GccAna_Circ2d2TanRad Class Reference

This class implements the algorithms used to create 2d circles tangent to 2 points/lines/circles and with a given radius. For each construction methods arguments are: More...

#include <GccAna_Circ2d2TanRad.hxx>

Public Member Functions
	GccAna_Circ2d2TanRad (const GccEnt_QualifiedCirc &Qualified1, const GccEnt_QualifiedCirc &Qualified2, const Standard_Real Radius, const Standard_Real Tolerance)
	This method implements the algorithms used to create 2d circles TANgent to two 2d circle with a radius of Radius. It raises NegativeValue if Radius is lower than zero. More...
	GccAna_Circ2d2TanRad (const GccEnt_QualifiedCirc &Qualified1, const GccEnt_QualifiedLin &Qualified2, const Standard_Real Radius, const Standard_Real Tolerance)
	This method implements the algorithms used to create 2d circles TANgent to a 2d circle and a 2d line with a radius of Radius. It raises NegativeValue if Radius is lower than zero. More...
	GccAna_Circ2d2TanRad (const GccEnt_QualifiedCirc &Qualified1, const gp_Pnt2d &Point2, const Standard_Real Radius, const Standard_Real Tolerance)
	This method implements the algorithms used to create 2d circles TANgent to a 2d circle and a point with a radius of Radius. It raises NegativeValue if Radius is lower than zero. More...
	GccAna_Circ2d2TanRad (const GccEnt_QualifiedLin &Qualified1, const gp_Pnt2d &Point2, const Standard_Real Radius, const Standard_Real Tolerance)
	This method implements the algorithms used to create 2d circles TANgent to a 2d line and a point with a radius of Radius. It raises NegativeValue if Radius is lower than zero. More...
	GccAna_Circ2d2TanRad (const GccEnt_QualifiedLin &Qualified1, const GccEnt_QualifiedLin &Qualified2, const Standard_Real Radius, const Standard_Real Tolerance)
	This method implements the algorithms used to create 2d circles TANgent to two 2d lines with a radius of Radius. It raises NegativeValue if Radius is lower than zero. More...
	GccAna_Circ2d2TanRad (const gp_Pnt2d &Point1, const gp_Pnt2d &Point2, const Standard_Real Radius, const Standard_Real Tolerance)
	This method implements the algorithms used to create 2d circles passing through two points with a radius of Radius. It raises NegativeValue if Radius is lower than zero. More...
Standard_Boolean	IsDone () const
	This method returns True if the algorithm succeeded. Note: IsDone protects against a failure arising from a more internal intersection algorithm, which has reached its numeric limits. More...
Standard_Integer	NbSolutions () const
	This method returns the number of circles, representing solutions computed by this algorithm. Exceptions StdFail_NotDone if the construction fails. of solutions. More...
gp_Circ2d	ThisSolution (const Standard_Integer Index) const
	Returns the solution number Index. Be careful: the Index is only a way to get all the solutions, but is not associated to those outside the context of the algorithm-object. Raises OutOfRange exception if Index is greater than the number of solutions. It raises NotDone if the construction algorithm did not succeed. More...
void	WhichQualifier (const Standard_Integer Index, GccEnt_Position &Qualif1, GccEnt_Position &Qualif2) const
	Returns the information about the qualifiers of the tangency arguments concerning the solution number Index. It returns the real qualifiers (the qualifiers given to the constructor method in case of enclosed, enclosing and outside and the qualifiers computedin case of unqualified). More...
void	Tangency1 (const Standard_Integer Index, Standard_Real &ParSol, Standard_Real &ParArg, gp_Pnt2d &PntSol) const
	Returns information about the tangency point between the result number Index and the first argument. ParSol is the intrinsic parameter of the point PntSol on the solution. ParArg is the intrinsic parameter of the point PntSol on the first argument. Raises OutOfRange if Index is greater than the number of solutions. It raises NotDone if the construction algorithm did not succeed. More...
void	Tangency2 (const Standard_Integer Index, Standard_Real &ParSol, Standard_Real &ParArg, gp_Pnt2d &PntSol) const
	Returns information about the tangency point between the result number Index and the second argument. ParSol is the intrinsic parameter of the point PntSol on the solution. ParArg is the intrinsic parameter of the point PntArg on the second argument. Raises OutOfRange if Index is greater than the number of solutions. It raises NotDone if the construction algorithm did not succeed. More...
Standard_Boolean	IsTheSame1 (const Standard_Integer Index) const
	Returns True if the solution number Index is equal to the first argument. Raises OutOfRange if Index is greater than the number of solutions. It raises NotDone if the construction algorithm did not succeed. More...
Standard_Boolean	IsTheSame2 (const Standard_Integer Index) const
	Returns True if the solution number Index is equal to the second argument. Raises OutOfRange if Index is greater than the number of solutions. It raises NotDone if the construction algorithm did not succeed. More...

Detailed Description

This class implements the algorithms used to create 2d circles tangent to 2 points/lines/circles and with a given radius. For each construction methods arguments are:

• Two Qualified elements for tangency constraints. (for example EnclosedCirc if we want the solution inside the argument EnclosedCirc).
• Two Reals. One (Radius) for the radius and the other (Tolerance) for the tolerance. Tolerance is only used for the limit cases. For example : We want to create a circle inside a circle C1 and inside a circle C2 with a radius Radius and a tolerance Tolerance. If we do not use Tolerance it is impossible to find a solution in the following case : C2 is inside C1 and there is no intersection point between the two circles. With Tolerance it gives a solution if the lowest distance between C1 and C2 is lower than or equal Tolerance.

Constructor & Destructor Documentation

GccAna_Circ2d2TanRad() [1/6]

GccAna_Circ2d2TanRad::GccAna_Circ2d2TanRad	(	const GccEnt_QualifiedCirc &	Qualified1,
		const GccEnt_QualifiedCirc &	Qualified2,
		const Standard_Real	Radius,
		const Standard_Real	Tolerance
	)

This method implements the algorithms used to create 2d circles TANgent to two 2d circle with a radius of Radius. It raises NegativeValue if Radius is lower than zero.

GccAna_Circ2d2TanRad() [2/6]

GccAna_Circ2d2TanRad::GccAna_Circ2d2TanRad	(	const GccEnt_QualifiedCirc &	Qualified1,
		const GccEnt_QualifiedLin &	Qualified2,
		const Standard_Real	Radius,
		const Standard_Real	Tolerance
	)

This method implements the algorithms used to create 2d circles TANgent to a 2d circle and a 2d line with a radius of Radius. It raises NegativeValue if Radius is lower than zero.

GccAna_Circ2d2TanRad() [3/6]

GccAna_Circ2d2TanRad::GccAna_Circ2d2TanRad	(	const GccEnt_QualifiedCirc &	Qualified1,
		const gp_Pnt2d &	Point2,
		const Standard_Real	Radius,
		const Standard_Real	Tolerance
	)

This method implements the algorithms used to create 2d circles TANgent to a 2d circle and a point with a radius of Radius. It raises NegativeValue if Radius is lower than zero.

GccAna_Circ2d2TanRad() [4/6]

GccAna_Circ2d2TanRad::GccAna_Circ2d2TanRad	(	const GccEnt_QualifiedLin &	Qualified1,
		const gp_Pnt2d &	Point2,
		const Standard_Real	Radius,
		const Standard_Real	Tolerance
	)

This method implements the algorithms used to create 2d circles TANgent to a 2d line and a point with a radius of Radius. It raises NegativeValue if Radius is lower than zero.

GccAna_Circ2d2TanRad() [5/6]

GccAna_Circ2d2TanRad::GccAna_Circ2d2TanRad	(	const GccEnt_QualifiedLin &	Qualified1,
		const GccEnt_QualifiedLin &	Qualified2,
		const Standard_Real	Radius,
		const Standard_Real	Tolerance
	)

This method implements the algorithms used to create 2d circles TANgent to two 2d lines with a radius of Radius. It raises NegativeValue if Radius is lower than zero.

GccAna_Circ2d2TanRad() [6/6]

GccAna_Circ2d2TanRad::GccAna_Circ2d2TanRad	(	const gp_Pnt2d &	Point1,
		const gp_Pnt2d &	Point2,
		const Standard_Real	Radius,
		const Standard_Real	Tolerance
	)

This method implements the algorithms used to create 2d circles passing through two points with a radius of Radius. It raises NegativeValue if Radius is lower than zero.

Member Function Documentation

IsDone()

Standard_Boolean GccAna_Circ2d2TanRad::IsDone

(

)

const

This method returns True if the algorithm succeeded. Note: IsDone protects against a failure arising from a more internal intersection algorithm, which has reached its numeric limits.

IsTheSame1()

Standard_Boolean GccAna_Circ2d2TanRad::IsTheSame1

(

const Standard_Integer

Index

)

const

Returns True if the solution number Index is equal to the first argument. Raises OutOfRange if Index is greater than the number of solutions. It raises NotDone if the construction algorithm did not succeed.

IsTheSame2()

Standard_Boolean GccAna_Circ2d2TanRad::IsTheSame2

(

const Standard_Integer

Index

)

const

Returns True if the solution number Index is equal to the second argument. Raises OutOfRange if Index is greater than the number of solutions. It raises NotDone if the construction algorithm did not succeed.

NbSolutions()

Standard_Integer GccAna_Circ2d2TanRad::NbSolutions

(

)

const

This method returns the number of circles, representing solutions computed by this algorithm. Exceptions StdFail_NotDone if the construction fails. of solutions.

Tangency1()

void GccAna_Circ2d2TanRad::Tangency1	(	const Standard_Integer	Index,
		Standard_Real &	ParSol,
		Standard_Real &	ParArg,
		gp_Pnt2d &	PntSol
	)		const

Returns information about the tangency point between the result number Index and the first argument. ParSol is the intrinsic parameter of the point PntSol on the solution. ParArg is the intrinsic parameter of the point PntSol on the first argument. Raises OutOfRange if Index is greater than the number of solutions. It raises NotDone if the construction algorithm did not succeed.

Tangency2()

void GccAna_Circ2d2TanRad::Tangency2	(	const Standard_Integer	Index,
		Standard_Real &	ParSol,
		Standard_Real &	ParArg,
		gp_Pnt2d &	PntSol
	)		const

Returns information about the tangency point between the result number Index and the second argument. ParSol is the intrinsic parameter of the point PntSol on the solution. ParArg is the intrinsic parameter of the point PntArg on the second argument. Raises OutOfRange if Index is greater than the number of solutions. It raises NotDone if the construction algorithm did not succeed.

ThisSolution()

gp_Circ2d GccAna_Circ2d2TanRad::ThisSolution

(

const Standard_Integer

Index

)

const

Returns the solution number Index. Be careful: the Index is only a way to get all the solutions, but is not associated to those outside the context of the algorithm-object. Raises OutOfRange exception if Index is greater than the number of solutions. It raises NotDone if the construction algorithm did not succeed.

WhichQualifier()

void GccAna_Circ2d2TanRad::WhichQualifier	(	const Standard_Integer	Index,
		GccEnt_Position &	Qualif1,
		GccEnt_Position &	Qualif2
	)		const

Returns the information about the qualifiers of the tangency arguments concerning the solution number Index. It returns the real qualifiers (the qualifiers given to the constructor method in case of enclosed, enclosing and outside and the qualifiers computedin case of unqualified).

---

The documentation for this class was generated from the following file:

• GccAna_Circ2d2TanRad.hxx