This class allows to map textures on shapes. Presentations modes AIS_WireFrame (0) and AIS_Shaded (1) behave in the same manner as in AIS_Shape, whilst new modes 2 (bounding box) and 3 (texture mapping) extends it functionality. More...

#include <AIS_TexturedShape.hxx>

Inheritance diagram for AIS_TexturedShape:

[legend]

Public Member Functions
main methods
	AIS_TexturedShape (const TopoDS_Shape &theShape)
	Initializes the textured shape. More...

virtual void	SetTextureFileName (const TCollection_AsciiString &theTextureFileName)
	Sets the texture source. <theTextureFileName> can specify path to texture image or one of the standard predefined textures. The accepted file types are those used in Image_AlienPixMap with extensions such as rgb, png, jpg and more. To specify the standard predefined texture, the <theTextureFileName> should contain integer - the Graphic3d_NameOfTexture2D enumeration index. Setting texture source using this method resets the source pixmap (if was set previously). More...

virtual void	SetTexturePixMap (const Handle< Image_PixMap > &theTexturePixMap)
	Sets the texture source. <theTexturePixMap> specifies image data. Please note that the data should be in Bottom-Up order, the flag of Image_PixMap::IsTopDown() will be ignored by graphic driver. Setting texture source using this method resets the source by filename (if was set previously). More...

Standard_Boolean	TextureMapState () const

void	SetTextureMapOn ()
	Enables texture mapping. More...

void	SetTextureMapOff ()
	Disables texture mapping. More...

Standard_CString	TextureFile () const

const Handle< Image_PixMap > &	TexturePixMap () const

methods to alter texture mapping properties
void	UpdateAttributes ()
	Use this method to display the textured shape without recomputing the whole presentation. Use this method when ONLY the texture content has been changed. If other parameters (ie: scale factors, texture origin, texture repeat...) have changed, the whole presentation has to be recomputed: More...

virtual void	SetColor (const Quantity_Color &theColor) override
	Sets the color. More...

virtual void	UnsetColor () override
	Removes settings for the color. More...

virtual void	SetMaterial (const Graphic3d_MaterialAspect &theAspect) override
	Sets the material aspect. More...

virtual void	UnsetMaterial () override
	Removes settings for material aspect. More...

void	EnableTextureModulate ()
	Enables texture modulation. More...

void	DisableTextureModulate ()
	Disables texture modulation. More...

Standard_Boolean	TextureRepeat () const

Standard_Real	URepeat () const

Standard_Real	VRepeat () const

void	SetTextureRepeat (const Standard_Boolean theToRepeat, const Standard_Real theURepeat=1.0, const Standard_Real theVRepeat=1.0)
	Sets the number of occurrences of the texture on each face. The texture itself is parameterized in (0,1) by (0,1). Each face of the shape to be textured is parameterized in UV space (Umin,Umax) by (Vmin,Vmax). If RepeatYN is set to false, texture coordinates are clamped in the range (0,1)x(0,1) of the face. More...

Standard_Boolean	TextureOrigin () const

Standard_Real	TextureUOrigin () const

Standard_Real	TextureVOrigin () const

void	SetTextureOrigin (const Standard_Boolean theToSetTextureOrigin, const Standard_Real theUOrigin=0.0, const Standard_Real theVOrigin=0.0)
	Use this method to change the origin of the texture. The texel (0,0) will be mapped to the surface (UOrigin,VOrigin) More...

Standard_Boolean	TextureScale () const

Standard_Real	TextureScaleU () const

Standard_Real	TextureScaleV () const

void	SetTextureScale (const Standard_Boolean theToSetTextureScale, const Standard_Real theScaleU=1.0, const Standard_Real theScaleV=1.0)
	Use this method to scale the texture (percent of the face). You can specify a scale factor for both U and V. Example: if you set ScaleU and ScaleV to 0.5 and you enable texture repeat, the texture will appear twice on the face in each direction. More...

Standard_Boolean	ShowTriangles () const

void	ShowTriangles (const Standard_Boolean theToShowTriangles)
	Use this method to show the triangulation of the shape (for debugging etc.). More...

Standard_Boolean	TextureModulate () const

Public Member Functions inherited from AIS_Shape
	AIS_Shape (const TopoDS_Shape &shap)
	Initializes construction of the shape shap from wires, edges and vertices. More...

virtual Standard_Integer	Signature () const override
	Returns index 0. This value refers to SHAPE from TopAbs_ShapeEnum. More...

virtual AIS_KindOfInteractive	Type () const override
	Returns Object as the type of Interactive Object. More...

virtual Standard_Boolean	AcceptShapeDecomposition () const override
	Returns true if the Interactive Object accepts shape decomposition. More...

virtual Standard_Boolean	AcceptDisplayMode (const Standard_Integer theMode) const override
	Return true if specified display mode is supported. More...

const TopoDS_Shape &	Shape () const
	Returns this shape object. More...

void	SetShape (const TopoDS_Shape &theShape)
	Constructs an instance of the shape object theShape. More...

void	Set (const TopoDS_Shape &theShape)
	Alias for ::SetShape(). More...

Standard_Boolean	SetOwnDeviationCoefficient ()
	Sets a local value for deviation coefficient for this specific shape. More...

Standard_Boolean	SetOwnHLRDeviationCoefficient ()
	Sets a local value for HLR deviation coefficient for this specific shape. More...

Standard_Boolean	SetOwnDeviationAngle ()
	Sets a local value for deviation angle for this specific shape. More...

Standard_Boolean	SetOwnHLRDeviationAngle ()
	Sets a local value for HLR deviation angle for this specific shape. More...

void	SetOwnDeviationCoefficient (const Standard_Real aCoefficient)
	Sets a local value for deviation coefficient for this specific shape. More...

void	SetOwnHLRDeviationCoefficient (const Standard_Real aCoefficient)
	sets myOwnHLRDeviationCoefficient field in Prs3d_Drawer & recomputes presentation More...

void	SetAngleAndDeviation (const Standard_Real anAngle)
	this compute a new angle and Deviation from the value anAngle and set the values stored in myDrawer with these that become local to the shape More...

Standard_Real	UserAngle () const
	gives back the angle initial value put by the User. More...

void	SetOwnDeviationAngle (const Standard_Real anAngle)
	sets myOwnDeviationAngle field in Prs3d_Drawer & recomputes presentation More...

void	SetHLRAngleAndDeviation (const Standard_Real anAngle)
	this compute a new Angle and Deviation from the value anAngle for HLR and set the values stored in myDrawer for with these that become local to the shape More...

void	SetOwnHLRDeviationAngle (const Standard_Real anAngle)
	sets myOwnHLRDeviationAngle field in Prs3d_Drawer & recomputes presentation More...

Standard_Boolean	OwnDeviationCoefficient (Standard_Real &aCoefficient, Standard_Real &aPreviousCoefficient) const
	Returns true and the values of the deviation coefficient aCoefficient and the previous deviation coefficient aPreviousCoefficient. If these values are not already set, false is returned. More...

Standard_Boolean	OwnHLRDeviationCoefficient (Standard_Real &aCoefficient, Standard_Real &aPreviousCoefficient) const
	Returns true and the values of the HLR deviation coefficient aCoefficient and the previous HLR deviation coefficient aPreviousCoefficient. If these values are not already set, false is returned. More...

Standard_Boolean	OwnDeviationAngle (Standard_Real &anAngle, Standard_Real &aPreviousAngle) const
	Returns true and the values of the deviation angle anAngle and the previous deviation angle aPreviousAngle. If these values are not already set, false is returned. More...

Standard_Boolean	OwnHLRDeviationAngle (Standard_Real &anAngle, Standard_Real &aPreviousAngle) const
	Returns true and the values of the HLR deviation angle anAngle and of the previous HLR deviation angle aPreviousAngle. If these values are not already set, false is returned. More...

void	SetTypeOfHLR (const Prs3d_TypeOfHLR theTypeOfHLR)
	Sets the type of HLR algorithm used by the shape. More...

Prs3d_TypeOfHLR	TypeOfHLR () const
	Gets the type of HLR algorithm. More...

virtual void	SetWidth (const Standard_Real aValue) override
	Sets the value aValue for line width in the reconstructed compound shape. Changes line aspects for lines-only presentation modes like Wireframe and Bounding Box. Doesn't change face boundary line aspect. More...

virtual void	UnsetWidth () override
	Removes the setting for line width in the reconstructed compound shape. More...

virtual void	SetTransparency (const Standard_Real aValue=0.6) override
	Sets the value aValue for transparency in the reconstructed compound shape. More...

virtual void	UnsetTransparency () override
	Removes the setting for transparency in the reconstructed compound shape. More...

virtual const Bnd_Box &	BoundingBox ()
	Constructs a bounding box with which to reconstruct compound topological shapes for presentation. More...

virtual void	Color (Quantity_Color &aColor) const override
	Returns the Color attributes of the shape accordingly to the current facing model;. More...

virtual Graphic3d_NameOfMaterial	Material () const override
	Returns the NameOfMaterial attributes of the shape accordingly to the current facing model;. More...

virtual Standard_Real	Transparency () const override
	Returns the transparency attributes of the shape accordingly to the current facing model;. More...

const gp_Pnt2d &	TextureRepeatUV () const
	Return texture repeat UV values; (1, 1) by default. More...

void	SetTextureRepeatUV (const gp_Pnt2d &theRepeatUV)
	Sets the number of occurrences of the texture on each face. The texture itself is parameterized in (0,1) by (0,1). Each face of the shape to be textured is parameterized in UV space (Umin,Umax) by (Vmin,Vmax). More...

const gp_Pnt2d &	TextureOriginUV () const
	Return texture origin UV position; (0, 0) by default. More...

void	SetTextureOriginUV (const gp_Pnt2d &theOriginUV)
	Use this method to change the origin of the texture. The texel (0,0) will be mapped to the surface (myUVOrigin.X(), myUVOrigin.Y()). More...

const gp_Pnt2d &	TextureScaleUV () const
	Return scale factor for UV coordinates; (1, 1) by default. More...

void	SetTextureScaleUV (const gp_Pnt2d &theScaleUV)
	Use this method to scale the texture (percent of the face). You can specify a scale factor for both U and V. Example: if you set ScaleU and ScaleV to 0.5 and you enable texture repeat, the texture will appear twice on the face in each direction. More...

Public Member Functions inherited from AIS_InteractiveObject
void	SetCurrentFacingModel (const Aspect_TypeOfFacingModel aModel=Aspect_TOFM_BOTH_SIDE)
	change the current facing model apply on polygons for SetColor(), SetTransparency(), SetMaterial() methods default facing model is Aspect_TOFM_TWO_SIDE. This mean that attributes is applying both on the front and back face. More...

Aspect_TypeOfFacingModel	CurrentFacingModel () const
	Returns the current facing model which is in effect. More...

virtual Standard_Integer	DefaultDisplayMode () const
	Returns the default display mode. This method is to be implemented when the main mode is not mode 0. More...

void	Redisplay (const Standard_Boolean AllModes=Standard_False)
	Updates the active presentation; if <AllModes> = Standard_True all the presentations inside are recomputed. IMPORTANT: It is preferable to call Redisplay method of corresponding AIS_InteractiveContext instance for cases when it is accessible. This method just redirects call to myCTXPtr, so this class field must be up to date for proper result. More...

void	SetInfiniteState (const Standard_Boolean aFlag=Standard_True)
	Sets the infinite state flag aFlage. if <aFlag> = True , the interactiveObject is considered as infinite, i.e. its graphic presentations are not taken in account for View FitAll... More...

Standard_Boolean	IsInfinite () const
	Returns true if the interactive object is infinite. In this case, its graphic presentations are not taken into account in the fit-all view. More...

Standard_Boolean	HasInteractiveContext () const
	Indicates whether the Interactive Object has a pointer to an interactive context. More...

Handle< AIS_InteractiveContext >	GetContext () const
	Returns the context pointer to the interactive context. More...

virtual void	SetContext (const Handle< AIS_InteractiveContext > &aCtx)
	Sets the interactive context aCtx and provides a link to the default drawing tool or "Drawer" if there is none. More...

Standard_Boolean	HasOwner () const
	Returns true if the object has an owner attributed to it. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. More...

const Handle< Standard_Transient > &	GetOwner () const
	Returns the owner of the Interactive Object. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. There are two types of owners: More...

void	SetOwner (const Handle< Standard_Transient > &theApplicativeEntity)
	Allows you to attribute the owner theApplicativeEntity to an Interactive Object. This can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of. The owner takes the form of a transient. More...

void	ClearOwner ()
	Each Interactive Object has methods which allow us to attribute an Owner to it in the form of a Transient. This method removes the owner from the graphic entity. More...

Standard_Boolean	HasDisplayMode () const
	Returns true if the Interactive Object has a display mode setting. Otherwise, it is displayed in Neutral Point. More...

void	SetDisplayMode (const Standard_Integer aMode)
	Sets the display mode aMode for the interactive object. An object can have its own temporary display mode, which is different from that proposed by the interactive context. The range of possibilities currently proposed is the following: More...

void	UnsetDisplayMode ()
	Removes display mode settings from the interactive object. More...

Standard_Integer	DisplayMode () const
	Returns the display mode setting of the Interactive Object. The range of possibilities is the following: More...

Standard_Boolean	HasHilightMode () const
	Returns true if the Interactive Object is in highlight mode. More...

Standard_Integer	HilightMode () const
	Returns highlight display mode. This is obsolete method for backward compatibility - use ::HilightAttributes() and ::DynamicHilightAttributes() instead. More...

void	SetHilightMode (const Standard_Integer theMode)
	Sets highlight display mode. This is obsolete method for backward compatibility - use ::HilightAttributes() and ::DynamicHilightAttributes() instead. More...

void	UnsetHilightMode ()
	Unsets highlight display mode. More...

Standard_Boolean	HasColor () const
	Returns true if the Interactive Object has color. More...

Standard_Boolean	HasWidth () const
	Returns true if the Interactive Object has width. More...

Standard_Real	Width () const
	Returns the width setting of the Interactive Object. More...

Standard_Boolean	HasMaterial () const
	Returns true if the Interactive Object has a setting for material. More...

Standard_Boolean	IsTransparent () const
	Returns true if there is a transparency setting. More...

virtual void	UnsetAttributes () override
	Clears settings provided by the drawing tool aDrawer. More...

Standard_Boolean	HasPresentation () const
	Returns TRUE when this object has a presentation in the current DisplayMode() More...

Handle< Prs3d_Presentation >	Presentation () const
	Returns the current presentation of this object according to the current DisplayMode() More...

void	SetAspect (const Handle< Prs3d_BasicAspect > &anAspect)
	Sets the graphic basic aspect to the current presentation. More...

virtual void	SetPolygonOffsets (const Standard_Integer aMode, const Standard_ShortReal aFactor=1.0, const Standard_ShortReal aUnits=0.0)
	Sets up polygon offsets for this object. It modifies all existing presentations of <anObj> (if any), so it is reasonable to call this method after <anObj> has been displayed. Otherwise, Compute() method should pass Graphic3d_AspectFillArea3d aspect from <myDrawer> to Graphic3d_Group to make polygon offsets work. More...

virtual Standard_Boolean	HasPolygonOffsets () const
	Returns Standard_True if <myDrawer> has non-null shading aspect. More...

virtual void	PolygonOffsets (Standard_Integer &aMode, Standard_ShortReal &aFactor, Standard_ShortReal &aUnits) const
	Retrieves current polygon offsets settings from <myDrawer>. More...

virtual void	BoundingBox (Bnd_Box &theBndBox) override
	Returns bounding box of object correspondingly to its current display mode. More...

void	SetIsoOnTriangulation (const Standard_Boolean theIsEnabled)
	Enables or disables on-triangulation build of isolines according to the flag given. More...

void	SynchronizeAspects ()
	Synchronize presentation aspects after their modification. More...

Public Member Functions inherited from SelectMgr_SelectableObject
virtual	~SelectMgr_SelectableObject ()
	Clears all selections of the object. More...

void	RecomputePrimitives ()
	Re-computes the sensitive primitives for all modes. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection. More...

void	RecomputePrimitives (const Standard_Integer theMode)
	Re-computes the sensitive primitives which correspond to the <theMode>th selection mode. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection. More...

void	AddSelection (const Handle< SelectMgr_Selection > &aSelection, const Standard_Integer aMode)
	Adds the selection aSelection with the selection mode index aMode to this framework. More...

void	ClearSelections (const Standard_Boolean update=Standard_False)
	Empties all the selections in the SelectableObject <update> parameter defines whether all object's selections should be flagged for further update or not. This improved method can be used to recompute an object's selection (without redisplaying the object completely) when some selection mode is activated not for the first time. More...

const Handle< SelectMgr_Selection > &	Selection (const Standard_Integer theMode) const
	Returns the selection having specified selection mode or NULL. More...

Standard_Boolean	HasSelection (const Standard_Integer theMode) const
	Returns true if a selection corresponding to the selection mode theMode was computed for this object. More...

const SelectMgr_SequenceOfSelection &	Selections () const
	Return the sequence of selections. More...

	Standard_DEPRECATED ("Deprecated method, Selections() should be used instead") void Init()
	Begins the iteration scanning for sensitive primitives. More...

	Standard_DEPRECATED ("Deprecated method, Selections() should be used instead") Standard_Boolean More() const
	Continues the iteration scanning for sensitive primitives. More...

	Standard_DEPRECATED ("Deprecated method, Selections() should be used instead") void Next()
	Continues the iteration scanning for sensitive primitives. More...

	Standard_DEPRECATED ("Deprecated method, Selections() should be used instead") const Handle< SelectMgr_Selection > &CurrentSelection() const
	Returns the current selection in this framework. More...

void	ResetTransformation () override
	resets local transformation to identity. More...

virtual void	UpdateTransformation () override
	Recomputes the location of the selection aSelection. More...

virtual void	UpdateTransformations (const Handle< SelectMgr_Selection > &aSelection)
	Updates locations in all sensitive entities from <aSelection> and in corresponding entity owners. More...

virtual void	HilightSelected (const Handle< PrsMgr_PresentationManager3d > &PM, const SelectMgr_SequenceOfOwner &Seq)
	Method which draws selected owners ( for fast presentation draw ) More...

virtual void	ClearSelected ()
	Method which clear all selected owners belonging to this selectable object ( for fast presentation draw ) More...

virtual void	ClearDynamicHighlight (const Handle< PrsMgr_PresentationManager3d > &theMgr)
	Method that needs to be implemented when the object manages selection and dynamic highlighting on its own. Clears or invalidates dynamic highlight presentation. By default it clears immediate draw of given presentation manager. More...

virtual void	HilightOwnerWithColor (const Handle< PrsMgr_PresentationManager3d > &thePM, const Handle< Prs3d_Drawer > &theStyle, const Handle< SelectMgr_EntityOwner > &theOwner)
	Method which hilight an owner belonging to this selectable object ( for fast presentation draw ) More...

virtual Standard_Boolean	IsAutoHilight () const
	If returns True, the old mechanism for highlighting selected objects is used (HilightSelected Method may be empty). If returns False, the HilightSelected method will be fully responsible for highlighting selected entity owners belonging to this selectable object. More...

virtual void	SetAutoHilight (const Standard_Boolean newAutoHilight)
	Set AutoHilight property to true or false Sets up Transform Persistence Mode for this object. More...

Handle< Prs3d_Presentation >	GetHilightPresentation (const Handle< PrsMgr_PresentationManager3d > &TheMgr)

Handle< Prs3d_Presentation >	GetSelectPresentation (const Handle< PrsMgr_PresentationManager3d > &TheMgr)

virtual void	ErasePresentations (Standard_Boolean theToRemove)
	Removes presentations returned by GetHilightPresentation() and GetSelectPresentation(). More...

virtual void	SetZLayer (const Graphic3d_ZLayerId theLayerId) override
	Set Z layer ID and update all presentations of the selectable object. The layers mechanism allows drawing objects in higher layers in overlay of objects in lower layers. More...

void	UpdateSelection (const Standard_Integer theMode=-1)
	Sets update status FULL to selections of the object. Must be used as the only method of UpdateSelection from outer classes to prevent BVH structures from being outdated. More...

void	SetAssemblyOwner (const Handle< SelectMgr_EntityOwner > &theOwner, const Standard_Integer theMode=-1)
	Sets common entity owner for assembly sensitive object entities. More...

Bnd_Box	BndBoxOfSelected (const Handle< SelectMgr_IndexedMapOfOwner > &theOwners)
	Returns a bounding box of sensitive entities with the owners given if they are a part of activated selection. More...

Standard_Integer	GlobalSelectionMode () const
	Returns the mode for selection of object as a whole. More...

virtual Handle< SelectMgr_EntityOwner >	GlobalSelOwner () const
	Returns the owner of mode for selection of object as a whole. More...

virtual const Handle< SelectMgr_EntityOwner > &	GetAssemblyOwner () const
	Returns common entity owner if the object is an assembly. More...

Public Member Functions inherited from PrsMgr_PresentableObject
PrsMgr_Presentations &	Presentations ()

PrsMgr_TypeOfPresentation3d	TypeOfPresentation3d () const
	Returns information on whether the object accepts display in HLR mode or not. More...

const Handle< Graphic3d_TransformPers > &	TransformPersistence () const
	Returns Transformation Persistence defining a special Local Coordinate system where this presentable object is located or NULL handle if not defined. Position of the object having Transformation Persistence is mutable and depends on camera position. The same applies to a bounding box of the object. More...

virtual void	SetTransformPersistence (const Handle< Graphic3d_TransformPers > &theTrsfPers)
	Sets up Transform Persistence defining a special Local Coordinate system where this object should be located. Note that management of Transform Persistence object is more expensive than of the normal one, because it requires its position being recomputed basing on camera position within each draw call / traverse. More...

	Standard_DEPRECATED ("This method is deprecated - SetTransformPersistence() taking Graphic3d_TransformPers should be called instead") void SetTransformPersistence(const Graphic3d_TransModeFlags theMode
	Sets up Transform Persistence Mode for this object. This function used to lock in object position, rotation and / or zooming relative to camera position. Object will be drawn in the origin setted by thePoint parameter (except Graphic3d_TMF_TriedronPers flag. More...

void	SetTypeOfPresentation (const PrsMgr_TypeOfPresentation3d aType)

void	SetToUpdate (const Standard_Integer aMode)
	flags the Prs of mode <AMode> to be Updated. the Update will be done when needed. More...

void	SetToUpdate ()
	flags all the Presentations to be Updated. More...

void	ToBeUpdated (TColStd_ListOfInteger &ListOfMode) const
	gives the list of modes which are flagged "to be updated". More...

const Handle< Geom_Transformation > &	LocalTransformationGeom () const
	Return the local transformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...

void	SetLocalTransformation (const gp_Trsf &theTrsf)
	Sets local transformation to theTransformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...

void	SetLocalTransformation (const Handle< Geom_Transformation > &theTrsf)
	Sets local transformation to theTransformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...

Standard_Boolean	HasTransformation () const
	Returns true if object has a transformation that is different from the identity. More...

const Handle< Geom_Transformation > &	TransformationGeom () const
	Return the transformation taking into account transformation of parent object(s). Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...

const gp_Trsf &	LocalTransformation () const
	Return the local transformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...

const gp_Trsf &	Transformation () const
	Return the transformation taking into account transformation of parent object(s). Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...

const gp_GTrsf &	InversedTransformation () const

virtual void	UpdateTransformation (const Handle< Prs3d_Presentation > &P)

Graphic3d_ZLayerId	ZLayer () const
	Get ID of Z layer. More...

virtual void	AddClipPlane (const Handle< Graphic3d_ClipPlane > &thePlane)
	Adds clip plane for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be substracted from limit to predict the maximum possible number of object clipping planes. More...

virtual void	RemoveClipPlane (const Handle< Graphic3d_ClipPlane > &thePlane)
	Removes previously added clip plane. More...

virtual void	SetClipPlanes (const Handle< Graphic3d_SequenceOfHClipPlane > &thePlanes)
	Set clip planes for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be subtracted from limit to predict the maximum possible number of object clipping planes. More...

	Standard_DEPRECATED ("This method is deprecated - overload taking Handle should be used instead") void SetClipPlanes(const Graphic3d_SequenceOfHClipPlane &thePlanes)

const Handle< Graphic3d_SequenceOfHClipPlane > &	ClipPlanes () const
	Get clip planes. More...

virtual void	SetMutable (const Standard_Boolean theIsMutable)
	Sets if the object has mutable nature (content or location will be changed regularly). This method should be called before object displaying to take effect. More...

Standard_Boolean	IsMutable () const
	Returns true if object has mutable nature (content or location are be changed regularly). Mutable object will be managed in different way than static onces (another optimizations). More...

virtual void	AddChild (const Handle< PrsMgr_PresentableObject > &theObject)
	Makes theObject child of current object in scene hierarchy. More...

virtual void	RemoveChild (const Handle< PrsMgr_PresentableObject > &theObject)
	Removes theObject from children of current object in scene hierarchy. More...

const PrsMgr_ListOfPresentableObjects &	Children () const
	Returns children of the current object. More...

Standard_Boolean	HasOwnPresentations () const
	Returns true if object should have own presentations. More...

PrsMgr_PresentableObjectPointer	Parent () const
	Returns parent of current object in scene hierarchy. More...

virtual void	SetAttributes (const Handle< Prs3d_Drawer > &theDrawer)
	Initializes the drawing tool theDrawer. More...

const Handle< Prs3d_Drawer > &	Attributes () const
	Returns the attributes settings. More...

const Handle< Prs3d_Drawer > &	HilightAttributes () const
	Returns the hilight attributes settings. When not NULL, overrides both Prs3d_TypeOfHighlight_LocalSelected and Prs3d_TypeOfHighlight_Selected defined within AIS_InteractiveContext. More...

virtual void	SetHilightAttributes (const Handle< Prs3d_Drawer > &theDrawer)
	Initializes the hilight drawing tool theDrawer. More...

const Handle< Prs3d_Drawer > &	DynamicHilightAttributes () const
	Returns the hilight attributes settings. When not NULL, overrides both Prs3d_TypeOfHighlight_LocalDynamic and Prs3d_TypeOfHighlight_Dynamic defined within AIS_InteractiveContext. More...

virtual void	SetDynamicHilightAttributes (const Handle< Prs3d_Drawer > &theDrawer)
	Initializes the dynamic hilight drawing tool. More...

virtual void	UnsetHilightAttributes ()
	Clears settings provided by the hilight drawing tool theDrawer. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Protected Member Functions
overridden methods
virtual void	Compute (const Handle< PrsMgr_PresentationManager3d > &thePrsMgr, const Handle< Prs3d_Presentation > &thePrs, const Standard_Integer theMode) override
	Compute presentation with texture mapping support. More...

void	updateAttributes (const Handle< Prs3d_Presentation > &thePrs)
	Compute presentation with texture mapping support. More...

Protected Member Functions inherited from AIS_Shape
virtual void	Compute (const Handle< Prs3d_Projector > &theProjector, const Handle< Prs3d_Presentation > &thePrs) override
	Compute projected presentation. More...

virtual void	Compute (const Handle< Prs3d_Projector > &theProjector, const Handle< Geom_Transformation > &theTrsf, const Handle< Prs3d_Presentation > &thePrs) override
	Compute projected presentation with transformation. More...

virtual void	ComputeSelection (const Handle< SelectMgr_Selection > &theSelection, const Standard_Integer theMode) override
	Compute selection. More...

void	LoadRecomputable (const Standard_Integer TheMode)
	shape to display More...

void	setColor (const Handle< Prs3d_Drawer > &theDrawer, const Quantity_Color &theColor) const
	shape to display More...

void	setWidth (const Handle< Prs3d_Drawer > &theDrawer, const Standard_Real theWidth) const
	shape to display More...

void	setTransparency (const Handle< Prs3d_Drawer > &theDrawer, const Standard_Real theValue) const
	shape to display More...

void	setMaterial (const Handle< Prs3d_Drawer > &theDrawer, const Graphic3d_MaterialAspect &theMaterial, const Standard_Boolean theToKeepColor, const Standard_Boolean theToKeepTransp) const
	shape to display More...

Protected Member Functions inherited from AIS_InteractiveObject
	AIS_InteractiveObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)
	The TypeOfPresention3d means that the interactive object may have a presentation dependant of the view of Display. More...

Protected Member Functions inherited from SelectMgr_SelectableObject
	SelectMgr_SelectableObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)

void	setGlobalSelMode (const Standard_Integer theMode)

virtual void	updateSelection (const Standard_Integer theMode)

Protected Member Functions inherited from PrsMgr_PresentableObject
	PrsMgr_PresentableObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)

virtual	~PrsMgr_PresentableObject ()

void	Update (const Standard_Boolean AllModes=Standard_False)
	recomputes all presentations of the object. More...

void	Update (const Standard_Integer aMode, const Standard_Boolean ClearOther)
	Recomputes the presentation in the given mode. If ClearOther is true, other presentation will be cleared. More...

virtual void	Fill (const Handle< PrsMgr_PresentationManager > &aPresentationManager, const Handle< PrsMgr_Presentation > &aPresentation, const Standard_Integer aMode)
	High-level interface for controlling polygon offsets. More...

virtual void	SetCombinedParentTransform (const Handle< Geom_Transformation > &theTrsf)
	Sets myCombinedParentTransform to theTransformation. Thus object receives transformation from parent node and able to derive its own. More...

virtual void	UpdateClipping ()
	General virtual method for internal update of presentation state when some modifications on list of clip planes occurs. Base implementation propagate clip planes to every presentation. More...

virtual void	setLocalTransformation (const Handle< Geom_Transformation > &theTransformation)
	Sets local transformation to theTransformation. More...

Protected Attributes
presentation fields
Handle< Graphic3d_Texture2Dmanual >	myTexture

Handle< Graphic3d_AspectFillArea3d >	myAspect

texture source fields
Handle< Image_PixMap >	myTexturePixMap

TCollection_AsciiString	myTextureFile

Graphic3d_NameOfTexture2D	myPredefTexture

texture mapping properties
Standard_Boolean	myToMapTexture

Standard_Boolean	myModulate

Standard_Boolean	myIsCustomOrigin

Standard_Boolean	myToRepeat

Standard_Boolean	myToScale

Standard_Boolean	myToShowTriangles

Protected Attributes inherited from AIS_Shape
TopoDS_Shape	myshape
	shape to display More...

Bnd_Box	myBB
	cached bounding box of the shape More...

gp_Pnt2d	myUVOrigin
	UV origin vector for generating texture coordinates. More...

gp_Pnt2d	myUVRepeat
	UV repeat vector for generating texture coordinates. More...

gp_Pnt2d	myUVScale
	UV scale vector for generating texture coordinates. More...

Standard_Real	myInitAng
	shape to display More...

Standard_Boolean	myCompBB
	if TRUE, then bounding box should be recomputed More...

Protected Attributes inherited from AIS_InteractiveObject
TColStd_ListOfInteger	myToRecomputeModes

Standard_Real	myOwnWidth

Aspect_TypeOfFacingModel	myCurrentFacingModel

Standard_Boolean	myInfiniteState

Standard_Boolean	hasOwnColor

Standard_Boolean	hasOwnMaterial

Standard_Boolean	myRecomputeEveryPrs

Protected Attributes inherited from SelectMgr_SelectableObject
SelectMgr_SequenceOfSelection	myselections

Handle< Prs3d_Presentation >	mySelectionPrs

Handle< Prs3d_Presentation >	myHilightPrs

Standard_Boolean	myAutoHilight

Protected Attributes inherited from PrsMgr_PresentableObject
PrsMgr_Presentations	myPresentations

Handle< Graphic3d_SequenceOfHClipPlane >	myClipPlanes

Handle< Prs3d_Drawer >	myDrawer

Handle< Prs3d_Drawer >	myHilightDrawer

Handle< Prs3d_Drawer >	myDynHilightDrawer

PrsMgr_TypeOfPresentation3d	myTypeOfPresentation3d

Standard_Boolean	myIsMutable

Standard_Boolean	myHasOwnPresentations

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from AIS_Shape
static TopAbs_ShapeEnum	SelectionType (const Standard_Integer theSelMode)
	Return shape type for specified selection mode. More...

static Standard_Integer	SelectionMode (const TopAbs_ShapeEnum theShapeType)
	Return selection mode for specified shape type. More...

static void	computeHlrPresentation (const Handle< Prs3d_Projector > &theProjector, const Handle< Prs3d_Presentation > &thePrs, const TopoDS_Shape &theShape, const Handle< Prs3d_Drawer > &theDrawer)
	Compute HLR presentation for specified shape. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Data Fields inherited from PrsMgr_PresentableObject
const gp_Pnt &	thePoint

Detailed Description

This class allows to map textures on shapes. Presentations modes AIS_WireFrame (0) and AIS_Shaded (1) behave in the same manner as in AIS_Shape, whilst new modes 2 (bounding box) and 3 (texture mapping) extends it functionality.

The texture itself is parametrized in (0,1)x(0,1). Each face of a shape located in UV space is provided with these parameters:

Umin - starting position in U
Umax - ending position in U
Vmin - starting position in V
Vmax - ending position in V Each face is triangulated and a texel is assigned to each node. Facets are then filled using a linear interpolation of texture between each 'three texels'. User can act on:
the number of occurrences of the texture on the face
the position of the origin of the texture
the scale factor of the texture

Constructor & Destructor Documentation

◆ AIS_TexturedShape()

AIS_TexturedShape::AIS_TexturedShape ( const TopoDS_Shape & theShape )

Initializes the textured shape.

Member Function Documentation

◆ Compute()

virtual void AIS_TexturedShape::Compute	(	const Handle< PrsMgr_PresentationManager3d > &	thePrsMgr,
		const Handle< Prs3d_Presentation > &	thePrs,
		const Standard_Integer	theMode
	)

overrideprotectedvirtual

Compute presentation with texture mapping support.

Reimplemented from AIS_Shape.

◆ DisableTextureModulate()

void AIS_TexturedShape::DisableTextureModulate ( )

Disables texture modulation.

◆ EnableTextureModulate()

void AIS_TexturedShape::EnableTextureModulate ( )

Enables texture modulation.

◆ SetColor()

virtual void AIS_TexturedShape::SetColor ( const Quantity_Color & theColor )

overridevirtual

Sets the color.

Reimplemented from AIS_Shape.

◆ SetMaterial()

virtual void AIS_TexturedShape::SetMaterial ( const Graphic3d_MaterialAspect & theAspect )

overridevirtual

Sets the material aspect.

Reimplemented from AIS_Shape.

◆ SetTextureFileName()

virtual void AIS_TexturedShape::SetTextureFileName ( const TCollection_AsciiString & theTextureFileName )

virtual

Sets the texture source. <theTextureFileName> can specify path to texture image or one of the standard predefined textures. The accepted file types are those used in Image_AlienPixMap with extensions such as rgb, png, jpg and more. To specify the standard predefined texture, the <theTextureFileName> should contain integer - the Graphic3d_NameOfTexture2D enumeration index. Setting texture source using this method resets the source pixmap (if was set previously).

◆ SetTextureMapOff()

void AIS_TexturedShape::SetTextureMapOff ( )

Disables texture mapping.

◆ SetTextureMapOn()

void AIS_TexturedShape::SetTextureMapOn ( )

Enables texture mapping.

◆ SetTextureOrigin()

void AIS_TexturedShape::SetTextureOrigin	(	const Standard_Boolean	theToSetTextureOrigin,
		const Standard_Real	theUOrigin = `0.0`,
		const Standard_Real	theVOrigin = `0.0`
	)

Use this method to change the origin of the texture. The texel (0,0) will be mapped to the surface (UOrigin,VOrigin)

◆ SetTexturePixMap()

virtual void AIS_TexturedShape::SetTexturePixMap ( const Handle< Image_PixMap > & theTexturePixMap )

virtual

Sets the texture source. <theTexturePixMap> specifies image data. Please note that the data should be in Bottom-Up order, the flag of Image_PixMap::IsTopDown() will be ignored by graphic driver. Setting texture source using this method resets the source by filename (if was set previously).

◆ SetTextureRepeat()

void AIS_TexturedShape::SetTextureRepeat	(	const Standard_Boolean	theToRepeat,
		const Standard_Real	theURepeat = `1.0`,
		const Standard_Real	theVRepeat = `1.0`
	)

Sets the number of occurrences of the texture on each face. The texture itself is parameterized in (0,1) by (0,1). Each face of the shape to be textured is parameterized in UV space (Umin,Umax) by (Vmin,Vmax). If RepeatYN is set to false, texture coordinates are clamped in the range (0,1)x(0,1) of the face.

◆ SetTextureScale()

void AIS_TexturedShape::SetTextureScale	(	const Standard_Boolean	theToSetTextureScale,
		const Standard_Real	theScaleU = `1.0`,
		const Standard_Real	theScaleV = `1.0`
	)

Use this method to scale the texture (percent of the face). You can specify a scale factor for both U and V. Example: if you set ScaleU and ScaleV to 0.5 and you enable texture repeat, the texture will appear twice on the face in each direction.

◆ ShowTriangles() [1/2]

Standard_Boolean AIS_TexturedShape::ShowTriangles ( ) const

inline

Returns: true if displaying of triangles is requested

◆ ShowTriangles() [2/2]

void AIS_TexturedShape::ShowTriangles ( const Standard_Boolean theToShowTriangles )

Use this method to show the triangulation of the shape (for debugging etc.).

◆ TextureFile()

Standard_CString AIS_TexturedShape::TextureFile ( ) const

inline

Returns: path to the texture file

◆ TextureMapState()

Standard_Boolean AIS_TexturedShape::TextureMapState ( ) const

inline

Returns: flag to control texture mapping (for presentation mode 3)

◆ TextureModulate()

Standard_Boolean AIS_TexturedShape::TextureModulate ( ) const

inline

Returns: true if texture color modulation is turned on

◆ TextureOrigin()

Standard_Boolean AIS_TexturedShape::TextureOrigin ( ) const

inline

Returns: true if texture UV origin has been modified

◆ TexturePixMap()

const Handle< Image_PixMap >& AIS_TexturedShape::TexturePixMap ( ) const

inline

Returns: the source pixmap for texture map

◆ TextureRepeat()

Standard_Boolean AIS_TexturedShape::TextureRepeat ( ) const

inline

Returns: texture repeat flag

◆ TextureScale()

Standard_Boolean AIS_TexturedShape::TextureScale ( ) const

inline

Returns: true if scale factor should be applied to texture mapping

◆ TextureScaleU()

Standard_Real AIS_TexturedShape::TextureScaleU ( ) const

inline

Returns: scale factor for U coordinate (1.0 by default)

◆ TextureScaleV()

Standard_Real AIS_TexturedShape::TextureScaleV ( ) const

inline

Returns: scale factor for V coordinate (1.0 by default)

◆ TextureUOrigin()

Standard_Real AIS_TexturedShape::TextureUOrigin ( ) const

inline

Returns: texture origin U position (0.0 by default)

◆ TextureVOrigin()

Standard_Real AIS_TexturedShape::TextureVOrigin ( ) const

inline

Returns: texture origin V position (0.0 by default)

◆ UnsetColor()

virtual void AIS_TexturedShape::UnsetColor ( )

overridevirtual

Removes settings for the color.

Reimplemented from AIS_Shape.

◆ UnsetMaterial()

virtual void AIS_TexturedShape::UnsetMaterial ( )

overridevirtual

Removes settings for material aspect.

Reimplemented from AIS_Shape.

◆ UpdateAttributes()

void AIS_TexturedShape::UpdateAttributes ( )

Use this method to display the textured shape without recomputing the whole presentation. Use this method when ONLY the texture content has been changed. If other parameters (ie: scale factors, texture origin, texture repeat...) have changed, the whole presentation has to be recomputed:

if (myShape->DisplayMode() == 3)
{
  myAISContext->RecomputePrsOnly (myShape);
}
else
{
  myAISContext->SetDisplayMode (myShape, 3, Standard_False);
  myAISContext->Display        (myShape, Standard_True);
}

◆ updateAttributes()

void AIS_TexturedShape::updateAttributes ( const Handle< Prs3d_Presentation > & thePrs )

protected

Compute presentation with texture mapping support.

◆ URepeat()

Standard_Real AIS_TexturedShape::URepeat ( ) const

inline

Returns: texture repeat U value

◆ VRepeat()

Standard_Real AIS_TexturedShape::VRepeat ( ) const

inline

Returns: texture repeat V value

Field Documentation

◆ myAspect

Handle< Graphic3d_AspectFillArea3d > AIS_TexturedShape::myAspect

protected

◆ myIsCustomOrigin

Standard_Boolean AIS_TexturedShape::myIsCustomOrigin

protected

◆ myModulate

Standard_Boolean AIS_TexturedShape::myModulate

protected

◆ myPredefTexture

Graphic3d_NameOfTexture2D AIS_TexturedShape::myPredefTexture

protected

◆ myTexture

Handle< Graphic3d_Texture2Dmanual > AIS_TexturedShape::myTexture

protected

◆ myTextureFile

TCollection_AsciiString AIS_TexturedShape::myTextureFile

protected

◆ myTexturePixMap

Handle< Image_PixMap > AIS_TexturedShape::myTexturePixMap

protected

◆ myToMapTexture

Standard_Boolean AIS_TexturedShape::myToMapTexture

protected

◆ myToRepeat

Standard_Boolean AIS_TexturedShape::myToRepeat

protected

◆ myToScale

Standard_Boolean AIS_TexturedShape::myToScale

protected

◆ myToShowTriangles

Standard_Boolean AIS_TexturedShape::myToShowTriangles

protected

The documentation for this class was generated from the following file:

AIS_TexturedShape.hxx

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ AIS_TexturedShape()

Member Function Documentation

◆ Compute()

◆ DisableTextureModulate()

◆ EnableTextureModulate()

◆ SetColor()

◆ SetMaterial()

◆ SetTextureFileName()

◆ SetTextureMapOff()

◆ SetTextureMapOn()

◆ SetTextureOrigin()

◆ SetTexturePixMap()

◆ SetTextureRepeat()

◆ SetTextureScale()

◆ ShowTriangles() [1/2]

◆ ShowTriangles() [2/2]

◆ TextureFile()

◆ TextureMapState()

◆ TextureModulate()

◆ TextureOrigin()

◆ TexturePixMap()

◆ TextureRepeat()

◆ TextureScale()

◆ TextureScaleU()

◆ TextureScaleV()

◆ TextureUOrigin()

◆ TextureVOrigin()

◆ UnsetColor()

◆ UnsetMaterial()

◆ UpdateAttributes()

◆ updateAttributes()

◆ URepeat()

◆ VRepeat()

Field Documentation

◆ myAspect

◆ myIsCustomOrigin

◆ myModulate

◆ myPredefTexture

◆ myTexture

◆ myTextureFile

◆ myTexturePixMap

◆ myToMapTexture

◆ myToRepeat

◆ myToScale

◆ myToShowTriangles