Open CASCADE Technology  7.5.0
Public Member Functions | Static Public Member Functions | Protected Member Functions | Protected Attributes
BRepFeat_RibSlot Class Reference

Provides functions to build mechanical features. Mechanical features include ribs - protrusions and grooves (or slots) - depressions along planar (linear) surfaces or revolution surfaces. The semantics of mechanical features is built around giving thickness to a contour. This thickness can either be unilateral - on one side of the contour - or bilateral - on both sides. As in the semantics of form features, the thickness is defined by construction of shapes in specific contexts. The development contexts differ, however,in case of mechanical features. Here they include extrusion: More...

#include <BRepFeat_RibSlot.hxx>

Inheritance diagram for BRepFeat_RibSlot:
Inheritance graph
[legend]

Public Member Functions

virtual Standard_Boolean IsDeleted (const TopoDS_Shape &F) override
 Returns true if F a TopoDS_Shape of type edge or face has been deleted. More...
 
virtual const TopTools_ListOfShapeModified (const TopoDS_Shape &F) override
 Returns the list of generated Faces F. This list may be empty. More...
 
virtual const TopTools_ListOfShapeGenerated (const TopoDS_Shape &S) override
 Returns a list TopTools_ListOfShape of the faces S created in the shape. More...
 
const TopTools_ListOfShapeFirstShape () const
 Returns the list of shapes created at the bottom of the created form. It may be an empty list. More...
 
const TopTools_ListOfShapeLastShape () const
 Returns the list of shapes created at the top of the created form. It may be an empty list. More...
 
const TopTools_ListOfShapeFacesForDraft () const
 Returns a list of the limiting and glueing faces generated by the feature. These faces did not originally exist in the basis shape. The list provides the information necessary for subsequent addition of a draft to a face. It may be an empty list. If a face has tangent edges, no draft is possible, and the tangent edges must subsequently be removed if you want to add a draft to the face. More...
 
const TopTools_ListOfShapeNewEdges () const
 Returns a list of the limiting and glueing edges generated by the feature. These edges did not originally exist in the basis shape. The list provides the information necessary for subsequent addition of fillets. It may be an empty list. More...
 
const TopTools_ListOfShapeTgtEdges () const
 Returns a list of the tangent edges among the limiting and glueing edges generated by the feature. These edges did not originally exist in the basis shape and are tangent to the face against which the feature is built. The list provides the information necessary for subsequent addition of fillets. It may be an empty list. If an edge is tangent, no fillet is possible, and the edge must subsequently be removed if you want to add a fillet. More...
 
BRepFeat_StatusError CurrentStatusError () const
 
- Public Member Functions inherited from BRepBuilderAPI_MakeShape
virtual void Build ()
 This is called by Shape(). It does nothing but may be redefined. More...
 
virtual const TopoDS_ShapeShape ()
 Returns a shape built by the shape construction algorithm. Raises exception StdFail_NotDone if the shape was not built. More...
 
 operator TopoDS_Shape ()
 
- Public Member Functions inherited from BRepBuilderAPI_Command
virtual ~BRepBuilderAPI_Command ()
 
virtual Standard_Boolean IsDone () const
 
void Check () const
 Raises NotDone if done is false. More...
 

Static Public Member Functions

static Standard_Real IntPar (const Handle< Geom_Curve > &C, const gp_Pnt &P)
 
static TopoDS_Face ChoiceOfFaces (TopTools_ListOfShape &faces, const Handle< Geom_Curve > &cc, const Standard_Real par, const Standard_Real bnd, const Handle< Geom_Plane > &Pln)
 

Protected Member Functions

 BRepFeat_RibSlot ()
 Redefines the empty constructor. More...
 
void LFPerform ()
 General perform method... More...
 
gp_Pnt CheckPoint (const TopoDS_Edge &e, const Standard_Real bnd, const Handle< Geom_Plane > &Pln)
 
gp_Dir Normal (const TopoDS_Face &F, const gp_Pnt &P)
 
void EdgeExtention (TopoDS_Edge &e, const Standard_Real bnd, const Standard_Boolean FirstLast)
 
Standard_Real HeightMax (const TopoDS_Shape &theSbase, const TopoDS_Shape &theSUntil, gp_Pnt &p1, gp_Pnt &p2)
 
Standard_Boolean ExtremeFaces (const Standard_Boolean RevolRib, const Standard_Real bnd, const Handle< Geom_Plane > &Pln, TopoDS_Edge &FirstEdge, TopoDS_Edge &LastEdge, TopoDS_Face &FirstFace, TopoDS_Face &LastFace, TopoDS_Vertex &FirstVertex, TopoDS_Vertex &LastVertex, Standard_Boolean &OnFirstFace, Standard_Boolean &OnLastFace, Standard_Boolean &PtOnFirstEdge, Standard_Boolean &PtOnLastEdge, TopoDS_Edge &OnFirstEdge, TopoDS_Edge &OnLastEdge)
 
void PtOnEdgeVertex (const Standard_Boolean RevolRib, const TopoDS_Shape &shape, const gp_Pnt &point, const TopoDS_Vertex &FirstVertex, const TopoDS_Vertex &LastVertex, Standard_Boolean &PtOnEdge, TopoDS_Edge &OnEdge, Standard_Boolean &PtOnVertex, TopoDS_Vertex &OnVertex)
 
Standard_Boolean SlidingProfile (TopoDS_Face &Prof, const Standard_Boolean RevolRib, const Standard_Real myTol, Standard_Integer &Concavite, const Handle< Geom_Plane > &myPln, const TopoDS_Face &BndFace, const gp_Pnt &CheckPnt, const TopoDS_Face &FirstFace, const TopoDS_Face &LastFace, const TopoDS_Vertex &FirstVertex, const TopoDS_Vertex &LastVertex, const TopoDS_Edge &FirstEdge, const TopoDS_Edge &LastEdge)
 
Standard_Boolean NoSlidingProfile (TopoDS_Face &Prof, const Standard_Boolean RevolRib, const Standard_Real myTol, Standard_Integer &Concavite, const Handle< Geom_Plane > &myPln, const Standard_Real bnd, const TopoDS_Face &BndFace, const gp_Pnt &CheckPnt, const TopoDS_Face &FirstFace, const TopoDS_Face &LastFace, const TopoDS_Vertex &FirstVertex, const TopoDS_Vertex &LastVertex, const TopoDS_Edge &FirstEdge, const TopoDS_Edge &LastEdge, const Standard_Boolean OnFirstFace, const Standard_Boolean OnLastFace)
 
void UpdateDescendants (const LocOpe_Gluer &G)
 Updates the data structures of descendant shapes during the glueing operation.Returns the modified, generated and deleted faces during the course of the glueing operation. More...
 
void UpdateDescendants (const BRepAlgoAPI_BooleanOperation &aBOP, const TopoDS_Shape &SResult, const Standard_Boolean SkipFace=Standard_False)
 
- Protected Member Functions inherited from BRepBuilderAPI_MakeShape
 BRepBuilderAPI_MakeShape ()
 
- Protected Member Functions inherited from BRepBuilderAPI_Command
 BRepBuilderAPI_Command ()
 Set done to False. More...
 
void Done ()
 Set done to true. More...
 
void NotDone ()
 Set done to false. More...
 

Protected Attributes

gp_Pnt myFirstPnt
 
gp_Pnt myLastPnt
 
Standard_Boolean myFuse
 
Standard_Boolean mySliding
 
TopTools_DataMapOfShapeListOfShape myMap
 
TopTools_DataMapOfShapeListOfShape myLFMap
 
TopoDS_Shape myFShape
 
TopoDS_Shape myLShape
 
BRepFeat_PerfSelection myPerfSelection
 
TopoDS_Wire myWire
 
TopoDS_Shape mySbase
 
TopoDS_Face mySkface
 
TopoDS_Face myPbase
 
TopoDS_Shape myGShape
 
TopoDS_Shape mySUntil
 
TopTools_DataMapOfShapeShape myGluedF
 
TopTools_ListOfShape myNewEdges
 
TopTools_ListOfShape myTgtEdges
 
TopTools_ListOfShape myFacesForDraft
 
BRepFeat_StatusError myStatusError
 
- Protected Attributes inherited from BRepBuilderAPI_MakeShape
TopoDS_Shape myShape
 
TopTools_ListOfShape myGenerated
 

Detailed Description

Provides functions to build mechanical features. Mechanical features include ribs - protrusions and grooves (or slots) - depressions along planar (linear) surfaces or revolution surfaces. The semantics of mechanical features is built around giving thickness to a contour. This thickness can either be unilateral - on one side of the contour - or bilateral - on both sides. As in the semantics of form features, the thickness is defined by construction of shapes in specific contexts. The development contexts differ, however,in case of mechanical features. Here they include extrusion:

Constructor & Destructor Documentation

◆ BRepFeat_RibSlot()

BRepFeat_RibSlot::BRepFeat_RibSlot ( )
protected

Redefines the empty constructor.

Member Function Documentation

◆ CheckPoint()

gp_Pnt BRepFeat_RibSlot::CheckPoint ( const TopoDS_Edge e,
const Standard_Real  bnd,
const Handle< Geom_Plane > &  Pln 
)
protected

◆ ChoiceOfFaces()

static TopoDS_Face BRepFeat_RibSlot::ChoiceOfFaces ( TopTools_ListOfShape faces,
const Handle< Geom_Curve > &  cc,
const Standard_Real  par,
const Standard_Real  bnd,
const Handle< Geom_Plane > &  Pln 
)
static

◆ CurrentStatusError()

BRepFeat_StatusError BRepFeat_RibSlot::CurrentStatusError ( ) const

◆ EdgeExtention()

void BRepFeat_RibSlot::EdgeExtention ( TopoDS_Edge e,
const Standard_Real  bnd,
const Standard_Boolean  FirstLast 
)
protected

◆ ExtremeFaces()

Standard_Boolean BRepFeat_RibSlot::ExtremeFaces ( const Standard_Boolean  RevolRib,
const Standard_Real  bnd,
const Handle< Geom_Plane > &  Pln,
TopoDS_Edge FirstEdge,
TopoDS_Edge LastEdge,
TopoDS_Face FirstFace,
TopoDS_Face LastFace,
TopoDS_Vertex FirstVertex,
TopoDS_Vertex LastVertex,
Standard_Boolean OnFirstFace,
Standard_Boolean OnLastFace,
Standard_Boolean PtOnFirstEdge,
Standard_Boolean PtOnLastEdge,
TopoDS_Edge OnFirstEdge,
TopoDS_Edge OnLastEdge 
)
protected

◆ FacesForDraft()

const TopTools_ListOfShape& BRepFeat_RibSlot::FacesForDraft ( ) const

Returns a list of the limiting and glueing faces generated by the feature. These faces did not originally exist in the basis shape. The list provides the information necessary for subsequent addition of a draft to a face. It may be an empty list. If a face has tangent edges, no draft is possible, and the tangent edges must subsequently be removed if you want to add a draft to the face.

◆ FirstShape()

const TopTools_ListOfShape& BRepFeat_RibSlot::FirstShape ( ) const

Returns the list of shapes created at the bottom of the created form. It may be an empty list.

◆ Generated()

virtual const TopTools_ListOfShape& BRepFeat_RibSlot::Generated ( const TopoDS_Shape S)
overridevirtual

Returns a list TopTools_ListOfShape of the faces S created in the shape.

Reimplemented from BRepBuilderAPI_MakeShape.

◆ HeightMax()

Standard_Real BRepFeat_RibSlot::HeightMax ( const TopoDS_Shape theSbase,
const TopoDS_Shape theSUntil,
gp_Pnt p1,
gp_Pnt p2 
)
protected

◆ IntPar()

static Standard_Real BRepFeat_RibSlot::IntPar ( const Handle< Geom_Curve > &  C,
const gp_Pnt P 
)
static

◆ IsDeleted()

virtual Standard_Boolean BRepFeat_RibSlot::IsDeleted ( const TopoDS_Shape F)
overridevirtual

Returns true if F a TopoDS_Shape of type edge or face has been deleted.

Reimplemented from BRepBuilderAPI_MakeShape.

◆ LastShape()

const TopTools_ListOfShape& BRepFeat_RibSlot::LastShape ( ) const

Returns the list of shapes created at the top of the created form. It may be an empty list.

◆ LFPerform()

void BRepFeat_RibSlot::LFPerform ( )
protected

General perform method...

◆ Modified()

virtual const TopTools_ListOfShape& BRepFeat_RibSlot::Modified ( const TopoDS_Shape F)
overridevirtual

Returns the list of generated Faces F. This list may be empty.

Reimplemented from BRepBuilderAPI_MakeShape.

◆ NewEdges()

const TopTools_ListOfShape& BRepFeat_RibSlot::NewEdges ( ) const

Returns a list of the limiting and glueing edges generated by the feature. These edges did not originally exist in the basis shape. The list provides the information necessary for subsequent addition of fillets. It may be an empty list.

◆ Normal()

gp_Dir BRepFeat_RibSlot::Normal ( const TopoDS_Face F,
const gp_Pnt P 
)
protected

◆ NoSlidingProfile()

Standard_Boolean BRepFeat_RibSlot::NoSlidingProfile ( TopoDS_Face Prof,
const Standard_Boolean  RevolRib,
const Standard_Real  myTol,
Standard_Integer Concavite,
const Handle< Geom_Plane > &  myPln,
const Standard_Real  bnd,
const TopoDS_Face BndFace,
const gp_Pnt CheckPnt,
const TopoDS_Face FirstFace,
const TopoDS_Face LastFace,
const TopoDS_Vertex FirstVertex,
const TopoDS_Vertex LastVertex,
const TopoDS_Edge FirstEdge,
const TopoDS_Edge LastEdge,
const Standard_Boolean  OnFirstFace,
const Standard_Boolean  OnLastFace 
)
protected

◆ PtOnEdgeVertex()

void BRepFeat_RibSlot::PtOnEdgeVertex ( const Standard_Boolean  RevolRib,
const TopoDS_Shape shape,
const gp_Pnt point,
const TopoDS_Vertex FirstVertex,
const TopoDS_Vertex LastVertex,
Standard_Boolean PtOnEdge,
TopoDS_Edge OnEdge,
Standard_Boolean PtOnVertex,
TopoDS_Vertex OnVertex 
)
protected

◆ SlidingProfile()

Standard_Boolean BRepFeat_RibSlot::SlidingProfile ( TopoDS_Face Prof,
const Standard_Boolean  RevolRib,
const Standard_Real  myTol,
Standard_Integer Concavite,
const Handle< Geom_Plane > &  myPln,
const TopoDS_Face BndFace,
const gp_Pnt CheckPnt,
const TopoDS_Face FirstFace,
const TopoDS_Face LastFace,
const TopoDS_Vertex FirstVertex,
const TopoDS_Vertex LastVertex,
const TopoDS_Edge FirstEdge,
const TopoDS_Edge LastEdge 
)
protected

◆ TgtEdges()

const TopTools_ListOfShape& BRepFeat_RibSlot::TgtEdges ( ) const

Returns a list of the tangent edges among the limiting and glueing edges generated by the feature. These edges did not originally exist in the basis shape and are tangent to the face against which the feature is built. The list provides the information necessary for subsequent addition of fillets. It may be an empty list. If an edge is tangent, no fillet is possible, and the edge must subsequently be removed if you want to add a fillet.

◆ UpdateDescendants() [1/2]

void BRepFeat_RibSlot::UpdateDescendants ( const LocOpe_Gluer G)
protected

Updates the data structures of descendant shapes during the glueing operation.Returns the modified, generated and deleted faces during the course of the glueing operation.

◆ UpdateDescendants() [2/2]

void BRepFeat_RibSlot::UpdateDescendants ( const BRepAlgoAPI_BooleanOperation aBOP,
const TopoDS_Shape SResult,
const Standard_Boolean  SkipFace = Standard_False 
)
protected

Field Documentation

◆ myFacesForDraft

TopTools_ListOfShape BRepFeat_RibSlot::myFacesForDraft
protected

◆ myFirstPnt

gp_Pnt BRepFeat_RibSlot::myFirstPnt
protected

◆ myFShape

TopoDS_Shape BRepFeat_RibSlot::myFShape
protected

◆ myFuse

Standard_Boolean BRepFeat_RibSlot::myFuse
protected

◆ myGluedF

TopTools_DataMapOfShapeShape BRepFeat_RibSlot::myGluedF
protected

◆ myGShape

TopoDS_Shape BRepFeat_RibSlot::myGShape
protected

◆ myLastPnt

gp_Pnt BRepFeat_RibSlot::myLastPnt
protected

◆ myLFMap

TopTools_DataMapOfShapeListOfShape BRepFeat_RibSlot::myLFMap
protected

◆ myLShape

TopoDS_Shape BRepFeat_RibSlot::myLShape
protected

◆ myMap

TopTools_DataMapOfShapeListOfShape BRepFeat_RibSlot::myMap
protected

◆ myNewEdges

TopTools_ListOfShape BRepFeat_RibSlot::myNewEdges
protected

◆ myPbase

TopoDS_Face BRepFeat_RibSlot::myPbase
protected

◆ myPerfSelection

BRepFeat_PerfSelection BRepFeat_RibSlot::myPerfSelection
protected

◆ mySbase

TopoDS_Shape BRepFeat_RibSlot::mySbase
protected

◆ mySkface

TopoDS_Face BRepFeat_RibSlot::mySkface
protected

◆ mySliding

Standard_Boolean BRepFeat_RibSlot::mySliding
protected

◆ myStatusError

BRepFeat_StatusError BRepFeat_RibSlot::myStatusError
protected

◆ mySUntil

TopoDS_Shape BRepFeat_RibSlot::mySUntil
protected

◆ myTgtEdges

TopTools_ListOfShape BRepFeat_RibSlot::myTgtEdges
protected

◆ myWire

TopoDS_Wire BRepFeat_RibSlot::myWire
protected

The documentation for this class was generated from the following file: