Open CASCADE Technology  7.0.0
Public Member Functions
Geom2d_Line Class Reference

Describes an infinite line in the plane (2D space). A line is defined and positioned in the plane with an axis (gp_Ax2d object) which gives it an origin and a unit vector. The Geom2d_Line line is parameterized as follows: P (U) = O + U*Dir where: More...

#include <Geom2d_Line.hxx>

Inheritance diagram for Geom2d_Line:
Inheritance graph
[legend]

Public Member Functions

 Geom2d_Line (const gp_Ax2d &A)
 Creates a line located in 2D space with the axis placement A. The Location of A is the origin of the line. More...
 
 Geom2d_Line (const gp_Lin2d &L)
 Creates a line by conversion of the gp_Lin2d line L. More...
 
 Geom2d_Line (const gp_Pnt2d &P, const gp_Dir2d &V)
 Constructs a line passing through point P and parallel to vector V (P and V are, respectively, the origin and the unit vector of the positioning axis of the line). More...
 
void SetLin2d (const gp_Lin2d &L)
 Set <me> so that <me> has the same geometric properties as L. More...
 
void SetDirection (const gp_Dir2d &V)
 changes the direction of the line. More...
 
const gp_Dir2dDirection () const
 changes the direction of the line. More...
 
void SetLocation (const gp_Pnt2d &P)
 Changes the "Location" point (origin) of the line. More...
 
const gp_Pnt2dLocation () const
 Changes the "Location" point (origin) of the line. More...
 
void SetPosition (const gp_Ax2d &A)
 Changes the "Location" and a the "Direction" of <me>. More...
 
const gp_Ax2dPosition () const
 
gp_Lin2d Lin2d () const
 Returns non persistent line from gp with the same geometric properties as <me> More...
 
void Reverse () override
 Changes the orientation of this line. As a result, the unit vector of the positioning axis of this line is reversed. More...
 
Standard_Real ReversedParameter (const Standard_Real U) const override
 Computes the parameter on the reversed line for the point of parameter U on this line. For a line, the returned value is -U. More...
 
Standard_Real FirstParameter () const override
 Returns RealFirst from Standard. More...
 
Standard_Real LastParameter () const override
 Returns RealLast from Standard. More...
 
Standard_Boolean IsClosed () const override
 Returns False. More...
 
Standard_Boolean IsPeriodic () const override
 Returns False. More...
 
GeomAbs_Shape Continuity () const override
 Returns GeomAbs_CN, which is the global continuity of any line. More...
 
Standard_Real Distance (const gp_Pnt2d &P) const
 Computes the distance between <me> and the point P. More...
 
Standard_Boolean IsCN (const Standard_Integer N) const override
 Returns True. More...
 
void D0 (const Standard_Real U, gp_Pnt2d &P) const override
 Returns in P the point of parameter U. P (U) = O + U * Dir where O is the "Location" point of the line and Dir the direction of the line. More...
 
void D1 (const Standard_Real U, gp_Pnt2d &P, gp_Vec2d &V1) const override
 Returns the point P of parameter u and the first derivative V1. More...
 
void D2 (const Standard_Real U, gp_Pnt2d &P, gp_Vec2d &V1, gp_Vec2d &V2) const override
 Returns the point P of parameter U, the first and second derivatives V1 and V2. V2 is a vector with null magnitude for a line. More...
 
void D3 (const Standard_Real U, gp_Pnt2d &P, gp_Vec2d &V1, gp_Vec2d &V2, gp_Vec2d &V3) const override
 V2 and V3 are vectors with null magnitude for a line. More...
 
gp_Vec2d DN (const Standard_Real U, const Standard_Integer N) const override
 For the point of parameter U of this line, computes the vector corresponding to the Nth derivative. Note: if N is greater than or equal to 2, the result is a vector with null magnitude. Exceptions Standard_RangeError if N is less than 1. More...
 
void Transform (const gp_Trsf2d &T) override
 Applies the transformation T to this line. More...
 
virtual Standard_Real TransformedParameter (const Standard_Real U, const gp_Trsf2d &T) const override
 Computes the parameter on the line transformed by T for the point of parameter U on this line. For a line, the returned value is equal to U multiplied by the scale factor of transformation T. More...
 
virtual Standard_Real ParametricTransformation (const gp_Trsf2d &T) const override
 Returns the coefficient required to compute the parametric transformation of this line when transformation T is applied. This coefficient is the ratio between the parameter of a point on this line and the parameter of the transformed point on the new line transformed by T. For a line, the returned value is the scale factor of the transformation T. More...
 
Handle< Geom2d_GeometryCopy () const override
 Creates a new object, which is a copy of this line. More...
 
- Public Member Functions inherited from Geom2d_Curve
Handle< Geom2d_CurveReversed () const
 Creates a reversed duplicate Changes the orientation of this curve. The first and last parameters are not changed, but the parametric direction of the curve is reversed. If the curve is bounded: More...
 
virtual Standard_Real Period () const
 Returns thne period of this curve. raises if the curve is not periodic. More...
 
gp_Pnt2d Value (const Standard_Real U) const
 Computes the point of parameter U on <me>. If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. More...
 
- Public Member Functions inherited from Geom2d_Geometry
void Mirror (const gp_Pnt2d &P)
 Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry and assigns the result to this geometric object. More...
 
void Mirror (const gp_Ax2d &A)
 Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. More...
 
void Rotate (const gp_Pnt2d &P, const Standard_Real Ang)
 Rotates a Geometry. P is the center of the rotation. Ang is the angular value of the rotation in radians. More...
 
void Scale (const gp_Pnt2d &P, const Standard_Real S)
 Scales a Geometry. S is the scaling value. More...
 
void Translate (const gp_Vec2d &V)
 Translates a Geometry. V is the vector of the tanslation. More...
 
void Translate (const gp_Pnt2d &P1, const gp_Pnt2d &P2)
 Translates a Geometry from the point P1 to the point P2. More...
 
Handle< Geom2d_GeometryMirrored (const gp_Pnt2d &P) const
 
Handle< Geom2d_GeometryMirrored (const gp_Ax2d &A) const
 
Handle< Geom2d_GeometryRotated (const gp_Pnt2d &P, const Standard_Real Ang) const
 
Handle< Geom2d_GeometryScaled (const gp_Pnt2d &P, const Standard_Real S) const
 
Handle< Geom2d_GeometryTransformed (const gp_Trsf2d &T) const
 
Handle< Geom2d_GeometryTranslated (const gp_Vec2d &V) const
 
Handle< Geom2d_GeometryTranslated (const gp_Pnt2d &P1, const gp_Pnt2d &P2) const
 
- Public Member Functions inherited from MMgt_TShared
virtual void Delete () const override
 Memory deallocator for transient classes. More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 

Detailed Description

Describes an infinite line in the plane (2D space). A line is defined and positioned in the plane with an axis (gp_Ax2d object) which gives it an origin and a unit vector. The Geom2d_Line line is parameterized as follows: P (U) = O + U*Dir where:

Constructor & Destructor Documentation

Geom2d_Line::Geom2d_Line ( const gp_Ax2d A)

Creates a line located in 2D space with the axis placement A. The Location of A is the origin of the line.

Geom2d_Line::Geom2d_Line ( const gp_Lin2d L)

Creates a line by conversion of the gp_Lin2d line L.

Geom2d_Line::Geom2d_Line ( const gp_Pnt2d P,
const gp_Dir2d V 
)

Constructs a line passing through point P and parallel to vector V (P and V are, respectively, the origin and the unit vector of the positioning axis of the line).

Member Function Documentation

GeomAbs_Shape Geom2d_Line::Continuity ( ) const
overridevirtual

Returns GeomAbs_CN, which is the global continuity of any line.

Implements Geom2d_Curve.

Handle< Geom2d_Geometry > Geom2d_Line::Copy ( ) const
overridevirtual

Creates a new object, which is a copy of this line.

Implements Geom2d_Geometry.

void Geom2d_Line::D0 ( const Standard_Real  U,
gp_Pnt2d P 
) const
overridevirtual

Returns in P the point of parameter U. P (U) = O + U * Dir where O is the "Location" point of the line and Dir the direction of the line.

Implements Geom2d_Curve.

void Geom2d_Line::D1 ( const Standard_Real  U,
gp_Pnt2d P,
gp_Vec2d V1 
) const
overridevirtual

Returns the point P of parameter u and the first derivative V1.

Implements Geom2d_Curve.

void Geom2d_Line::D2 ( const Standard_Real  U,
gp_Pnt2d P,
gp_Vec2d V1,
gp_Vec2d V2 
) const
overridevirtual

Returns the point P of parameter U, the first and second derivatives V1 and V2. V2 is a vector with null magnitude for a line.

Implements Geom2d_Curve.

void Geom2d_Line::D3 ( const Standard_Real  U,
gp_Pnt2d P,
gp_Vec2d V1,
gp_Vec2d V2,
gp_Vec2d V3 
) const
overridevirtual

V2 and V3 are vectors with null magnitude for a line.

Implements Geom2d_Curve.

const gp_Dir2d& Geom2d_Line::Direction ( ) const

changes the direction of the line.

Standard_Real Geom2d_Line::Distance ( const gp_Pnt2d P) const

Computes the distance between <me> and the point P.

gp_Vec2d Geom2d_Line::DN ( const Standard_Real  U,
const Standard_Integer  N 
) const
overridevirtual

For the point of parameter U of this line, computes the vector corresponding to the Nth derivative. Note: if N is greater than or equal to 2, the result is a vector with null magnitude. Exceptions Standard_RangeError if N is less than 1.

Implements Geom2d_Curve.

Standard_Real Geom2d_Line::FirstParameter ( ) const
overridevirtual

Returns RealFirst from Standard.

Implements Geom2d_Curve.

Standard_Boolean Geom2d_Line::IsClosed ( ) const
overridevirtual

Returns False.

Implements Geom2d_Curve.

Standard_Boolean Geom2d_Line::IsCN ( const Standard_Integer  N) const
overridevirtual

Returns True.

Implements Geom2d_Curve.

Standard_Boolean Geom2d_Line::IsPeriodic ( ) const
overridevirtual

Returns False.

Implements Geom2d_Curve.

Standard_Real Geom2d_Line::LastParameter ( ) const
overridevirtual

Returns RealLast from Standard.

Implements Geom2d_Curve.

gp_Lin2d Geom2d_Line::Lin2d ( ) const

Returns non persistent line from gp with the same geometric properties as <me>

const gp_Pnt2d& Geom2d_Line::Location ( ) const

Changes the "Location" point (origin) of the line.

virtual Standard_Real Geom2d_Line::ParametricTransformation ( const gp_Trsf2d T) const
overridevirtual

Returns the coefficient required to compute the parametric transformation of this line when transformation T is applied. This coefficient is the ratio between the parameter of a point on this line and the parameter of the transformed point on the new line transformed by T. For a line, the returned value is the scale factor of the transformation T.

Reimplemented from Geom2d_Curve.

const gp_Ax2d& Geom2d_Line::Position ( ) const
void Geom2d_Line::Reverse ( )
overridevirtual

Changes the orientation of this line. As a result, the unit vector of the positioning axis of this line is reversed.

Implements Geom2d_Curve.

Standard_Real Geom2d_Line::ReversedParameter ( const Standard_Real  U) const
overridevirtual

Computes the parameter on the reversed line for the point of parameter U on this line. For a line, the returned value is -U.

Implements Geom2d_Curve.

void Geom2d_Line::SetDirection ( const gp_Dir2d V)

changes the direction of the line.

void Geom2d_Line::SetLin2d ( const gp_Lin2d L)

Set <me> so that <me> has the same geometric properties as L.

void Geom2d_Line::SetLocation ( const gp_Pnt2d P)

Changes the "Location" point (origin) of the line.

void Geom2d_Line::SetPosition ( const gp_Ax2d A)

Changes the "Location" and a the "Direction" of <me>.

void Geom2d_Line::Transform ( const gp_Trsf2d T)
overridevirtual

Applies the transformation T to this line.

Implements Geom2d_Geometry.

virtual Standard_Real Geom2d_Line::TransformedParameter ( const Standard_Real  U,
const gp_Trsf2d T 
) const
overridevirtual

Computes the parameter on the line transformed by T for the point of parameter U on this line. For a line, the returned value is equal to U multiplied by the scale factor of transformation T.

Reimplemented from Geom2d_Curve.


The documentation for this class was generated from the following file: