepGProp_Vinert.hxx

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation