A framework to manage presentation and selection of shapes. AIS_Shape is the interactive object which is used the most by applications. There are standard functions available which allow you to prepare selection operations on the constituent elements of shapes - vertices, edges, faces etc - in an open local context. The selection modes specific to "Shape" type objects are referred to as Standard Activation Mode. These modes are only taken into account in open local context and only act on Interactive Objects which have redefined the virtual method AcceptShapeDecomposition so that it returns true. Several advanced functions are also available. These include functions to manage deviation angle and deviation coefficient - both HLR and non-HLR - of an inheriting shape class. These services allow you to select one type of shape interactive object for higher precision drawing. When you do this, the Prs3d_Drawer::IsOwn... functions corresponding to the above deviation angle and coefficient functions return true indicating that there is a local setting available for the specific object. More...

#include <AIS_Shape.hxx>

Inheritance diagram for AIS_Shape:

[legend]

Public Member Functions
	AIS_Shape (const TopoDS_Shape &shap)
	Initializes construction of the shape shap from wires, edges and vertices. More...

virtual Standard_Integer	Signature () const override
	Returns index 0. This value refers to SHAPE from TopAbs_ShapeEnum. More...

virtual AIS_KindOfInteractive	Type () const override
	Returns Object as the type of Interactive Object. More...

virtual Standard_Boolean	AcceptShapeDecomposition () const override
	Returns true if the Interactive Object accepts shape decomposition. More...

void	Set (const TopoDS_Shape &ashap)
	Constructs an instance of the shape object ashape. More...

const TopoDS_Shape &	Shape () const
	Returns this shape object. More...

Standard_Boolean	SetOwnDeviationCoefficient ()
	Sets a local value for deviation coefficient for this specific shape. More...

Standard_Boolean	SetOwnHLRDeviationCoefficient ()
	Sets a local value for HLR deviation coefficient for this specific shape. More...

Standard_Boolean	SetOwnDeviationAngle ()
	Sets a local value for deviation angle for this specific shape. More...

Standard_Boolean	SetOwnHLRDeviationAngle ()
	Sets a local value for HLR deviation angle for this specific shape. More...

void	SetOwnDeviationCoefficient (const Standard_Real aCoefficient)
	Sets a local value for deviation coefficient for this specific shape. More...

void	SetOwnHLRDeviationCoefficient (const Standard_Real aCoefficient)
	sets myOwnHLRDeviationCoefficient field in Prs3d_Drawer & recomputes presentation More...

void	SetAngleAndDeviation (const Standard_Real anAngle)
	this compute a new angle and Deviation from the value anAngle and set the values stored in myDrawer with these that become local to the shape More...

Standard_Real	UserAngle () const
	gives back the angle initial value put by the User. More...

void	SetOwnDeviationAngle (const Standard_Real anAngle)
	sets myOwnDeviationAngle field in Prs3d_Drawer & recomputes presentation More...

void	SetHLRAngleAndDeviation (const Standard_Real anAngle)
	this compute a new Angle and Deviation from the value anAngle for HLR and set the values stored in myDrawer for with these that become local to the shape More...

void	SetOwnHLRDeviationAngle (const Standard_Real anAngle)
	sets myOwnHLRDeviationAngle field in Prs3d_Drawer & recomputes presentation More...

Standard_Boolean	OwnDeviationCoefficient (Standard_Real &aCoefficient, Standard_Real &aPreviousCoefficient) const
	Returns true and the values of the deviation coefficient aCoefficient and the previous deviation coefficient aPreviousCoefficient. If these values are not already set, false is returned. More...

Standard_Boolean	OwnHLRDeviationCoefficient (Standard_Real &aCoefficient, Standard_Real &aPreviousCoefficient) const
	Returns true and the values of the HLR deviation coefficient aCoefficient and the previous HLR deviation coefficient aPreviousCoefficient. If these values are not already set, false is returned. More...

Standard_Boolean	OwnDeviationAngle (Standard_Real &anAngle, Standard_Real &aPreviousAngle) const
	Returns true and the values of the deviation angle anAngle and the previous deviation angle aPreviousAngle. If these values are not already set, false is returned. More...

Standard_Boolean	OwnHLRDeviationAngle (Standard_Real &anAngle, Standard_Real &aPreviousAngle) const
	Returns true and the values of the HLR deviation angle anAngle and of the previous HLR deviation angle aPreviousAngle. If these values are not already set, false is returned. More...

void	SetTypeOfHLR (const Prs3d_TypeOfHLR theTypeOfHLR)
	Sets the type of HLR algorithm used by the shape. More...

Prs3d_TypeOfHLR	TypeOfHLR () const
	Gets the type of HLR algorithm. More...

virtual void	SetColor (const Quantity_NameOfColor aColor) override
	Sets the color aColor in the reconstructed compound shape. Acts via the Drawer methods below on the appearance of: More...

virtual void	SetColor (const Quantity_Color &aColor) override

virtual void	UnsetColor () override
	Removes settings for color in the reconstructed compound shape. More...

virtual void	SetWidth (const Standard_Real aValue) override
	Sets the value aValue for line width in the reconstructed compound shape. Changes line aspects for lines-only presentation modes like Wireframe and Bounding Box. Doesn't change face boundary line aspect. More...

virtual void	UnsetWidth () override
	Removes the setting for line width in the reconstructed compound shape. More...

virtual void	SetMaterial (const Graphic3d_NameOfMaterial aName) override
	Sets the name aName for material defining this display attribute for the interactive object. Material aspect determines shading aspect, color and transparency of visible entities. More...

virtual void	SetMaterial (const Graphic3d_MaterialAspect &aName) override
	Allows you to provide settings for the material aName in the reconstructed compound shape. More...

virtual void	UnsetMaterial () override
	Removes settings for material in the reconstructed compound shape. More...

virtual void	SetTransparency (const Standard_Real aValue=0.6) override
	Sets the value aValue for transparency in the reconstructed compound shape. More...

virtual void	UnsetTransparency () override
	Removes the setting for transparency in the reconstructed compound shape. More...

virtual const Bnd_Box &	BoundingBox ()
	Constructs a bounding box with which to reconstruct compound topological shapes for presentation. More...

virtual Quantity_NameOfColor	Color () const override
	Returns the NameOfColor attributes of the shape accordingly to the current facing model;. More...

virtual void	Color (Quantity_Color &aColor) const override
	Returns the Color attributes of the shape accordingly to the current facing model;. More...

virtual Graphic3d_NameOfMaterial	Material () const override
	Returns the NameOfMaterial attributes of the shape accordingly to the current facing model;. More...

virtual Standard_Real	Transparency () const override
	Returns the transparency attributes of the shape accordingly to the current facing model;. More...

Public Member Functions inherited from AIS_InteractiveObject
void	SetCurrentFacingModel (const Aspect_TypeOfFacingModel aModel=Aspect_TOFM_BOTH_SIDE)
	change the current facing model apply on polygons for SetColor(), SetTransparency(), SetMaterial() methods default facing model is Aspect_TOFM_TWO_SIDE. This mean that attributes is applying both on the front and back face. More...

Aspect_TypeOfFacingModel	CurrentFacingModel () const
	Returns the current facing model which is in effect. More...

virtual Standard_Boolean	AcceptDisplayMode (const Standard_Integer aMode) const
	Returns true if the class of objects accepts the display mode aMode. The interactive context can have a default mode of representation for the set of Interactive Objects. This mode may not be accepted by a given class of objects. Consequently, this virtual method allowing us to get information about the class in question must be implemented. More...

virtual Standard_Integer	DefaultDisplayMode () const
	Returns the default display mode. This method is to be implemented when the main mode is not mode 0. More...

void	Redisplay (const Standard_Boolean AllModes=Standard_False)
	Updates the active presentation; if <AllModes> = Standard_True all the presentations inside are recomputed. IMPORTANT: It is preferable to call Redisplay method of corresponding AIS_InteractiveContext instance for cases when it is accessible. This method just redirects call to myCTXPtr, so this class field must be up to date for proper result. More...

void	SetInfiniteState (const Standard_Boolean aFlag=Standard_True)
	Sets the infinite state flag aFlage. if <aFlag> = True , the interactiveObject is considered as infinite, i.e. its graphic presentations are not taken in account for View FitAll... More...

Standard_Boolean	IsInfinite () const
	Returns true if the interactive object is infinite. In this case, its graphic presentations are not taken into account in the fit-all view. More...

Standard_Boolean	HasInteractiveContext () const
	Indicates whether the Interactive Object has a pointer to an interactive context. More...

Handle< AIS_InteractiveContext >	GetContext () const
	Returns the context pointer to the interactive context. More...

virtual void	SetContext (const Handle< AIS_InteractiveContext > &aCtx)
	Sets the interactive context aCtx and provides a link to the default drawing tool or "Drawer" if there is none. More...

Standard_Boolean	HasOwner () const
	Returns true if the object has an owner attributed to it. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. More...

const Handle< Standard_Transient > &	GetOwner () const
	Returns the owner of the Interactive Object. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. There are two types of owners: More...

void	SetOwner (const Handle< Standard_Transient > &theApplicativeEntity)
	Allows you to attribute the owner theApplicativeEntity to an Interactive Object. This can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of. The owner takes the form of a transient. More...

void	ClearOwner ()
	Each Interactive Object has methods which allow us to attribute an Owner to it in the form of a Transient. This method removes the owner from the graphic entity. More...

Standard_Boolean	HasDisplayMode () const
	Returns true if the Interactive Object has a display mode setting. Otherwise, it is displayed in Neutral Point. More...

void	SetDisplayMode (const Standard_Integer aMode)
	Sets the display mode aMode for the interactive object. An object can have its own temporary display mode, which is different from that proposed by the interactive context. The range of possibilities currently proposed is the following: More...

void	UnsetDisplayMode ()
	Removes display mode settings from the interactive object. More...

Standard_Integer	DisplayMode () const
	Returns the display mode setting of the Interactive Object. The range of possibilities is the following: More...

Standard_Integer	SelectionPriority () const
	Returns the selection priority setting. -1 indicates that there is none. You can modify the selection priority of an owner to make one entity more selectionable than another one. The default selection priority for an owner is 5, for example. To increase selection priority, choose a setting between 5 and 10. An entity with priority 7 will take priority over one with a setting of 6 if both objects are selected at the same time. You could give vertices priority 8, edges priority 7, faces priority 6, and shapes priority 5. If a vertex, an edge and a face are simultaneously detected during selection, only the vertex will then be highlighted. For trihedra, for example, the default priorities are the following four: More...

void	SetSelectionPriority (const Standard_Integer thePriority)
	Allows you to provide a setting thePriority for selection priority. You can modify selection priority of an owner to make one entity more selectionable than another one. The default selection priority for an owner is 5, for example. To increase selection priority, choose a setting between 5 and 10. An entity with priority 7 will take priority over one with a setting of 6. More...

void	UnsetSelectionPriority ()
	Removes the setting for selection priority. SelectionPriority then returns -1. More...

Standard_Boolean	HasSelectionPriority () const
	Returns true if there is a setting for selection priority. You can modify selection priority of an owner to make one entity more selectionable than another one. The default selection priority for an owner is 5, for example. To increase selection priority, choose a setting between 5 and 10. An entity with priority 7 will take priority over one with a setting of 6. More...

Standard_Boolean	HasHilightMode () const
	Returns true if the Interactive Object is in highlight mode. More...

Standard_Integer	HilightMode () const
	Returns the setting for highlight mode. At dynamic detection, the presentation echoed by the Interactive Context, is by default the presentation already on the screen. You can specify a Highlight presentation mode which is valid no matter what the active representation of the object. It makes no difference whether this choice is temporary or definitive. To do this, we use the following functions: More...

void	SetHilightMode (const Standard_Integer theMode)
	Sets the highlight mode theMode for the interactive object. If, for example, you want to systematically highlight the wireframe presentation of a shape - whether visualized in wireframe presentation or with shading - you set the highlight mode to 0. More...

void	UnsetHilightMode ()
	Allows the user to take a given Prs for hilight ex : for a shape which would be displayed in shading mode the hilight Prs is the wireframe mode. if No specific hilight mode is defined, the displayed Prs will be the hilighted one. More...

Standard_Boolean	HasColor () const
	Returns true if the Interactive Object has color. More...

Standard_Boolean	HasWidth () const
	Returns true if the Interactive Object has width. More...

Standard_Real	Width () const
	Returns the width setting of the Interactive Object. More...

Standard_Boolean	HasMaterial () const
	Returns true if the Interactive Object has a setting for material. More...

Standard_Boolean	IsTransparent () const
	Returns true if there is a transparency setting. More...

virtual void	UnsetAttributes () override
	Clears settings provided by the drawing tool aDrawer. More...

Standard_Boolean	HasPresentation () const
	Returns TRUE when this object has a presentation in the current DisplayMode() More...

Handle< Prs3d_Presentation >	Presentation () const
	Returns the current presentation of this object according to the current DisplayMode() More...

void	SetAspect (const Handle< Prs3d_BasicAspect > &anAspect)
	Sets the graphic basic aspect to the current presentation. More...

virtual void	SetPolygonOffsets (const Standard_Integer aMode, const Standard_ShortReal aFactor=1.0, const Standard_ShortReal aUnits=0.0)
	Sets up polygon offsets for this object. It modifies all existing presentations of <anObj> (if any), so it is reasonable to call this method after <anObj> has been displayed. Otherwise, Compute() method should pass Graphic3d_AspectFillArea3d aspect from <myDrawer> to Graphic3d_Group to make polygon offsets work. More...

virtual Standard_Boolean	HasPolygonOffsets () const
	Returns Standard_True if <myDrawer> has non-null shading aspect. More...

virtual void	PolygonOffsets (Standard_Integer &aMode, Standard_ShortReal &aFactor, Standard_ShortReal &aUnits) const
	Retrieves current polygon offsets settings from <myDrawer>. More...

virtual void	BoundingBox (Bnd_Box &theBndBox) override
	Returns bounding box of object correspondingly to its current display mode. More...

void	SetIsoOnTriangulation (const Standard_Boolean theIsEnabled)
	Enables or disables on-triangulation build of isolines according to the flag given. More...

void	SynchronizeAspects ()
	Synchronize presentation aspects after their modification. More...

Public Member Functions inherited from SelectMgr_SelectableObject
virtual	~SelectMgr_SelectableObject ()
	Clears all selections of the object. More...

void	RecomputePrimitives ()
	Re-computes the sensitive primitives for all modes. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection. More...

void	RecomputePrimitives (const Standard_Integer theMode)
	Re-computes the sensitive primitives which correspond to the <theMode>th selection mode. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection. More...

void	AddSelection (const Handle< SelectMgr_Selection > &aSelection, const Standard_Integer aMode)
	Adds the selection aSelection with the selection mode index aMode to this framework. More...

void	ClearSelections (const Standard_Boolean update=Standard_False)
	Empties all the selections in the SelectableObject <update> parameter defines whether all object's selections should be flagged for further update or not. This improved method can be used to recompute an object's selection (without redisplaying the object completely) when some selection mode is activated not for the first time. More...

const Handle< SelectMgr_Selection > &	Selection (const Standard_Integer aMode) const
	Returns the selection Selection having the selection mode aMode. More...

virtual Standard_Boolean	HasSelection (const Standard_Integer theMode) const
	Returns true if a selection corresponding to the selection mode theMode was computed for this object. More...

void	Init ()
	Begins the iteration scanning for sensitive primitives. More...

Standard_Boolean	More () const
	Continues the iteration scanning for sensitive primitives. More...

void	Next ()
	Continues the iteration scanning for sensitive primitives. More...

const Handle< SelectMgr_Selection > &	CurrentSelection () const
	Returns the current selection in this framework. More...

void	ResetTransformation () override
	resets local transformation to identity. More...

virtual void	UpdateTransformation () override
	Recomputes the location of the selection aSelection. More...

virtual void	UpdateTransformations (const Handle< SelectMgr_Selection > &aSelection)
	Updates locations in all sensitive entities from <aSelection> and in corresponding entity owners. More...

virtual void	HilightSelected (const Handle< PrsMgr_PresentationManager3d > &PM, const SelectMgr_SequenceOfOwner &Seq)
	Method which draws selected owners ( for fast presentation draw ) More...

virtual void	ClearSelected ()
	Method which clear all selected owners belonging to this selectable object ( for fast presentation draw ) More...

virtual void	HilightOwnerWithColor (const Handle< PrsMgr_PresentationManager3d > &thePM, const Handle< Graphic3d_HighlightStyle > &theStyle, const Handle< SelectMgr_EntityOwner > &theOwner)
	Method which hilight an owner belonging to this selectable object ( for fast presentation draw ) More...

virtual Standard_Boolean	IsAutoHilight () const
	If returns True, the old mechanism for highlighting selected objects is used (HilightSelected Method may be empty). If returns False, the HilightSelected method will be fully responsible for highlighting selected entity owners belonging to this selectable object. More...

virtual void	SetAutoHilight (const Standard_Boolean newAutoHilight)
	Set AutoHilight property to true or false Sets up Transform Persistence Mode for this object. More...

Handle< Prs3d_Presentation >	GetHilightPresentation (const Handle< PrsMgr_PresentationManager3d > &TheMgr)

Handle< Prs3d_Presentation >	GetSelectPresentation (const Handle< PrsMgr_PresentationManager3d > &TheMgr)

virtual void	SetZLayer (const Graphic3d_ZLayerId theLayerId) override
	Set Z layer ID and update all presentations of the selectable object. The layers mechanism allows drawing objects in higher layers in overlay of objects in lower layers. More...

void	UpdateSelection (const Standard_Integer theMode=-1)
	Sets update status FULL to selections of the object. Must be used as the only method of UpdateSelection from outer classes to prevent BVH structures from being outdated. More...

virtual void	SetAttributes (const Handle< Prs3d_Drawer > &theDrawer)
	Initializes the drawing tool theDrawer. More...

const Handle< Prs3d_Drawer > &	Attributes () const
	Returns the attributes settings. More...

virtual void	SetHilightAttributes (const Handle< Prs3d_Drawer > &theDrawer)
	Initializes the hilight drawing tool theDrawer. More...

const Handle< Prs3d_Drawer > &	HilightAttributes () const
	Returns the hilight attributes settings. More...

virtual void	UnsetHilightAttributes ()
	Clears settings provided by the hilight drawing tool theDrawer. More...

void	SetAssemblyOwner (const Handle< SelectMgr_EntityOwner > &theOwner, const Standard_Integer theMode=-1)
	Sets common entity owner for assembly sensitive object entities. More...

const Handle< SelectMgr_EntityOwner > &	GetAssemblyOwner () const
	Returns common entity owner if the object is an assembly. More...

Bnd_Box	BndBoxOfSelected (const Handle< SelectMgr_IndexedMapOfOwner > &theOwners)
	Returns a bounding box of sensitive entities with the owners given if they are a part of activated selection. More...

Standard_Integer	GlobalSelectionMode () const
	Returns the mode for selection of object as a whole. More...

virtual Handle< SelectMgr_EntityOwner >	GlobalSelOwner () const
	Returns the owner of mode for selection of object as a whole. More...

Public Member Functions inherited from PrsMgr_PresentableObject
PrsMgr_Presentations &	Presentations ()

PrsMgr_TypeOfPresentation3d	TypeOfPresentation3d () const
	Returns information on whether the object accepts display in HLR mode or not. More...

const Handle< Graphic3d_TransformPers > &	TransformPersistence () const

virtual void	SetTransformPersistence (const Handle< Graphic3d_TransformPers > &theTrsfPers)
	Sets up Transform Persistence for this object. More...

	Standard_DEPRECATED ("This method is deprecated - SetTransformPersistence() taking Graphic3d_TransformPers should be called instead") void SetTransformPersistence(const Graphic3d_TransModeFlags theMode
	Sets up Transform Persistence Mode for this object. This function used to lock in object position, rotation and / or zooming relative to camera position. Object will be drawn in the origin setted by thePoint parameter (except Graphic3d_TMF_TriedronPers flag. More...

void	SetTypeOfPresentation (const PrsMgr_TypeOfPresentation3d aType)

void	SetToUpdate (const Standard_Integer aMode)
	flags the Prs of mode <AMode> to be Updated. the Update will be done when needed. More...

void	SetToUpdate ()
	flags all the Presentations to be Updated. More...

void	ToBeUpdated (TColStd_ListOfInteger &ListOfMode) const
	gives the list of modes which are flagged "to be updated". More...

const Handle< Geom_Transformation > &	LocalTransformationGeom () const
	Return the local transformation. More...

void	SetLocalTransformation (const gp_Trsf &theTrsf)
	Sets local transformation to theTransformation. More...

void	SetLocalTransformation (const Handle< Geom_Transformation > &theTrsf)
	Sets local transformation to theTransformation. More...

Standard_Boolean	HasTransformation () const
	Returns true if object has a transformation that is different from the identity. More...

const Handle< Geom_Transformation > &	TransformationGeom () const
	Return the transformation taking into account transformation of parent object(s). More...

const gp_Trsf &	LocalTransformation () const
	Return the local transformation. More...

const gp_Trsf &	Transformation () const
	Return the transformation taking into account transformation of parent object(s). More...

const gp_GTrsf &	InversedTransformation () const

virtual void	UpdateTransformation (const Handle< Prs3d_Presentation > &P)

Graphic3d_ZLayerId	ZLayer () const
	Get ID of Z layer. More...

virtual void	AddClipPlane (const Handle< Graphic3d_ClipPlane > &thePlane)
	Adds clip plane for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be substracted from limit to predict the maximum possible number of object clipping planes. More...

virtual void	RemoveClipPlane (const Handle< Graphic3d_ClipPlane > &thePlane)
	Removes previously added clip plane. More...

virtual void	SetClipPlanes (const Handle< Graphic3d_SequenceOfHClipPlane > &thePlanes)
	Set clip planes for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be subtracted from limit to predict the maximum possible number of object clipping planes. More...

	Standard_DEPRECATED ("This method is deprecated - overload taking Handle should be used instead") void SetClipPlanes(const Graphic3d_SequenceOfHClipPlane &thePlanes)

const Handle< Graphic3d_SequenceOfHClipPlane > &	ClipPlanes () const
	Get clip planes. More...

virtual void	SetMutable (const Standard_Boolean theIsMutable)
	Sets if the object has mutable nature (content or location will be changed regularly). This method should be called before object displaying to take effect. More...

Standard_Boolean	IsMutable () const
	Returns true if object has mutable nature (content or location are be changed regularly). Mutable object will be managed in different way than static onces (another optimizations). More...

virtual void	AddChild (const Handle< PrsMgr_PresentableObject > &theObject)
	Makes theObject child of current object in scene hierarchy. More...

virtual void	RemoveChild (const Handle< PrsMgr_PresentableObject > &theObject)
	Removes theObject from children of current object in scene hierarchy. More...

const PrsMgr_ListOfPresentableObjects &	Children () const
	Returns children of the current object. More...

Standard_Boolean	HasOwnPresentations () const
	Returns true if object should have own presentations. More...

PrsMgr_PresentableObjectPointer	Parent () const
	Returns parent of current object in scene hierarchy. More...

Public Member Functions inherited from MMgt_TShared
virtual void	Delete () const override
	Memory deallocator for transient classes. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Static Public Member Functions
static TopAbs_ShapeEnum	SelectionType (const Standard_Integer aDecompositionMode)
	Activates the same TopAbs shape enumerations as those used by SelectionMode assigning a type to the mode aDecompositionMode. More...

static Standard_Integer	SelectionMode (const TopAbs_ShapeEnum aShapeType)
	Establishes an equivalence between a mode and the type, aShapeType, of selection. The correspondences are as follows: More...

Static Public Member Functions inherited from SelectMgr_SelectableObject
static void	InitDefaultHilightAttributes (const Handle< Prs3d_Drawer > &theDrawer)
	Initializes theDrawer by default hilight settings. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Protected Member Functions
virtual void	Compute (const Handle< PrsMgr_PresentationManager3d > &aPresentationManager, const Handle< Prs3d_Presentation > &aPresentation, const Standard_Integer aMode=0) override
	Calculates the 3D view aPresentation and its updates. The latter are managed by aPresentationManager. aPresentableObject has the display mode aMode; this has the default value of 0, that is, the wireframe display mode. More...

virtual void	Compute (const Handle< Prs3d_Projector > &aProjector, const Handle< Prs3d_Presentation > &aPresentation) override
	Calculates the 3D view aPresentation and its updates. The latter are managed by aPresentationManager. Each of the views in the viewer and every modification such as rotation, for example, entails recalculation. It must be redefined to implement hidden line removal for the object. The user never calls this method himself. This is done via the InteractiveContext object and is dependent on the point of view from which the object is displayed. More...

virtual void	Compute (const Handle< Prs3d_Projector > &aProjector, const Handle< Geom_Transformation > &aTrsf, const Handle< Prs3d_Presentation > &aPresentation) override
	Calculates the 3D view aPresentation and its updates. The latter are managed by aPresentationManager. A point of view is provided by the projector aProjector, and the geometric transformation which has transformed associated presentable objects is specified by aTrsf. This function is to be used in case where a hidden line removal display cannot be calculated automatically. This occurs when associated presentable objects have been transformed geometrically, but not translated. Warning The transformation aTrsf must be applied to the object before computation. More...

virtual void	ComputeSelection (const Handle< SelectMgr_Selection > &aSelection, const Standard_Integer aMode) override
	Recovers and calculates any sensitive primitive, aSelection, available in Shape mode, specified by aMode. As a rule, these are sensitive faces. This method is defined as virtual. This enables you to implement it in the creation of a new class of AIS Interactive Object. You need to do this and in so doing, redefine this method, if you create a class which enriches the list of signatures and types. More...

void	LoadRecomputable (const Standard_Integer TheMode)

void	setColor (const Handle< Prs3d_Drawer > &theDrawer, const Quantity_Color &theColor) const

void	setWidth (const Handle< Prs3d_Drawer > &theDrawer, const Standard_Real theWidth) const

void	setTransparency (const Handle< Prs3d_Drawer > &theDrawer, const Standard_Real theValue) const

void	setMaterial (const Handle< Prs3d_Drawer > &theDrawer, const Graphic3d_MaterialAspect &theMaterial, const Standard_Boolean theToKeepColor, const Standard_Boolean theToKeepTransp) const

Protected Member Functions inherited from AIS_InteractiveObject
	AIS_InteractiveObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)
	The TypeOfPresention3d means that the interactive object may have a presentation dependant of the view of Display. More...

Protected Member Functions inherited from SelectMgr_SelectableObject
	SelectMgr_SelectableObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)

void	setGlobalSelMode (const Standard_Integer theMode)

virtual void	updateSelection (const Standard_Integer theMode)

Protected Member Functions inherited from PrsMgr_PresentableObject
	PrsMgr_PresentableObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)

virtual	~PrsMgr_PresentableObject ()

void	Update (const Standard_Boolean AllModes=Standard_False)
	recomputes all presentations of the object. More...

void	Update (const Standard_Integer aMode, const Standard_Boolean ClearOther)
	Recomputes the presentation in the given mode. If ClearOther is true, other presentation will be cleared. More...

virtual void	Fill (const Handle< PrsMgr_PresentationManager > &aPresentationManager, const Handle< PrsMgr_Presentation > &aPresentation, const Standard_Integer aMode)
	High-level interface for controlling polygon offsets. More...

virtual void	SetCombinedParentTransform (const Handle< Geom_Transformation > &theTrsf)
	Sets myCombinedParentTransform to theTransformation. Thus object receives transformation from parent node and able to derive its own. More...

virtual void	UpdateClipping ()
	General virtual method for internal update of presentation state when some modifications on list of clip planes occurs. Base implementation propagate clip planes to every presentation. More...

virtual void	setLocalTransformation (const Handle< Geom_Transformation > &theTransformation)
	Sets local transformation to theTransformation. More...

Protected Attributes
TopoDS_Shape	myshape

Bnd_Box	myBB

Standard_Boolean	myCompBB

Protected Attributes inherited from AIS_InteractiveObject
Standard_Real	myTransparency

Quantity_Color	myOwnColor

Graphic3d_NameOfMaterial	myOwnMaterial

Standard_Integer	myHilightMode

Standard_Real	myOwnWidth

Standard_Boolean	myInfiniteState

Standard_Boolean	hasOwnColor

Standard_Boolean	hasOwnMaterial

Aspect_TypeOfFacingModel	myCurrentFacingModel

Standard_Boolean	myRecomputeEveryPrs

TColStd_ListOfInteger	myToRecomputeModes

Protected Attributes inherited from SelectMgr_SelectableObject
SelectMgr_SequenceOfSelection	myselections

Handle< Prs3d_Drawer >	myDrawer

Handle< Prs3d_Drawer >	myHilightDrawer

Handle< SelectMgr_EntityOwner >	myAssemblyOwner

Standard_Boolean	myAutoHilight

Protected Attributes inherited from PrsMgr_PresentableObject
PrsMgr_Presentations	myPresentations

PrsMgr_TypeOfPresentation3d	myTypeOfPresentation3d

Handle< Graphic3d_SequenceOfHClipPlane >	myClipPlanes

Standard_Boolean	myIsMutable

Graphic3d_ZLayerId	myZLayer

Standard_Boolean	myHasOwnPresentations

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Data Fields inherited from PrsMgr_PresentableObject
const gp_Pnt &	thePoint

Detailed Description

A framework to manage presentation and selection of shapes. AIS_Shape is the interactive object which is used the most by applications. There are standard functions available which allow you to prepare selection operations on the constituent elements of shapes - vertices, edges, faces etc - in an open local context. The selection modes specific to "Shape" type objects are referred to as Standard Activation Mode. These modes are only taken into account in open local context and only act on Interactive Objects which have redefined the virtual method AcceptShapeDecomposition so that it returns true. Several advanced functions are also available. These include functions to manage deviation angle and deviation coefficient - both HLR and non-HLR - of an inheriting shape class. These services allow you to select one type of shape interactive object for higher precision drawing. When you do this, the Prs3d_Drawer::IsOwn... functions corresponding to the above deviation angle and coefficient functions return true indicating that there is a local setting available for the specific object.

Constructor & Destructor Documentation

AIS_Shape::AIS_Shape ( const TopoDS_Shape & shap )

Initializes construction of the shape shap from wires, edges and vertices.

Member Function Documentation

virtual Standard_Boolean AIS_Shape::AcceptShapeDecomposition ( ) const

overridevirtual

Returns true if the Interactive Object accepts shape decomposition.

Reimplemented from AIS_InteractiveObject.

virtual const Bnd_Box& AIS_Shape::BoundingBox ( )

virtual

Constructs a bounding box with which to reconstruct compound topological shapes for presentation.

virtual Quantity_NameOfColor AIS_Shape::Color ( ) const

overridevirtual

Returns the NameOfColor attributes of the shape accordingly to the current facing model;.

Reimplemented from AIS_InteractiveObject.

virtual void AIS_Shape::Color ( Quantity_Color & aColor ) const

overridevirtual

Returns the Color attributes of the shape accordingly to the current facing model;.

Reimplemented from AIS_InteractiveObject.

virtual void AIS_Shape::Compute	(	const Handle< PrsMgr_PresentationManager3d > &	aPresentationManager,
		const Handle< Prs3d_Presentation > &	aPresentation,
		const Standard_Integer	aMode = `0`
	)

overrideprotectedvirtual

Calculates the 3D view aPresentation and its updates. The latter are managed by aPresentationManager. aPresentableObject has the display mode aMode; this has the default value of 0, that is, the wireframe display mode.

Reimplemented from PrsMgr_PresentableObject.

Reimplemented in AIS_TexturedShape, AIS_ColoredShape, and XCAFPrs_AISObject.

virtual void AIS_Shape::Compute	(	const Handle< Prs3d_Projector > &	aProjector,
		const Handle< Prs3d_Presentation > &	aPresentation
	)

overrideprotectedvirtual

Calculates the 3D view aPresentation and its updates. The latter are managed by aPresentationManager. Each of the views in the viewer and every modification such as rotation, for example, entails recalculation. It must be redefined to implement hidden line removal for the object. The user never calls this method himself. This is done via the InteractiveContext object and is dependent on the point of view from which the object is displayed.

Reimplemented from PrsMgr_PresentableObject.

virtual void AIS_Shape::Compute	(	const Handle< Prs3d_Projector > &	aProjector,
		const Handle< Geom_Transformation > &	aTrsf,
		const Handle< Prs3d_Presentation > &	aPresentation
	)

overrideprotectedvirtual

Calculates the 3D view aPresentation and its updates. The latter are managed by aPresentationManager. A point of view is provided by the projector aProjector, and the geometric transformation which has transformed associated presentable objects is specified by aTrsf. This function is to be used in case where a hidden line removal display cannot be calculated automatically. This occurs when associated presentable objects have been transformed geometrically, but not translated. Warning The transformation aTrsf must be applied to the object before computation.

Reimplemented from PrsMgr_PresentableObject.

virtual void AIS_Shape::ComputeSelection	(	const Handle< SelectMgr_Selection > &	aSelection,
		const Standard_Integer	aMode
	)

overrideprotectedvirtual

Recovers and calculates any sensitive primitive, aSelection, available in Shape mode, specified by aMode. As a rule, these are sensitive faces. This method is defined as virtual. This enables you to implement it in the creation of a new class of AIS Interactive Object. You need to do this and in so doing, redefine this method, if you create a class which enriches the list of signatures and types.

Implements SelectMgr_SelectableObject.

void AIS_Shape::LoadRecomputable ( const Standard_Integer TheMode )

protected

virtual Graphic3d_NameOfMaterial AIS_Shape::Material ( ) const

overridevirtual

Returns the NameOfMaterial attributes of the shape accordingly to the current facing model;.

Reimplemented from AIS_InteractiveObject.

Standard_Boolean AIS_Shape::OwnDeviationAngle	(	Standard_Real &	anAngle,
		Standard_Real &	aPreviousAngle
	)		const

Returns true and the values of the deviation angle anAngle and the previous deviation angle aPreviousAngle. If these values are not already set, false is returned.

Standard_Boolean AIS_Shape::OwnDeviationCoefficient	(	Standard_Real &	aCoefficient,
		Standard_Real &	aPreviousCoefficient
	)		const

Returns true and the values of the deviation coefficient aCoefficient and the previous deviation coefficient aPreviousCoefficient. If these values are not already set, false is returned.

Standard_Boolean AIS_Shape::OwnHLRDeviationAngle	(	Standard_Real &	anAngle,
		Standard_Real &	aPreviousAngle
	)		const

Returns true and the values of the HLR deviation angle anAngle and of the previous HLR deviation angle aPreviousAngle. If these values are not already set, false is returned.

Standard_Boolean AIS_Shape::OwnHLRDeviationCoefficient	(	Standard_Real &	aCoefficient,
		Standard_Real &	aPreviousCoefficient
	)		const

Returns true and the values of the HLR deviation coefficient aCoefficient and the previous HLR deviation coefficient aPreviousCoefficient. If these values are not already set, false is returned.

static Standard_Integer AIS_Shape::SelectionMode ( const TopAbs_ShapeEnum aShapeType )

static

Establishes an equivalence between a mode and the type, aShapeType, of selection. The correspondences are as follows:

mode 0 - Shape
mode 1 - Vertex
mode 2 - Edge
mode 3 - Wire
mode 4 - Face
mode 5 - Shell
mode 6 - Solid
mode 7 - Compsolid
mode 8 - Compound

static TopAbs_ShapeEnum AIS_Shape::SelectionType ( const Standard_Integer aDecompositionMode )

static

Activates the same TopAbs shape enumerations as those used by SelectionMode assigning a type to the mode aDecompositionMode.

void AIS_Shape::Set ( const TopoDS_Shape & ashap )

Constructs an instance of the shape object ashape.

void AIS_Shape::SetAngleAndDeviation ( const Standard_Real anAngle )

this compute a new angle and Deviation from the value anAngle and set the values stored in myDrawer with these that become local to the shape

virtual void AIS_Shape::SetColor ( const Quantity_NameOfColor aColor )

overridevirtual

Sets the color aColor in the reconstructed compound shape. Acts via the Drawer methods below on the appearance of:

free boundaries: Prs3d_Drawer_FreeBoundaryAspect,
isos: Prs3d_Drawer_UIsoAspect, Prs3dDrawer_VIsoAspect,
shared boundaries: Prs3d_Drawer_UnFreeBoundaryAspect,
shading: Prs3d_Drawer_ShadingAspect,
visible line color in hidden line mode: Prs3d_Drawer_SeenLineAspect
hidden line color in hidden line mode: Prs3d_Drawer_HiddenLineAspect.

Reimplemented from AIS_InteractiveObject.

virtual void AIS_Shape::SetColor ( const Quantity_Color & aColor )

overridevirtual

Reimplemented from AIS_InteractiveObject.

Reimplemented in AIS_TexturedShape, and AIS_ColoredShape.

void AIS_Shape::setColor	(	const Handle< Prs3d_Drawer > &	theDrawer,
		const Quantity_Color &	theColor
	)		const

protected

void AIS_Shape::SetHLRAngleAndDeviation ( const Standard_Real anAngle )

this compute a new Angle and Deviation from the value anAngle for HLR and set the values stored in myDrawer for with these that become local to the shape

virtual void AIS_Shape::SetMaterial ( const Graphic3d_NameOfMaterial aName )

overridevirtual

Sets the name aName for material defining this display attribute for the interactive object. Material aspect determines shading aspect, color and transparency of visible entities.

Reimplemented from AIS_InteractiveObject.

virtual void AIS_Shape::SetMaterial ( const Graphic3d_MaterialAspect & aName )

overridevirtual

Allows you to provide settings for the material aName in the reconstructed compound shape.

Reimplemented from AIS_InteractiveObject.

Reimplemented in AIS_TexturedShape, AIS_ColoredShape, and XCAFPrs_AISObject.

void AIS_Shape::setMaterial	(	const Handle< Prs3d_Drawer > &	theDrawer,
		const Graphic3d_MaterialAspect &	theMaterial,
		const Standard_Boolean	theToKeepColor,
		const Standard_Boolean	theToKeepTransp
	)		const

protected

Standard_Boolean AIS_Shape::SetOwnDeviationAngle ( )

Sets a local value for deviation angle for this specific shape.

void AIS_Shape::SetOwnDeviationAngle ( const Standard_Real anAngle )

sets myOwnDeviationAngle field in Prs3d_Drawer & recomputes presentation

Standard_Boolean AIS_Shape::SetOwnDeviationCoefficient ( )

Sets a local value for deviation coefficient for this specific shape.

void AIS_Shape::SetOwnDeviationCoefficient ( const Standard_Real aCoefficient )

Sets a local value for deviation coefficient for this specific shape.

Standard_Boolean AIS_Shape::SetOwnHLRDeviationAngle ( )

Sets a local value for HLR deviation angle for this specific shape.

void AIS_Shape::SetOwnHLRDeviationAngle ( const Standard_Real anAngle )

sets myOwnHLRDeviationAngle field in Prs3d_Drawer & recomputes presentation

Standard_Boolean AIS_Shape::SetOwnHLRDeviationCoefficient ( )

Sets a local value for HLR deviation coefficient for this specific shape.

void AIS_Shape::SetOwnHLRDeviationCoefficient ( const Standard_Real aCoefficient )

sets myOwnHLRDeviationCoefficient field in Prs3d_Drawer & recomputes presentation

virtual void AIS_Shape::SetTransparency ( const Standard_Real aValue = 0.6 )

overridevirtual

Sets the value aValue for transparency in the reconstructed compound shape.

Reimplemented from AIS_InteractiveObject.

Reimplemented in AIS_ColoredShape.

void AIS_Shape::setTransparency	(	const Handle< Prs3d_Drawer > &	theDrawer,
		const Standard_Real	theValue
	)		const

protected

void AIS_Shape::SetTypeOfHLR ( const Prs3d_TypeOfHLR theTypeOfHLR )

Sets the type of HLR algorithm used by the shape.

virtual void AIS_Shape::SetWidth ( const Standard_Real aValue )

overridevirtual

Sets the value aValue for line width in the reconstructed compound shape. Changes line aspects for lines-only presentation modes like Wireframe and Bounding Box. Doesn't change face boundary line aspect.

Reimplemented from AIS_InteractiveObject.

Reimplemented in AIS_ColoredShape.