Open CASCADE Technology  7.0.0
Public Member Functions
IntPatch_ALine Class Reference

Implementation of an intersection line described by a parametrised curve. More...

#include <IntPatch_ALine.hxx>

Inheritance diagram for IntPatch_ALine:
Inheritance graph
[legend]

Public Member Functions

 IntPatch_ALine (const IntAna_Curve &C, const Standard_Boolean Tang, const IntSurf_TypeTrans Trans1, const IntSurf_TypeTrans Trans2)
 Creates an analytic intersection line when the transitions are In or Out. More...
 
 IntPatch_ALine (const IntAna_Curve &C, const Standard_Boolean Tang, const IntSurf_Situation Situ1, const IntSurf_Situation Situ2)
 Creates an analytic intersection line when the transitions are Touch. More...
 
 IntPatch_ALine (const IntAna_Curve &C, const Standard_Boolean Tang)
 Creates an analytic intersection line when the transitions are Undecided. More...
 
void AddVertex (const IntPatch_Point &Pnt)
 To add a vertex in the list. More...
 
void Replace (const Standard_Integer Index, const IntPatch_Point &Pnt)
 Replaces the element of range Index in the list of points. More...
 
void SetFirstPoint (const Standard_Integer IndFirst)
 
void SetLastPoint (const Standard_Integer IndLast)
 
Standard_Real FirstParameter (Standard_Boolean &IsIncluded) const
 Returns the first parameter on the intersection line. If IsIncluded returns True, Value and D1 methods can be call with a parameter equal to FirstParamater. Otherwise, the parameter must be greater than FirstParameter. More...
 
Standard_Real LastParameter (Standard_Boolean &IsIncluded) const
 Returns the last parameter on the intersection line. If IsIncluded returns True, Value and D1 methods can be call with a parameter equal to LastParamater. Otherwise, the parameter must be less than LastParameter. More...
 
gp_Pnt Value (const Standard_Real U)
 Returns the point of parameter U on the analytic intersection line. More...
 
Standard_Boolean D1 (const Standard_Real U, gp_Pnt &P, gp_Vec &Du)
 Returns Standard_True when the derivative at parameter U is defined on the analytic intersection line. In that case, Du is the derivative. Returns Standard_False when it is not possible to evaluate the derivative. In both cases, P is the point at parameter U on the intersection. More...
 
Standard_Boolean FindParameter (const gp_Pnt &P, Standard_Real &Para) const
 Tries to find the parameter of the point P on the curve. If the method returns False, the "projection" is impossible, and the value of Para is not significant. If the method returns True, Para is the parameter of the nearest intersection between the curve and the iso-theta containing P. More...
 
Standard_Boolean HasFirstPoint () const
 Returns True if the line has a known First point. This point is given by the method FirstPoint(). More...
 
Standard_Boolean HasLastPoint () const
 Returns True if the line has a known Last point. This point is given by the method LastPoint(). More...
 
const IntPatch_PointFirstPoint () const
 Returns the IntPoint corresponding to the FirstPoint. An exception is raised when HasFirstPoint returns False. More...
 
const IntPatch_PointLastPoint () const
 Returns the IntPoint corresponding to the LastPoint. An exception is raised when HasLastPoint returns False. More...
 
Standard_Integer NbVertex () const
 
const IntPatch_PointVertex (const Standard_Integer Index) const
 Returns the vertex of range Index on the line. More...
 
void ComputeVertexParameters (const Standard_Real Tol)
 Set the parameters of all the vertex on the line. if a vertex is already in the line, its parameter is modified else a new point in the line is inserted. More...
 
const IntAna_CurveCurve () const
 
- Public Member Functions inherited from IntPatch_Line
void SetValue (const Standard_Boolean Uiso1, const Standard_Boolean Viso1, const Standard_Boolean Uiso2, const Standard_Boolean Viso2)
 To set the values returned by IsUIsoS1,.... The default values are False. More...
 
IntPatch_IType ArcType () const
 Returns the type of geometry 3d (Line, Circle, Parabola, Hyperbola, Ellipse, Analytic, Walking, Restriction) More...
 
Standard_Boolean IsTangent () const
 Returns TRUE if the intersection is a line of tangency between the 2 patches. More...
 
IntSurf_TypeTrans TransitionOnS1 () const
 Returns the type of the transition of the line for the first surface. The transition is "constant" along the line. The transition is IN if the line is oriented in such a way that the system of vector (N1,N2,T) is right-handed, where N1 is the normal to the first surface at a point P, N2 is the normal to the second surface at a point P, T is the tangent to the intersection line at P. If the system of vector is left-handed, the transition is OUT. When N1 and N2 are colinear all along the intersection line, the transition will be. More...
 
IntSurf_TypeTrans TransitionOnS2 () const
 Returns the type of the transition of the line for the second surface. The transition is "constant" along the line. More...
 
IntSurf_Situation SituationS1 () const
 Returns the situation (INSIDE/OUTSIDE/UNKNOWN) of the first patch compared to the second one, when TransitionOnS1 or TransitionOnS2 returns TOUCH. Otherwise, an exception is raised. More...
 
IntSurf_Situation SituationS2 () const
 Returns the situation (INSIDE/OUTSIDE/UNKNOWN) of the second patch compared to the first one, when TransitionOnS1 or TransitionOnS2 returns TOUCH. Otherwise, an exception is raised. More...
 
Standard_Boolean IsUIsoOnS1 () const
 Returns TRUE if the intersection is a U isoparametric curve on the first patch. More...
 
Standard_Boolean IsVIsoOnS1 () const
 Returns TRUE if the intersection is a V isoparametric curve on the first patch. More...
 
Standard_Boolean IsUIsoOnS2 () const
 Returns TRUE if the intersection is a U isoparametric curve on the second patch. More...
 
Standard_Boolean IsVIsoOnS2 () const
 Returns TRUE if the intersection is a V isoparametric curve on the second patch. More...
 
- Public Member Functions inherited from MMgt_TShared
virtual void Delete () const override
 Memory deallocator for transient classes. More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 
- Protected Member Functions inherited from IntPatch_Line
 IntPatch_Line (const Standard_Boolean Tang, const IntSurf_TypeTrans Trans1, const IntSurf_TypeTrans Trans2)
 To initialize the fields, when the transitions are In or Out. More...
 
 IntPatch_Line (const Standard_Boolean Tang, const IntSurf_Situation Situ1, const IntSurf_Situation Situ2)
 To initialize the fields, when the transitions are Touch. More...
 
 IntPatch_Line (const Standard_Boolean Tang)
 To initialize the fields, when the transitions are Undecided. More...
 
- Protected Attributes inherited from IntPatch_Line
IntPatch_IType typ
 

Detailed Description

Implementation of an intersection line described by a parametrised curve.

Constructor & Destructor Documentation

IntPatch_ALine::IntPatch_ALine ( const IntAna_Curve C,
const Standard_Boolean  Tang,
const IntSurf_TypeTrans  Trans1,
const IntSurf_TypeTrans  Trans2 
)

Creates an analytic intersection line when the transitions are In or Out.

IntPatch_ALine::IntPatch_ALine ( const IntAna_Curve C,
const Standard_Boolean  Tang,
const IntSurf_Situation  Situ1,
const IntSurf_Situation  Situ2 
)

Creates an analytic intersection line when the transitions are Touch.

IntPatch_ALine::IntPatch_ALine ( const IntAna_Curve C,
const Standard_Boolean  Tang 
)

Creates an analytic intersection line when the transitions are Undecided.

Member Function Documentation

void IntPatch_ALine::AddVertex ( const IntPatch_Point Pnt)

To add a vertex in the list.

void IntPatch_ALine::ComputeVertexParameters ( const Standard_Real  Tol)

Set the parameters of all the vertex on the line. if a vertex is already in the line, its parameter is modified else a new point in the line is inserted.

const IntAna_Curve& IntPatch_ALine::Curve ( ) const
Standard_Boolean IntPatch_ALine::D1 ( const Standard_Real  U,
gp_Pnt P,
gp_Vec Du 
)

Returns Standard_True when the derivative at parameter U is defined on the analytic intersection line. In that case, Du is the derivative. Returns Standard_False when it is not possible to evaluate the derivative. In both cases, P is the point at parameter U on the intersection.

Standard_Boolean IntPatch_ALine::FindParameter ( const gp_Pnt P,
Standard_Real Para 
) const

Tries to find the parameter of the point P on the curve. If the method returns False, the "projection" is impossible, and the value of Para is not significant. If the method returns True, Para is the parameter of the nearest intersection between the curve and the iso-theta containing P.

Standard_Real IntPatch_ALine::FirstParameter ( Standard_Boolean IsIncluded) const

Returns the first parameter on the intersection line. If IsIncluded returns True, Value and D1 methods can be call with a parameter equal to FirstParamater. Otherwise, the parameter must be greater than FirstParameter.

const IntPatch_Point& IntPatch_ALine::FirstPoint ( ) const

Returns the IntPoint corresponding to the FirstPoint. An exception is raised when HasFirstPoint returns False.

Standard_Boolean IntPatch_ALine::HasFirstPoint ( ) const

Returns True if the line has a known First point. This point is given by the method FirstPoint().

Standard_Boolean IntPatch_ALine::HasLastPoint ( ) const

Returns True if the line has a known Last point. This point is given by the method LastPoint().

Standard_Real IntPatch_ALine::LastParameter ( Standard_Boolean IsIncluded) const

Returns the last parameter on the intersection line. If IsIncluded returns True, Value and D1 methods can be call with a parameter equal to LastParamater. Otherwise, the parameter must be less than LastParameter.

const IntPatch_Point& IntPatch_ALine::LastPoint ( ) const

Returns the IntPoint corresponding to the LastPoint. An exception is raised when HasLastPoint returns False.

Standard_Integer IntPatch_ALine::NbVertex ( ) const
void IntPatch_ALine::Replace ( const Standard_Integer  Index,
const IntPatch_Point Pnt 
)

Replaces the element of range Index in the list of points.

void IntPatch_ALine::SetFirstPoint ( const Standard_Integer  IndFirst)
void IntPatch_ALine::SetLastPoint ( const Standard_Integer  IndLast)
gp_Pnt IntPatch_ALine::Value ( const Standard_Real  U)

Returns the point of parameter U on the analytic intersection line.

const IntPatch_Point& IntPatch_ALine::Vertex ( const Standard_Integer  Index) const

Returns the vertex of range Index on the line.


The documentation for this class was generated from the following file: