Defines an isoparametric curve on a surface. The type of isoparametric curve (U or V) is defined with the enumeration IsoType from GeomAbs if NoneIso is given an error is raised. More...

#include <Adaptor3d_IsoCurve.hxx>

Inheritance diagram for Adaptor3d_IsoCurve:

[legend]

Public Member Functions
	Adaptor3d_IsoCurve ()
	The iso is set to NoneIso. More...

	Adaptor3d_IsoCurve (const Handle< Adaptor3d_HSurface > &S)
	The surface is loaded. The iso is set to NoneIso. More...

	Adaptor3d_IsoCurve (const Handle< Adaptor3d_HSurface > &S, const GeomAbs_IsoType Iso, const Standard_Real Param)
	Creates an IsoCurve curve. Iso defines the type (isoU or isoU) Param defines the value of the iso. The bounds of the iso are the bounds of the surface. More...

	Adaptor3d_IsoCurve (const Handle< Adaptor3d_HSurface > &S, const GeomAbs_IsoType Iso, const Standard_Real Param, const Standard_Real WFirst, const Standard_Real WLast)
	Create an IsoCurve curve. Iso defines the type (isoU or isov). Param defines the value of the iso. WFirst,WLast define the bounds of the iso. More...

void	Load (const Handle< Adaptor3d_HSurface > &S)
	Changes the surface. The iso is reset to NoneIso. More...

void	Load (const GeomAbs_IsoType Iso, const Standard_Real Param)
	Changes the iso on the current surface. More...

void	Load (const GeomAbs_IsoType Iso, const Standard_Real Param, const Standard_Real WFirst, const Standard_Real WLast)
	Changes the iso on the current surface. More...

const Handle< Adaptor3d_HSurface > &	Surface () const

GeomAbs_IsoType	Iso () const

Standard_Real	Parameter () const

Standard_Real	FirstParameter () const override

Standard_Real	LastParameter () const override

GeomAbs_Shape	Continuity () const override

Standard_Integer	NbIntervals (const GeomAbs_Shape S) const override
	Returns the number of intervals for continuity <S>. May be one if Continuity(me) >= <S> More...

void	Intervals (TColStd_Array1OfReal &T, const GeomAbs_Shape S) const override
	Stores in <T> the parameters bounding the intervals of continuity <S>. More...

Handle< Adaptor3d_HCurve >	Trim (const Standard_Real First, const Standard_Real Last, const Standard_Real Tol) const override
	Returns a curve equivalent of <me> between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last> More...

Standard_Boolean	IsClosed () const override

Standard_Boolean	IsPeriodic () const override

Standard_Real	Period () const override

gp_Pnt	Value (const Standard_Real U) const override
	Computes the point of parameter U on the curve. More...

void	D0 (const Standard_Real U, gp_Pnt &P) const override
	Computes the point of parameter U on the curve. More...

void	D1 (const Standard_Real U, gp_Pnt &P, gp_Vec &V) const override
	Computes the point of parameter U on the curve with its first derivative. Raised if the continuity of the current interval is not C1. More...

void	D2 (const Standard_Real U, gp_Pnt &P, gp_Vec &V1, gp_Vec &V2) const override
	Returns the point P of parameter U, the first and second derivatives V1 and V2. Raised if the continuity of the current interval is not C2. More...

void	D3 (const Standard_Real U, gp_Pnt &P, gp_Vec &V1, gp_Vec &V2, gp_Vec &V3) const override
	Returns the point P of parameter U, the first, the second and the third derivative. Raised if the continuity of the current interval is not C3. More...

gp_Vec	DN (const Standard_Real U, const Standard_Integer N) const override
	The returned vector gives the value of the derivative for the order of derivation N. Raised if the continuity of the current interval is not CN. Raised if N < 1. More...

Standard_Real	Resolution (const Standard_Real R3d) const override
	Returns the parametric resolution corresponding to the real space resolution <R3d>. More...

GeomAbs_CurveType	GetType () const override
	Returns the type of the curve in the current interval : Line, Circle, Ellipse, Hyperbola, Parabola, BezierCurve, BSplineCurve, OtherCurve. More...

gp_Lin	Line () const override

gp_Circ	Circle () const override

gp_Elips	Ellipse () const override

gp_Hypr	Hyperbola () const override

gp_Parab	Parabola () const override

Standard_Integer	Degree () const override

Standard_Boolean	IsRational () const override

Standard_Integer	NbPoles () const override

Standard_Integer	NbKnots () const override

Handle< Geom_BezierCurve >	Bezier () const override

Handle< Geom_BSplineCurve >	BSpline () const override

Public Member Functions inherited from Adaptor3d_Curve
virtual Handle< Geom_OffsetCurve >	OffsetCurve () const

virtual	~Adaptor3d_Curve ()

Detailed Description

Defines an isoparametric curve on a surface. The type of isoparametric curve (U or V) is defined with the enumeration IsoType from GeomAbs if NoneIso is given an error is raised.

Constructor & Destructor Documentation

◆ Adaptor3d_IsoCurve() [1/4]

Adaptor3d_IsoCurve::Adaptor3d_IsoCurve ( )

The iso is set to NoneIso.

◆ Adaptor3d_IsoCurve() [2/4]

Adaptor3d_IsoCurve::Adaptor3d_IsoCurve ( const Handle< Adaptor3d_HSurface > & S )

The surface is loaded. The iso is set to NoneIso.

◆ Adaptor3d_IsoCurve() [3/4]

Adaptor3d_IsoCurve::Adaptor3d_IsoCurve	(	const Handle< Adaptor3d_HSurface > &	S,
		const GeomAbs_IsoType	Iso,
		const Standard_Real	Param
	)

Creates an IsoCurve curve. Iso defines the type (isoU or isoU) Param defines the value of the iso. The bounds of the iso are the bounds of the surface.

◆ Adaptor3d_IsoCurve() [4/4]

Adaptor3d_IsoCurve::Adaptor3d_IsoCurve	(	const Handle< Adaptor3d_HSurface > &	S,
		const GeomAbs_IsoType	Iso,
		const Standard_Real	Param,
		const Standard_Real	WFirst,
		const Standard_Real	WLast
	)

Create an IsoCurve curve. Iso defines the type (isoU or isov). Param defines the value of the iso. WFirst,WLast define the bounds of the iso.

Member Function Documentation

◆ Bezier()

Handle< Geom_BezierCurve > Adaptor3d_IsoCurve::Bezier ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ BSpline()

Handle< Geom_BSplineCurve > Adaptor3d_IsoCurve::BSpline ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Circle()

gp_Circ Adaptor3d_IsoCurve::Circle ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Continuity()

GeomAbs_Shape Adaptor3d_IsoCurve::Continuity ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ D0()

void Adaptor3d_IsoCurve::D0	(	const Standard_Real	U,
		gp_Pnt &	P
	)		const

overridevirtual

Computes the point of parameter U on the curve.

Reimplemented from Adaptor3d_Curve.

◆ D1()

void Adaptor3d_IsoCurve::D1	(	const Standard_Real	U,
		gp_Pnt &	P,
		gp_Vec &	V
	)		const

overridevirtual

Computes the point of parameter U on the curve with its first derivative. Raised if the continuity of the current interval is not C1.

Reimplemented from Adaptor3d_Curve.

◆ D2()

void Adaptor3d_IsoCurve::D2	(	const Standard_Real	U,
		gp_Pnt &	P,
		gp_Vec &	V1,
		gp_Vec &	V2
	)		const

overridevirtual

Returns the point P of parameter U, the first and second derivatives V1 and V2. Raised if the continuity of the current interval is not C2.

Reimplemented from Adaptor3d_Curve.

◆ D3()

void Adaptor3d_IsoCurve::D3	(	const Standard_Real	U,
		gp_Pnt &	P,
		gp_Vec &	V1,
		gp_Vec &	V2,
		gp_Vec &	V3
	)		const

overridevirtual

Returns the point P of parameter U, the first, the second and the third derivative. Raised if the continuity of the current interval is not C3.

Reimplemented from Adaptor3d_Curve.

◆ Degree()

Standard_Integer Adaptor3d_IsoCurve::Degree ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ DN()

gp_Vec Adaptor3d_IsoCurve::DN	(	const Standard_Real	U,
		const Standard_Integer	N
	)		const

overridevirtual

The returned vector gives the value of the derivative for the order of derivation N. Raised if the continuity of the current interval is not CN. Raised if N < 1.

Reimplemented from Adaptor3d_Curve.

◆ Ellipse()

gp_Elips Adaptor3d_IsoCurve::Ellipse ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ FirstParameter()

Standard_Real Adaptor3d_IsoCurve::FirstParameter ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ GetType()

GeomAbs_CurveType Adaptor3d_IsoCurve::GetType ( ) const

overridevirtual

Returns the type of the curve in the current interval : Line, Circle, Ellipse, Hyperbola, Parabola, BezierCurve, BSplineCurve, OtherCurve.

Reimplemented from Adaptor3d_Curve.

◆ Hyperbola()

gp_Hypr Adaptor3d_IsoCurve::Hyperbola ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Intervals()

void Adaptor3d_IsoCurve::Intervals	(	TColStd_Array1OfReal &	T,
		const GeomAbs_Shape	S
	)		const

overridevirtual

Stores in <T> the parameters bounding the intervals of continuity <S>.

The array must provide enough room to accomodate for the parameters. i.e. T.Length() > NbIntervals()

Reimplemented from Adaptor3d_Curve.

◆ IsClosed()

Standard_Boolean Adaptor3d_IsoCurve::IsClosed ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Iso()

GeomAbs_IsoType Adaptor3d_IsoCurve::Iso ( ) const

◆ IsPeriodic()

Standard_Boolean Adaptor3d_IsoCurve::IsPeriodic ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ IsRational()

Standard_Boolean Adaptor3d_IsoCurve::IsRational ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ LastParameter()

Standard_Real Adaptor3d_IsoCurve::LastParameter ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Line()

gp_Lin Adaptor3d_IsoCurve::Line ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Load() [1/3]

void Adaptor3d_IsoCurve::Load ( const Handle< Adaptor3d_HSurface > & S )

Changes the surface. The iso is reset to NoneIso.

◆ Load() [2/3]

void Adaptor3d_IsoCurve::Load	(	const GeomAbs_IsoType	Iso,
		const Standard_Real	Param
	)

Changes the iso on the current surface.

◆ Load() [3/3]

void Adaptor3d_IsoCurve::Load	(	const GeomAbs_IsoType	Iso,
		const Standard_Real	Param,
		const Standard_Real	WFirst,
		const Standard_Real	WLast
	)

Changes the iso on the current surface.

◆ NbIntervals()

Standard_Integer Adaptor3d_IsoCurve::NbIntervals ( const GeomAbs_Shape S ) const

overridevirtual

Returns the number of intervals for continuity <S>. May be one if Continuity(me) >= <S>

Reimplemented from Adaptor3d_Curve.

◆ NbKnots()

Standard_Integer Adaptor3d_IsoCurve::NbKnots ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ NbPoles()

Standard_Integer Adaptor3d_IsoCurve::NbPoles ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Parabola()

gp_Parab Adaptor3d_IsoCurve::Parabola ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Parameter()

Standard_Real Adaptor3d_IsoCurve::Parameter ( ) const

◆ Period()

Standard_Real Adaptor3d_IsoCurve::Period ( ) const

overridevirtual

Reimplemented from Adaptor3d_Curve.

◆ Resolution()

Standard_Real Adaptor3d_IsoCurve::Resolution ( const Standard_Real R3d ) const

overridevirtual

Returns the parametric resolution corresponding to the real space resolution <R3d>.

Reimplemented from Adaptor3d_Curve.

◆ Surface()

const Handle< Adaptor3d_HSurface >& Adaptor3d_IsoCurve::Surface ( ) const

◆ Trim()

Handle< Adaptor3d_HCurve > Adaptor3d_IsoCurve::Trim	(	const Standard_Real	First,
		const Standard_Real	Last,
		const Standard_Real	Tol
	)		const

overridevirtual

Returns a curve equivalent of <me> between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last>

Reimplemented from Adaptor3d_Curve.

◆ Value()

gp_Pnt Adaptor3d_IsoCurve::Value ( const Standard_Real U ) const

overridevirtual

Computes the point of parameter U on the curve.

Reimplemented from Adaptor3d_Curve.

The documentation for this class was generated from the following file:

Adaptor3d_IsoCurve.hxx

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ Adaptor3d_IsoCurve() [1/4]

◆ Adaptor3d_IsoCurve() [2/4]

◆ Adaptor3d_IsoCurve() [3/4]

◆ Adaptor3d_IsoCurve() [4/4]

Member Function Documentation

◆ Bezier()

◆ BSpline()

◆ Circle()

◆ Continuity()

◆ D0()

◆ D1()

◆ D2()

◆ D3()

◆ Degree()

◆ DN()

◆ Ellipse()

◆ FirstParameter()

◆ GetType()

◆ Hyperbola()

◆ Intervals()

◆ IsClosed()

◆ Iso()

◆ IsPeriodic()

◆ IsRational()

◆ LastParameter()

◆ Line()

◆ Load() [1/3]

◆ Load() [2/3]

◆ Load() [3/3]

◆ NbIntervals()

◆ NbKnots()

◆ NbPoles()

◆ Parabola()

◆ Parameter()

◆ Period()

◆ Resolution()

◆ Surface()

◆ Trim()

◆ Value()