An EditForm is the way to apply an Editor on an Entity or on the Model It gives read-only or read-write access, with or without undo. More...

#include <IFSelect_EditForm.hxx>

Inheritance diagram for IFSelect_EditForm:

[legend]

Public Member Functions
	IFSelect_EditForm (const Handle< IFSelect_Editor > &editor, const Standard_Boolean readonly, const Standard_Boolean undoable, const Standard_CString label="")
	Creates a complete EditForm from an Editor A specific Label can be given. More...

	IFSelect_EditForm (const Handle< IFSelect_Editor > &editor, const TColStd_SequenceOfInteger &nums, const Standard_Boolean readonly, const Standard_Boolean undoable, const Standard_CString label="")
	Creates an extracted EditForm from an Editor, limited to the values identified in <nums> A specific Label can be given. More...

Standard_Boolean &	EditKeepStatus ()
	Returns and may change the keep status on modif It starts as False If it is True, Apply does not clear modification status and the EditForm can be loaded again, modified value remain and may be applied again Remark that ApplyData does not clear the modification status, a call to ClearEdit does. More...

Standard_CString	Label () const

Standard_Boolean	IsLoaded () const
	Tells if the EditForm is loaded now. More...

void	ClearData ()

void	SetData (const Handle< Standard_Transient > &ent, const Handle< Interface_InterfaceModel > &model)

void	SetEntity (const Handle< Standard_Transient > &ent)

void	SetModel (const Handle< Interface_InterfaceModel > &model)

Handle< Standard_Transient >	Entity () const

Handle< Interface_InterfaceModel >	Model () const

Handle< IFSelect_Editor >	Editor () const

Standard_Boolean	IsComplete () const
	Tells if an EditForm is complete or is an extract from Editor. More...

Standard_Integer	NbValues (const Standard_Boolean editable) const
	Returns the count of values <editable> True : count of editable values, i.e. For a complete EditForm, it is given by the Editor Else, it is the length of the extraction map <editable> False : all the values from the Editor. More...

Standard_Integer	NumberFromRank (const Standard_Integer rank) const
	Returns the Value Number in the Editor from a given Rank in the EditForm For a complete EditForm, both are equal Else, it is given by the extraction map Returns 0 if <rank> exceeds the count of editable values,. More...

Standard_Integer	RankFromNumber (const Standard_Integer number) const
	Returns the Rank in the EditForm from a given Number of Value for the Editor For a complete EditForm, both are equal Else, it is given by the extraction map Returns 0 if <number> is not forecast to be edited, or is out of range. More...

Standard_Integer	NameNumber (const Standard_CString name) const
	Returns the Value Number in the Editor for a given Name i.e. the true ValueNumber which can be used in various methods of EditForm If it is not complete, for a recorded (in the Editor) but non-loaded name, returns negative value (- number) More...

Standard_Integer	NameRank (const Standard_CString name) const
	Returns the Rank of Value in the EditForm for a given Name i.e. if it is not complete, for a recorded (in the Editor) but non-loaded name, returns 0. More...

void	LoadDefault ()
	For a read-write undoable EditForm, loads original values from defaults stored in the Editor. More...

virtual Standard_Boolean	LoadData (const Handle< Standard_Transient > &ent, const Handle< Interface_InterfaceModel > &model)
	Loads modifications to data Default uses Editor. Can be redefined Remark that <ent> and/or <model> may be null, according to the kind of Editor. Shortcuts are available for these cases, but they finally call LoadData (hence, just ignore non-used args) More...

Standard_Boolean	LoadEntity (const Handle< Standard_Transient > &ent)
	Shortcut for LoadData when <model> is not used. More...

Standard_Boolean	LoadModel (const Handle< Interface_InterfaceModel > &model)
	Shortcut for LoadData when only the model is concerned. More...

Standard_Boolean	LoadData ()
	Shortcut when both <ent> and <model> are not used (when the Editor works on fully static or global data) More...

Handle< IFSelect_ListEditor >	ListEditor (const Standard_Integer num) const
	Returns a ListEditor to edit the parameter <num> of the EditForm, if it is a List The Editor created it (by ListEditor) then loads it (by ListValue) For a single parameter, returns a Null Handle ... More...

void	LoadValue (const Standard_Integer num, const Handle< TCollection_HAsciiString > &val)
	Loads an original value (single). Called by the Editor only. More...

void	LoadList (const Standard_Integer num, const Handle< TColStd_HSequenceOfHAsciiString > &list)
	Loads an original value as a list. Called by the Editor only. More...

Handle< TCollection_HAsciiString >	OriginalValue (const Standard_Integer num) const
	From an edited value, returns its ... value (original one) Null means that this value is not defined <num> is for the EditForm, not the Editor It is for a single parameter. For a list, gives a Null Handle. More...

Handle< TColStd_HSequenceOfHAsciiString >	OriginalList (const Standard_Integer num) const
	Returns an original value, as a list <num> is for the EditForm, not the Editor For a single parameter, gives a Null Handle. More...

Handle< TCollection_HAsciiString >	EditedValue (const Standard_Integer num) const
	Returns the Edited (i.e. Modified) Value (string for single) <num> reports to the EditForm If IsModified is False, returns OriginalValue Null with IsModified True : means that this value is not defined or has been removed It is for a single parameter. For a list, gives a Null Handle. More...

Handle< TColStd_HSequenceOfHAsciiString >	EditedList (const Standard_Integer num) const
	Returns the Edited Value as a list If IsModified is False, returns OriginalValue Null with IsModified True : means that this value is not defined or has been removed For a single parameter, gives a Null Handle. More...

Standard_Boolean	IsModified (const Standard_Integer num) const
	Tells if a Value (of the EditForm) is modified (directly or through touching by Update) More...

Standard_Boolean	IsTouched (const Standard_Integer num) const
	Tells if a Value (of the EditForm) has been touched, i.e. not modified directly but by the modification of another one (by method Update from the Editor) More...

Standard_Boolean	Modify (const Standard_Integer num, const Handle< TCollection_HAsciiString > &newval, const Standard_Boolean enforce=Standard_False)
	Gives a new value for the item <num> of the EditForm, if it is a single parameter (for a list, just returns False) Null means to Remove it <enforce> True to overpass Protected or Computed Access Mode Calls the method Update from the Editor, which can touch other parameters (see NbTouched) Returns True if well recorded, False if this value is not allowed Warning : Does not apply immediately : will be applied by the method Apply. More...

Standard_Boolean	ModifyList (const Standard_Integer num, const Handle< IFSelect_ListEditor > &edited, const Standard_Boolean enforce=Standard_False)
	Changes the value of an item of the EditForm, if it is a List (else, just returns False) The ListEditor contains the edited values of the list If no edition was recorded, just returns False Calls the method Update from the Editor, which can touch other parameters (see NbTouched) Returns True if well recorded, False if this value is not allowed Warning : Does not apply immediately : will be applied by the method Apply. More...

Standard_Boolean	ModifyListValue (const Standard_Integer num, const Handle< TColStd_HSequenceOfHAsciiString > &list, const Standard_Boolean enforce=Standard_False)
	As ModifyList but the new value is given as such Creates a ListEditor, Loads it, then calls ModifyList. More...

Standard_Boolean	Touch (const Standard_Integer num, const Handle< TCollection_HAsciiString > &newval)
	Gives a new value computed by the Editor, if another parameter commands the value of <num> It is generally the case for a Computed Parameter for instance Increments the counter of touched parameters Warning : it gives no protection for ReadOnly etc... while it is the internal way of touching parameters Does not work (returns False) if <num> is for a list. More...

Standard_Boolean	TouchList (const Standard_Integer num, const Handle< TColStd_HSequenceOfHAsciiString > &newlist)
	Acts as Touch but for a list Does not work (returns False) if <num> is for a single param. More...

Standard_Integer	NbTouched () const
	Returns the count of parameters touched by the last Modify (apart from the modified parameter itself) Normally it is zero. More...

void	ClearEdit (const Standard_Integer num=0)
	Clears modification status : by default all, or one by its numbers (in the Editor) More...

void	PrintDefs (const Handle< Message_Messenger > &S) const
	Prints Definitions, relative to the Editor. More...

void	PrintValues (const Handle< Message_Messenger > &S, const Standard_Integer what, const Standard_Boolean names, const Standard_Boolean alsolist=Standard_False) const
	Prints Values, according to what and alsolist <names> True : prints Long Names; False : prints Short Names <what> < 0 : prints Original Values (+ flag Modified) <what> > 0 : prints Final Values (+flag Modified) <what> = 0 : prints Modified Values (Original + Edited) <alsolist> False (D) : lists are printed only as their count <alsolist> True : lists are printed for all their items. More...

Standard_Boolean	Apply ()
	Applies modifications to own data Calls ApplyData then Clears Status according EditKeepStatus. More...

virtual Standard_Boolean	Recognize () const
	Tells if this EditForm can work with its Editor and its actual Data (Entity and Model) Default uses Editor. Can be redefined. More...

virtual Standard_Boolean	ApplyData (const Handle< Standard_Transient > &ent, const Handle< Interface_InterfaceModel > &model)
	Applies modifications to data Default uses Editor. Can be redefined. More...

Standard_Boolean	Undo ()
	For an undoable EditForm, Applies ... origibal values ! and clears modified ones Can be run only once. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Detailed Description

An EditForm is the way to apply an Editor on an Entity or on the Model It gives read-only or read-write access, with or without undo.

It can be complete (all the values of the Editor are present) or partial (a sub-list of these value are present) Anyway, all references to Number (argument <num>) refer to Number of Value for the Editor While references to Rank are for rank in the EditForm, which may differ if it is not Complete Two methods give the correspondance between this Number and the Rank in the EditForm : RankFromNumber and NumberFromRank

Constructor & Destructor Documentation

◆ IFSelect_EditForm() [1/2]

IFSelect_EditForm::IFSelect_EditForm	(	const Handle< IFSelect_Editor > &	editor,
		const Standard_Boolean	readonly,
		const Standard_Boolean	undoable,
		const Standard_CString	label = `""`
	)

Creates a complete EditForm from an Editor A specific Label can be given.

◆ IFSelect_EditForm() [2/2]

IFSelect_EditForm::IFSelect_EditForm	(	const Handle< IFSelect_Editor > &	editor,
		const TColStd_SequenceOfInteger &	nums,
		const Standard_Boolean	readonly,
		const Standard_Boolean	undoable,
		const Standard_CString	label = `""`
	)

Creates an extracted EditForm from an Editor, limited to the values identified in <nums> A specific Label can be given.

Member Function Documentation

◆ Apply()

Standard_Boolean IFSelect_EditForm::Apply ( )

Applies modifications to own data Calls ApplyData then Clears Status according EditKeepStatus.

◆ ApplyData()

virtual Standard_Boolean IFSelect_EditForm::ApplyData	(	const Handle< Standard_Transient > &	ent,
		const Handle< Interface_InterfaceModel > &	model
	)

virtual

Applies modifications to data Default uses Editor. Can be redefined.

◆ ClearData()

void IFSelect_EditForm::ClearData ( )

◆ ClearEdit()

void IFSelect_EditForm::ClearEdit ( const Standard_Integer num = 0 )

Clears modification status : by default all, or one by its numbers (in the Editor)

◆ EditedList()

Handle< TColStd_HSequenceOfHAsciiString > IFSelect_EditForm::EditedList ( const Standard_Integer num ) const

Returns the Edited Value as a list If IsModified is False, returns OriginalValue Null with IsModified True : means that this value is not defined or has been removed For a single parameter, gives a Null Handle.

◆ EditedValue()

Handle< TCollection_HAsciiString > IFSelect_EditForm::EditedValue ( const Standard_Integer num ) const

Returns the Edited (i.e. Modified) Value (string for single) <num> reports to the EditForm If IsModified is False, returns OriginalValue Null with IsModified True : means that this value is not defined or has been removed It is for a single parameter. For a list, gives a Null Handle.

◆ EditKeepStatus()

Standard_Boolean& IFSelect_EditForm::EditKeepStatus ( )

Returns and may change the keep status on modif It starts as False If it is True, Apply does not clear modification status and the EditForm can be loaded again, modified value remain and may be applied again Remark that ApplyData does not clear the modification status, a call to ClearEdit does.

◆ Editor()

Handle< IFSelect_Editor > IFSelect_EditForm::Editor ( ) const

◆ Entity()

Handle< Standard_Transient > IFSelect_EditForm::Entity ( ) const

◆ IsComplete()

Standard_Boolean IFSelect_EditForm::IsComplete ( ) const

Tells if an EditForm is complete or is an extract from Editor.

◆ IsLoaded()

Standard_Boolean IFSelect_EditForm::IsLoaded ( ) const

Tells if the EditForm is loaded now.

◆ IsModified()

Standard_Boolean IFSelect_EditForm::IsModified ( const Standard_Integer num ) const

Tells if a Value (of the EditForm) is modified (directly or through touching by Update)

◆ IsTouched()

Standard_Boolean IFSelect_EditForm::IsTouched ( const Standard_Integer num ) const

Tells if a Value (of the EditForm) has been touched, i.e. not modified directly but by the modification of another one (by method Update from the Editor)

◆ Label()

Standard_CString IFSelect_EditForm::Label ( ) const

◆ ListEditor()

Handle< IFSelect_ListEditor > IFSelect_EditForm::ListEditor ( const Standard_Integer num ) const

Returns a ListEditor to edit the parameter <num> of the EditForm, if it is a List The Editor created it (by ListEditor) then loads it (by ListValue) For a single parameter, returns a Null Handle ...

◆ LoadData() [1/2]

virtual Standard_Boolean IFSelect_EditForm::LoadData	(	const Handle< Standard_Transient > &	ent,
		const Handle< Interface_InterfaceModel > &	model
	)

virtual

Loads modifications to data Default uses Editor. Can be redefined Remark that <ent> and/or <model> may be null, according to the kind of Editor. Shortcuts are available for these cases, but they finally call LoadData (hence, just ignore non-used args)

◆ LoadData() [2/2]

Standard_Boolean IFSelect_EditForm::LoadData ( )

Shortcut when both <ent> and <model> are not used (when the Editor works on fully static or global data)

◆ LoadDefault()

void IFSelect_EditForm::LoadDefault ( )

For a read-write undoable EditForm, loads original values from defaults stored in the Editor.

◆ LoadEntity()

Standard_Boolean IFSelect_EditForm::LoadEntity ( const Handle< Standard_Transient > & ent )

Shortcut for LoadData when <model> is not used.

◆ LoadList()

void IFSelect_EditForm::LoadList	(	const Standard_Integer	num,
		const Handle< TColStd_HSequenceOfHAsciiString > &	list
	)

Loads an original value as a list. Called by the Editor only.

◆ LoadModel()

Standard_Boolean IFSelect_EditForm::LoadModel ( const Handle< Interface_InterfaceModel > & model )

Shortcut for LoadData when only the model is concerned.

◆ LoadValue()

void IFSelect_EditForm::LoadValue	(	const Standard_Integer	num,
		const Handle< TCollection_HAsciiString > &	val
	)

Loads an original value (single). Called by the Editor only.

◆ Model()

Handle< Interface_InterfaceModel > IFSelect_EditForm::Model ( ) const

◆ Modify()

Standard_Boolean IFSelect_EditForm::Modify	(	const Standard_Integer	num,
		const Handle< TCollection_HAsciiString > &	newval,
		const Standard_Boolean	enforce = `Standard_False`
	)

Gives a new value for the item <num> of the EditForm, if it is a single parameter (for a list, just returns False) Null means to Remove it <enforce> True to overpass Protected or Computed Access Mode Calls the method Update from the Editor, which can touch other parameters (see NbTouched) Returns True if well recorded, False if this value is not allowed Warning : Does not apply immediately : will be applied by the method Apply.

◆ ModifyList()

Standard_Boolean IFSelect_EditForm::ModifyList	(	const Standard_Integer	num,
		const Handle< IFSelect_ListEditor > &	edited,
		const Standard_Boolean	enforce = `Standard_False`
	)

Changes the value of an item of the EditForm, if it is a List (else, just returns False) The ListEditor contains the edited values of the list If no edition was recorded, just returns False Calls the method Update from the Editor, which can touch other parameters (see NbTouched) Returns True if well recorded, False if this value is not allowed Warning : Does not apply immediately : will be applied by the method Apply.

◆ ModifyListValue()

Standard_Boolean IFSelect_EditForm::ModifyListValue	(	const Standard_Integer	num,
		const Handle< TColStd_HSequenceOfHAsciiString > &	list,
		const Standard_Boolean	enforce = `Standard_False`
	)

As ModifyList but the new value is given as such Creates a ListEditor, Loads it, then calls ModifyList.

◆ NameNumber()

Standard_Integer IFSelect_EditForm::NameNumber ( const Standard_CString name ) const

Returns the Value Number in the Editor for a given Name i.e. the true ValueNumber which can be used in various methods of EditForm If it is not complete, for a recorded (in the Editor) but non-loaded name, returns negative value (- number)

◆ NameRank()

Standard_Integer IFSelect_EditForm::NameRank ( const Standard_CString name ) const

Returns the Rank of Value in the EditForm for a given Name i.e. if it is not complete, for a recorded (in the Editor) but non-loaded name, returns 0.

◆ NbTouched()

Standard_Integer IFSelect_EditForm::NbTouched ( ) const

Returns the count of parameters touched by the last Modify (apart from the modified parameter itself) Normally it is zero.

◆ NbValues()

Standard_Integer IFSelect_EditForm::NbValues ( const Standard_Boolean editable ) const

Returns the count of values <editable> True : count of editable values, i.e. For a complete EditForm, it is given by the Editor Else, it is the length of the extraction map <editable> False : all the values from the Editor.

◆ NumberFromRank()

Standard_Integer IFSelect_EditForm::NumberFromRank ( const Standard_Integer rank ) const

Returns the Value Number in the Editor from a given Rank in the EditForm For a complete EditForm, both are equal Else, it is given by the extraction map Returns 0 if <rank> exceeds the count of editable values,.

◆ OriginalList()

Handle< TColStd_HSequenceOfHAsciiString > IFSelect_EditForm::OriginalList ( const Standard_Integer num ) const

Returns an original value, as a list <num> is for the EditForm, not the Editor For a single parameter, gives a Null Handle.

◆ OriginalValue()

Handle< TCollection_HAsciiString > IFSelect_EditForm::OriginalValue ( const Standard_Integer num ) const

From an edited value, returns its ... value (original one) Null means that this value is not defined <num> is for the EditForm, not the Editor It is for a single parameter. For a list, gives a Null Handle.

◆ PrintDefs()

void IFSelect_EditForm::PrintDefs ( const Handle< Message_Messenger > & S ) const

Prints Definitions, relative to the Editor.

◆ PrintValues()

void IFSelect_EditForm::PrintValues	(	const Handle< Message_Messenger > &	S,
		const Standard_Integer	what,
		const Standard_Boolean	names,
		const Standard_Boolean	alsolist = `Standard_False`
	)		const

Prints Values, according to what and alsolist <names> True : prints Long Names; False : prints Short Names <what> < 0 : prints Original Values (+ flag Modified) <what> > 0 : prints Final Values (+flag Modified) <what> = 0 : prints Modified Values (Original + Edited) <alsolist> False (D) : lists are printed only as their count <alsolist> True : lists are printed for all their items.

◆ RankFromNumber()

Standard_Integer IFSelect_EditForm::RankFromNumber ( const Standard_Integer number ) const

Returns the Rank in the EditForm from a given Number of Value for the Editor For a complete EditForm, both are equal Else, it is given by the extraction map Returns 0 if <number> is not forecast to be edited, or is out of range.

◆ Recognize()

virtual Standard_Boolean IFSelect_EditForm::Recognize ( ) const

virtual

Tells if this EditForm can work with its Editor and its actual Data (Entity and Model) Default uses Editor. Can be redefined.

◆ SetData()

void IFSelect_EditForm::SetData	(	const Handle< Standard_Transient > &	ent,
		const Handle< Interface_InterfaceModel > &	model
	)

◆ SetEntity()

void IFSelect_EditForm::SetEntity ( const Handle< Standard_Transient > & ent )

◆ SetModel()

void IFSelect_EditForm::SetModel ( const Handle< Interface_InterfaceModel > & model )

◆ Touch()

Standard_Boolean IFSelect_EditForm::Touch	(	const Standard_Integer	num,
		const Handle< TCollection_HAsciiString > &	newval
	)

Gives a new value computed by the Editor, if another parameter commands the value of <num> It is generally the case for a Computed Parameter for instance Increments the counter of touched parameters Warning : it gives no protection for ReadOnly etc... while it is the internal way of touching parameters Does not work (returns False) if <num> is for a list.

◆ TouchList()

Standard_Boolean IFSelect_EditForm::TouchList	(	const Standard_Integer	num,
		const Handle< TColStd_HSequenceOfHAsciiString > &	newlist
	)

Acts as Touch but for a list Does not work (returns False) if <num> is for a single param.

◆ Undo()

Standard_Boolean IFSelect_EditForm::Undo ( )

For an undoable EditForm, Applies ... origibal values ! and clears modified ones Can be run only once.

The documentation for this class was generated from the following file:

IFSelect_EditForm.hxx

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ IFSelect_EditForm() [1/2]

◆ IFSelect_EditForm() [2/2]

Member Function Documentation

◆ Apply()

◆ ApplyData()

◆ ClearData()

◆ ClearEdit()

◆ EditedList()

◆ EditedValue()

◆ EditKeepStatus()

◆ Editor()

◆ Entity()

◆ IsComplete()

◆ IsLoaded()

◆ IsModified()

◆ IsTouched()

◆ Label()

◆ ListEditor()

◆ LoadData() [1/2]

◆ LoadData() [2/2]

◆ LoadDefault()

◆ LoadEntity()

◆ LoadList()

◆ LoadModel()

◆ LoadValue()

◆ Model()

◆ Modify()

◆ ModifyList()

◆ ModifyListValue()

◆ NameNumber()

◆ NameRank()

◆ NbTouched()

◆ NbValues()

◆ NumberFromRank()

◆ OriginalList()

◆ OriginalValue()

◆ PrintDefs()

◆ PrintValues()

◆ RankFromNumber()

◆ Recognize()

◆ SetData()

◆ SetEntity()

◆ SetModel()

◆ Touch()

◆ TouchList()

◆ Undo()