Geom_OffsetSurface Class Reference

Describes an offset surface in 3D space. An offset surface is defined by: More...

#include <Geom_OffsetSurface.hxx>

Inheritance diagram for Geom_OffsetSurface:

Public Member Functions
	Geom_OffsetSurface (const Handle< Geom_Surface > &S, const Standard_Real Offset, const Standard_Boolean isNotCheckC0=Standard_False)
	Constructs a surface offset from the basis surface S, where Offset is the distance between the offset surface and the basis surface at any point. A point on the offset surface is built by measuring the offset value along a normal vector at a point on S. This normal vector is given by the cross product D1u^D1v, where D1u and D1v are the vectors tangential to the basis surface in the u and v parametric directions at this point. The side of S on which the offset value is measured is indicated by this normal vector if Offset is positive, or is the inverse sense if Offset is negative. If isNotCheckC0 = TRUE checking if basis surface has C0-continuity is not made. Warnings : More...
void	SetBasisSurface (const Handle< Geom_Surface > &S, const Standard_Boolean isNotCheckC0=Standard_False)
	Raised if S is not at least C1. Warnings : No check is done to verify that a unique normal direction is defined at any point of the basis surface S. If isNotCheckC0 = TRUE checking if basis surface has C0-continuity is not made. Exceptions Standard_ConstructionError if the surface S is not at least "C1" continuous. More...
void	SetOffsetValue (const Standard_Real D)
	Changes this offset surface by assigning D as the offset value. More...
Standard_Real	Offset () const
	Returns the offset value of this offset surface. More...
const Handle< Geom_Surface > &	BasisSurface () const
	Returns the basis surface of this offset surface. Note: The basis surface can be an offset surface. More...
const Handle< Geom_OsculatingSurface > &	OsculatingSurface () const
	Returns osculating surface if base surface is B-spline or Bezier. More...
void	UReverse () override
	Changes the orientation of this offset surface in the u parametric direction. The bounds of the surface are not changed but the given parametric direction is reversed. More...
Standard_Real	UReversedParameter (const Standard_Real U) const override
	Computes the u parameter on the modified surface, produced by reversing the u parametric direction of this offset surface, for any point of u parameter U on this offset surface. More...
void	VReverse () override
	Changes the orientation of this offset surface in the v parametric direction. The bounds of the surface are not changed but the given parametric direction is reversed. More...
Standard_Real	VReversedParameter (const Standard_Real V) const override
	Computes the v parameter on the modified surface, produced by reversing the or v parametric direction of this offset surface, for any point of v parameter V on this offset surface. More...
void	Bounds (Standard_Real &U1, Standard_Real &U2, Standard_Real &V1, Standard_Real &V2) const override
	Returns the parametric bounds U1, U2, V1 and V2 of this offset surface. If the surface is infinite, this function can return: More...
GeomAbs_Shape	Continuity () const override
	This method returns the continuity of the basis surface - 1. Continuity of the Offset surface : C0 : only geometric continuity, C1 : continuity of the first derivative all along the Surface, C2 : continuity of the second derivative all along the Surface, C3 : continuity of the third derivative all along the Surface, CN : the order of continuity is infinite. Example : If the basis surface is C2 in the V direction and C3 in the U direction Shape = C1. Warnings : If the basis surface has a unique normal direction defined at any point this method gives the continuity of the offset surface otherwise the effective continuity can be lower than the continuity of the basis surface - 1. More...
Standard_Boolean	IsCNu (const Standard_Integer N) const override
	This method answer True if the continuity of the basis surface is N + 1 in the U parametric direction. We suppose in this class that a unique normal is defined at any point on the basis surface. Raised if N <0. More...
Standard_Boolean	IsCNv (const Standard_Integer N) const override
	This method answer True if the continuity of the basis surface is N + 1 in the V parametric direction. We suppose in this class that a unique normal is defined at any point on the basis surface. Raised if N <0. More...
Standard_Boolean	IsUClosed () const override
	Checks whether this offset surface is closed in the u parametric direction. Returns true if, taking uFirst and uLast as the parametric bounds in the u parametric direction, the distance between the points P(uFirst,v) and P(uLast,v) is less than or equal to gp::Resolution() for each value of the parameter v. More...
Standard_Boolean	IsVClosed () const override
	Checks whether this offset surface is closed in the u or v parametric direction. Returns true if taking vFirst and vLast as the parametric bounds in the v parametric direction, the distance between the points P(u,vFirst) and P(u,vLast) is less than or equal to gp::Resolution() for each value of the parameter u. More...
Standard_Boolean	IsUPeriodic () const override
	Returns true if this offset surface is periodic in the u parametric direction, i.e. if the basis surface of this offset surface is periodic in this direction. More...
virtual Standard_Real	UPeriod () const override
	Returns the period of this offset surface in the u parametric direction respectively, i.e. the period of the basis surface of this offset surface in this parametric direction. raises if the surface is not uperiodic. More...
Standard_Boolean	IsVPeriodic () const override
	Returns true if this offset surface is periodic in the v parametric direction, i.e. if the basis surface of this offset surface is periodic in this direction. More...
virtual Standard_Real	VPeriod () const override
	Returns the period of this offset surface in the v parametric direction respectively, i.e. the period of the basis surface of this offset surface in this parametric direction. raises if the surface is not vperiodic. More...
Handle< Geom_Curve >	UIso (const Standard_Real U) const override
	Computes the U isoparametric curve. More...
Handle< Geom_Curve >	VIso (const Standard_Real V) const override
	Computes the V isoparametric curve. More...
void	D0 (const Standard_Real U, const Standard_Real V, gp_Pnt &P) const override
	P (U, V) = Pbasis + Offset * Ndir where Ndir = D1Ubasis ^ D1Vbasis / ||D1Ubasis ^ D1Vbasis|| is the normal direction of the basis surface. Pbasis, D1Ubasis, D1Vbasis are the point and the first derivatives on the basis surface. If Ndir is undefined this method computes an approched normal direction using the following limited development : Ndir = N0 + DNdir/DU + DNdir/DV + Eps with Eps->0 which requires to compute the second derivatives on the basis surface. If the normal direction cannot be approximate for this order of derivation the exception UndefinedValue is raised. More...
void	D1 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V) const override
	Raised if the continuity of the basis surface is not C2. More...
void	D2 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV) const override
	—Purpose ; Raised if the continuity of the basis surface is not C3. More...
void	D3 (const Standard_Real U, const Standard_Real V, gp_Pnt &P, gp_Vec &D1U, gp_Vec &D1V, gp_Vec &D2U, gp_Vec &D2V, gp_Vec &D2UV, gp_Vec &D3U, gp_Vec &D3V, gp_Vec &D3UUV, gp_Vec &D3UVV) const override
	Raised if the continuity of the basis surface is not C4. More...
gp_Vec	DN (const Standard_Real U, const Standard_Real V, const Standard_Integer Nu, const Standard_Integer Nv) const override
	Computes the derivative of order Nu in the direction u and Nv in the direction v. —Purpose ; Raised if the continuity of the basis surface is not CNu + 1 in the U direction and CNv + 1 in the V direction. Raised if Nu + Nv < 1 or Nu < 0 or Nv < 0. More...
void	Transform (const gp_Trsf &T) override
	Applies the transformation T to this offset surface. Note: the basis surface is also modified. More...
virtual void	TransformParameters (Standard_Real &U, Standard_Real &V, const gp_Trsf &T) const override
	Computes the parameters on the transformed surface for the transform of the point of parameters U,V on <me>. More...
virtual gp_GTrsf2d	ParametricTransformation (const gp_Trsf &T) const override
	Returns a 2d transformation used to find the new parameters of a point on the transformed surface. More...
Handle< Geom_Geometry >	Copy () const override
	Creates a new object which is a copy of this offset surface. More...
Handle< Geom_Surface >	Surface () const
	returns an equivalent surface of the offset surface when the basis surface is a canonic surface or a rectangular limited surface on canonic surface or if the offset is null. More...
Standard_Boolean	UOsculatingSurface (const Standard_Real U, const Standard_Real V, Standard_Boolean &IsOpposite, Handle< Geom_BSplineSurface > &UOsculSurf) const
	if Standard_True, L is the local osculating surface along U at the point U,V. It means that DL/DU is collinear to DS/DU . If IsOpposite == Standard_True these vectors have opposite direction. More...
Standard_Boolean	VOsculatingSurface (const Standard_Real U, const Standard_Real V, Standard_Boolean &IsOpposite, Handle< Geom_BSplineSurface > &VOsculSurf) const
	if Standard_True, L is the local osculating surface along V at the point U,V. It means that DL/DV is collinear to DS/DV . If IsOpposite == Standard_True these vectors have opposite direction. More...
GeomAbs_Shape	GetBasisSurfContinuity () const
	Returns continuity of the basis surface. More...
Public Member Functions inherited from Geom_Surface
Handle< Geom_Surface >	UReversed () const
	Reverses the U direction of parametrization of <me>. The bounds of the surface are not modified. A copy of <me> is returned. More...
Handle< Geom_Surface >	VReversed () const
	Reverses the V direction of parametrization of <me>. The bounds of the surface are not modified. A copy of <me> is returned. More...
gp_Pnt	Value (const Standard_Real U, const Standard_Real V) const
	Computes the point of parameter U on the surface. More...
Public Member Functions inherited from Geom_Geometry
void	Mirror (const gp_Pnt &P)
	Performs the symmetrical transformation of a Geometry with respect to the point P which is the center of the symmetry. More...
void	Mirror (const gp_Ax1 &A1)
	Performs the symmetrical transformation of a Geometry with respect to an axis placement which is the axis of the symmetry. More...
void	Mirror (const gp_Ax2 &A2)
	Performs the symmetrical transformation of a Geometry with respect to a plane. The axis placement A2 locates the plane of the symmetry : (Location, XDirection, YDirection). More...
void	Rotate (const gp_Ax1 &A1, const Standard_Real Ang)
	Rotates a Geometry. A1 is the axis of the rotation. Ang is the angular value of the rotation in radians. More...
void	Scale (const gp_Pnt &P, const Standard_Real S)
	Scales a Geometry. S is the scaling value. More...
void	Translate (const gp_Vec &V)
	Translates a Geometry. V is the vector of the tanslation. More...
void	Translate (const gp_Pnt &P1, const gp_Pnt &P2)
	Translates a Geometry from the point P1 to the point P2. More...
Handle< Geom_Geometry >	Mirrored (const gp_Pnt &P) const
Handle< Geom_Geometry >	Mirrored (const gp_Ax1 &A1) const
Handle< Geom_Geometry >	Mirrored (const gp_Ax2 &A2) const
Handle< Geom_Geometry >	Rotated (const gp_Ax1 &A1, const Standard_Real Ang) const
Handle< Geom_Geometry >	Scaled (const gp_Pnt &P, const Standard_Real S) const
Handle< Geom_Geometry >	Transformed (const gp_Trsf &T) const
Handle< Geom_Geometry >	Translated (const gp_Vec &V) const
Handle< Geom_Geometry >	Translated (const gp_Pnt &P1, const gp_Pnt &P2) const
Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...
	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...
Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...
virtual	~Standard_Transient ()
	Destructor must be virtual. More...
virtual void	Delete () const
	Memory deallocator for transient classes. More...
virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...
Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...
Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...
Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...
void	IncrementRefCounter () const
	Increments the reference counter of this object. More...
Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...
Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...
static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Detailed Description

Describes an offset surface in 3D space. An offset surface is defined by:

• the basis surface to which it is parallel, and
• the distance between the offset surface and its basis surface. A point on the offset surface is built by measuring the offset value along the normal vector at a point on the basis surface. This normal vector is given by the cross product D1u^D1v, where D1u and D1v are the vectors tangential to the basis surface in the u and v parametric directions at this point. The side of the basis surface on which the offset is measured depends on the sign of the offset value. A Geom_OffsetSurface surface can be self-intersecting, even if the basis surface does not self-intersect. The self-intersecting portions are not deleted at the time of construction. Warning There must be only one normal vector defined at any point on the basis surface. This must be verified by the user as no check is made at the time of construction to detect points with multiple possible normal directions (for example, the top of a conical surface).

Constructor & Destructor Documentation

Geom_OffsetSurface()

Geom_OffsetSurface::Geom_OffsetSurface	(	const Handle< Geom_Surface > &	S,
		const Standard_Real	Offset,
		const Standard_Boolean	isNotCheckC0 = Standard_False
	)

Constructs a surface offset from the basis surface S, where Offset is the distance between the offset surface and the basis surface at any point. A point on the offset surface is built by measuring the offset value along a normal vector at a point on S. This normal vector is given by the cross product D1u^D1v, where D1u and D1v are the vectors tangential to the basis surface in the u and v parametric directions at this point. The side of S on which the offset value is measured is indicated by this normal vector if Offset is positive, or is the inverse sense if Offset is negative. If isNotCheckC0 = TRUE checking if basis surface has C0-continuity is not made. Warnings :

• The offset surface is built with a copy of the surface S. Therefore, when S is modified the offset surface is not modified.
• No check is made at the time of construction to detect points on S with multiple possible normal directions. Raised if S is not at least C1. Warnings : No check is done to verify that a unique normal direction is defined at any point of the basis surface S.

Member Function Documentation

BasisSurface()

const Handle< Geom_Surface >& Geom_OffsetSurface::BasisSurface ( ) const

inline

Returns the basis surface of this offset surface. Note: The basis surface can be an offset surface.

Bounds()

void Geom_OffsetSurface::Bounds ( Standard_Real &  U1, Standard_Real &  U2, Standard_Real &  V1, Standard_Real &  V2  ) const

overridevirtual

Returns the parametric bounds U1, U2, V1 and V2 of this offset surface. If the surface is infinite, this function can return:

• Standard_Real::RealFirst(), or
• Standard_Real::RealLast().

Implements Geom_Surface.

Continuity()

GeomAbs_Shape Geom_OffsetSurface::Continuity ( ) const

overridevirtual

This method returns the continuity of the basis surface - 1. Continuity of the Offset surface : C0 : only geometric continuity, C1 : continuity of the first derivative all along the Surface, C2 : continuity of the second derivative all along the Surface, C3 : continuity of the third derivative all along the Surface, CN : the order of continuity is infinite. Example : If the basis surface is C2 in the V direction and C3 in the U direction Shape = C1. Warnings : If the basis surface has a unique normal direction defined at any point this method gives the continuity of the offset surface otherwise the effective continuity can be lower than the continuity of the basis surface - 1.

Implements Geom_Surface.

Copy()

Handle< Geom_Geometry > Geom_OffsetSurface::Copy ( ) const

overridevirtual

Creates a new object which is a copy of this offset surface.

Implements Geom_Geometry.

D0()

void Geom_OffsetSurface::D0 ( const Standard_Real  U, const Standard_Real  V, gp_Pnt &  P  ) const

overridevirtual

P (U, V) = Pbasis + Offset * Ndir where Ndir = D1Ubasis ^ D1Vbasis / ||D1Ubasis ^ D1Vbasis|| is the normal direction of the basis surface. Pbasis, D1Ubasis, D1Vbasis are the point and the first derivatives on the basis surface. If Ndir is undefined this method computes an approched normal direction using the following limited development : Ndir = N0 + DNdir/DU + DNdir/DV + Eps with Eps->0 which requires to compute the second derivatives on the basis surface. If the normal direction cannot be approximate for this order of derivation the exception UndefinedValue is raised.

Raised if the continuity of the basis surface is not C1. Raised if the order of derivation required to compute the normal direction is greater than the second order.

Implements Geom_Surface.

D1()

void Geom_OffsetSurface::D1 ( const Standard_Real  U, const Standard_Real  V, gp_Pnt &  P, gp_Vec &  D1U, gp_Vec &  D1V  ) const

overridevirtual

Raised if the continuity of the basis surface is not C2.

Implements Geom_Surface.

D2()

void Geom_OffsetSurface::D2 ( const Standard_Real  U, const Standard_Real  V, gp_Pnt &  P, gp_Vec &  D1U, gp_Vec &  D1V, gp_Vec &  D2U, gp_Vec &  D2V, gp_Vec &  D2UV  ) const

overridevirtual

—Purpose ; Raised if the continuity of the basis surface is not C3.

Implements Geom_Surface.

D3()

void Geom_OffsetSurface::D3 ( const Standard_Real  U, const Standard_Real  V, gp_Pnt &  P, gp_Vec &  D1U, gp_Vec &  D1V, gp_Vec &  D2U, gp_Vec &  D2V, gp_Vec &  D2UV, gp_Vec &  D3U, gp_Vec &  D3V, gp_Vec &  D3UUV, gp_Vec &  D3UVV  ) const

overridevirtual

Raised if the continuity of the basis surface is not C4.

Implements Geom_Surface.

DN()

gp_Vec Geom_OffsetSurface::DN ( const Standard_Real  U, const Standard_Real  V, const Standard_Integer  Nu, const Standard_Integer  Nv  ) const

overridevirtual

Computes the derivative of order Nu in the direction u and Nv in the direction v. —Purpose ; Raised if the continuity of the basis surface is not CNu + 1 in the U direction and CNv + 1 in the V direction. Raised if Nu + Nv < 1 or Nu < 0 or Nv < 0.

The following methods compute the value and derivatives on the offset surface and returns the derivatives on the basis surface too. The computation of the value and derivatives on the basis surface are used to evaluate the offset surface.

Warnings : The exception UndefinedValue or UndefinedDerivative is raised if it is not possible to compute a unique offset direction.

Implements Geom_Surface.

GetBasisSurfContinuity()

GeomAbs_Shape Geom_OffsetSurface::GetBasisSurfContinuity ( ) const

inline

Returns continuity of the basis surface.

IsCNu()

Standard_Boolean Geom_OffsetSurface::IsCNu ( const Standard_Integer  N ) const

overridevirtual

This method answer True if the continuity of the basis surface is N + 1 in the U parametric direction. We suppose in this class that a unique normal is defined at any point on the basis surface. Raised if N <0.

Implements Geom_Surface.

IsCNv()

Standard_Boolean Geom_OffsetSurface::IsCNv ( const Standard_Integer  N ) const

overridevirtual

This method answer True if the continuity of the basis surface is N + 1 in the V parametric direction. We suppose in this class that a unique normal is defined at any point on the basis surface. Raised if N <0.

Implements Geom_Surface.

IsUClosed()

Standard_Boolean Geom_OffsetSurface::IsUClosed ( ) const

overridevirtual

Checks whether this offset surface is closed in the u parametric direction. Returns true if, taking uFirst and uLast as the parametric bounds in the u parametric direction, the distance between the points P(uFirst,v) and P(uLast,v) is less than or equal to gp::Resolution() for each value of the parameter v.

Implements Geom_Surface.

IsUPeriodic()

Standard_Boolean Geom_OffsetSurface::IsUPeriodic ( ) const

overridevirtual

Returns true if this offset surface is periodic in the u parametric direction, i.e. if the basis surface of this offset surface is periodic in this direction.

Implements Geom_Surface.

IsVClosed()

Standard_Boolean Geom_OffsetSurface::IsVClosed ( ) const

overridevirtual

Checks whether this offset surface is closed in the u or v parametric direction. Returns true if taking vFirst and vLast as the parametric bounds in the v parametric direction, the distance between the points P(u,vFirst) and P(u,vLast) is less than or equal to gp::Resolution() for each value of the parameter u.

Implements Geom_Surface.

IsVPeriodic()

Standard_Boolean Geom_OffsetSurface::IsVPeriodic ( ) const

overridevirtual

Returns true if this offset surface is periodic in the v parametric direction, i.e. if the basis surface of this offset surface is periodic in this direction.

Implements Geom_Surface.

Offset()

Standard_Real Geom_OffsetSurface::Offset ( ) const

inline

Returns the offset value of this offset surface.

OsculatingSurface()

const Handle< Geom_OsculatingSurface >& Geom_OffsetSurface::OsculatingSurface ( ) const

inline

Returns osculating surface if base surface is B-spline or Bezier.

ParametricTransformation()

virtual gp_GTrsf2d Geom_OffsetSurface::ParametricTransformation ( const gp_Trsf &  T ) const

overridevirtual

Returns a 2d transformation used to find the new parameters of a point on the transformed surface.

me->Transformed(T)->Value(U',V')

is the same point as

me->Value(U,V).Transformed(T)

Where U',V' are obtained by transforming U,V with th 2d transformation returned by

me->ParametricTransformation(T)

This methods calls the basis surface method.

Reimplemented from Geom_Surface.

SetBasisSurface()

void Geom_OffsetSurface::SetBasisSurface	(	const Handle< Geom_Surface > &	S,
		const Standard_Boolean	isNotCheckC0 = Standard_False
	)

Raised if S is not at least C1. Warnings : No check is done to verify that a unique normal direction is defined at any point of the basis surface S. If isNotCheckC0 = TRUE checking if basis surface has C0-continuity is not made. Exceptions Standard_ConstructionError if the surface S is not at least "C1" continuous.

SetOffsetValue()

void Geom_OffsetSurface::SetOffsetValue

(

const Standard_Real

D

)

Changes this offset surface by assigning D as the offset value.

Surface()

Handle< Geom_Surface > Geom_OffsetSurface::Surface

(

)

const

returns an equivalent surface of the offset surface when the basis surface is a canonic surface or a rectangular limited surface on canonic surface or if the offset is null.

Transform()

void Geom_OffsetSurface::Transform ( const gp_Trsf &  T )

overridevirtual

Applies the transformation T to this offset surface. Note: the basis surface is also modified.

Implements Geom_Geometry.

TransformParameters()

virtual void Geom_OffsetSurface::TransformParameters ( Standard_Real &  U, Standard_Real &  V, const gp_Trsf &  T  ) const

overridevirtual

Computes the parameters on the transformed surface for the transform of the point of parameters U,V on <me>.

me->Transformed(T)->Value(U',V')

is the same point as

me->Value(U,V).Transformed(T)

Where U',V' are the new values of U,V after calling

me->TranformParameters(U,V,T) This methods calls the basis surface method.

Reimplemented from Geom_Surface.

UIso()

Handle< Geom_Curve > Geom_OffsetSurface::UIso ( const Standard_Real  U ) const

overridevirtual

Computes the U isoparametric curve.

Implements Geom_Surface.

UOsculatingSurface()

Standard_Boolean Geom_OffsetSurface::UOsculatingSurface	(	const Standard_Real	U,
		const Standard_Real	V,
		Standard_Boolean &	IsOpposite,
		Handle< Geom_BSplineSurface > &	UOsculSurf
	)		const

if Standard_True, L is the local osculating surface along U at the point U,V. It means that DL/DU is collinear to DS/DU . If IsOpposite == Standard_True these vectors have opposite direction.

UPeriod()

virtual Standard_Real Geom_OffsetSurface::UPeriod ( ) const

overridevirtual

Returns the period of this offset surface in the u parametric direction respectively, i.e. the period of the basis surface of this offset surface in this parametric direction. raises if the surface is not uperiodic.

Reimplemented from Geom_Surface.

UReverse()

void Geom_OffsetSurface::UReverse ( )

overridevirtual

Changes the orientation of this offset surface in the u parametric direction. The bounds of the surface are not changed but the given parametric direction is reversed.

Implements Geom_Surface.

UReversedParameter()

Standard_Real Geom_OffsetSurface::UReversedParameter ( const Standard_Real  U ) const

overridevirtual

Computes the u parameter on the modified surface, produced by reversing the u parametric direction of this offset surface, for any point of u parameter U on this offset surface.

Implements Geom_Surface.

VIso()

Handle< Geom_Curve > Geom_OffsetSurface::VIso ( const Standard_Real  V ) const

overridevirtual

Computes the V isoparametric curve.

Te followings methods compute value and derivatives.

Warnings An exception is raised if a unique normal vector is not defined on the basis surface for the parametric value (U,V). No check is done at the creation time and we suppose in this package that the offset surface can be defined at any point.

Implements Geom_Surface.

VOsculatingSurface()

Standard_Boolean Geom_OffsetSurface::VOsculatingSurface	(	const Standard_Real	U,
		const Standard_Real	V,
		Standard_Boolean &	IsOpposite,
		Handle< Geom_BSplineSurface > &	VOsculSurf
	)		const

if Standard_True, L is the local osculating surface along V at the point U,V. It means that DL/DV is collinear to DS/DV . If IsOpposite == Standard_True these vectors have opposite direction.

VPeriod()

virtual Standard_Real Geom_OffsetSurface::VPeriod ( ) const

overridevirtual

Returns the period of this offset surface in the v parametric direction respectively, i.e. the period of the basis surface of this offset surface in this parametric direction. raises if the surface is not vperiodic.

Reimplemented from Geom_Surface.

VReverse()

void Geom_OffsetSurface::VReverse ( )

overridevirtual

Changes the orientation of this offset surface in the v parametric direction. The bounds of the surface are not changed but the given parametric direction is reversed.

Implements Geom_Surface.

VReversedParameter()

Standard_Real Geom_OffsetSurface::VReversedParameter ( const Standard_Real  V ) const

overridevirtual

Computes the v parameter on the modified surface, produced by reversing the or v parametric direction of this offset surface, for any point of v parameter V on this offset surface.

Implements Geom_Surface.

---

The documentation for this class was generated from the following file:

• Geom_OffsetSurface.hxx