Open CASCADE Technology  7.4.0
Public Member Functions | Protected Member Functions | Protected Attributes
ShapeUpgrade_RemoveInternalWires Class Reference

Removes all internal wires having area less than specified min area. More...

#include <ShapeUpgrade_RemoveInternalWires.hxx>

Inheritance diagram for ShapeUpgrade_RemoveInternalWires:
Inheritance graph
[legend]

Public Member Functions

 ShapeUpgrade_RemoveInternalWires ()
 Creates empty constructor. More...
 
 ShapeUpgrade_RemoveInternalWires (const TopoDS_Shape &theShape)
 
void Init (const TopoDS_Shape &theShape)
 Initialize by a Shape. More...
 
Standard_Boolean Perform ()
 Removes all internal wires having area less than area specified as minimal allowed area. More...
 
Standard_Boolean Perform (const TopTools_SequenceOfShape &theSeqShapes)
 If specified sequence of shape contains - 1.wires then these wires will be removed if they have area less than allowed min area. 2.faces than internal wires from these faces will be removed if they have area less than allowed min area. More...
 
TopoDS_Shape GetResult () const
 Get result shape. More...
 
Standard_RealMinArea ()
 Set min area allowed for holes( all holes having area less than mi area will be removed) More...
 
Standard_BooleanRemoveFaceMode ()
 Set mode which manage removing faces which have outer wires consisting only from edges belonginig to removed internal wires. By default it is equal to true. More...
 
const TopTools_SequenceOfShapeRemovedFaces () const
 Returns sequence of removed faces. More...
 
const TopTools_SequenceOfShapeRemovedWires () const
 Returns sequence of removed faces. More...
 
Standard_Boolean Status (const ShapeExtend_Status theStatus) const
 Queries status of last call to Perform() : OK - nothing was done :DONE1 - internal wires were removed :DONE2 - small faces were removed. :FAIL1 - initial shape is not specified :FAIL2 - specified sub-shape is not belonged to inotial shape. More...
 
- Public Member Functions inherited from ShapeUpgrade_Tool
 ShapeUpgrade_Tool ()
 Empty constructor. More...
 
void Set (const Handle< ShapeUpgrade_Tool > &tool)
 Copy all fields from another Root object. More...
 
void SetContext (const Handle< ShapeBuild_ReShape > &context)
 Sets context. More...
 
Handle< ShapeBuild_ReShapeContext () const
 Returns context. More...
 
void SetPrecision (const Standard_Real preci)
 Sets basic precision value. More...
 
Standard_Real Precision () const
 Returns basic precision value. More...
 
void SetMinTolerance (const Standard_Real mintol)
 Sets minimal allowed tolerance. More...
 
Standard_Real MinTolerance () const
 Returns minimal allowed tolerance. More...
 
void SetMaxTolerance (const Standard_Real maxtol)
 Sets maximal allowed tolerance. More...
 
Standard_Real MaxTolerance () const
 Returns maximal allowed tolerance. More...
 
Standard_Real LimitTolerance (const Standard_Real toler) const
 Returns tolerance limited by [myMinTol,myMaxTol]. More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Protected Member Functions

void Clear ()
 Clear all sequences and temporary map;. More...
 

Protected Attributes

Standard_Integer myStatus
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 

Detailed Description

Removes all internal wires having area less than specified min area.

Constructor & Destructor Documentation

◆ ShapeUpgrade_RemoveInternalWires() [1/2]

ShapeUpgrade_RemoveInternalWires::ShapeUpgrade_RemoveInternalWires ( )

Creates empty constructor.

◆ ShapeUpgrade_RemoveInternalWires() [2/2]

ShapeUpgrade_RemoveInternalWires::ShapeUpgrade_RemoveInternalWires ( const TopoDS_Shape theShape)

Member Function Documentation

◆ Clear()

void ShapeUpgrade_RemoveInternalWires::Clear ( )
protected

Clear all sequences and temporary map;.

◆ GetResult()

TopoDS_Shape ShapeUpgrade_RemoveInternalWires::GetResult ( ) const

Get result shape.

◆ Init()

void ShapeUpgrade_RemoveInternalWires::Init ( const TopoDS_Shape theShape)

Initialize by a Shape.

◆ MinArea()

Standard_Real& ShapeUpgrade_RemoveInternalWires::MinArea ( )

Set min area allowed for holes( all holes having area less than mi area will be removed)

◆ Perform() [1/2]

Standard_Boolean ShapeUpgrade_RemoveInternalWires::Perform ( )

Removes all internal wires having area less than area specified as minimal allowed area.

◆ Perform() [2/2]

Standard_Boolean ShapeUpgrade_RemoveInternalWires::Perform ( const TopTools_SequenceOfShape theSeqShapes)

If specified sequence of shape contains - 1.wires then these wires will be removed if they have area less than allowed min area. 2.faces than internal wires from these faces will be removed if they have area less than allowed min area.

◆ RemovedFaces()

const TopTools_SequenceOfShape& ShapeUpgrade_RemoveInternalWires::RemovedFaces ( ) const

Returns sequence of removed faces.

◆ RemovedWires()

const TopTools_SequenceOfShape& ShapeUpgrade_RemoveInternalWires::RemovedWires ( ) const

Returns sequence of removed faces.

◆ RemoveFaceMode()

Standard_Boolean& ShapeUpgrade_RemoveInternalWires::RemoveFaceMode ( )

Set mode which manage removing faces which have outer wires consisting only from edges belonginig to removed internal wires. By default it is equal to true.

◆ Status()

Standard_Boolean ShapeUpgrade_RemoveInternalWires::Status ( const ShapeExtend_Status  theStatus) const

Queries status of last call to Perform() : OK - nothing was done :DONE1 - internal wires were removed :DONE2 - small faces were removed. :FAIL1 - initial shape is not specified :FAIL2 - specified sub-shape is not belonged to inotial shape.

Field Documentation

◆ myStatus

Standard_Integer ShapeUpgrade_RemoveInternalWires::myStatus
protected

The documentation for this class was generated from the following file: