Open CASCADE Technology  7.3.0
Public Member Functions
TopOpeBRepDS_BuildTool Class Reference

Provides a Tool to build topologies. Used to instantiate the Builder algorithm. More...

#include <TopOpeBRepDS_BuildTool.hxx>

Public Member Functions

 TopOpeBRepDS_BuildTool ()
 
 TopOpeBRepDS_BuildTool (const TopOpeBRepTool_OutCurveType OutCurveType)
 
 TopOpeBRepDS_BuildTool (const TopOpeBRepTool_GeomTool &GT)
 
const TopOpeBRepTool_GeomToolGetGeomTool () const
 
TopOpeBRepTool_GeomToolChangeGeomTool ()
 
void MakeVertex (TopoDS_Shape &V, const TopOpeBRepDS_Point &P) const
 
void MakeEdge (TopoDS_Shape &E, const TopOpeBRepDS_Curve &C) const
 
void MakeEdge (TopoDS_Shape &E, const TopOpeBRepDS_Curve &C, const TopOpeBRepDS_DataStructure &DS) const
 
void MakeEdge (TopoDS_Shape &E, const Handle< Geom_Curve > &C, const Standard_Real Tol) const
 
void MakeEdge (TopoDS_Shape &E) const
 
void MakeWire (TopoDS_Shape &W) const
 
void MakeFace (TopoDS_Shape &F, const TopOpeBRepDS_Surface &S) const
 
void MakeShell (TopoDS_Shape &Sh) const
 
void MakeSolid (TopoDS_Shape &S) const
 
void CopyEdge (const TopoDS_Shape &Ein, TopoDS_Shape &Eou) const
 Make an edge <Eou> with the curve of the edge <Ein> More...
 
void GetOrientedEdgeVertices (TopoDS_Edge &E, TopoDS_Vertex &Vmin, TopoDS_Vertex &Vmax, Standard_Real &Parmin, Standard_Real &Parmax) const
 
void UpdateEdgeCurveTol (const TopoDS_Face &F1, const TopoDS_Face &F2, TopoDS_Edge &E, const Handle< Geom_Curve > &C3Dnew, const Standard_Real tol3d, const Standard_Real tol2d1, const Standard_Real tol2d2, Standard_Real &newtol, Standard_Real &newparmin, Standard_Real &newparmax) const
 
void ApproxCurves (const TopOpeBRepDS_Curve &C, TopoDS_Edge &E, Standard_Integer &inewC, const Handle< TopOpeBRepDS_HDataStructure > &HDS) const
 
void ComputePCurves (const TopOpeBRepDS_Curve &C, TopoDS_Edge &E, TopOpeBRepDS_Curve &newC, const Standard_Boolean CompPC1, const Standard_Boolean CompPC2, const Standard_Boolean CompC3D) const
 
void PutPCurves (const TopOpeBRepDS_Curve &newC, TopoDS_Edge &E, const Standard_Boolean CompPC1, const Standard_Boolean CompPC2) const
 
void RecomputeCurves (const TopOpeBRepDS_Curve &C, const TopoDS_Edge &oldE, TopoDS_Edge &E, Standard_Integer &inewC, const Handle< TopOpeBRepDS_HDataStructure > &HDS) const
 
void CopyFace (const TopoDS_Shape &Fin, TopoDS_Shape &Fou) const
 Make a face <Fou> with the surface of the face <Fin> More...
 
void AddEdgeVertex (const TopoDS_Shape &Ein, TopoDS_Shape &Eou, const TopoDS_Shape &V) const
 
void AddEdgeVertex (TopoDS_Shape &E, const TopoDS_Shape &V) const
 
void AddWireEdge (TopoDS_Shape &W, const TopoDS_Shape &E) const
 
void AddFaceWire (TopoDS_Shape &F, const TopoDS_Shape &W) const
 
void AddShellFace (TopoDS_Shape &Sh, const TopoDS_Shape &F) const
 
void AddSolidShell (TopoDS_Shape &S, const TopoDS_Shape &Sh) const
 
void Parameter (const TopoDS_Shape &E, const TopoDS_Shape &V, const Standard_Real P) const
 Sets the parameter. More...
 
void Range (const TopoDS_Shape &E, const Standard_Real first, const Standard_Real last) const
 Sets the range of edge <E>. More...
 
void UpdateEdge (const TopoDS_Shape &Ein, TopoDS_Shape &Eou) const
 Sets the range of edge <Eou> from <Ein> only when <Ein> has a closed geometry. More...
 
void Parameter (const TopOpeBRepDS_Curve &C, TopoDS_Shape &E, TopoDS_Shape &V) const
 Compute the parameter of the vertex <V>, supported by the edge <E>, on the curve . More...
 
void Curve3D (TopoDS_Shape &E, const Handle< Geom_Curve > &C, const Standard_Real Tol) const
 Sets the curve for the edge <E> More...
 
void PCurve (TopoDS_Shape &F, TopoDS_Shape &E, const Handle< Geom2d_Curve > &C) const
 Sets the pcurve for the edge <E> on the face <F>. If OverWrite is True the old pcurve if there is one is overwritten, else the two pcurves are set. More...
 
void PCurve (TopoDS_Shape &F, TopoDS_Shape &E, const TopOpeBRepDS_Curve &CDS, const Handle< Geom2d_Curve > &C) const
 
void Orientation (TopoDS_Shape &S, const TopAbs_Orientation O) const
 
TopAbs_Orientation Orientation (const TopoDS_Shape &S) const
 
void Closed (TopoDS_Shape &S, const Standard_Boolean B) const
 
Standard_Boolean Approximation () const
 
void UpdateSurface (const TopoDS_Shape &F, const Handle< Geom_Surface > &SU) const
 
void UpdateSurface (const TopoDS_Shape &E, const TopoDS_Shape &oldF, const TopoDS_Shape &newF) const
 
Standard_Boolean OverWrite () const
 
void OverWrite (const Standard_Boolean O)
 
Standard_Boolean Translate () const
 
void Translate (const Standard_Boolean T)
 

Detailed Description

Provides a Tool to build topologies. Used to instantiate the Builder algorithm.

Constructor & Destructor Documentation

◆ TopOpeBRepDS_BuildTool() [1/3]

TopOpeBRepDS_BuildTool::TopOpeBRepDS_BuildTool ( )

◆ TopOpeBRepDS_BuildTool() [2/3]

TopOpeBRepDS_BuildTool::TopOpeBRepDS_BuildTool ( const TopOpeBRepTool_OutCurveType  OutCurveType)

◆ TopOpeBRepDS_BuildTool() [3/3]

TopOpeBRepDS_BuildTool::TopOpeBRepDS_BuildTool ( const TopOpeBRepTool_GeomTool GT)

Member Function Documentation

◆ AddEdgeVertex() [1/2]

void TopOpeBRepDS_BuildTool::AddEdgeVertex ( const TopoDS_Shape Ein,
TopoDS_Shape Eou,
const TopoDS_Shape V 
) const

◆ AddEdgeVertex() [2/2]

void TopOpeBRepDS_BuildTool::AddEdgeVertex ( TopoDS_Shape E,
const TopoDS_Shape V 
) const

◆ AddFaceWire()

void TopOpeBRepDS_BuildTool::AddFaceWire ( TopoDS_Shape F,
const TopoDS_Shape W 
) const

◆ AddShellFace()

void TopOpeBRepDS_BuildTool::AddShellFace ( TopoDS_Shape Sh,
const TopoDS_Shape F 
) const

◆ AddSolidShell()

void TopOpeBRepDS_BuildTool::AddSolidShell ( TopoDS_Shape S,
const TopoDS_Shape Sh 
) const

◆ AddWireEdge()

void TopOpeBRepDS_BuildTool::AddWireEdge ( TopoDS_Shape W,
const TopoDS_Shape E 
) const

◆ ApproxCurves()

void TopOpeBRepDS_BuildTool::ApproxCurves ( const TopOpeBRepDS_Curve C,
TopoDS_Edge E,
Standard_Integer inewC,
const Handle< TopOpeBRepDS_HDataStructure > &  HDS 
) const

◆ Approximation()

Standard_Boolean TopOpeBRepDS_BuildTool::Approximation ( ) const

◆ ChangeGeomTool()

TopOpeBRepTool_GeomTool& TopOpeBRepDS_BuildTool::ChangeGeomTool ( )

◆ Closed()

void TopOpeBRepDS_BuildTool::Closed ( TopoDS_Shape S,
const Standard_Boolean  B 
) const

◆ ComputePCurves()

void TopOpeBRepDS_BuildTool::ComputePCurves ( const TopOpeBRepDS_Curve C,
TopoDS_Edge E,
TopOpeBRepDS_Curve newC,
const Standard_Boolean  CompPC1,
const Standard_Boolean  CompPC2,
const Standard_Boolean  CompC3D 
) const

◆ CopyEdge()

void TopOpeBRepDS_BuildTool::CopyEdge ( const TopoDS_Shape Ein,
TopoDS_Shape Eou 
) const

Make an edge <Eou> with the curve of the edge <Ein>

◆ CopyFace()

void TopOpeBRepDS_BuildTool::CopyFace ( const TopoDS_Shape Fin,
TopoDS_Shape Fou 
) const

Make a face <Fou> with the surface of the face <Fin>

◆ Curve3D()

void TopOpeBRepDS_BuildTool::Curve3D ( TopoDS_Shape E,
const Handle< Geom_Curve > &  C,
const Standard_Real  Tol 
) const

Sets the curve for the edge <E>

◆ GetGeomTool()

const TopOpeBRepTool_GeomTool& TopOpeBRepDS_BuildTool::GetGeomTool ( ) const

◆ GetOrientedEdgeVertices()

void TopOpeBRepDS_BuildTool::GetOrientedEdgeVertices ( TopoDS_Edge E,
TopoDS_Vertex Vmin,
TopoDS_Vertex Vmax,
Standard_Real Parmin,
Standard_Real Parmax 
) const

◆ MakeEdge() [1/4]

void TopOpeBRepDS_BuildTool::MakeEdge ( TopoDS_Shape E,
const TopOpeBRepDS_Curve C 
) const

◆ MakeEdge() [2/4]

void TopOpeBRepDS_BuildTool::MakeEdge ( TopoDS_Shape E,
const TopOpeBRepDS_Curve C,
const TopOpeBRepDS_DataStructure DS 
) const

◆ MakeEdge() [3/4]

void TopOpeBRepDS_BuildTool::MakeEdge ( TopoDS_Shape E,
const Handle< Geom_Curve > &  C,
const Standard_Real  Tol 
) const

◆ MakeEdge() [4/4]

void TopOpeBRepDS_BuildTool::MakeEdge ( TopoDS_Shape E) const

◆ MakeFace()

void TopOpeBRepDS_BuildTool::MakeFace ( TopoDS_Shape F,
const TopOpeBRepDS_Surface S 
) const

◆ MakeShell()

void TopOpeBRepDS_BuildTool::MakeShell ( TopoDS_Shape Sh) const

◆ MakeSolid()

void TopOpeBRepDS_BuildTool::MakeSolid ( TopoDS_Shape S) const

◆ MakeVertex()

void TopOpeBRepDS_BuildTool::MakeVertex ( TopoDS_Shape V,
const TopOpeBRepDS_Point P 
) const

◆ MakeWire()

void TopOpeBRepDS_BuildTool::MakeWire ( TopoDS_Shape W) const

◆ Orientation() [1/2]

void TopOpeBRepDS_BuildTool::Orientation ( TopoDS_Shape S,
const TopAbs_Orientation  O 
) const

◆ Orientation() [2/2]

TopAbs_Orientation TopOpeBRepDS_BuildTool::Orientation ( const TopoDS_Shape S) const

◆ OverWrite() [1/2]

Standard_Boolean TopOpeBRepDS_BuildTool::OverWrite ( ) const

◆ OverWrite() [2/2]

void TopOpeBRepDS_BuildTool::OverWrite ( const Standard_Boolean  O)

◆ Parameter() [1/2]

void TopOpeBRepDS_BuildTool::Parameter ( const TopoDS_Shape E,
const TopoDS_Shape V,
const Standard_Real  P 
) const

Sets the parameter.

for the vertex <V> on the edge <E>.

◆ Parameter() [2/2]

void TopOpeBRepDS_BuildTool::Parameter ( const TopOpeBRepDS_Curve C,
TopoDS_Shape E,
TopoDS_Shape V 
) const

Compute the parameter of the vertex <V>, supported by the edge <E>, on the curve .

◆ PCurve() [1/2]

void TopOpeBRepDS_BuildTool::PCurve ( TopoDS_Shape F,
TopoDS_Shape E,
const Handle< Geom2d_Curve > &  C 
) const

Sets the pcurve for the edge <E> on the face <F>. If OverWrite is True the old pcurve if there is one is overwritten, else the two pcurves are set.

◆ PCurve() [2/2]

void TopOpeBRepDS_BuildTool::PCurve ( TopoDS_Shape F,
TopoDS_Shape E,
const TopOpeBRepDS_Curve CDS,
const Handle< Geom2d_Curve > &  C 
) const

◆ PutPCurves()

void TopOpeBRepDS_BuildTool::PutPCurves ( const TopOpeBRepDS_Curve newC,
TopoDS_Edge E,
const Standard_Boolean  CompPC1,
const Standard_Boolean  CompPC2 
) const

◆ Range()

void TopOpeBRepDS_BuildTool::Range ( const TopoDS_Shape E,
const Standard_Real  first,
const Standard_Real  last 
) const

Sets the range of edge <E>.

◆ RecomputeCurves()

void TopOpeBRepDS_BuildTool::RecomputeCurves ( const TopOpeBRepDS_Curve C,
const TopoDS_Edge oldE,
TopoDS_Edge E,
Standard_Integer inewC,
const Handle< TopOpeBRepDS_HDataStructure > &  HDS 
) const

◆ Translate() [1/2]

Standard_Boolean TopOpeBRepDS_BuildTool::Translate ( ) const

◆ Translate() [2/2]

void TopOpeBRepDS_BuildTool::Translate ( const Standard_Boolean  T)

◆ UpdateEdge()

void TopOpeBRepDS_BuildTool::UpdateEdge ( const TopoDS_Shape Ein,
TopoDS_Shape Eou 
) const

Sets the range of edge <Eou> from <Ein> only when <Ein> has a closed geometry.

◆ UpdateEdgeCurveTol()

void TopOpeBRepDS_BuildTool::UpdateEdgeCurveTol ( const TopoDS_Face F1,
const TopoDS_Face F2,
TopoDS_Edge E,
const Handle< Geom_Curve > &  C3Dnew,
const Standard_Real  tol3d,
const Standard_Real  tol2d1,
const Standard_Real  tol2d2,
Standard_Real newtol,
Standard_Real newparmin,
Standard_Real newparmax 
) const

◆ UpdateSurface() [1/2]

void TopOpeBRepDS_BuildTool::UpdateSurface ( const TopoDS_Shape F,
const Handle< Geom_Surface > &  SU 
) const

◆ UpdateSurface() [2/2]

void TopOpeBRepDS_BuildTool::UpdateSurface ( const TopoDS_Shape E,
const TopoDS_Shape oldF,
const TopoDS_Shape newF 
) const

The documentation for this class was generated from the following file: