Describes a right-handed coordinate system in 3D space. A coordinate system is defined by: More...

#include <Geom_Axis2Placement.hxx>

Inheritance diagram for Geom_Axis2Placement:

Public Member Functions
	Geom_Axis2Placement (const gp_Ax2 &A2)
	Returns a transient copy of A2. More...

	Geom_Axis2Placement (const gp_Pnt &P, const gp_Dir &N, const gp_Dir &Vx)
	P is the origin of the axis placement, N is the main direction of the axis placement and Vx is the "XDirection". If the two directions N and Vx are not orthogonal the "XDirection" is computed as follow : XDirection = N ^ (Vx ^ N). Raised if N and Vx are parallel. More...

void	SetAx2 (const gp_Ax2 &A2)
	Assigns the origin and the three unit vectors of A2 to this coordinate system. More...

void	SetDirection (const gp_Dir &V) override
	Changes the main direction of the axis placement. The "Xdirection" is modified : New XDirection = V ^ (Previous_Xdirection ^ V). More...

void	SetXDirection (const gp_Dir &Vx)
	Changes the "XDirection" of the axis placement, Vx is the new "XDirection". If Vx is not normal to the main direction then "XDirection" is computed as follow : XDirection = Direction ^ ( Vx ^ Direction). The main direction is not modified. Raised if Vx and "Direction" are parallel. More...

void	SetYDirection (const gp_Dir &Vy)
	Changes the "YDirection" of the axis placement, Vy is the new "YDirection". If Vy is not normal to the main direction then "YDirection" is computed as follow : YDirection = Direction ^ ( Vy ^ Direction). The main direction is not modified. The "XDirection" is modified. Raised if Vy and the main direction are parallel. More...

gp_Ax2	Ax2 () const
	Returns a non transient copy of <me>. More...

const gp_Dir &	XDirection () const
	Returns the "XDirection". This is a unit vector. More...

const gp_Dir &	YDirection () const
	Returns the "YDirection". This is a unit vector. More...

void	Transform (const gp_Trsf &T) override
	Transforms an axis placement with a Trsf. The "Location" point, the "XDirection" and the "YDirection" are transformed with T. The resulting main "Direction" of <me> is the cross product between the "XDirection" and the "YDirection" after transformation. More...

Handle< Geom_Geometry >	Copy () const override
	Creates a new object which is a copy of this coordinate system. More...

Public Member Functions inherited from Geom_AxisPlacement
void	SetAxis (const gp_Ax1 &A1)
	Assigns A1 as the "main Axis" of this positioning system. This modifies. More...

void	SetLocation (const gp_Pnt &P)
	Assigns the point P as the origin of this positioning system. More...

Standard_Real	Angle (const Handle< Geom_AxisPlacement > &Other) const
	Computes the angular value, in radians, between the "main Direction" of this positioning system and that of positioning system Other. The result is a value between 0 and Pi. More...

const gp_Ax1 &	Axis () const
	Returns the main axis of the axis placement. For an "Axis2placement" it is the main axis (Location, Direction ). For an "Axis1Placement" this method returns a copy of <me>. More...

gp_Dir	Direction () const
	Returns the main "Direction" of an axis placement. More...

gp_Pnt	Location () const
	Returns the Location point (origin) of the axis placement. More...

Public Member Functions inherited from Geom_Geometry
void	Mirror (const gp_Pnt &P)
	Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry. More...

void	Mirror (const gp_Ax1 &A1)
	Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. More...

void	Mirror (const gp_Ax2 &A2)
	Performs the symmetrical transformation of a Geometry with respect to a plane. The axis placement A2 locates the plane of the symmetry : (Location, XDirection, YDirection). More...

void	Rotate (const gp_Ax1 &A1, const Standard_Real Ang)
	Rotates a Geometry. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians. More...

void	Scale (const gp_Pnt &P, const Standard_Real S)
	Scales a Geometry. S is the scaling value. More...

void	Translate (const gp_Vec &V)
	Translates a Geometry. V is the vector of the tanslation. More...

void	Translate (const gp_Pnt &P1, const gp_Pnt &P2)
	Translates a Geometry from the point P1 to the point P2. More...

Handle< Geom_Geometry >	Mirrored (const gp_Pnt &P) const

Handle< Geom_Geometry >	Mirrored (const gp_Ax1 &A1) const

Handle< Geom_Geometry >	Mirrored (const gp_Ax2 &A2) const

Handle< Geom_Geometry >	Rotated (const gp_Ax1 &A1, const Standard_Real Ang) const

Handle< Geom_Geometry >	Scaled (const gp_Pnt &P, const Standard_Real S) const

Handle< Geom_Geometry >	Transformed (const gp_Trsf &T) const

Handle< Geom_Geometry >	Translated (const gp_Vec &V) const

Handle< Geom_Geometry >	Translated (const gp_Pnt &P1, const gp_Pnt &P2) const

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Protected Attributes inherited from Geom_AxisPlacement
gp_Ax1	axis

Detailed Description

Describes a right-handed coordinate system in 3D space. A coordinate system is defined by:

its origin, also termed the "Location point" of the coordinate system,
three orthogonal unit vectors, termed respectively the "X Direction", "Y Direction" and "Direction" (or "main Direction") of the coordinate system. As a Geom_Axis2Placement coordinate system is right-handed, its "Direction" is always equal to the cross product of its "X Direction" and "Y Direction". The "Direction" of a coordinate system is called the "main Direction" because when this unit vector is modified, the "X Direction" and "Y Direction" are recomputed, whereas when the "X Direction" or "Y Direction" is changed, the "main Direction" is retained. The "main Direction" is also the "Z Direction". Note: Geom_Axis2Placement coordinate systems provide the same kind of "geometric" services as gp_Ax2 coordinate systems but have more complex data structures. The geometric objects provided by the Geom package use gp_Ax2 objects to include coordinate systems in their data structures, or to define the geometric transformations, which are applied to them. Geom_Axis2Placement coordinate systems are used in a context where they can be shared by several objects contained inside a common data structure.

Constructor & Destructor Documentation

◆ Geom_Axis2Placement() [1/2]

Geom_Axis2Placement::Geom_Axis2Placement ( const gp_Ax2 & A2 )

Returns a transient copy of A2.

◆ Geom_Axis2Placement() [2/2]

Geom_Axis2Placement::Geom_Axis2Placement	(	const gp_Pnt &	P,
		const gp_Dir &	N,
		const gp_Dir &	Vx
	)

P is the origin of the axis placement, N is the main direction of the axis placement and Vx is the "XDirection". If the two directions N and Vx are not orthogonal the "XDirection" is computed as follow : XDirection = N ^ (Vx ^ N). Raised if N and Vx are parallel.

Member Function Documentation

◆ Ax2()

gp_Ax2 Geom_Axis2Placement::Ax2 ( ) const

Returns a non transient copy of <me>.

◆ Copy()

Handle< Geom_Geometry > Geom_Axis2Placement::Copy ( ) const

overridevirtual

Creates a new object which is a copy of this coordinate system.

Implements Geom_Geometry.

◆ SetAx2()

void Geom_Axis2Placement::SetAx2 ( const gp_Ax2 & A2 )

Assigns the origin and the three unit vectors of A2 to this coordinate system.

◆ SetDirection()

void Geom_Axis2Placement::SetDirection ( const gp_Dir & V )

overridevirtual

Changes the main direction of the axis placement. The "Xdirection" is modified : New XDirection = V ^ (Previous_Xdirection ^ V).

Raised if V and the previous "XDirection" are parallel because it is impossible to calculate the new "XDirection" and the new "YDirection".

Implements Geom_AxisPlacement.

◆ SetXDirection()

void Geom_Axis2Placement::SetXDirection ( const gp_Dir & Vx )

Changes the "XDirection" of the axis placement, Vx is the new "XDirection". If Vx is not normal to the main direction then "XDirection" is computed as follow : XDirection = Direction ^ ( Vx ^ Direction). The main direction is not modified. Raised if Vx and "Direction" are parallel.

◆ SetYDirection()

void Geom_Axis2Placement::SetYDirection ( const gp_Dir & Vy )

Changes the "YDirection" of the axis placement, Vy is the new "YDirection". If Vy is not normal to the main direction then "YDirection" is computed as follow : YDirection = Direction ^ ( Vy ^ Direction). The main direction is not modified. The "XDirection" is modified. Raised if Vy and the main direction are parallel.

◆ Transform()

void Geom_Axis2Placement::Transform ( const gp_Trsf & T )

overridevirtual

Transforms an axis placement with a Trsf. The "Location" point, the "XDirection" and the "YDirection" are transformed with T. The resulting main "Direction" of <me> is the cross product between the "XDirection" and the "YDirection" after transformation.

Implements Geom_Geometry.

◆ XDirection()

const gp_Dir& Geom_Axis2Placement::XDirection ( ) const

Returns the "XDirection". This is a unit vector.

◆ YDirection()

const gp_Dir& Geom_Axis2Placement::YDirection ( ) const

Returns the "YDirection". This is a unit vector.

The documentation for this class was generated from the following file:

Geom_Axis2Placement.hxx

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ Geom_Axis2Placement() [1/2]

◆ Geom_Axis2Placement() [2/2]

Member Function Documentation

◆ Ax2()

◆ Copy()

◆ SetAx2()

◆ SetDirection()

◆ SetXDirection()

◆ SetYDirection()

◆ Transform()

◆ XDirection()

◆ YDirection()