Open CASCADE Technology  7.4.0
Public Member Functions
Geom_Circle Class Reference

Describes a circle in 3D space. A circle is defined by its radius and, as with any conic curve, is positioned in space with a right-handed coordinate system (gp_Ax2 object) where: More...

#include <Geom_Circle.hxx>

Inheritance diagram for Geom_Circle:
Inheritance graph
[legend]

Public Member Functions

 Geom_Circle (const gp_Circ &C)
 Constructs a circle by conversion of the gp_Circ circle C. More...
 
 Geom_Circle (const gp_Ax2 &A2, const Standard_Real Radius)
 Constructs a circle of radius Radius, where A2 locates the circle and defines its orientation in 3D space such that: More...
 
void SetCirc (const gp_Circ &C)
 Set <me> so that <me> has the same geometric properties as C. More...
 
void SetRadius (const Standard_Real R)
 Assigns the value R to the radius of this circle. Note: it is possible to have a circle with a radius equal to 0.0. Exceptions - Standard_ConstructionError if R is negative. More...
 
gp_Circ Circ () const
 returns the non transient circle from gp with the same geometric properties as <me>. More...
 
Standard_Real Radius () const
 Returns the radius of this circle. More...
 
Standard_Real ReversedParameter (const Standard_Real U) const override
 Computes the parameter on the reversed circle for the point of parameter U on this circle. For a circle, the returned value is: 2.*Pi - U. More...
 
Standard_Real Eccentricity () const override
 Returns the eccentricity e = 0 for a circle. More...
 
Standard_Real FirstParameter () const override
 Returns the value of the first parameter of this circle. This is 0.0, which gives the start point of this circle, or The start point and end point of a circle are coincident. More...
 
Standard_Real LastParameter () const override
 Returns the value of the last parameter of this circle. This is 2.*Pi, which gives the end point of this circle. The start point and end point of a circle are coincident. More...
 
Standard_Boolean IsClosed () const override
 returns True. More...
 
Standard_Boolean IsPeriodic () const override
 returns True. More...
 
void D0 (const Standard_Real U, gp_Pnt &P) const override
 Returns in P the point of parameter U. P = C + R * Cos (U) * XDir + R * Sin (U) * YDir where C is the center of the circle , XDir the XDirection and YDir the YDirection of the circle's local coordinate system. More...
 
void D1 (const Standard_Real U, gp_Pnt &P, gp_Vec &V1) const override
 Returns the point P of parameter U and the first derivative V1. More...
 
void D2 (const Standard_Real U, gp_Pnt &P, gp_Vec &V1, gp_Vec &V2) const override
 Returns the point P of parameter U, the first and second derivatives V1 and V2. More...
 
void D3 (const Standard_Real U, gp_Pnt &P, gp_Vec &V1, gp_Vec &V2, gp_Vec &V3) const override
 Returns the point P of parameter u, the first second and third derivatives V1 V2 and V3. More...
 
gp_Vec DN (const Standard_Real U, const Standard_Integer N) const override
 The returned vector gives the value of the derivative for the order of derivation N. Raised if N < 1. More...
 
void Transform (const gp_Trsf &T) override
 Applies the transformation T to this circle. More...
 
Handle< Geom_GeometryCopy () const override
 Creates a new object which is a copy of this circle. More...
 
- Public Member Functions inherited from Geom_Conic
void SetAxis (const gp_Ax1 &A1)
 Changes the orientation of the conic's plane. The normal axis to the plane is A1. The XAxis and the YAxis are recomputed. More...
 
void SetLocation (const gp_Pnt &P)
 changes the location point of the conic. More...
 
void SetPosition (const gp_Ax2 &A2)
 changes the local coordinate system of the conic. More...
 
gp_Ax1 Axis () const
 Returns the "main Axis" of this conic. This axis is normal to the plane of the conic. More...
 
gp_Pnt Location () const
 Returns the location point of the conic. For the circle, the ellipse and the hyperbola it is the center of the conic. For the parabola it is the Apex of the parabola. More...
 
const gp_Ax2Position () const
 Returns the local coordinates system of the conic. The main direction of the Axis2Placement is normal to the plane of the conic. The X direction of the Axis2placement is in the plane of the conic and corresponds to the origin for the conic's parametric value u. More...
 
gp_Ax1 XAxis () const
 Returns the XAxis of the conic. This axis defines the origin of parametrization of the conic. This axis is perpendicular to the Axis of the conic. This axis and the Yaxis define the plane of the conic. More...
 
gp_Ax1 YAxis () const
 Returns the YAxis of the conic. The YAxis is perpendicular to the Xaxis. This axis and the Xaxis define the plane of the conic. More...
 
void Reverse () override
 Reverses the direction of parameterization of <me>. The local coordinate system of the conic is modified. More...
 
GeomAbs_Shape Continuity () const override
 The continuity of the conic is Cn. More...
 
Standard_Boolean IsCN (const Standard_Integer N) const override
 Returns True. Raised if N < 0. More...
 
- Public Member Functions inherited from Geom_Curve
virtual Standard_Real TransformedParameter (const Standard_Real U, const gp_Trsf &T) const
 Returns the parameter on the transformed curve for the transform of the point of parameter U on <me>. More...
 
virtual Standard_Real ParametricTransformation (const gp_Trsf &T) const
 Returns a coefficient to compute the parameter on the transformed curve for the transform of the point on <me>. More...
 
Handle< Geom_CurveReversed () const
 Returns a copy of <me> reversed. More...
 
virtual Standard_Real Period () const
 Returns the period of this curve. Exceptions Standard_NoSuchObject if this curve is not periodic. More...
 
gp_Pnt Value (const Standard_Real U) const
 Computes the point of parameter U on <me>. If the curve is periodic then the returned point is P(U) with U = Ustart + (U - Uend) where Ustart and Uend are the parametric bounds of the curve. it is implemented with D0. More...
 
- Public Member Functions inherited from Geom_Geometry
void Mirror (const gp_Pnt &P)
 Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry. More...
 
void Mirror (const gp_Ax1 &A1)
 Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. More...
 
void Mirror (const gp_Ax2 &A2)
 Performs the symmetrical transformation of a Geometry with respect to a plane. The axis placement A2 locates the plane of the symmetry : (Location, XDirection, YDirection). More...
 
void Rotate (const gp_Ax1 &A1, const Standard_Real Ang)
 Rotates a Geometry. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians. More...
 
void Scale (const gp_Pnt &P, const Standard_Real S)
 Scales a Geometry. S is the scaling value. More...
 
void Translate (const gp_Vec &V)
 Translates a Geometry. V is the vector of the tanslation. More...
 
void Translate (const gp_Pnt &P1, const gp_Pnt &P2)
 Translates a Geometry from the point P1 to the point P2. More...
 
Handle< Geom_GeometryMirrored (const gp_Pnt &P) const
 
Handle< Geom_GeometryMirrored (const gp_Ax1 &A1) const
 
Handle< Geom_GeometryMirrored (const gp_Ax2 &A2) const
 
Handle< Geom_GeometryRotated (const gp_Ax1 &A1, const Standard_Real Ang) const
 
Handle< Geom_GeometryScaled (const gp_Pnt &P, const Standard_Real S) const
 
Handle< Geom_GeometryTransformed (const gp_Trsf &T) const
 
Handle< Geom_GeometryTranslated (const gp_Vec &V) const
 
Handle< Geom_GeometryTranslated (const gp_Pnt &P1, const gp_Pnt &P2) const
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 
- Protected Attributes inherited from Geom_Conic
gp_Ax2 pos
 

Detailed Description

Describes a circle in 3D space. A circle is defined by its radius and, as with any conic curve, is positioned in space with a right-handed coordinate system (gp_Ax2 object) where:

Constructor & Destructor Documentation

◆ Geom_Circle() [1/2]

Geom_Circle::Geom_Circle ( const gp_Circ C)

Constructs a circle by conversion of the gp_Circ circle C.

◆ Geom_Circle() [2/2]

Geom_Circle::Geom_Circle ( const gp_Ax2 A2,
const Standard_Real  Radius 
)

Constructs a circle of radius Radius, where A2 locates the circle and defines its orientation in 3D space such that:

  • the center of the circle is the origin of A2,
  • the origin, "X Direction" and "Y Direction" of A2 define the plane of the circle,
  • A2 is the local coordinate system of the circle. Note: It is possible to create a circle where Radius is equal to 0.0. raised if Radius < 0.

Member Function Documentation

◆ Circ()

gp_Circ Geom_Circle::Circ ( ) const

returns the non transient circle from gp with the same geometric properties as <me>.

◆ Copy()

Handle< Geom_Geometry > Geom_Circle::Copy ( ) const
overridevirtual

Creates a new object which is a copy of this circle.

Implements Geom_Geometry.

◆ D0()

void Geom_Circle::D0 ( const Standard_Real  U,
gp_Pnt P 
) const
overridevirtual

Returns in P the point of parameter U. P = C + R * Cos (U) * XDir + R * Sin (U) * YDir where C is the center of the circle , XDir the XDirection and YDir the YDirection of the circle's local coordinate system.

Implements Geom_Curve.

◆ D1()

void Geom_Circle::D1 ( const Standard_Real  U,
gp_Pnt P,
gp_Vec V1 
) const
overridevirtual

Returns the point P of parameter U and the first derivative V1.

Implements Geom_Curve.

◆ D2()

void Geom_Circle::D2 ( const Standard_Real  U,
gp_Pnt P,
gp_Vec V1,
gp_Vec V2 
) const
overridevirtual

Returns the point P of parameter U, the first and second derivatives V1 and V2.

Implements Geom_Curve.

◆ D3()

void Geom_Circle::D3 ( const Standard_Real  U,
gp_Pnt P,
gp_Vec V1,
gp_Vec V2,
gp_Vec V3 
) const
overridevirtual

Returns the point P of parameter u, the first second and third derivatives V1 V2 and V3.

Implements Geom_Curve.

◆ DN()

gp_Vec Geom_Circle::DN ( const Standard_Real  U,
const Standard_Integer  N 
) const
overridevirtual

The returned vector gives the value of the derivative for the order of derivation N. Raised if N < 1.

Implements Geom_Curve.

◆ Eccentricity()

Standard_Real Geom_Circle::Eccentricity ( ) const
overridevirtual

Returns the eccentricity e = 0 for a circle.

Implements Geom_Conic.

◆ FirstParameter()

Standard_Real Geom_Circle::FirstParameter ( ) const
overridevirtual

Returns the value of the first parameter of this circle. This is 0.0, which gives the start point of this circle, or The start point and end point of a circle are coincident.

Implements Geom_Curve.

◆ IsClosed()

Standard_Boolean Geom_Circle::IsClosed ( ) const
overridevirtual

returns True.

Implements Geom_Curve.

◆ IsPeriodic()

Standard_Boolean Geom_Circle::IsPeriodic ( ) const
overridevirtual

returns True.

Implements Geom_Curve.

◆ LastParameter()

Standard_Real Geom_Circle::LastParameter ( ) const
overridevirtual

Returns the value of the last parameter of this circle. This is 2.*Pi, which gives the end point of this circle. The start point and end point of a circle are coincident.

Implements Geom_Curve.

◆ Radius()

Standard_Real Geom_Circle::Radius ( ) const

Returns the radius of this circle.

◆ ReversedParameter()

Standard_Real Geom_Circle::ReversedParameter ( const Standard_Real  U) const
overridevirtual

Computes the parameter on the reversed circle for the point of parameter U on this circle. For a circle, the returned value is: 2.*Pi - U.

Implements Geom_Conic.

◆ SetCirc()

void Geom_Circle::SetCirc ( const gp_Circ C)

Set <me> so that <me> has the same geometric properties as C.

◆ SetRadius()

void Geom_Circle::SetRadius ( const Standard_Real  R)

Assigns the value R to the radius of this circle. Note: it is possible to have a circle with a radius equal to 0.0. Exceptions - Standard_ConstructionError if R is negative.

◆ Transform()

void Geom_Circle::Transform ( const gp_Trsf T)
overridevirtual

Applies the transformation T to this circle.

Implements Geom_Geometry.


The documentation for this class was generated from the following file: