Root class for surfaces on which geometric algorithms work. An adapted surface is an interface between the services provided by a surface and those required of the surface by algorithms which use it. A derived concrete class is provided: GeomAdaptor_Surface for a surface from the Geom package. The Surface class describes the standard behaviour of a surface for generic algorithms. More...

#include <Adaptor3d_Surface.hxx>

Inheritance diagram for Adaptor3d_Surface:

[legend]

Public Member Functions
virtual Standard_Real	FirstUParameter () const

virtual Standard_Real	LastUParameter () const

virtual Standard_Real	FirstVParameter () const

virtual Standard_Real	LastVParameter () const

virtual GeomAbs_Shape	UContinuity () const

virtual GeomAbs_Shape	VContinuity () const

virtual Standard_Integer	NbUIntervals (const GeomAbs_Shape S) const
	Returns the number of U intervals for continuity <S>. May be one if UContinuity(me) >= <S> More...

virtual Standard_Integer	NbVIntervals (const GeomAbs_Shape S) const
	Returns the number of V intervals for continuity <S>. May be one if VContinuity(me) >= <S> More...

virtual void	UIntervals (TColStd_Array1OfReal &T, const GeomAbs_Shape S) const
	Returns the intervals with the requested continuity in the U direction. More...

virtual void	VIntervals (TColStd_Array1OfReal &T, const GeomAbs_Shape S) const
	Returns the intervals with the requested continuity in the V direction. More...

virtual Handle< Adaptor3d_HSurface >	UTrim (const Standard_Real First, const Standard_Real Last, const Standard_Real Tol) const
	Returns a surface trimmed in the U direction equivalent of <me> between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last> More...

virtual Handle< Adaptor3d_HSurface >	VTrim (const Standard_Real First, const Standard_Real Last, const Standard_Real Tol) const
	Returns a surface trimmed in the V direction between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last> More...

virtual Standard_Boolean	IsUClosed () const

virtual Standard_Boolean	IsVClosed () const

virtual Standard_Boolean	IsUPeriodic () const

virtual Standard_Real	UPeriod () const

virtual Standard_Boolean	IsVPeriodic () const

virtual Standard_Real	VPeriod () const

virtual gp_Pnt	Value (const Standard_Real U, const Standard_Real V) const
	Computes the point of parameters U,V on the surface. More...

virtual void	D0 (const Standard_Real U, const Standard_Real V, gp_Pnt &P) const
	Computes the point of parameters U,V on the surface. More...

virtual void	D1 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V) const
	Computes the point and the first derivatives on the surface. Raised if the continuity of the current intervals is not C1. More...

virtual void	D2 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV) const
	Computes the point, the first and second derivatives on the surface. Raised if the continuity of the current intervals is not C2. More...

virtual void	D3 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV, gp_Vec &D3U, gp_Vec &D3V, gp_Vec &D3UUV, gp_Vec &D3UVV) const
	Computes the point, the first, second and third derivatives on the surface. Raised if the continuity of the current intervals is not C3. More...

virtual gp_Vec	DN (const Standard_Real U, const Standard_Real V, const Standard_Integer Nu, const Standard_Integer Nv) const
	Computes the derivative of order Nu in the direction U and Nv in the direction V at the point P(U, V). Raised if the current U interval is not not CNu and the current V interval is not CNv. Raised if Nu + Nv < 1 or Nu < 0 or Nv < 0. More...

virtual Standard_Real	UResolution (const Standard_Real R3d) const
	Returns the parametric U resolution corresponding to the real space resolution <R3d>. More...

virtual Standard_Real	VResolution (const Standard_Real R3d) const
	Returns the parametric V resolution corresponding to the real space resolution <R3d>. More...

virtual GeomAbs_SurfaceType	GetType () const
	Returns the type of the surface : Plane, Cylinder, Cone, Sphere, Torus, BezierSurface, BSplineSurface, SurfaceOfRevolution, SurfaceOfExtrusion, OtherSurface. More...

virtual gp_Pln	Plane () const

virtual gp_Cylinder	Cylinder () const

virtual gp_Cone	Cone () const

virtual gp_Sphere	Sphere () const

virtual gp_Torus	Torus () const

virtual Standard_Integer	UDegree () const

virtual Standard_Integer	NbUPoles () const

virtual Standard_Integer	VDegree () const

virtual Standard_Integer	NbVPoles () const

virtual Standard_Integer	NbUKnots () const

virtual Standard_Integer	NbVKnots () const

virtual Standard_Boolean	IsURational () const

virtual Standard_Boolean	IsVRational () const

virtual Handle< Geom_BezierSurface >	Bezier () const

virtual Handle< Geom_BSplineSurface >	BSpline () const

virtual gp_Ax1	AxeOfRevolution () const

virtual gp_Dir	Direction () const

virtual Handle< Adaptor3d_HCurve >	BasisCurve () const

virtual Handle< Adaptor3d_HSurface >	BasisSurface () const

virtual Standard_Real	OffsetValue () const

virtual	~Adaptor3d_Surface ()

Detailed Description

Root class for surfaces on which geometric algorithms work. An adapted surface is an interface between the services provided by a surface and those required of the surface by algorithms which use it. A derived concrete class is provided: GeomAdaptor_Surface for a surface from the Geom package. The Surface class describes the standard behaviour of a surface for generic algorithms.

The Surface can be decomposed in intervals of any continuity in U and V using the method NbIntervals. A current interval can be set. Most of the methods apply to the current interval. Warning: All the methods are virtual and implemented with a raise to allow to redefined only the methods realy used.

Polynomial coefficients of BSpline surfaces used for their evaluation are cached for better performance. Therefore these evaluations are not thread-safe and parallel evaluations need to be prevented.

Constructor & Destructor Documentation

◆ ~Adaptor3d_Surface()

virtual Adaptor3d_Surface::~Adaptor3d_Surface ( )

virtual

Member Function Documentation

◆ AxeOfRevolution()

virtual gp_Ax1 Adaptor3d_Surface::AxeOfRevolution ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, GeomAdaptor_SurfaceOfLinearExtrusion, and GeomAdaptor_SurfaceOfRevolution.

◆ BasisCurve()

virtual Handle< Adaptor3d_HCurve > Adaptor3d_Surface::BasisCurve ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ BasisSurface()

virtual Handle< Adaptor3d_HSurface > Adaptor3d_Surface::BasisSurface ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, and GeomAdaptor_Surface.

◆ Bezier()

virtual Handle< Geom_BezierSurface > Adaptor3d_Surface::Bezier ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ BSpline()

virtual Handle< Geom_BSplineSurface > Adaptor3d_Surface::BSpline ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ Cone()

virtual gp_Cone Adaptor3d_Surface::Cone ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ Cylinder()

virtual gp_Cylinder Adaptor3d_Surface::Cylinder ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ D0()

virtual void Adaptor3d_Surface::D0	(	const Standard_Real	U,
		const Standard_Real	V,
		gp_Pnt &	P
	)		const

virtual

Computes the point of parameters U,V on the surface.

Reimplemented in BRepAdaptor_Surface, and GeomAdaptor_Surface.

◆ D1()

virtual void Adaptor3d_Surface::D1	(	const Standard_Real	U,
		const Standard_Real	V,
		gp_Pnt &	P,
		gp_Vec &	D1U,
		gp_Vec &	D1V
	)		const

virtual

Computes the point and the first derivatives on the surface. Raised if the continuity of the current intervals is not C1.

Reimplemented in BRepAdaptor_Surface, and GeomAdaptor_Surface.

◆ D2()

virtual void Adaptor3d_Surface::D2	(	const Standard_Real	U,
		const Standard_Real	V,
		gp_Pnt &	P,
		gp_Vec &	D1U,
		gp_Vec &	D1V,
		gp_Vec &	D2U,
		gp_Vec &	D2V,
		gp_Vec &	D2UV
	)		const

virtual

Computes the point, the first and second derivatives on the surface. Raised if the continuity of the current intervals is not C2.

Reimplemented in BRepAdaptor_Surface, and GeomAdaptor_Surface.

◆ D3()

virtual void Adaptor3d_Surface::D3	(	const Standard_Real	U,
		const Standard_Real	V,
		gp_Pnt &	P,
		gp_Vec &	D1U,
		gp_Vec &	D1V,
		gp_Vec &	D2U,
		gp_Vec &	D2V,
		gp_Vec &	D2UV,
		gp_Vec &	D3U,
		gp_Vec &	D3V,
		gp_Vec &	D3UUV,
		gp_Vec &	D3UVV
	)		const

virtual

Computes the point, the first, second and third derivatives on the surface. Raised if the continuity of the current intervals is not C3.

Reimplemented in BRepAdaptor_Surface, and GeomAdaptor_Surface.

◆ Direction()

virtual gp_Dir Adaptor3d_Surface::Direction ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ DN()

virtual gp_Vec Adaptor3d_Surface::DN	(	const Standard_Real	U,
		const Standard_Real	V,
		const Standard_Integer	Nu,
		const Standard_Integer	Nv
	)		const

virtual

Computes the derivative of order Nu in the direction U and Nv in the direction V at the point P(U, V). Raised if the current U interval is not not CNu and the current V interval is not CNv. Raised if Nu + Nv < 1 or Nu < 0 or Nv < 0.

Reimplemented in BRepAdaptor_Surface, and GeomAdaptor_Surface.

◆ FirstUParameter()

virtual Standard_Real Adaptor3d_Surface::FirstUParameter ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ FirstVParameter()

virtual Standard_Real Adaptor3d_Surface::FirstVParameter ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ GetType()

virtual GeomAbs_SurfaceType Adaptor3d_Surface::GetType ( ) const

virtual

Returns the type of the surface : Plane, Cylinder, Cone, Sphere, Torus, BezierSurface, BSplineSurface, SurfaceOfRevolution, SurfaceOfExtrusion, OtherSurface.

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ IsUClosed()

virtual Standard_Boolean Adaptor3d_Surface::IsUClosed ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ IsUPeriodic()

virtual Standard_Boolean Adaptor3d_Surface::IsUPeriodic ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ IsURational()

virtual Standard_Boolean Adaptor3d_Surface::IsURational ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ IsVClosed()

virtual Standard_Boolean Adaptor3d_Surface::IsVClosed ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ IsVPeriodic()

virtual Standard_Boolean Adaptor3d_Surface::IsVPeriodic ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ IsVRational()

virtual Standard_Boolean Adaptor3d_Surface::IsVRational ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ LastUParameter()

virtual Standard_Real Adaptor3d_Surface::LastUParameter ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ LastVParameter()

virtual Standard_Real Adaptor3d_Surface::LastVParameter ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ NbUIntervals()

virtual Standard_Integer Adaptor3d_Surface::NbUIntervals ( const GeomAbs_Shape S ) const

virtual

Returns the number of U intervals for continuity <S>. May be one if UContinuity(me) >= <S>

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ NbUKnots()

virtual Standard_Integer Adaptor3d_Surface::NbUKnots ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, and GeomAdaptor_Surface.

◆ NbUPoles()

virtual Standard_Integer Adaptor3d_Surface::NbUPoles ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ NbVIntervals()

virtual Standard_Integer Adaptor3d_Surface::NbVIntervals ( const GeomAbs_Shape S ) const

virtual

Returns the number of V intervals for continuity <S>. May be one if VContinuity(me) >= <S>

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ NbVKnots()

virtual Standard_Integer Adaptor3d_Surface::NbVKnots ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfRevolution.

◆ NbVPoles()

virtual Standard_Integer Adaptor3d_Surface::NbVPoles ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfRevolution.

◆ OffsetValue()

virtual Standard_Real Adaptor3d_Surface::OffsetValue ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, and GeomAdaptor_Surface.

◆ Plane()

virtual gp_Pln Adaptor3d_Surface::Plane ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ Sphere()

virtual gp_Sphere Adaptor3d_Surface::Sphere ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ Torus()

virtual gp_Torus Adaptor3d_Surface::Torus ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ UContinuity()

virtual GeomAbs_Shape Adaptor3d_Surface::UContinuity ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ UDegree()

virtual Standard_Integer Adaptor3d_Surface::UDegree ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ UIntervals()

virtual void Adaptor3d_Surface::UIntervals	(	TColStd_Array1OfReal &	T,
		const GeomAbs_Shape	S
	)		const

virtual

Returns the intervals with the requested continuity in the U direction.

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ UPeriod()

virtual Standard_Real Adaptor3d_Surface::UPeriod ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ UResolution()

virtual Standard_Real Adaptor3d_Surface::UResolution ( const Standard_Real R3d ) const

virtual

Returns the parametric U resolution corresponding to the real space resolution <R3d>.

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ UTrim()

virtual Handle< Adaptor3d_HSurface > Adaptor3d_Surface::UTrim	(	const Standard_Real	First,
		const Standard_Real	Last,
		const Standard_Real	Tol
	)		const

virtual

Returns a surface trimmed in the U direction equivalent of <me> between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last>

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ Value()

virtual gp_Pnt Adaptor3d_Surface::Value	(	const Standard_Real	U,
		const Standard_Real	V
	)		const

virtual

Computes the point of parameters U,V on the surface.

Reimplemented in BRepAdaptor_Surface, and GeomAdaptor_Surface.

◆ VContinuity()

virtual GeomAbs_Shape Adaptor3d_Surface::VContinuity ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ VDegree()

virtual Standard_Integer Adaptor3d_Surface::VDegree ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfRevolution.

◆ VIntervals()

virtual void Adaptor3d_Surface::VIntervals	(	TColStd_Array1OfReal &	T,
		const GeomAbs_Shape	S
	)		const

virtual

Returns the intervals with the requested continuity in the V direction.

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ VPeriod()

virtual Standard_Real Adaptor3d_Surface::VPeriod ( ) const

virtual

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ VResolution()

virtual Standard_Real Adaptor3d_Surface::VResolution ( const Standard_Real R3d ) const

virtual

Returns the parametric V resolution corresponding to the real space resolution <R3d>.

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, and GeomAdaptor_SurfaceOfLinearExtrusion.

◆ VTrim()

virtual Handle< Adaptor3d_HSurface > Adaptor3d_Surface::VTrim	(	const Standard_Real	First,
		const Standard_Real	Last,
		const Standard_Real	Tol
	)		const

virtual

Returns a surface trimmed in the V direction between parameters <First> and <Last>. <Tol> is used to test for 3d points confusion. If <First> >= <Last>

Reimplemented in BRepAdaptor_Surface, GeomAdaptor_SurfaceOfRevolution, GeomAdaptor_Surface, and GeomAdaptor_SurfaceOfLinearExtrusion.

The documentation for this class was generated from the following file:

Adaptor3d_Surface.hxx

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ ~Adaptor3d_Surface()

Member Function Documentation

◆ AxeOfRevolution()

◆ BasisCurve()

◆ BasisSurface()

◆ Bezier()

◆ BSpline()

◆ Cone()

◆ Cylinder()

◆ D0()

◆ D1()

◆ D2()

◆ D3()

◆ Direction()

◆ DN()

◆ FirstUParameter()

◆ FirstVParameter()

◆ GetType()

◆ IsUClosed()

◆ IsUPeriodic()

◆ IsURational()

◆ IsVClosed()

◆ IsVPeriodic()

◆ IsVRational()

◆ LastUParameter()

◆ LastVParameter()

◆ NbUIntervals()

◆ NbUKnots()

◆ NbUPoles()

◆ NbVIntervals()

◆ NbVKnots()

◆ NbVPoles()

◆ OffsetValue()

◆ Plane()

◆ Sphere()

◆ Torus()

◆ UContinuity()

◆ UDegree()

◆ UIntervals()

◆ UPeriod()

◆ UResolution()

◆ UTrim()

◆ Value()

◆ VContinuity()

◆ VDegree()

◆ VIntervals()

◆ VPeriod()

◆ VResolution()

◆ VTrim()