#include <TopOpeBRep_VPointInter.hxx>

Public Member Functions
	TopOpeBRep_VPointInter ()

void	SetPoint (const IntPatch_Point &P)

void	SetShapes (const Standard_Integer I1, const Standard_Integer I2)

void	GetShapes (Standard_Integer &I1, Standard_Integer &I2) const

IntSurf_Transition	TransitionOnS1 () const

IntSurf_Transition	TransitionOnS2 () const

IntSurf_Transition	TransitionLineArc1 () const

IntSurf_Transition	TransitionLineArc2 () const

Standard_Boolean	IsOnDomS1 () const

Standard_Boolean	IsOnDomS2 () const

void	ParametersOnS1 (Standard_Real &u, Standard_Real &v) const

void	ParametersOnS2 (Standard_Real &u, Standard_Real &v) const

const gp_Pnt &	Value () const

Standard_Real	Tolerance () const

const TopoDS_Shape &	ArcOnS1 () const

const TopoDS_Shape &	ArcOnS2 () const

Standard_Real	ParameterOnLine () const

Standard_Real	ParameterOnArc1 () const

Standard_Boolean	IsVertexOnS1 () const
	Returns TRUE if the point is a vertex on the initial restriction facet of the first surface. More...

const TopoDS_Shape &	VertexOnS1 () const
	Returns the information about the point when it is on the domain of the first patch, i-e when the function IsVertexOnS1 returns True. Otherwise, an exception is raised. More...

Standard_Real	ParameterOnArc2 () const

Standard_Boolean	IsVertexOnS2 () const
	Returns TRUE if the point is a vertex on the initial restriction facet of the second surface. More...

const TopoDS_Shape &	VertexOnS2 () const
	Returns the information about the point when it is on the domain of the second patch, i-e when the function IsVertexOnS2 returns True. Otherwise, an exception is raised. More...

Standard_Boolean	IsInternal () const

Standard_Boolean	IsMultiple () const
	Returns True if the point belongs to several intersection lines. More...

TopAbs_State	State (const Standard_Integer I) const
	get state of VPoint within the domain of geometric shape domain (= 1 or 2). More...

void	State (const TopAbs_State S, const Standard_Integer I)
	Set the state of VPoint within the domain of the geometric shape (= 1 or 2). More...

void	EdgeON (const TopoDS_Shape &Eon, const Standard_Real Par, const Standard_Integer I)
	set the shape Eon of shape I (1,2) containing the point, and parameter <Par> of point on <Eon>. More...

const TopoDS_Shape &	EdgeON (const Standard_Integer I) const
	get the edge of shape I (1,2) containing the point. More...

Standard_Real	EdgeONParameter (const Standard_Integer I) const
	get the parameter on edge of shape I (1,2) containing the point. More...

Standard_Integer	ShapeIndex () const
	returns value of filed myShapeIndex = 0,1,2,3 0 means the VPoint is on no restriction 1 means the VPoint is on the restriction 1 2 means the VPoint is on the restriction 2 3 means the VPoint is on the restrictions 1 and 2 More...

void	ShapeIndex (const Standard_Integer I)
	set value of shape supporting me (0,1,2,3). More...

const TopoDS_Shape &	Edge (const Standard_Integer I) const
	get the edge of shape I (1,2) containing the point. Returned shape is null if the VPoint is not on an edge of shape I (1,2). More...

Standard_Real	EdgeParameter (const Standard_Integer I) const
	get the parameter on edge of shape I (1,2) containing the point More...

gp_Pnt2d	SurfaceParameters (const Standard_Integer I) const
	get the parameter on surface of shape I (1,2) containing the point More...

Standard_Boolean	IsVertex (const Standard_Integer I) const

const TopoDS_Shape &	Vertex (const Standard_Integer I) const

void	UpdateKeep ()
	set myKeep value according to current states. More...

Standard_Boolean	Keep () const
	Returns value of myKeep (does not evaluate states) False at creation of VPoint. Updated by State(State from TopAbs,Integer from Standard) More...

void	ChangeKeep (const Standard_Boolean keep)
	updates VPointInter flag "keep" with <keep>. More...

Standard_Boolean	EqualpP (const TopOpeBRep_VPointInter &VP) const
	returns <True> if the 3d points and the parameters of the VPoints are same More...

Standard_Boolean	ParonE (const TopoDS_Edge &E, Standard_Real &par) const
	returns <false> if the vpoint is not given on arc <E>, else returns <par> parameter on <E> More...

void	Index (const Standard_Integer I)

Standard_Integer	Index () const

Standard_OStream &	Dump (const Standard_Integer I, const TopoDS_Face &F, Standard_OStream &OS) const

Standard_OStream &	Dump (const TopoDS_Face &F1, const TopoDS_Face &F2, Standard_OStream &OS) const

TopOpeBRep_PThePointOfIntersection	PThePointOfIntersectionDummy () const

Constructor & Destructor Documentation

◆ TopOpeBRep_VPointInter()

TopOpeBRep_VPointInter::TopOpeBRep_VPointInter ( )

Member Function Documentation

◆ ArcOnS1()

const TopoDS_Shape& TopOpeBRep_VPointInter::ArcOnS1 ( ) const

◆ ArcOnS2()

const TopoDS_Shape& TopOpeBRep_VPointInter::ArcOnS2 ( ) const

◆ ChangeKeep()

void TopOpeBRep_VPointInter::ChangeKeep ( const Standard_Boolean keep )

updates VPointInter flag "keep" with <keep>.

◆ Dump() [1/2]

Standard_OStream& TopOpeBRep_VPointInter::Dump	(	const Standard_Integer	I,
		const TopoDS_Face &	F,
		Standard_OStream &	OS
	)		const

◆ Dump() [2/2]

Standard_OStream& TopOpeBRep_VPointInter::Dump	(	const TopoDS_Face &	F1,
		const TopoDS_Face &	F2,
		Standard_OStream &	OS
	)		const

◆ Edge()

const TopoDS_Shape& TopOpeBRep_VPointInter::Edge ( const Standard_Integer I ) const

get the edge of shape I (1,2) containing the point. Returned shape is null if the VPoint is not on an edge of shape I (1,2).

◆ EdgeON() [1/2]

void TopOpeBRep_VPointInter::EdgeON	(	const TopoDS_Shape &	Eon,
		const Standard_Real	Par,
		const Standard_Integer	I
	)

set the shape Eon of shape I (1,2) containing the point, and parameter <Par> of point on <Eon>.

◆ EdgeON() [2/2]

const TopoDS_Shape& TopOpeBRep_VPointInter::EdgeON ( const Standard_Integer I ) const

get the edge of shape I (1,2) containing the point.

◆ EdgeONParameter()

Standard_Real TopOpeBRep_VPointInter::EdgeONParameter ( const Standard_Integer I ) const

get the parameter on edge of shape I (1,2) containing the point.

◆ EdgeParameter()

Standard_Real TopOpeBRep_VPointInter::EdgeParameter ( const Standard_Integer I ) const

get the parameter on edge of shape I (1,2) containing the point

◆ EqualpP()

Standard_Boolean TopOpeBRep_VPointInter::EqualpP ( const TopOpeBRep_VPointInter & VP ) const

returns <True> if the 3d points and the parameters of the VPoints are same

◆ GetShapes()

void TopOpeBRep_VPointInter::GetShapes	(	Standard_Integer &	I1,
		Standard_Integer &	I2
	)		const

◆ Index() [1/2]

void TopOpeBRep_VPointInter::Index ( const Standard_Integer I )

◆ Index() [2/2]

Standard_Integer TopOpeBRep_VPointInter::Index ( ) const

◆ IsInternal()

Standard_Boolean TopOpeBRep_VPointInter::IsInternal ( ) const

◆ IsMultiple()

Standard_Boolean TopOpeBRep_VPointInter::IsMultiple ( ) const

Returns True if the point belongs to several intersection lines.

◆ IsOnDomS1()

Standard_Boolean TopOpeBRep_VPointInter::IsOnDomS1 ( ) const

◆ IsOnDomS2()

Standard_Boolean TopOpeBRep_VPointInter::IsOnDomS2 ( ) const

◆ IsVertex()

Standard_Boolean TopOpeBRep_VPointInter::IsVertex ( const Standard_Integer I ) const

◆ IsVertexOnS1()

Standard_Boolean TopOpeBRep_VPointInter::IsVertexOnS1 ( ) const

Returns TRUE if the point is a vertex on the initial restriction facet of the first surface.

◆ IsVertexOnS2()

Standard_Boolean TopOpeBRep_VPointInter::IsVertexOnS2 ( ) const

Returns TRUE if the point is a vertex on the initial restriction facet of the second surface.

◆ Keep()

Standard_Boolean TopOpeBRep_VPointInter::Keep ( ) const

Returns value of myKeep (does not evaluate states) False at creation of VPoint. Updated by State(State from TopAbs,Integer from Standard)

◆ ParameterOnArc1()

Standard_Real TopOpeBRep_VPointInter::ParameterOnArc1 ( ) const

◆ ParameterOnArc2()

Standard_Real TopOpeBRep_VPointInter::ParameterOnArc2 ( ) const

◆ ParameterOnLine()

Standard_Real TopOpeBRep_VPointInter::ParameterOnLine ( ) const

◆ ParametersOnS1()

void TopOpeBRep_VPointInter::ParametersOnS1	(	Standard_Real &	u,
		Standard_Real &	v
	)		const

◆ ParametersOnS2()

void TopOpeBRep_VPointInter::ParametersOnS2	(	Standard_Real &	u,
		Standard_Real &	v
	)		const

◆ ParonE()

Standard_Boolean TopOpeBRep_VPointInter::ParonE	(	const TopoDS_Edge &	E,
		Standard_Real &	par
	)		const

returns <false> if the vpoint is not given on arc <E>, else returns <par> parameter on <E>

◆ PThePointOfIntersectionDummy()

TopOpeBRep_PThePointOfIntersection TopOpeBRep_VPointInter::PThePointOfIntersectionDummy ( ) const

◆ SetPoint()

void TopOpeBRep_VPointInter::SetPoint ( const IntPatch_Point & P )

◆ SetShapes()

void TopOpeBRep_VPointInter::SetShapes	(	const Standard_Integer	I1,
		const Standard_Integer	I2
	)

◆ ShapeIndex() [1/2]

Standard_Integer TopOpeBRep_VPointInter::ShapeIndex ( ) const

returns value of filed myShapeIndex = 0,1,2,3 0 means the VPoint is on no restriction 1 means the VPoint is on the restriction 1 2 means the VPoint is on the restriction 2 3 means the VPoint is on the restrictions 1 and 2

◆ ShapeIndex() [2/2]

void TopOpeBRep_VPointInter::ShapeIndex ( const Standard_Integer I )

set value of shape supporting me (0,1,2,3).

◆ State() [1/2]

TopAbs_State TopOpeBRep_VPointInter::State ( const Standard_Integer I ) const

get state of VPoint within the domain of geometric shape domain (= 1 or 2).

◆ State() [2/2]

void TopOpeBRep_VPointInter::State	(	const TopAbs_State	S,
		const Standard_Integer	I
	)

Set the state of VPoint within the domain of the geometric shape (= 1 or 2).

◆ SurfaceParameters()

gp_Pnt2d TopOpeBRep_VPointInter::SurfaceParameters ( const Standard_Integer I ) const

get the parameter on surface of shape I (1,2) containing the point

◆ Tolerance()

Standard_Real TopOpeBRep_VPointInter::Tolerance ( ) const

◆ TransitionLineArc1()

IntSurf_Transition TopOpeBRep_VPointInter::TransitionLineArc1 ( ) const

◆ TransitionLineArc2()

IntSurf_Transition TopOpeBRep_VPointInter::TransitionLineArc2 ( ) const

◆ TransitionOnS1()

IntSurf_Transition TopOpeBRep_VPointInter::TransitionOnS1 ( ) const

◆ TransitionOnS2()

IntSurf_Transition TopOpeBRep_VPointInter::TransitionOnS2 ( ) const

◆ UpdateKeep()

void TopOpeBRep_VPointInter::UpdateKeep ( )

set myKeep value according to current states.

◆ Value()

const gp_Pnt& TopOpeBRep_VPointInter::Value ( ) const

◆ Vertex()

const TopoDS_Shape& TopOpeBRep_VPointInter::Vertex ( const Standard_Integer I ) const

◆ VertexOnS1()

const TopoDS_Shape& TopOpeBRep_VPointInter::VertexOnS1 ( ) const

Returns the information about the point when it is on the domain of the first patch, i-e when the function IsVertexOnS1 returns True. Otherwise, an exception is raised.

◆ VertexOnS2()

const TopoDS_Shape& TopOpeBRep_VPointInter::VertexOnS2 ( ) const

Returns the information about the point when it is on the domain of the second patch, i-e when the function IsVertexOnS2 returns True. Otherwise, an exception is raised.

The documentation for this class was generated from the following file:

TopOpeBRep_VPointInter.hxx

Public Member Functions