The algorithm to build a Section between the arguments. The Section consists of vertices and edges. The Section contains: More...

#include <BOPAlgo_Section.hxx>

Inheritance diagram for BOPAlgo_Section:

[legend]

Public Member Functions
	BOPAlgo_Section ()
	Empty constructor. More...

virtual	~BOPAlgo_Section ()

	BOPAlgo_Section (const Handle< NCollection_BaseAllocator > &theAllocator)
	Constructor with allocator. More...

Public Member Functions inherited from BOPAlgo_Builder
	BOPAlgo_Builder ()
	Empty constructor. More...

virtual	~BOPAlgo_Builder ()

	BOPAlgo_Builder (const Handle< NCollection_BaseAllocator > &theAllocator)

virtual void	Clear () override
	Clears the content of the algorithm. More...

BOPAlgo_PPaveFiller	PPaveFiller ()
	Returns the PaveFiller, algorithm for sub-shapes intersection. More...

BOPDS_PDS	PDS ()
	Returns the Data Structure, holder of intersection information. More...

Handle< IntTools_Context >	Context () const
	Returns the Context, tool for cashing heavy algorithms. More...

virtual void	AddArgument (const TopoDS_Shape &theShape)
	Adds the argument to the operation. More...

virtual void	SetArguments (const TopTools_ListOfShape &theLS)
	Sets the list of arguments for the operation. More...

const TopTools_ListOfShape &	Arguments () const
	Returns the list of arguments. More...

void	SetNonDestructive (const Standard_Boolean theFlag)
	Sets the flag that defines the mode of treatment. In non-destructive mode the argument shapes are not modified. Instead a copy of a sub-shape is created in the result if it is needed to be updated. This flag is taken into account if internal PaveFiller is used only. In the case of calling PerformWithFiller the corresponding flag of that PaveFiller is in force. More...

Standard_Boolean	NonDestructive () const
	Returns the flag that defines the mode of treatment. In non-destructive mode the argument shapes are not modified. Instead a copy of a sub-shape is created in the result if it is needed to be updated. More...

void	SetGlue (const BOPAlgo_GlueEnum theGlue)
	Sets the glue option for the algorithm. More...

BOPAlgo_GlueEnum	Glue () const
	Returns the glue option of the algorithm. More...

void	SetCheckInverted (const Standard_Boolean theCheck)
	Enables/Disables the check of the input solids for inverted status. More...

Standard_Boolean	CheckInverted () const
	Returns the flag defining whether the check for input solids on inverted status should be performed or not. More...

virtual void	Perform () override
	Performs the operation. The intersection will be performed also. More...

virtual void	PerformWithFiller (const BOPAlgo_PaveFiller &theFiller)
	Performs the operation with the prepared filler. The intersection will not be performed in this case. More...

const TopTools_DataMapOfShapeListOfShape &	Images () const
	Returns the map of images. More...

const TopTools_DataMapOfShapeListOfShape &	Origins () const
	Returns the map of origins. More...

const TopTools_DataMapOfShapeShape &	ShapesSD () const
	Returns the map of Same Domain (SD) shapes - coinciding shapes from different arguments. More...

virtual const TopTools_ListOfShape &	Generated (const TopoDS_Shape &theS) override
	Returns the list of shapes generated from the shape theS. More...

virtual const TopTools_ListOfShape &	Modified (const TopoDS_Shape &theS) override
	Returns the list of shapes modified from the shape theS. More...

virtual Standard_Boolean	IsDeleted (const TopoDS_Shape &theS) override
	Returns true if the shape theS has been deleted. More...

Public Member Functions inherited from BOPAlgo_BuilderShape
const TopoDS_Shape &	Shape () const
	Returns the result of algorithm. More...

Standard_Boolean	HasDeleted () const
	Returns true if the at least one shape(or subshape) of arguments has been deleted. More...

Standard_Boolean	HasGenerated () const
	Returns true if the at least one shape(or subshape) of arguments has generated shapes. More...

Standard_Boolean	HasModified () const
	Returns true if the at least one shape(or subshape) of arguments has modified shapes. More...

const TopTools_IndexedDataMapOfShapeListOfShape &	ImagesResult () const

Public Member Functions inherited from BOPAlgo_Options
	BOPAlgo_Options ()
	Empty constructor. More...

	BOPAlgo_Options (const Handle< NCollection_BaseAllocator > &theAllocator)
	Constructor with allocator. More...

virtual	~BOPAlgo_Options ()
	Destructor. More...

const Handle< NCollection_BaseAllocator > &	Allocator () const
	Returns allocator. More...

void	AddError (const Handle< Message_Alert > &theAlert)
	Adds the alert as error (fail) More...

void	AddWarning (const Handle< Message_Alert > &theAlert)
	Adds the alert as warning. More...

Standard_Boolean	HasErrors () const
	Returns true if algorithm has failed. More...

Standard_Boolean	HasError (const Handle< Standard_Type > &theType) const
	Returns true if algorithm has generated error of specified type. More...

Standard_Boolean	HasWarnings () const
	Returns true if algorithm has generated some warning alerts. More...

Standard_Boolean	HasWarning (const Handle< Standard_Type > &theType) const
	Returns true if algorithm has generated warning of specified type. More...

const Handle< Message_Report > &	GetReport () const
	Returns report collecting all errors and warnings. More...

void	DumpErrors (Standard_OStream &theOS) const
	Dumps the error status into the given stream. More...

void	DumpWarnings (Standard_OStream &theOS) const
	Dumps the warning statuses into the given stream. More...

void	ClearWarnings ()
	Clears the warnings of the algorithm. More...

void	SetFuzzyValue (const Standard_Real theFuzz)
	Sets the additional tolerance. More...

Standard_Real	FuzzyValue () const
	Returns the additional tolerance. More...

void	SetProgressIndicator (const Handle< Message_ProgressIndicator > &theObj)
	Set the Progress Indicator object. More...

void	SetRunParallel (const Standard_Boolean theFlag)
	Set the flag of parallel processing if <theFlag> is true the parallel processing is switched on if <theFlag> is false the parallel processing is switched off. More...

Standard_Boolean	RunParallel () const
	Returns the flag of parallel processing. More...

void	SetUseOBB (const Standard_Boolean theUseOBB)
	Enables/Disables the usage of OBB. More...

Standard_Boolean	UseOBB () const
	Returns the flag defining usage of OBB. More...

Protected Member Functions
virtual void	CheckData () override
	Checks the data before performing the operation. More...

virtual void	BuildSection ()
	Combine the result of section operation. More...

virtual void	PerformInternal1 (const BOPAlgo_PaveFiller &thePF) override
	Performs calculations using prepared Filler object <thePF> More...

Protected Member Functions inherited from BOPAlgo_Builder
virtual void	PerformInternal (const BOPAlgo_PaveFiller &thePF)
	Performs the building of the result. The method calls the PerfromInternal1() method surrounded by a try-catch block. More...

virtual void	BuildResult (const TopAbs_ShapeEnum theType)
	Builds the result of operation. The method is called for each of the arguments type and adds into the result the splits of the arguments of that type. More...

void	CheckFiller ()
	Checks if the intersection algorithm has Errors/Warnings. More...

virtual void	Prepare ()
	Prepares the result shape by making it empty compound. More...

void	FillImagesVertices ()
	Fills the images of vertices. More...

void	FillImagesEdges ()
	Fills the images of edges. More...

void	FillImagesContainers (const TopAbs_ShapeEnum theType)
	Fills the images of containers (WIRES/SHELLS/COMPSOLID). More...

void	FillImagesContainer (const TopoDS_Shape &theS, const TopAbs_ShapeEnum theType)
	Builds the image of the given container using the splits of its sub-shapes. More...

void	FillImagesFaces ()
	Fills the images of faces. The method consists of three steps: More...

virtual void	BuildSplitFaces ()
	Builds the splits of faces using the information from the intersection stage stored in Data Structure. More...

void	FillSameDomainFaces ()
	Looks for the same domain faces among the splits of the faces. Updates the map of images with SD faces. More...

void	FillInternalVertices ()
	Classifies the alone vertices on faces relatively its splits and adds them as INTERNAL into the splits. More...

void	FillImagesSolids ()
	Fills the images of solids. The method consists of four steps: More...

void	BuildDraftSolid (const TopoDS_Shape &theSolid, TopoDS_Shape &theDraftSolid, TopTools_ListOfShape &theLIF)
	Builds the draft solid by rebuilding the shells of the solid with the splits of faces. More...

virtual void	FillIn3DParts (TopTools_DataMapOfShapeListOfShape &theInParts, TopTools_DataMapOfShapeShape &theDraftSolids, const Handle< NCollection_BaseAllocator > &theAllocator)
	Finds faces located inside each solid. More...

void	BuildSplitSolids (TopTools_DataMapOfShapeListOfShape &theInParts, TopTools_DataMapOfShapeShape &theDraftSolids, const Handle< NCollection_BaseAllocator > &theAllocator)
	Builds the splits of the solids using their draft versions and faces located inside. More...

void	FillInternalShapes ()
	Classifies the vertices and edges from the arguments relatively splits of solids and makes them INTERNAL for solids. More...

void	FillImagesCompounds ()
	Fills the images of compounds. More...

void	FillImagesCompound (const TopoDS_Shape &theS, TopTools_MapOfShape &theMF)
	Builds the image of the given compound. More...

virtual void	PostTreat ()
	Post treatment of the result of the operation. The method checks validity of the sub-shapes of the result and updates the tolerances to make them valid. More...

virtual void	PrepareHistory () override
	Prepare information for history support. More...

virtual const TopTools_ListOfShape *	LocModified (const TopoDS_Shape &theS)
	Prepare history information for the input shapes taking into account possible operation-specific modifications. For instance, in the CellsBuilder operation, additionally to splitting input shapes the splits of the shapes (or the shapes themselves) may be unified during removal of internal boundaries. In this case each split should be linked to the unified shape. More...

Protected Member Functions inherited from BOPAlgo_BuilderShape
	BOPAlgo_BuilderShape ()

virtual	~BOPAlgo_BuilderShape ()

	BOPAlgo_BuilderShape (const Handle< NCollection_BaseAllocator > &theAllocator)

Protected Member Functions inherited from BOPAlgo_Algo
	BOPAlgo_Algo ()
	Default constructor. More...

virtual	~BOPAlgo_Algo ()

	BOPAlgo_Algo (const Handle< NCollection_BaseAllocator > &theAllocator)

virtual void	CheckResult ()
	Checks the obtained result. More...

Protected Member Functions inherited from BOPAlgo_Options
void	UserBreak () const
	Breaks the execution if the break signal is indicated by myProgressIndicator. More...

Additional Inherited Members
Static Public Member Functions inherited from BOPAlgo_Options
static Standard_Boolean	GetParallelMode ()
	Gets the global parallel mode. More...

static void	SetParallelMode (const Standard_Boolean theNewMode)
	Sets the global parallel mode. More...

Protected Attributes inherited from BOPAlgo_Builder
TopTools_ListOfShape	myArguments
	Arguments of the operation. More...

TopTools_MapOfShape	myMapFence
	Fence map providing the uniqueness of the shapes in the list of arguments. More...

BOPAlgo_PPaveFiller	myPaveFiller
	Pave Filler - algorithm for sub-shapes intersection. More...

BOPDS_PDS	myDS
	Data Structure - holder of intersection information. More...

Handle< IntTools_Context >	myContext
	Context - tool for cashing heavy algorithms such as Projectors and Classifiers. More...

Standard_Integer	myEntryPoint
	EntryPoint - controls the deletion of the PaveFiller, which could live longer than the Builder. More...

TopTools_DataMapOfShapeListOfShape	myImages
	Images - map of Images of the sub-shapes of arguments. More...

TopTools_DataMapOfShapeShape	myShapesSD
	ShapesSD - map of SD Shapes. More...

TopTools_DataMapOfShapeListOfShape	myOrigins
	Origins - map of Origins, back map of Images. More...

Standard_Boolean	myNonDestructive
	Safe processing option allows avoiding modification of the input shapes. More...

BOPAlgo_GlueEnum	myGlue
	Gluing option allows speeding up the intersection of the input shapes. More...

Standard_Boolean	myCheckInverted
	Check inverted option allows disabling the check of input solids on inverted status. More...

Protected Attributes inherited from BOPAlgo_BuilderShape
TopoDS_Shape	myShape

TopTools_ListOfShape	myHistShapes

TopTools_MapOfShape	myMapShape

Standard_Boolean	myHasDeleted

Standard_Boolean	myHasGenerated

Standard_Boolean	myHasModified

TopTools_IndexedDataMapOfShapeListOfShape	myImagesResult

Standard_Boolean	myFlagHistory

Protected Attributes inherited from BOPAlgo_Options
Handle< NCollection_BaseAllocator >	myAllocator
	Enables/Disables the usage of OBB. More...

Handle< Message_Report >	myReport
	Enables/Disables the usage of OBB. More...

Standard_Boolean	myRunParallel
	Enables/Disables the usage of OBB. More...

Standard_Real	myFuzzyValue
	Enables/Disables the usage of OBB. More...

Handle< Message_ProgressIndicator >	myProgressIndicator
	Enables/Disables the usage of OBB. More...

Standard_Boolean	myUseOBB
	Enables/Disables the usage of OBB. More...

Detailed Description

The algorithm to build a Section between the arguments. The Section consists of vertices and edges. The Section contains:

new vertices that are subjects of V/V, E/E, E/F, F/F interferences
vertices that are subjects of V/E, V/F interferences
new edges that are subjects of F/F interferences
edges that are Common Blocks

Constructor & Destructor Documentation

◆ BOPAlgo_Section() [1/2]

BOPAlgo_Section::BOPAlgo_Section ( )

Empty constructor.

◆ ~BOPAlgo_Section()

virtual BOPAlgo_Section::~BOPAlgo_Section ( )

virtual

◆ BOPAlgo_Section() [2/2]

BOPAlgo_Section::BOPAlgo_Section ( const Handle< NCollection_BaseAllocator > & theAllocator )

Constructor with allocator.

Member Function Documentation

◆ BuildSection()

virtual void BOPAlgo_Section::BuildSection ( )

protectedvirtual

Combine the result of section operation.

◆ CheckData()

virtual void BOPAlgo_Section::CheckData ( )

overrideprotectedvirtual

Checks the data before performing the operation.

Reimplemented from BOPAlgo_Builder.

◆ PerformInternal1()

virtual void BOPAlgo_Section::PerformInternal1 ( const BOPAlgo_PaveFiller & thePF )

overrideprotectedvirtual

Performs calculations using prepared Filler object <thePF>