Open CASCADE Technology  7.2.0
Public Member Functions
BRepFeat_MakeDPrism Class Reference

Describes functions to build draft prism topologies from basis shape surfaces. These can be depressions or protrusions. The semantics of draft prism feature creation is based on the construction of shapes: More...

#include <BRepFeat_MakeDPrism.hxx>

Inheritance diagram for BRepFeat_MakeDPrism:
Inheritance graph
[legend]

Public Member Functions

 BRepFeat_MakeDPrism (const TopoDS_Shape &Sbase, const TopoDS_Face &Pbase, const TopoDS_Face &Skface, const Standard_Real Angle, const Standard_Integer Fuse, const Standard_Boolean Modify)
 A face Pbase is selected in the shape Sbase to serve as the basis for the draft prism. The draft will be defined by the angle Angle and Fuse offers a choice between: More...
 
 BRepFeat_MakeDPrism ()
 
void Init (const TopoDS_Shape &Sbase, const TopoDS_Face &Pbase, const TopoDS_Face &Skface, const Standard_Real Angle, const Standard_Integer Fuse, const Standard_Boolean Modify)
 Initializes this algorithm for building draft prisms along surfaces. A face Pbase is selected in the basis shape Sbase to serve as the basis from the draft prism. The draft will be defined by the angle Angle and Fuse offers a choice between: More...
 
void Add (const TopoDS_Edge &E, const TopoDS_Face &OnFace)
 Indicates that the edge <E> will slide on the face <OnFace>. Raises ConstructionError if the face does not belong to the basis shape, or the edge to the prismed shape. More...
 
void Perform (const Standard_Real Height)
 
void Perform (const TopoDS_Shape &Until)
 
void Perform (const TopoDS_Shape &From, const TopoDS_Shape &Until)
 Assigns one of the following semantics. More...
 
void PerformUntilEnd ()
 Realizes a semi-infinite prism, limited by the position of the prism base. More...
 
void PerformFromEnd (const TopoDS_Shape &FUntil)
 Realizes a semi-infinite prism, limited by the face Funtil. More...
 
void PerformThruAll ()
 Builds an infinite prism. The infinite descendants will not be kept in the result. More...
 
void PerformUntilHeight (const TopoDS_Shape &Until, const Standard_Real Height)
 Assigns both a limiting shape, Until from TopoDS_Shape, and a height, Height at which to stop generation of the prism feature. More...
 
void Curves (TColGeom_SequenceOfCurve &S)
 
Handle< Geom_CurveBarycCurve ()
 
void BossEdges (const Standard_Integer sig)
 Determination of TopEdges and LatEdges. sig = 1 -> TopEdges = FirstShape of the DPrism sig = 2 -> TOpEdges = LastShape of the DPrism. More...
 
const TopTools_ListOfShapeTopEdges ()
 Returns the list of TopoDS Edges of the top of the boss. More...
 
const TopTools_ListOfShapeLatEdges ()
 Returns the list of TopoDS Edges of the bottom of the boss. More...
 
- Public Member Functions inherited from BRepFeat_Form
virtual const TopTools_ListOfShapeModified (const TopoDS_Shape &F) override
 returns the list of generated Faces. More...
 
virtual const TopTools_ListOfShapeGenerated (const TopoDS_Shape &S) override
 returns a list of the created faces from the shape <S>. More...
 
virtual Standard_Boolean IsDeleted (const TopoDS_Shape &S) override
 Returns true if the shape S has been deleted. More...
 
const TopTools_ListOfShapeFirstShape () const
 Returns the list of shapes created at the bottom of the created form. It may be an empty list. More...
 
const TopTools_ListOfShapeLastShape () const
 Returns the list of shapes created at the top of the created form. It may be an empty list. More...
 
const TopTools_ListOfShapeNewEdges () const
 Returns a list of the limiting and glueing edges generated by the feature. These edges did not originally exist in the basis shape. The list provides the information necessary for subsequent addition of fillets. It may be an empty list. More...
 
const TopTools_ListOfShapeTgtEdges () const
 Returns a list of the tangent edges among the limiting and glueing edges generated by the feature. These edges did not originally exist in the basis shape and are tangent to the face against which the feature is built. The list provides the information necessary for subsequent addition of fillets. It may be an empty list. If an edge is tangent, no fillet is possible, and the edge must subsequently be removed if you want to add a fillet. More...
 
void BasisShapeValid ()
 Initializes the topological construction if the basis shape is present. More...
 
void GeneratedShapeValid ()
 Initializes the topological construction if the generated shape S is present. More...
 
void ShapeFromValid ()
 Initializes the topological construction if the shape is present from the specified integer on. More...
 
void ShapeUntilValid ()
 Initializes the topological construction if the shape is present until the specified integer. More...
 
void GluedFacesValid ()
 Initializes the topological construction if the glued face is present. More...
 
void SketchFaceValid ()
 Initializes the topological construction if the sketch face is present. If the sketch face is inside the basis shape, local operations such as glueing can be performed. More...
 
void PerfSelectionValid ()
 Initializes the topological construction if the selected face is present. More...
 
BRepFeat_StatusError CurrentStatusError () const
 
- Public Member Functions inherited from BRepBuilderAPI_MakeShape
virtual void Build ()
 This is called by Shape(). It does nothing but may be redefined. More...
 
virtual const TopoDS_ShapeShape ()
 Returns a shape built by the shape construction algorithm. Raises exception StdFail_NotDone if the shape was not built. More...
 
 operator TopoDS_Shape ()
 
- Public Member Functions inherited from BRepBuilderAPI_Command
virtual ~BRepBuilderAPI_Command ()
 
virtual Standard_Boolean IsDone () const
 
void Check () const
 Raises NotDone if done is false. More...
 

Additional Inherited Members

- Protected Member Functions inherited from BRepFeat_Form
 BRepFeat_Form ()
 Redefines the empty constructor. More...
 
void GlobalPerform ()
 General perform method... More...
 
void UpdateDescendants (const LocOpe_Gluer &G)
 
void UpdateDescendants (const BRepAlgoAPI_BooleanOperation &aBOP, const TopoDS_Shape &SResult, const Standard_Boolean SkipFace=Standard_False)
 
Standard_Boolean TransformShapeFU (const Standard_Integer flag)
 
- Protected Member Functions inherited from BRepBuilderAPI_MakeShape
 BRepBuilderAPI_MakeShape ()
 
- Protected Member Functions inherited from BRepBuilderAPI_Command
 BRepBuilderAPI_Command ()
 Set done to False. More...
 
void Done ()
 Set done to true. More...
 
void NotDone ()
 Set done to false. More...
 
- Protected Attributes inherited from BRepFeat_Form
Standard_Boolean myFuse
 
Standard_Boolean myModify
 
TopTools_DataMapOfShapeListOfShape myMap
 
TopoDS_Shape myFShape
 
TopoDS_Shape myLShape
 
TopTools_ListOfShape myNewEdges
 
TopTools_ListOfShape myTgtEdges
 
BRepFeat_PerfSelection myPerfSelection
 
Standard_Boolean myJustGluer
 
Standard_Boolean myJustFeat
 
TopoDS_Shape mySbase
 
TopoDS_Face mySkface
 
TopoDS_Shape myGShape
 
TopoDS_Shape mySFrom
 
TopoDS_Shape mySUntil
 
TopTools_DataMapOfShapeShape myGluedF
 
- Protected Attributes inherited from BRepBuilderAPI_MakeShape
TopoDS_Shape myShape
 
TopTools_ListOfShape myGenerated
 

Detailed Description

Describes functions to build draft prism topologies from basis shape surfaces. These can be depressions or protrusions. The semantics of draft prism feature creation is based on the construction of shapes:

Constructor & Destructor Documentation

◆ BRepFeat_MakeDPrism() [1/2]

BRepFeat_MakeDPrism::BRepFeat_MakeDPrism ( const TopoDS_Shape Sbase,
const TopoDS_Face Pbase,
const TopoDS_Face Skface,
const Standard_Real  Angle,
const Standard_Integer  Fuse,
const Standard_Boolean  Modify 
)

A face Pbase is selected in the shape Sbase to serve as the basis for the draft prism. The draft will be defined by the angle Angle and Fuse offers a choice between:

  • removing matter with a Boolean cut using the setting 0
  • adding matter with Boolean fusion using the setting 1. The sketch face Skface serves to determine the type of operation. If it is inside the basis shape, a local operation such as glueing can be performed. Initializes the draft prism class

◆ BRepFeat_MakeDPrism() [2/2]

BRepFeat_MakeDPrism::BRepFeat_MakeDPrism ( )

Member Function Documentation

◆ Add()

void BRepFeat_MakeDPrism::Add ( const TopoDS_Edge E,
const TopoDS_Face OnFace 
)

Indicates that the edge <E> will slide on the face <OnFace>. Raises ConstructionError if the face does not belong to the basis shape, or the edge to the prismed shape.

◆ BarycCurve()

Handle< Geom_Curve > BRepFeat_MakeDPrism::BarycCurve ( )
virtual

Implements BRepFeat_Form.

◆ BossEdges()

void BRepFeat_MakeDPrism::BossEdges ( const Standard_Integer  sig)

Determination of TopEdges and LatEdges. sig = 1 -> TopEdges = FirstShape of the DPrism sig = 2 -> TOpEdges = LastShape of the DPrism.

◆ Curves()

void BRepFeat_MakeDPrism::Curves ( TColGeom_SequenceOfCurve S)
virtual

Implements BRepFeat_Form.

◆ Init()

void BRepFeat_MakeDPrism::Init ( const TopoDS_Shape Sbase,
const TopoDS_Face Pbase,
const TopoDS_Face Skface,
const Standard_Real  Angle,
const Standard_Integer  Fuse,
const Standard_Boolean  Modify 
)

Initializes this algorithm for building draft prisms along surfaces. A face Pbase is selected in the basis shape Sbase to serve as the basis from the draft prism. The draft will be defined by the angle Angle and Fuse offers a choice between:

  • removing matter with a Boolean cut using the setting 0
  • adding matter with Boolean fusion using the setting 1. The sketch face Skface serves to determine the type of operation. If it is inside the basis shape, a local operation such as glueing can be performed.

◆ LatEdges()

const TopTools_ListOfShape& BRepFeat_MakeDPrism::LatEdges ( )

Returns the list of TopoDS Edges of the bottom of the boss.

◆ Perform() [1/3]

void BRepFeat_MakeDPrism::Perform ( const Standard_Real  Height)

◆ Perform() [2/3]

void BRepFeat_MakeDPrism::Perform ( const TopoDS_Shape Until)

◆ Perform() [3/3]

void BRepFeat_MakeDPrism::Perform ( const TopoDS_Shape From,
const TopoDS_Shape Until 
)

Assigns one of the following semantics.

  • to a height Height
  • to a face Until
  • from a face From to a height Until. Reconstructs the feature topologically according to the semantic option chosen.

◆ PerformFromEnd()

void BRepFeat_MakeDPrism::PerformFromEnd ( const TopoDS_Shape FUntil)

Realizes a semi-infinite prism, limited by the face Funtil.

◆ PerformThruAll()

void BRepFeat_MakeDPrism::PerformThruAll ( )

Builds an infinite prism. The infinite descendants will not be kept in the result.

◆ PerformUntilEnd()

void BRepFeat_MakeDPrism::PerformUntilEnd ( )

Realizes a semi-infinite prism, limited by the position of the prism base.

◆ PerformUntilHeight()

void BRepFeat_MakeDPrism::PerformUntilHeight ( const TopoDS_Shape Until,
const Standard_Real  Height 
)

Assigns both a limiting shape, Until from TopoDS_Shape, and a height, Height at which to stop generation of the prism feature.

◆ TopEdges()

const TopTools_ListOfShape& BRepFeat_MakeDPrism::TopEdges ( )

Returns the list of TopoDS Edges of the top of the boss.


The documentation for this class was generated from the following file: