Creates an arbitrary located instance of another Interactive Object, which serves as a reference. This allows you to use the Connected Interactive Object without having to recalculate presentation, selection or graphic structure. These are deduced from your reference object. The relation between the connected interactive object and its source is generally one of geometric transformation. AIS_ConnectedInteractive class supports selection mode 0 for any InteractiveObject and all standard modes if its reference based on AIS_Shape. Descendants may redefine ComputeSelection() though. Also ConnectedInteractive will handle HLR if its reference based on AIS_Shape. More...

#include <AIS_ConnectedInteractive.hxx>

Inheritance diagram for AIS_ConnectedInteractive:

[legend]

Public Member Functions
	AIS_ConnectedInteractive (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)
	Disconnects the previous view and sets highlight mode to 0. This highlights the wireframe presentation aTypeOfPresentation3d. Top_AllView deactivates hidden line removal. More...

virtual AIS_KindOfInteractive	Type () const override
	Returns KOI_Object. More...

virtual Standard_Integer	Signature () const override
	Returns 0. More...

void	Connect (const Handle< AIS_InteractiveObject > &theAnotherObj)
	Establishes the connection between the Connected Interactive Object, anotherIobj, and its reference. More...

void	Connect (const Handle< AIS_InteractiveObject > &theAnotherObj, const gp_Trsf &theLocation)
	Establishes the connection between the Connected Interactive Object, anotherIobj, and its reference. Locates instance in aLocation. More...

void	Connect (const Handle< AIS_InteractiveObject > &theAnotherObj, const Handle< Geom_Transformation > &theLocation)
	Establishes the connection between the Connected Interactive Object, anotherIobj, and its reference. Locates instance in aLocation. More...

Standard_Boolean	HasConnection () const
	Returns true if there is a connection established between the presentation and its source reference. More...

const Handle< AIS_InteractiveObject > &	ConnectedTo () const
	Returns the connection with the reference Interactive Object. More...

void	Disconnect ()
	Clears the connection with a source reference. The presentation will no longer be displayed. Warning Must be done before deleting the presentation. More...

virtual Standard_Boolean	AcceptShapeDecomposition () const override
	Informs the graphic context that the interactive Object may be decomposed into sub-shapes for dynamic selection. More...

virtual Standard_Boolean	AcceptDisplayMode (const Standard_Integer theMode) const override
	Return true if reference presentation accepts specified display mode. More...

Public Member Functions inherited from AIS_InteractiveObject
void	SetCurrentFacingModel (const Aspect_TypeOfFacingModel aModel=Aspect_TOFM_BOTH_SIDE)
	change the current facing model apply on polygons for SetColor(), SetTransparency(), SetMaterial() methods default facing model is Aspect_TOFM_TWO_SIDE. This mean that attributes is applying both on the front and back face. More...

Aspect_TypeOfFacingModel	CurrentFacingModel () const
	Returns the current facing model which is in effect. More...

virtual void	SetColor (const Quantity_Color &theColor)
	Only the interactive object knowns which Drawer attribute is affected by the color, if any (ex: for a wire,it's the wireaspect field of the drawer, but for a vertex, only the point aspect field is affected by the color). WARNING : Do not forget to set the corresponding fields here (hasOwnColor and myDrawer->SetColor()) More...

virtual void	UnsetColor ()
	Removes color settings. Only the Interactive Object knows which Drawer attribute is affected by the color setting. For a wire, for example, wire aspect is the attribute affected. For a vertex, however, only point aspect is affected by the color setting. More...

virtual void	SetWidth (const Standard_Real aValue)
	Allows you to provide the setting aValue for width. Only the Interactive Object knows which Drawer attribute is affected by the width setting. More...

virtual void	UnsetWidth ()

virtual Standard_Integer	DefaultDisplayMode () const
	Returns the default display mode. This method is to be implemented when the main mode is not mode 0. More...

void	Redisplay (const Standard_Boolean AllModes=Standard_False)
	Updates the active presentation; if <AllModes> = Standard_True all the presentations inside are recomputed. IMPORTANT: It is preferable to call Redisplay method of corresponding AIS_InteractiveContext instance for cases when it is accessible. This method just redirects call to myCTXPtr, so this class field must be up to date for proper result. More...

void	SetInfiniteState (const Standard_Boolean aFlag=Standard_True)
	Sets the infinite state flag aFlage. if <aFlag> = True , the interactiveObject is considered as infinite, i.e. its graphic presentations are not taken in account for View FitAll... More...

Standard_Boolean	IsInfinite () const
	Returns true if the interactive object is infinite. In this case, its graphic presentations are not taken into account in the fit-all view. More...

Standard_Boolean	HasInteractiveContext () const
	Indicates whether the Interactive Object has a pointer to an interactive context. More...

Handle< AIS_InteractiveContext >	GetContext () const
	Returns the context pointer to the interactive context. More...

virtual void	SetContext (const Handle< AIS_InteractiveContext > &aCtx)
	Sets the interactive context aCtx and provides a link to the default drawing tool or "Drawer" if there is none. More...

Standard_Boolean	HasOwner () const
	Returns true if the object has an owner attributed to it. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. More...

const Handle< Standard_Transient > &	GetOwner () const
	Returns the owner of the Interactive Object. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. There are two types of owners: More...

void	SetOwner (const Handle< Standard_Transient > &theApplicativeEntity)
	Allows you to attribute the owner theApplicativeEntity to an Interactive Object. This can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of. The owner takes the form of a transient. More...

void	ClearOwner ()
	Each Interactive Object has methods which allow us to attribute an Owner to it in the form of a Transient. This method removes the owner from the graphic entity. More...

Standard_Boolean	HasDisplayMode () const
	Returns true if the Interactive Object has a display mode setting. Otherwise, it is displayed in Neutral Point. More...

void	SetDisplayMode (const Standard_Integer aMode)
	Sets the display mode aMode for the interactive object. An object can have its own temporary display mode, which is different from that proposed by the interactive context. The range of possibilities currently proposed is the following: More...

void	UnsetDisplayMode ()
	Removes display mode settings from the interactive object. More...

Standard_Integer	DisplayMode () const
	Returns the display mode setting of the Interactive Object. The range of possibilities is the following: More...

Standard_Boolean	HasHilightMode () const
	Returns true if the Interactive Object is in highlight mode. More...

Standard_Integer	HilightMode () const
	Returns highlight display mode. This is obsolete method for backward compatibility - use ::HilightAttributes() and ::DynamicHilightAttributes() instead. More...

void	SetHilightMode (const Standard_Integer theMode)
	Sets highlight display mode. This is obsolete method for backward compatibility - use ::HilightAttributes() and ::DynamicHilightAttributes() instead. More...

void	UnsetHilightMode ()
	Unsets highlight display mode. More...

Standard_Boolean	HasColor () const
	Returns true if the Interactive Object has color. More...

virtual void	Color (Quantity_Color &theColor) const
	Returns the color setting of the Interactive Object. More...

Standard_Boolean	HasWidth () const
	Returns true if the Interactive Object has width. More...

Standard_Real	Width () const
	Returns the width setting of the Interactive Object. More...

Standard_Boolean	HasMaterial () const
	Returns true if the Interactive Object has a setting for material. More...

virtual Graphic3d_NameOfMaterial	Material () const
	Returns the current material setting. This will be on of the following materials: More...

virtual void	SetMaterial (const Graphic3d_MaterialAspect &aName)
	Sets the material aMat defining this display attribute for the interactive object. Material aspect determines shading aspect, color and transparency of visible entities. More...

virtual void	UnsetMaterial ()
	Removes the setting for material. More...

virtual void	SetTransparency (const Standard_Real aValue=0.6)
	Attributes a setting aValue for transparency. The transparency value should be between 0.0 and 1.0. At 0.0 an object will be totally opaque, and at 1.0, fully transparent. Warning At a value of 1.0, there may be nothing visible. More...

Standard_Boolean	IsTransparent () const
	Returns true if there is a transparency setting. More...

virtual Standard_Real	Transparency () const
	Returns the transparency setting. This will be between 0.0 and 1.0. At 0.0 an object will be totally opaque, and at 1.0, fully transparent. More...

virtual void	UnsetTransparency ()
	Removes the transparency setting. The object is opaque by default. More...

virtual void	UnsetAttributes () override
	Clears settings provided by the drawing tool aDrawer. More...

Standard_Boolean	HasPresentation () const
	Returns TRUE when this object has a presentation in the current DisplayMode() More...

Handle< Prs3d_Presentation >	Presentation () const
	Returns the current presentation of this object according to the current DisplayMode() More...

void	SetAspect (const Handle< Prs3d_BasicAspect > &anAspect)
	Sets the graphic basic aspect to the current presentation. More...

virtual void	SetPolygonOffsets (const Standard_Integer aMode, const Standard_ShortReal aFactor=1.0, const Standard_ShortReal aUnits=0.0)
	Sets up polygon offsets for this object. It modifies all existing presentations of <anObj> (if any), so it is reasonable to call this method after <anObj> has been displayed. Otherwise, Compute() method should pass Graphic3d_AspectFillArea3d aspect from <myDrawer> to Graphic3d_Group to make polygon offsets work. More...

virtual Standard_Boolean	HasPolygonOffsets () const
	Returns Standard_True if <myDrawer> has non-null shading aspect. More...

virtual void	PolygonOffsets (Standard_Integer &aMode, Standard_ShortReal &aFactor, Standard_ShortReal &aUnits) const
	Retrieves current polygon offsets settings from <myDrawer>. More...

virtual void	BoundingBox (Bnd_Box &theBndBox) override
	Returns bounding box of object correspondingly to its current display mode. More...

void	SetIsoOnTriangulation (const Standard_Boolean theIsEnabled)
	Enables or disables on-triangulation build of isolines according to the flag given. More...

void	SynchronizeAspects ()
	Synchronize presentation aspects after their modification. More...

Public Member Functions inherited from SelectMgr_SelectableObject
virtual	~SelectMgr_SelectableObject ()
	Clears all selections of the object. More...

void	RecomputePrimitives ()
	Re-computes the sensitive primitives for all modes. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection. More...

void	RecomputePrimitives (const Standard_Integer theMode)
	Re-computes the sensitive primitives which correspond to the <theMode>th selection mode. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection. More...

void	AddSelection (const Handle< SelectMgr_Selection > &aSelection, const Standard_Integer aMode)
	Adds the selection aSelection with the selection mode index aMode to this framework. More...

void	ClearSelections (const Standard_Boolean update=Standard_False)
	Empties all the selections in the SelectableObject <update> parameter defines whether all object's selections should be flagged for further update or not. This improved method can be used to recompute an object's selection (without redisplaying the object completely) when some selection mode is activated not for the first time. More...

const Handle< SelectMgr_Selection > &	Selection (const Standard_Integer aMode) const
	Returns the selection Selection having the selection mode aMode. More...

virtual Standard_Boolean	HasSelection (const Standard_Integer theMode) const
	Returns true if a selection corresponding to the selection mode theMode was computed for this object. More...

void	Init ()
	Begins the iteration scanning for sensitive primitives. More...

Standard_Boolean	More () const
	Continues the iteration scanning for sensitive primitives. More...

void	Next ()
	Continues the iteration scanning for sensitive primitives. More...

const Handle< SelectMgr_Selection > &	CurrentSelection () const
	Returns the current selection in this framework. More...

void	ResetTransformation () override
	resets local transformation to identity. More...

virtual void	UpdateTransformation () override
	Recomputes the location of the selection aSelection. More...

virtual void	UpdateTransformations (const Handle< SelectMgr_Selection > &aSelection)
	Updates locations in all sensitive entities from <aSelection> and in corresponding entity owners. More...

virtual void	HilightSelected (const Handle< PrsMgr_PresentationManager3d > &PM, const SelectMgr_SequenceOfOwner &Seq)
	Method which draws selected owners ( for fast presentation draw ) More...

virtual void	ClearSelected ()
	Method which clear all selected owners belonging to this selectable object ( for fast presentation draw ) More...

virtual void	ClearDynamicHighlight (const Handle< PrsMgr_PresentationManager3d > &theMgr)
	Method that needs to be implemented when the object manages selection and dynamic highlighting on its own. Clears or invalidates dynamic highlight presentation. By default it clears immediate draw of given presentation manager. More...

virtual void	HilightOwnerWithColor (const Handle< PrsMgr_PresentationManager3d > &thePM, const Handle< Prs3d_Drawer > &theStyle, const Handle< SelectMgr_EntityOwner > &theOwner)
	Method which hilight an owner belonging to this selectable object ( for fast presentation draw ) More...

virtual Standard_Boolean	IsAutoHilight () const
	If returns True, the old mechanism for highlighting selected objects is used (HilightSelected Method may be empty). If returns False, the HilightSelected method will be fully responsible for highlighting selected entity owners belonging to this selectable object. More...

virtual void	SetAutoHilight (const Standard_Boolean newAutoHilight)
	Set AutoHilight property to true or false Sets up Transform Persistence Mode for this object. More...

Handle< Prs3d_Presentation >	GetHilightPresentation (const Handle< PrsMgr_PresentationManager3d > &TheMgr)

Handle< Prs3d_Presentation >	GetSelectPresentation (const Handle< PrsMgr_PresentationManager3d > &TheMgr)

virtual void	ErasePresentations (Standard_Boolean theToRemove)
	Removes presentations returned by GetHilightPresentation() and GetSelectPresentation(). More...

virtual void	SetZLayer (const Graphic3d_ZLayerId theLayerId) override
	Set Z layer ID and update all presentations of the selectable object. The layers mechanism allows drawing objects in higher layers in overlay of objects in lower layers. More...

void	UpdateSelection (const Standard_Integer theMode=-1)
	Sets update status FULL to selections of the object. Must be used as the only method of UpdateSelection from outer classes to prevent BVH structures from being outdated. More...

void	SetAssemblyOwner (const Handle< SelectMgr_EntityOwner > &theOwner, const Standard_Integer theMode=-1)
	Sets common entity owner for assembly sensitive object entities. More...

const Handle< SelectMgr_EntityOwner > &	GetAssemblyOwner () const
	Returns common entity owner if the object is an assembly. More...

Bnd_Box	BndBoxOfSelected (const Handle< SelectMgr_IndexedMapOfOwner > &theOwners)
	Returns a bounding box of sensitive entities with the owners given if they are a part of activated selection. More...

Standard_Integer	GlobalSelectionMode () const
	Returns the mode for selection of object as a whole. More...

virtual Handle< SelectMgr_EntityOwner >	GlobalSelOwner () const
	Returns the owner of mode for selection of object as a whole. More...

Public Member Functions inherited from PrsMgr_PresentableObject
PrsMgr_Presentations &	Presentations ()

PrsMgr_TypeOfPresentation3d	TypeOfPresentation3d () const
	Returns information on whether the object accepts display in HLR mode or not. More...

const Handle< Graphic3d_TransformPers > &	TransformPersistence () const

virtual void	SetTransformPersistence (const Handle< Graphic3d_TransformPers > &theTrsfPers)
	Sets up Transform Persistence for this object. More...

	Standard_DEPRECATED ("This method is deprecated - SetTransformPersistence() taking Graphic3d_TransformPers should be called instead") void SetTransformPersistence(const Graphic3d_TransModeFlags theMode
	Sets up Transform Persistence Mode for this object. This function used to lock in object position, rotation and / or zooming relative to camera position. Object will be drawn in the origin setted by thePoint parameter (except Graphic3d_TMF_TriedronPers flag. More...

void	SetTypeOfPresentation (const PrsMgr_TypeOfPresentation3d aType)

void	SetToUpdate (const Standard_Integer aMode)
	flags the Prs of mode <AMode> to be Updated. the Update will be done when needed. More...

void	SetToUpdate ()
	flags all the Presentations to be Updated. More...

void	ToBeUpdated (TColStd_ListOfInteger &ListOfMode) const
	gives the list of modes which are flagged "to be updated". More...

const Handle< Geom_Transformation > &	LocalTransformationGeom () const
	Return the local transformation. More...

void	SetLocalTransformation (const gp_Trsf &theTrsf)
	Sets local transformation to theTransformation. More...

void	SetLocalTransformation (const Handle< Geom_Transformation > &theTrsf)
	Sets local transformation to theTransformation. More...

Standard_Boolean	HasTransformation () const
	Returns true if object has a transformation that is different from the identity. More...

const Handle< Geom_Transformation > &	TransformationGeom () const
	Return the transformation taking into account transformation of parent object(s). More...

const gp_Trsf &	LocalTransformation () const
	Return the local transformation. More...

const gp_Trsf &	Transformation () const
	Return the transformation taking into account transformation of parent object(s). More...

const gp_GTrsf &	InversedTransformation () const

virtual void	UpdateTransformation (const Handle< Prs3d_Presentation > &P)

Graphic3d_ZLayerId	ZLayer () const
	Get ID of Z layer. More...

virtual void	AddClipPlane (const Handle< Graphic3d_ClipPlane > &thePlane)
	Adds clip plane for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be substracted from limit to predict the maximum possible number of object clipping planes. More...

virtual void	RemoveClipPlane (const Handle< Graphic3d_ClipPlane > &thePlane)
	Removes previously added clip plane. More...

virtual void	SetClipPlanes (const Handle< Graphic3d_SequenceOfHClipPlane > &thePlanes)
	Set clip planes for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be subtracted from limit to predict the maximum possible number of object clipping planes. More...

	Standard_DEPRECATED ("This method is deprecated - overload taking Handle should be used instead") void SetClipPlanes(const Graphic3d_SequenceOfHClipPlane &thePlanes)

const Handle< Graphic3d_SequenceOfHClipPlane > &	ClipPlanes () const
	Get clip planes. More...

virtual void	SetMutable (const Standard_Boolean theIsMutable)
	Sets if the object has mutable nature (content or location will be changed regularly). This method should be called before object displaying to take effect. More...

Standard_Boolean	IsMutable () const
	Returns true if object has mutable nature (content or location are be changed regularly). Mutable object will be managed in different way than static onces (another optimizations). More...

virtual void	AddChild (const Handle< PrsMgr_PresentableObject > &theObject)
	Makes theObject child of current object in scene hierarchy. More...

virtual void	RemoveChild (const Handle< PrsMgr_PresentableObject > &theObject)
	Removes theObject from children of current object in scene hierarchy. More...

const PrsMgr_ListOfPresentableObjects &	Children () const
	Returns children of the current object. More...

Standard_Boolean	HasOwnPresentations () const
	Returns true if object should have own presentations. More...

PrsMgr_PresentableObjectPointer	Parent () const
	Returns parent of current object in scene hierarchy. More...

virtual void	SetAttributes (const Handle< Prs3d_Drawer > &theDrawer)
	Initializes the drawing tool theDrawer. More...

const Handle< Prs3d_Drawer > &	Attributes () const
	Returns the attributes settings. More...

const Handle< Prs3d_Drawer > &	HilightAttributes () const
	Returns the hilight attributes settings. When not NULL, overrides both Prs3d_TypeOfHighlight_LocalSelected and Prs3d_TypeOfHighlight_Selected defined within AIS_InteractiveContext. More...

virtual void	SetHilightAttributes (const Handle< Prs3d_Drawer > &theDrawer)
	Initializes the hilight drawing tool theDrawer. More...

const Handle< Prs3d_Drawer > &	DynamicHilightAttributes () const
	Returns the hilight attributes settings. When not NULL, overrides both Prs3d_TypeOfHighlight_LocalDynamic and Prs3d_TypeOfHighlight_Dynamic defined within AIS_InteractiveContext. More...

virtual void	SetDynamicHilightAttributes (const Handle< Prs3d_Drawer > &theDrawer)
	Initializes the dynamic hilight drawing tool. More...

virtual void	UnsetHilightAttributes ()
	Clears settings provided by the hilight drawing tool theDrawer. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Protected Member Functions
virtual void	Compute (const Handle< PrsMgr_PresentationManager3d > &aPresentationManager, const Handle< Prs3d_Presentation > &aPresentation, const Standard_Integer aMode) override
	Calculates the view aPresentation and its updates. The latter are managed by aPresentationManager. The display mode aMode is 0 by default. this method is redefined virtual; when the instance is connected to another InteractiveObject,this method doesn't compute anything, but just uses the presentation of this last object, with a transformation if there's one stored. More...

virtual void	Compute (const Handle< Prs3d_Projector > &aProjector, const Handle< Geom_Transformation > &aTrsf, const Handle< Prs3d_Presentation > &aPresentation) override
	Computes the presentation according to a point of view given by <aProjector>. To be Used when the associated degenerated Presentations have been transformed by <aTrsf> which is not a Pure Translation. The HLR Prs can't be deducted automatically WARNING :<aTrsf> must be applied to the object to display before computation !!! More...

virtual void	Compute (const Handle< Prs3d_Projector > &aProjector, const Handle< Prs3d_Presentation > &aPresentation) override
	Computes the presentation according to a point of view given by <aProjector>. More...

virtual void	ComputeSelection (const Handle< SelectMgr_Selection > &theSelection, const Standard_Integer theMode) override
	Generates sensitive entities by copying them from myReference selection, creates and sets an entity owner for this entities and adds them to theSelection. More...

void	computeSubShapeSelection (const Handle< SelectMgr_Selection > &theSelection, const Standard_Integer theMode)
	Generates sensitive entities by copying them from myReference sub shapes selection, creates and sets an entity owner for this entities and adds them to theSelection. More...

void	updateShape (const Standard_Boolean WithLocation=Standard_True)

void	Compute (const Handle< Prs3d_Projector > &aProjector, const Handle< Prs3d_Presentation > &aPresentation, const TopoDS_Shape &aShape)
	Computes the presentation according to a point of view given by <aProjector>. More...

void	connect (const Handle< AIS_InteractiveObject > &theAnotherObj, const Handle< Geom_Transformation > &theLocation)

Protected Member Functions inherited from AIS_InteractiveObject
	AIS_InteractiveObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)
	The TypeOfPresention3d means that the interactive object may have a presentation dependant of the view of Display. More...

Protected Member Functions inherited from SelectMgr_SelectableObject
	SelectMgr_SelectableObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)

void	setGlobalSelMode (const Standard_Integer theMode)

virtual void	updateSelection (const Standard_Integer theMode)

Protected Member Functions inherited from PrsMgr_PresentableObject
	PrsMgr_PresentableObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)

virtual	~PrsMgr_PresentableObject ()

void	Update (const Standard_Boolean AllModes=Standard_False)
	recomputes all presentations of the object. More...

void	Update (const Standard_Integer aMode, const Standard_Boolean ClearOther)
	Recomputes the presentation in the given mode. If ClearOther is true, other presentation will be cleared. More...

virtual void	Fill (const Handle< PrsMgr_PresentationManager > &aPresentationManager, const Handle< PrsMgr_Presentation > &aPresentation, const Standard_Integer aMode)
	High-level interface for controlling polygon offsets. More...

virtual void	SetCombinedParentTransform (const Handle< Geom_Transformation > &theTrsf)
	Sets myCombinedParentTransform to theTransformation. Thus object receives transformation from parent node and able to derive its own. More...

virtual void	UpdateClipping ()
	General virtual method for internal update of presentation state when some modifications on list of clip planes occurs. Base implementation propagate clip planes to every presentation. More...

virtual void	setLocalTransformation (const Handle< Geom_Transformation > &theTransformation)
	Sets local transformation to theTransformation. More...

Protected Attributes
Handle< AIS_InteractiveObject >	myReference

TopoDS_Shape	myShape

Protected Attributes inherited from AIS_InteractiveObject
TColStd_ListOfInteger	myToRecomputeModes

Standard_Real	myOwnWidth

Aspect_TypeOfFacingModel	myCurrentFacingModel

Standard_Boolean	myInfiniteState

Standard_Boolean	hasOwnColor

Standard_Boolean	hasOwnMaterial

Standard_Boolean	myRecomputeEveryPrs

Protected Attributes inherited from SelectMgr_SelectableObject
SelectMgr_SequenceOfSelection	myselections

Handle< SelectMgr_EntityOwner >	myAssemblyOwner

Handle< Prs3d_Presentation >	mySelectionPrs

Handle< Prs3d_Presentation >	myHilightPrs

Standard_Boolean	myAutoHilight

Protected Attributes inherited from PrsMgr_PresentableObject
PrsMgr_Presentations	myPresentations

Handle< Graphic3d_SequenceOfHClipPlane >	myClipPlanes

Handle< Prs3d_Drawer >	myDrawer

Handle< Prs3d_Drawer >	myHilightDrawer

Handle< Prs3d_Drawer >	myDynHilightDrawer

PrsMgr_TypeOfPresentation3d	myTypeOfPresentation3d

Standard_Boolean	myIsMutable

Standard_Boolean	myHasOwnPresentations

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Data Fields inherited from PrsMgr_PresentableObject
const gp_Pnt &	thePoint

Detailed Description

Creates an arbitrary located instance of another Interactive Object, which serves as a reference. This allows you to use the Connected Interactive Object without having to recalculate presentation, selection or graphic structure. These are deduced from your reference object. The relation between the connected interactive object and its source is generally one of geometric transformation. AIS_ConnectedInteractive class supports selection mode 0 for any InteractiveObject and all standard modes if its reference based on AIS_Shape. Descendants may redefine ComputeSelection() though. Also ConnectedInteractive will handle HLR if its reference based on AIS_Shape.

Constructor & Destructor Documentation

◆ AIS_ConnectedInteractive()

AIS_ConnectedInteractive::AIS_ConnectedInteractive ( const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d = PrsMgr_TOP_AllView )

Disconnects the previous view and sets highlight mode to 0. This highlights the wireframe presentation aTypeOfPresentation3d. Top_AllView deactivates hidden line removal.

Member Function Documentation

◆ AcceptDisplayMode()

virtual Standard_Boolean AIS_ConnectedInteractive::AcceptDisplayMode ( const Standard_Integer theMode ) const

inlineoverridevirtual

Return true if reference presentation accepts specified display mode.

Reimplemented from AIS_InteractiveObject.

◆ AcceptShapeDecomposition()

virtual Standard_Boolean AIS_ConnectedInteractive::AcceptShapeDecomposition ( ) const

inlineoverridevirtual

Informs the graphic context that the interactive Object may be decomposed into sub-shapes for dynamic selection.

Reimplemented from AIS_InteractiveObject.

◆ Compute() [1/4]

virtual void AIS_ConnectedInteractive::Compute	(	const Handle< PrsMgr_PresentationManager3d > &	aPresentationManager,
		const Handle< Prs3d_Presentation > &	aPresentation,
		const Standard_Integer	aMode
	)

overrideprotectedvirtual

Calculates the view aPresentation and its updates. The latter are managed by aPresentationManager. The display mode aMode is 0 by default. this method is redefined virtual; when the instance is connected to another InteractiveObject,this method doesn't compute anything, but just uses the presentation of this last object, with a transformation if there's one stored.

Reimplemented from PrsMgr_PresentableObject.

◆ Compute() [2/4]

virtual void AIS_ConnectedInteractive::Compute	(	const Handle< Prs3d_Projector > &	aProjector,
		const Handle< Geom_Transformation > &	aTrsf,
		const Handle< Prs3d_Presentation > &	aPresentation
	)

overrideprotectedvirtual

Computes the presentation according to a point of view given by <aProjector>. To be Used when the associated degenerated Presentations have been transformed by <aTrsf> which is not a Pure Translation. The HLR Prs can't be deducted automatically WARNING :<aTrsf> must be applied to the object to display before computation !!!

Reimplemented from PrsMgr_PresentableObject.

◆ Compute() [3/4]

virtual void AIS_ConnectedInteractive::Compute	(	const Handle< Prs3d_Projector > &	aProjector,
		const Handle< Prs3d_Presentation > &	aPresentation
	)

overrideprotectedvirtual

Computes the presentation according to a point of view given by <aProjector>.

Reimplemented from PrsMgr_PresentableObject.

◆ Compute() [4/4]

void AIS_ConnectedInteractive::Compute	(	const Handle< Prs3d_Projector > &	aProjector,
		const Handle< Prs3d_Presentation > &	aPresentation,
		const TopoDS_Shape &	aShape
	)

protected

Computes the presentation according to a point of view given by <aProjector>.

◆ ComputeSelection()

virtual void AIS_ConnectedInteractive::ComputeSelection	(	const Handle< SelectMgr_Selection > &	theSelection,
		const Standard_Integer	theMode
	)

overrideprotectedvirtual

Generates sensitive entities by copying them from myReference selection, creates and sets an entity owner for this entities and adds them to theSelection.

Implements SelectMgr_SelectableObject.

◆ computeSubShapeSelection()

void AIS_ConnectedInteractive::computeSubShapeSelection	(	const Handle< SelectMgr_Selection > &	theSelection,
		const Standard_Integer	theMode
	)

protected

Generates sensitive entities by copying them from myReference sub shapes selection, creates and sets an entity owner for this entities and adds them to theSelection.

◆ Connect() [1/3]

void AIS_ConnectedInteractive::Connect ( const Handle< AIS_InteractiveObject > & theAnotherObj )

inline

Establishes the connection between the Connected Interactive Object, anotherIobj, and its reference.

◆ Connect() [2/3]

void AIS_ConnectedInteractive::Connect	(	const Handle< AIS_InteractiveObject > &	theAnotherObj,
		const gp_Trsf &	theLocation
	)

inline

Establishes the connection between the Connected Interactive Object, anotherIobj, and its reference. Locates instance in aLocation.

◆ Connect() [3/3]

void AIS_ConnectedInteractive::Connect	(	const Handle< AIS_InteractiveObject > &	theAnotherObj,
		const Handle< Geom_Transformation > &	theLocation
	)

inline

Establishes the connection between the Connected Interactive Object, anotherIobj, and its reference. Locates instance in aLocation.

◆ connect()

void AIS_ConnectedInteractive::connect	(	const Handle< AIS_InteractiveObject > &	theAnotherObj,
		const Handle< Geom_Transformation > &	theLocation
	)

protected

◆ ConnectedTo()

const Handle< AIS_InteractiveObject >& AIS_ConnectedInteractive::ConnectedTo ( ) const

inline

Returns the connection with the reference Interactive Object.

◆ Disconnect()

void AIS_ConnectedInteractive::Disconnect ( )

Clears the connection with a source reference. The presentation will no longer be displayed. Warning Must be done before deleting the presentation.

◆ HasConnection()

Standard_Boolean AIS_ConnectedInteractive::HasConnection ( ) const

inline

Returns true if there is a connection established between the presentation and its source reference.

◆ Signature()

virtual Standard_Integer AIS_ConnectedInteractive::Signature ( ) const

inlineoverridevirtual

Returns 0.

Reimplemented from AIS_InteractiveObject.

◆ Type()

virtual AIS_KindOfInteractive AIS_ConnectedInteractive::Type ( ) const

inlineoverridevirtual

Returns KOI_Object.

Reimplemented from AIS_InteractiveObject.

◆ updateShape()

void AIS_ConnectedInteractive::updateShape ( const Standard_Boolean WithLocation = Standard_True )

protected

Field Documentation

◆ myReference

Handle< AIS_InteractiveObject > AIS_ConnectedInteractive::myReference

protected

◆ myShape

TopoDS_Shape AIS_ConnectedInteractive::myShape

protected

The documentation for this class was generated from the following file:

AIS_ConnectedInteractive.hxx

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ AIS_ConnectedInteractive()

Member Function Documentation

◆ AcceptDisplayMode()

◆ AcceptShapeDecomposition()

◆ Compute() [1/4]

◆ Compute() [2/4]

◆ Compute() [3/4]

◆ Compute() [4/4]

◆ ComputeSelection()

◆ computeSubShapeSelection()

◆ Connect() [1/3]

◆ Connect() [2/3]

◆ Connect() [3/3]

◆ connect()

◆ ConnectedTo()

◆ Disconnect()

◆ HasConnection()

◆ Signature()

◆ Type()

◆ updateShape()

Field Documentation

◆ myReference

◆ myShape