Open CASCADE Technology  7.4.0
Public Member Functions
Geom2dGcc_Circ2d3TanIter Class Reference

This class implements the algorithms used to create 2d circles tangent to 3 points/lines/circles/ curves with one curve or more. The arguments of all construction methods are : More...

#include <Geom2dGcc_Circ2d3TanIter.hxx>

Public Member Functions

 Geom2dGcc_Circ2d3TanIter (const GccEnt_QualifiedCirc &Qualified1, const GccEnt_QualifiedCirc &Qualified2, const Geom2dGcc_QCurve &Qualified3, const Standard_Real Param1, const Standard_Real Param2, const Standard_Real Param3, const Standard_Real Tolerance)
 This method implements the algorithms used to create 2d circles tangent to 2 circles and a curve. More...
 
 Geom2dGcc_Circ2d3TanIter (const GccEnt_QualifiedCirc &Qualified1, const Geom2dGcc_QCurve &Qualified2, const Geom2dGcc_QCurve &Qualified3, const Standard_Real Param1, const Standard_Real Param2, const Standard_Real Param3, const Standard_Real Tolerance)
 This method implements the algorithms used to create 2d circles tangent to a circle and 2 curves. More...
 
 Geom2dGcc_Circ2d3TanIter (const GccEnt_QualifiedCirc &Qualified1, const GccEnt_QualifiedLin &Qualified2, const Geom2dGcc_QCurve &Qualified3, const Standard_Real Param1, const Standard_Real Param2, const Standard_Real Param3, const Standard_Real Tolerance)
 This method implements the algorithms used to create 2d circles tangent to a circle and a line and a curve. More...
 
 Geom2dGcc_Circ2d3TanIter (const GccEnt_QualifiedCirc &Qualified1, const Geom2dGcc_QCurve &Qualified2, const gp_Pnt2d &Point3, const Standard_Real Param1, const Standard_Real Param2, const Standard_Real Tolerance)
 This method implements the algorithms used to create 2d circles tangent to a circle and a point and a curve. More...
 
 Geom2dGcc_Circ2d3TanIter (const GccEnt_QualifiedLin &Qualified1, const GccEnt_QualifiedLin &Qualified2, const Geom2dGcc_QCurve &Qualified3, const Standard_Real Param1, const Standard_Real Param2, const Standard_Real Param3, const Standard_Real Tolerance)
 This method implements the algorithms used to create 2d circles tangent to 2 lines and a curve. More...
 
 Geom2dGcc_Circ2d3TanIter (const GccEnt_QualifiedLin &Qualified1, const Geom2dGcc_QCurve &Qualified2, const Geom2dGcc_QCurve &Qualified3, const Standard_Real Param1, const Standard_Real Param2, const Standard_Real Param3, const Standard_Real Tolerance)
 This method implements the algorithms used to create 2d circles tangent to a line and 2 curves. More...
 
 Geom2dGcc_Circ2d3TanIter (const GccEnt_QualifiedLin &Qualified1, const Geom2dGcc_QCurve &Qualified2, const gp_Pnt2d &Point3, const Standard_Real Param1, const Standard_Real Param2, const Standard_Real Tolerance)
 This method implements the algorithms used to create 2d circles tangent to a line and a curve and a point. More...
 
 Geom2dGcc_Circ2d3TanIter (const Geom2dGcc_QCurve &Qualified1, const gp_Pnt2d &Point1, const gp_Pnt2d &Point2, const Standard_Real Param1, const Standard_Real Tolerance)
 This method implements the algorithms used to create 2d circles tangent to a curve and 2 points. More...
 
 Geom2dGcc_Circ2d3TanIter (const Geom2dGcc_QCurve &Qualified1, const Geom2dGcc_QCurve &Qualified2, const gp_Pnt2d &Point2, const Standard_Real Param1, const Standard_Real Param2, const Standard_Real Tolerance)
 This method implements the algorithms used to create 2d circles tangent to 2 curves and a point. More...
 
 Geom2dGcc_Circ2d3TanIter (const Geom2dGcc_QCurve &Qualified1, const Geom2dGcc_QCurve &Qualified2, const Geom2dGcc_QCurve &Qualified3, const Standard_Real Param1, const Standard_Real Param2, const Standard_Real Param3, const Standard_Real Tolerance)
 This method implements the algorithms used to create 2d circles tangent to 3 curves. More...
 
Standard_Boolean IsDone () const
 This method returns True if the construction algorithm succeeded. More...
 
gp_Circ2d ThisSolution () const
 Returns the solution. It raises NotDone if the construction algorithm didn't succeed. More...
 
void WhichQualifier (GccEnt_Position &Qualif1, GccEnt_Position &Qualif2, GccEnt_Position &Qualif3) const
 
void Tangency1 (Standard_Real &ParSol, Standard_Real &ParArg, gp_Pnt2d &PntSol) const
 Returns informations about the tangency point between the result and the first argument. ParSol is the intrinsic parameter of the point PntSol on the solution curv. ParArg is the intrinsic parameter of the point PntSol on the argument curv. It raises NotDone if the construction algorithm didn't succeed. More...
 
void Tangency2 (Standard_Real &ParSol, Standard_Real &ParArg, gp_Pnt2d &PntSol) const
 Returns informations about the tangency point between the result and the second argument. ParSol is the intrinsic parameter of the point PntSol on the solution curv. ParArg is the intrinsic parameter of the point PntSol on the argument curv. It raises NotDone if the construction algorithm didn't succeed. More...
 
void Tangency3 (Standard_Real &ParSol, Standard_Real &ParArg, gp_Pnt2d &PntSol) const
 Returns informations about the tangency point between the result and the third argument. ParSol is the intrinsic parameter of the point PntSol on the solution curv. ParArg is the intrinsic parameter of the point PntSol on the argument curv. It raises NotDone if the construction algorithm didn't succeed. More...
 
Standard_Boolean IsTheSame1 () const
 It raises NotDone if the construction algorithm didn't succeed. More...
 
Standard_Boolean IsTheSame2 () const
 It raises NotDone if the construction algorithm didn't succeed. More...
 
Standard_Boolean IsTheSame3 () const
 It raises NotDone if the construction algorithm didn't succeed. More...
 

Detailed Description

This class implements the algorithms used to create 2d circles tangent to 3 points/lines/circles/ curves with one curve or more. The arguments of all construction methods are :

Constructor & Destructor Documentation

◆ Geom2dGcc_Circ2d3TanIter() [1/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter ( const GccEnt_QualifiedCirc Qualified1,
const GccEnt_QualifiedCirc Qualified2,
const Geom2dGcc_QCurve Qualified3,
const Standard_Real  Param1,
const Standard_Real  Param2,
const Standard_Real  Param3,
const Standard_Real  Tolerance 
)

This method implements the algorithms used to create 2d circles tangent to 2 circles and a curve.

◆ Geom2dGcc_Circ2d3TanIter() [2/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter ( const GccEnt_QualifiedCirc Qualified1,
const Geom2dGcc_QCurve Qualified2,
const Geom2dGcc_QCurve Qualified3,
const Standard_Real  Param1,
const Standard_Real  Param2,
const Standard_Real  Param3,
const Standard_Real  Tolerance 
)

This method implements the algorithms used to create 2d circles tangent to a circle and 2 curves.

◆ Geom2dGcc_Circ2d3TanIter() [3/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter ( const GccEnt_QualifiedCirc Qualified1,
const GccEnt_QualifiedLin Qualified2,
const Geom2dGcc_QCurve Qualified3,
const Standard_Real  Param1,
const Standard_Real  Param2,
const Standard_Real  Param3,
const Standard_Real  Tolerance 
)

This method implements the algorithms used to create 2d circles tangent to a circle and a line and a curve.

◆ Geom2dGcc_Circ2d3TanIter() [4/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter ( const GccEnt_QualifiedCirc Qualified1,
const Geom2dGcc_QCurve Qualified2,
const gp_Pnt2d Point3,
const Standard_Real  Param1,
const Standard_Real  Param2,
const Standard_Real  Tolerance 
)

This method implements the algorithms used to create 2d circles tangent to a circle and a point and a curve.

◆ Geom2dGcc_Circ2d3TanIter() [5/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter ( const GccEnt_QualifiedLin Qualified1,
const GccEnt_QualifiedLin Qualified2,
const Geom2dGcc_QCurve Qualified3,
const Standard_Real  Param1,
const Standard_Real  Param2,
const Standard_Real  Param3,
const Standard_Real  Tolerance 
)

This method implements the algorithms used to create 2d circles tangent to 2 lines and a curve.

◆ Geom2dGcc_Circ2d3TanIter() [6/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter ( const GccEnt_QualifiedLin Qualified1,
const Geom2dGcc_QCurve Qualified2,
const Geom2dGcc_QCurve Qualified3,
const Standard_Real  Param1,
const Standard_Real  Param2,
const Standard_Real  Param3,
const Standard_Real  Tolerance 
)

This method implements the algorithms used to create 2d circles tangent to a line and 2 curves.

◆ Geom2dGcc_Circ2d3TanIter() [7/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter ( const GccEnt_QualifiedLin Qualified1,
const Geom2dGcc_QCurve Qualified2,
const gp_Pnt2d Point3,
const Standard_Real  Param1,
const Standard_Real  Param2,
const Standard_Real  Tolerance 
)

This method implements the algorithms used to create 2d circles tangent to a line and a curve and a point.

◆ Geom2dGcc_Circ2d3TanIter() [8/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter ( const Geom2dGcc_QCurve Qualified1,
const gp_Pnt2d Point1,
const gp_Pnt2d Point2,
const Standard_Real  Param1,
const Standard_Real  Tolerance 
)

This method implements the algorithms used to create 2d circles tangent to a curve and 2 points.

◆ Geom2dGcc_Circ2d3TanIter() [9/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter ( const Geom2dGcc_QCurve Qualified1,
const Geom2dGcc_QCurve Qualified2,
const gp_Pnt2d Point2,
const Standard_Real  Param1,
const Standard_Real  Param2,
const Standard_Real  Tolerance 
)

This method implements the algorithms used to create 2d circles tangent to 2 curves and a point.

◆ Geom2dGcc_Circ2d3TanIter() [10/10]

Geom2dGcc_Circ2d3TanIter::Geom2dGcc_Circ2d3TanIter ( const Geom2dGcc_QCurve Qualified1,
const Geom2dGcc_QCurve Qualified2,
const Geom2dGcc_QCurve Qualified3,
const Standard_Real  Param1,
const Standard_Real  Param2,
const Standard_Real  Param3,
const Standard_Real  Tolerance 
)

This method implements the algorithms used to create 2d circles tangent to 3 curves.

Member Function Documentation

◆ IsDone()

Standard_Boolean Geom2dGcc_Circ2d3TanIter::IsDone ( ) const

This method returns True if the construction algorithm succeeded.

◆ IsTheSame1()

Standard_Boolean Geom2dGcc_Circ2d3TanIter::IsTheSame1 ( ) const

It raises NotDone if the construction algorithm didn't succeed.

◆ IsTheSame2()

Standard_Boolean Geom2dGcc_Circ2d3TanIter::IsTheSame2 ( ) const

It raises NotDone if the construction algorithm didn't succeed.

◆ IsTheSame3()

Standard_Boolean Geom2dGcc_Circ2d3TanIter::IsTheSame3 ( ) const

It raises NotDone if the construction algorithm didn't succeed.

◆ Tangency1()

void Geom2dGcc_Circ2d3TanIter::Tangency1 ( Standard_Real ParSol,
Standard_Real ParArg,
gp_Pnt2d PntSol 
) const

Returns informations about the tangency point between the result and the first argument. ParSol is the intrinsic parameter of the point PntSol on the solution curv. ParArg is the intrinsic parameter of the point PntSol on the argument curv. It raises NotDone if the construction algorithm didn't succeed.

◆ Tangency2()

void Geom2dGcc_Circ2d3TanIter::Tangency2 ( Standard_Real ParSol,
Standard_Real ParArg,
gp_Pnt2d PntSol 
) const

Returns informations about the tangency point between the result and the second argument. ParSol is the intrinsic parameter of the point PntSol on the solution curv. ParArg is the intrinsic parameter of the point PntSol on the argument curv. It raises NotDone if the construction algorithm didn't succeed.

◆ Tangency3()

void Geom2dGcc_Circ2d3TanIter::Tangency3 ( Standard_Real ParSol,
Standard_Real ParArg,
gp_Pnt2d PntSol 
) const

Returns informations about the tangency point between the result and the third argument. ParSol is the intrinsic parameter of the point PntSol on the solution curv. ParArg is the intrinsic parameter of the point PntSol on the argument curv. It raises NotDone if the construction algorithm didn't succeed.

◆ ThisSolution()

gp_Circ2d Geom2dGcc_Circ2d3TanIter::ThisSolution ( ) const

Returns the solution. It raises NotDone if the construction algorithm didn't succeed.

◆ WhichQualifier()

void Geom2dGcc_Circ2d3TanIter::WhichQualifier ( GccEnt_Position Qualif1,
GccEnt_Position Qualif2,
GccEnt_Position Qualif3 
) const

The documentation for this class was generated from the following file: