Contains a Shape and all its subshapes, locations and geometries. More...

#include <BRepTools_ShapeSet.hxx>

Inheritance diagram for BRepTools_ShapeSet:

Public Member Functions
	BRepTools_ShapeSet (const Standard_Boolean isWithTriangles=Standard_True)
	Builds an empty ShapeSet. Parameter <isWithTriangles> is added for XML Persistence. More...

	BRepTools_ShapeSet (const BRep_Builder &B, const Standard_Boolean isWithTriangles=Standard_True)
	Builds an empty ShapeSet. Parameter <isWithTriangles> is added for XML Persistence. More...

virtual void	Clear () override
	Clears the content of the set. More...

virtual void	AddGeometry (const TopoDS_Shape &S) override
	Stores the goemetry of <S>. More...

virtual void	DumpGeometry (Standard_OStream &OS) const override
	Dumps the geometry of me on the stream <OS>. More...

virtual void	WriteGeometry (Standard_OStream &OS) override
	Writes the geometry of me on the stream <OS> in a format that can be read back by Read. More...

virtual void	ReadGeometry (Standard_IStream &IS) override
	Reads the geometry of me from the stream <IS>. More...

virtual void	DumpGeometry (const TopoDS_Shape &S, Standard_OStream &OS) const override
	Dumps the geometry of <S> on the stream <OS>. More...

virtual void	WriteGeometry (const TopoDS_Shape &S, Standard_OStream &OS) const override
	Writes the geometry of <S> on the stream <OS> in a format that can be read back by Read. More...

virtual void	ReadGeometry (const TopAbs_ShapeEnum T, Standard_IStream &IS, TopoDS_Shape &S) override
	Reads the geometry of a shape of type <T> from the stream <IS> and returns it in <S>. More...

virtual void	AddShapes (TopoDS_Shape &S1, const TopoDS_Shape &S2) override
	Inserts the shape <S2> in the shape <S1>. This method must be redefined to use the correct builder. More...

virtual void	Check (const TopAbs_ShapeEnum T, TopoDS_Shape &S) override
	This method is called after each new completed shape. <T> is the type. <S> is the shape. In this class it does nothing, but it gives the opportunity in derived classes to perform extra treatment on shapes. More...

void	ReadPolygon3D (Standard_IStream &IS)
	Reads the 3d polygons of me from the stream <IS>. More...

void	WritePolygon3D (Standard_OStream &OS, const Standard_Boolean Compact=Standard_True) const
	Writes the 3d polygons on the stream <OS> in a format that can be read back by Read. More...

void	DumpPolygon3D (Standard_OStream &OS) const
	Dumps the 3d polygons on the stream <OS>. More...

void	ReadTriangulation (Standard_IStream &IS)
	Reads the triangulation of me from the stream <IS>. More...

void	WriteTriangulation (Standard_OStream &OS, const Standard_Boolean Compact=Standard_True) const
	Writes the triangulation on the stream <OS> in a format that can be read back by Read. More...

void	DumpTriangulation (Standard_OStream &OS) const
	Dumps the triangulation on the stream <OS>. More...

void	ReadPolygonOnTriangulation (Standard_IStream &IS)
	Reads the polygons on triangulation of me from the stream <IS>. More...

void	WritePolygonOnTriangulation (Standard_OStream &OS, const Standard_Boolean Compact=Standard_True) const
	Writes the polygons on triangulation on the stream <OS> in a format that can be read back by Read. More...

void	DumpPolygonOnTriangulation (Standard_OStream &OS) const
	Dumps the polygons on triangulation on the stream <OS>. More...

Public Member Functions inherited from TopTools_ShapeSet
	TopTools_ShapeSet ()
	Builds an empty ShapeSet. More...

virtual	~TopTools_ShapeSet ()

void	SetFormatNb (const Standard_Integer theFormatNb)

Standard_Integer	FormatNb () const
	two formats available for the moment: First: does not write CurveOnSurface UV Points into the file on reading calls Check() method. Second: stores CurveOnSurface UV Points. On reading format is recognized from Version string. More...

Standard_Integer	Add (const TopoDS_Shape &S)
	Stores <S> and its sub-shape. Returns the index of <S>. The method AddGeometry is called on each sub-shape. More...

const TopoDS_Shape &	Shape (const Standard_Integer I) const
	Returns the sub-shape of index . More...

Standard_Integer	Index (const TopoDS_Shape &S) const
	Returns the index of <S>. More...

const TopTools_LocationSet &	Locations () const

TopTools_LocationSet &	ChangeLocations ()

Standard_OStream &	DumpExtent (Standard_OStream &OS) const
	Dumps the number of objects in me on the stream <OS>. (Number of shapes of each type) More...

void	DumpExtent (TCollection_AsciiString &S) const
	Dumps the number of objects in me in the string S (Number of shapes of each type) More...

virtual void	Dump (Standard_OStream &OS) const
	Dumps the content of me on the stream <OS>. More...

virtual void	Write (Standard_OStream &OS)
	Writes the content of me on the stream <OS> in a format that can be read back by Read. More...

virtual void	Read (Standard_IStream &IS)
	Reads the content of me from the stream <IS>. me is first cleared. More...

void	Dump (const TopoDS_Shape &S, Standard_OStream &OS) const
	Dumps on <OS> the shape <S>. Dumps the orientation, the index of the TShape and the index of the Location. More...

void	Write (const TopoDS_Shape &S, Standard_OStream &OS) const
	Writes on <OS> the shape <S>. Writes the orientation, the index of the TShape and the index of the Location. More...

void	Read (TopoDS_Shape &S, Standard_IStream &IS) const
	Reads from <IS> a shape and returns it in S. More...

Standard_Integer	NbShapes () const
	Returns number of shapes read from file. More...

void	SetProgress (const Handle< Message_ProgressIndicator > &PR)

Handle< Message_ProgressIndicator >	GetProgress () const

Detailed Description

Contains a Shape and all its subshapes, locations and geometries.

The topology is inherited from TopTools.

Constructor & Destructor Documentation

◆ BRepTools_ShapeSet() [1/2]

BRepTools_ShapeSet::BRepTools_ShapeSet ( const Standard_Boolean isWithTriangles = Standard_True )

Builds an empty ShapeSet. Parameter <isWithTriangles> is added for XML Persistence.

◆ BRepTools_ShapeSet() [2/2]

BRepTools_ShapeSet::BRepTools_ShapeSet	(	const BRep_Builder &	B,
		const Standard_Boolean	isWithTriangles = `Standard_True`
	)

Builds an empty ShapeSet. Parameter <isWithTriangles> is added for XML Persistence.

Member Function Documentation

◆ AddGeometry()

virtual void BRepTools_ShapeSet::AddGeometry ( const TopoDS_Shape & S )

overridevirtual

Stores the goemetry of <S>.

Reimplemented from TopTools_ShapeSet.

◆ AddShapes()

virtual void BRepTools_ShapeSet::AddShapes	(	TopoDS_Shape &	S1,
		const TopoDS_Shape &	S2
	)

overridevirtual

Inserts the shape <S2> in the shape <S1>. This method must be redefined to use the correct builder.

Reimplemented from TopTools_ShapeSet.

◆ Check()

virtual void BRepTools_ShapeSet::Check	(	const TopAbs_ShapeEnum	T,
		TopoDS_Shape &	S
	)

overridevirtual

This method is called after each new completed shape. <T> is the type. <S> is the shape. In this class it does nothing, but it gives the opportunity in derived classes to perform extra treatment on shapes.

Reimplemented from TopTools_ShapeSet.

◆ Clear()

virtual void BRepTools_ShapeSet::Clear ( )

overridevirtual

Clears the content of the set.

Reimplemented from TopTools_ShapeSet.

◆ DumpGeometry() [1/2]

virtual void BRepTools_ShapeSet::DumpGeometry ( Standard_OStream & OS ) const

overridevirtual

Dumps the geometry of me on the stream <OS>.

Reimplemented from TopTools_ShapeSet.

◆ DumpGeometry() [2/2]

virtual void BRepTools_ShapeSet::DumpGeometry	(	const TopoDS_Shape &	S,
		Standard_OStream &	OS
	)		const

overridevirtual

Dumps the geometry of <S> on the stream <OS>.

Reimplemented from TopTools_ShapeSet.

◆ DumpPolygon3D()

void BRepTools_ShapeSet::DumpPolygon3D ( Standard_OStream & OS ) const

Dumps the 3d polygons on the stream <OS>.

◆ DumpPolygonOnTriangulation()

void BRepTools_ShapeSet::DumpPolygonOnTriangulation ( Standard_OStream & OS ) const

Dumps the polygons on triangulation on the stream <OS>.

◆ DumpTriangulation()

void BRepTools_ShapeSet::DumpTriangulation ( Standard_OStream & OS ) const

Dumps the triangulation on the stream <OS>.

◆ ReadGeometry() [1/2]

virtual void BRepTools_ShapeSet::ReadGeometry ( Standard_IStream & IS )

overridevirtual

Reads the geometry of me from the stream <IS>.

Reimplemented from TopTools_ShapeSet.

◆ ReadGeometry() [2/2]

virtual void BRepTools_ShapeSet::ReadGeometry	(	const TopAbs_ShapeEnum	T,
		Standard_IStream &	IS,
		TopoDS_Shape &	S
	)

overridevirtual

Reads the geometry of a shape of type <T> from the stream <IS> and returns it in <S>.

Reimplemented from TopTools_ShapeSet.

◆ ReadPolygon3D()

void BRepTools_ShapeSet::ReadPolygon3D ( Standard_IStream & IS )

Reads the 3d polygons of me from the stream <IS>.

◆ ReadPolygonOnTriangulation()

void BRepTools_ShapeSet::ReadPolygonOnTriangulation ( Standard_IStream & IS )

Reads the polygons on triangulation of me from the stream <IS>.

◆ ReadTriangulation()

void BRepTools_ShapeSet::ReadTriangulation ( Standard_IStream & IS )

Reads the triangulation of me from the stream <IS>.

◆ WriteGeometry() [1/2]

virtual void BRepTools_ShapeSet::WriteGeometry ( Standard_OStream & OS )

overridevirtual

Writes the geometry of me on the stream <OS> in a format that can be read back by Read.

Reimplemented from TopTools_ShapeSet.

◆ WriteGeometry() [2/2]

virtual void BRepTools_ShapeSet::WriteGeometry	(	const TopoDS_Shape &	S,
		Standard_OStream &	OS
	)		const

overridevirtual

Writes the geometry of <S> on the stream <OS> in a format that can be read back by Read.

Reimplemented from TopTools_ShapeSet.

◆ WritePolygon3D()

void BRepTools_ShapeSet::WritePolygon3D	(	Standard_OStream &	OS,
		const Standard_Boolean	Compact = `Standard_True`
	)		const

Writes the 3d polygons on the stream <OS> in a format that can be read back by Read.

◆ WritePolygonOnTriangulation()

void BRepTools_ShapeSet::WritePolygonOnTriangulation	(	Standard_OStream &	OS,
		const Standard_Boolean	Compact = `Standard_True`
	)		const

Writes the polygons on triangulation on the stream <OS> in a format that can be read back by Read.

◆ WriteTriangulation()

void BRepTools_ShapeSet::WriteTriangulation	(	Standard_OStream &	OS,
		const Standard_Boolean	Compact = `Standard_True`
	)		const

Writes the triangulation on the stream <OS> in a format that can be read back by Read.

The documentation for this class was generated from the following file:

BRepTools_ShapeSet.hxx

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ BRepTools_ShapeSet() [1/2]

◆ BRepTools_ShapeSet() [2/2]

Member Function Documentation

◆ AddGeometry()

◆ AddShapes()

◆ Check()

◆ Clear()

◆ DumpGeometry() [1/2]

◆ DumpGeometry() [2/2]

◆ DumpPolygon3D()

◆ DumpPolygonOnTriangulation()

◆ DumpTriangulation()

◆ ReadGeometry() [1/2]

◆ ReadGeometry() [2/2]

◆ ReadPolygon3D()

◆ ReadPolygonOnTriangulation()

◆ ReadTriangulation()

◆ WriteGeometry() [1/2]

◆ WriteGeometry() [2/2]

◆ WritePolygon3D()

◆ WritePolygonOnTriangulation()

◆ WriteTriangulation()