Algorithm to build primitives with one axis of revolution. More...

#include <BRepPrim_OneAxis.hxx>

Inheritance diagram for BRepPrim_OneAxis:

[legend]

Public Member Functions
void	SetMeridianOffset (const Standard_Real MeridianOffset=0)
	The MeridianOffset is added to the parameters on the meridian curve and to the V values of the pcurves. This is used for the sphere for example, to give a range on the meridian edge which is not VMin, VMax. More...

const gp_Ax2 &	Axes () const
	Returns the Ax2 from <me>. More...

void	Axes (const gp_Ax2 &A)

Standard_Real	Angle () const

void	Angle (const Standard_Real A)

Standard_Real	VMin () const

void	VMin (const Standard_Real V)

Standard_Real	VMax () const

void	VMax (const Standard_Real V)

virtual TopoDS_Face	MakeEmptyLateralFace () const =0
	Returns a face with no edges. The surface is the lateral surface with normals pointing outward. The U parameter is the angle with the origin on the X axis. The V parameter is the parameter of the meridian. More...

virtual TopoDS_Edge	MakeEmptyMeridianEdge (const Standard_Real Ang) const =0
	Returns an edge with a 3D curve made from the meridian in the XZ plane rotated by <Ang> around the Z-axis. Ang may be 0 or myAngle. More...

virtual void	SetMeridianPCurve (TopoDS_Edge &E, const TopoDS_Face &F) const =0
	Sets the parametric curve of the edge <E> in the face <F> to be the 2d representation of the meridian. More...

virtual gp_Pnt2d	MeridianValue (const Standard_Real V) const =0
	Returns the meridian point at parameter <V> in the plane XZ. More...

virtual Standard_Boolean	MeridianOnAxis (const Standard_Real V) const
	Returns True if the point of parameter <V> on the meridian is on the Axis. Default implementation is Abs(MeridianValue(V).X()) < Precision::Confusion() More...

virtual Standard_Boolean	MeridianClosed () const
	Returns True if the meridian is closed. Default implementation is MeridianValue(VMin).IsEqual(MeridianValue(VMax), Precision::Confusion()) More...

virtual Standard_Boolean	VMaxInfinite () const
	Returns True if VMax is infinite. Default Precision::IsPositiveInfinite(VMax);. More...

virtual Standard_Boolean	VMinInfinite () const
	Returns True if VMin is infinite. Default Precision::IsNegativeInfinite(VMax);. More...

virtual Standard_Boolean	HasTop () const
	Returns True if there is a top face. More...

virtual Standard_Boolean	HasBottom () const
	Returns True if there is a bottom face. More...

virtual Standard_Boolean	HasSides () const
	Returns True if there are Start and End faces. More...

const TopoDS_Shell &	Shell ()
	Returns the Shell containing all the Faces of the primitive. More...

const TopoDS_Face &	LateralFace ()
	Returns the lateral Face. It is oriented toward the outside of the primitive. More...

const TopoDS_Face &	TopFace ()
	Returns the top planar Face. It is Oriented toward the +Z axis (outside). More...

const TopoDS_Face &	BottomFace ()
	Returns the Bottom planar Face. It is Oriented toward the -Z axis (outside). More...

const TopoDS_Face &	StartFace ()
	Returns the Face starting the slice, it is oriented toward the exterior of the primitive. More...

const TopoDS_Face &	EndFace ()
	Returns the Face ending the slice, it is oriented toward the exterior of the primitive. More...

const TopoDS_Wire &	LateralWire ()
	Returns the wire in the lateral face. More...

const TopoDS_Wire &	LateralStartWire ()
	Returns the wire in the lateral face with the start edge. More...

const TopoDS_Wire &	LateralEndWire ()
	Returns the wire with in lateral face with the end edge. More...

const TopoDS_Wire &	TopWire ()
	Returns the wire in the top face. More...

const TopoDS_Wire &	BottomWire ()
	Returns the wire in the bottom face. More...

const TopoDS_Wire &	StartWire ()
	Returns the wire in the start face. More...

const TopoDS_Wire &	AxisStartWire ()
	Returns the wire in the start face with the AxisEdge. More...

const TopoDS_Wire &	EndWire ()
	Returns the Wire in the end face. More...

const TopoDS_Wire &	AxisEndWire ()
	Returns the Wire in the end face with the AxisEdge. More...

const TopoDS_Edge &	AxisEdge ()
	Returns the Edge built along the Axis and oriented on +Z of the Axis. More...

const TopoDS_Edge &	StartEdge ()
	Returns the Edge at angle 0. More...

const TopoDS_Edge &	EndEdge ()
	Returns the Edge at angle Angle. If !HasSides() the StartEdge and the EndEdge are the same edge. More...

const TopoDS_Edge &	StartTopEdge ()
	Returns the linear Edge between start Face and top Face. More...

const TopoDS_Edge &	StartBottomEdge ()
	Returns the linear Edge between start Face and bottom Face. More...

const TopoDS_Edge &	EndTopEdge ()
	Returns the linear Edge between end Face and top Face. More...

const TopoDS_Edge &	EndBottomEdge ()
	Returns the linear Edge between end Face and bottom Face. More...

const TopoDS_Edge &	TopEdge ()
	Returns the edge at VMax. If MeridianClosed() the TopEdge and the BottomEdge are the same edge. More...

const TopoDS_Edge &	BottomEdge ()
	Returns the edge at VMin. If MeridianClosed() the TopEdge and the BottomEdge are the same edge. More...

const TopoDS_Vertex &	AxisTopVertex ()
	Returns the Vertex at the Top altitude on the axis. More...

const TopoDS_Vertex &	AxisBottomVertex ()
	Returns the Vertex at the Bottom altitude on the axis. More...

const TopoDS_Vertex &	TopStartVertex ()
	Returns the vertex (0,VMax) More...

const TopoDS_Vertex &	TopEndVertex ()
	Returns the vertex (angle,VMax) More...

const TopoDS_Vertex &	BottomStartVertex ()
	Returns the vertex (0,VMin) More...

const TopoDS_Vertex &	BottomEndVertex ()
	Returns the vertex (angle,VMax) More...

virtual	~BRepPrim_OneAxis ()

Protected Member Functions
	BRepPrim_OneAxis (const BRepPrim_Builder &B, const gp_Ax2 &A, const Standard_Real VMin, const Standard_Real VMax)
	Creates a OneAxis algorithm. *is used to build the Topology. The angle defaults to 2PI.** More...

Protected Attributes
BRepPrim_Builder	myBuilder

Detailed Description

Algorithm to build primitives with one axis of revolution.

The revolution body is described by :

A coordinate system (Ax2 from gp). The Z axis is the rotational axis.

An Angle around the Axis, When the Angle is 2*PI the primitive is not limited by planar faces. The U parameter range from 0 to Angle.

A parameter range VMin, VMax on the meridian.

A meridian : The meridian is a curve described by a set of deferred methods.

The topology consists of A shell, Faces, Wires, Edges and Vertices. Methods are provided to build all the elements. Building an element implies the automatic building of all its sub-elements.

So building the shell builds everything.

There are at most 5 faces :

The LateralFace.
The TopFace and the BottomFace.
The StartFace and the EndFace.

Constructor & Destructor Documentation

◆ ~BRepPrim_OneAxis()

virtual BRepPrim_OneAxis::~BRepPrim_OneAxis ( )

virtual

◆ BRepPrim_OneAxis()

BRepPrim_OneAxis::BRepPrim_OneAxis	(	const BRepPrim_Builder &	B,
		const gp_Ax2 &	A,
		const Standard_Real	VMin,
		const Standard_Real	VMax
	)

protected

Creates a OneAxis algorithm. is used to build the Topology. The angle defaults to 2*PI.

Member Function Documentation

◆ Angle() [1/2]

Standard_Real BRepPrim_OneAxis::Angle ( ) const

◆ Angle() [2/2]

void BRepPrim_OneAxis::Angle ( const Standard_Real A )

◆ Axes() [1/2]

const gp_Ax2& BRepPrim_OneAxis::Axes ( ) const

Returns the Ax2 from <me>.

◆ Axes() [2/2]

void BRepPrim_OneAxis::Axes ( const gp_Ax2 & A )

◆ AxisBottomVertex()

const TopoDS_Vertex& BRepPrim_OneAxis::AxisBottomVertex ( )

Returns the Vertex at the Bottom altitude on the axis.

◆ AxisEdge()

const TopoDS_Edge& BRepPrim_OneAxis::AxisEdge ( )

Returns the Edge built along the Axis and oriented on +Z of the Axis.

◆ AxisEndWire()

const TopoDS_Wire& BRepPrim_OneAxis::AxisEndWire ( )

Returns the Wire in the end face with the AxisEdge.

◆ AxisStartWire()

const TopoDS_Wire& BRepPrim_OneAxis::AxisStartWire ( )

Returns the wire in the start face with the AxisEdge.

◆ AxisTopVertex()

const TopoDS_Vertex& BRepPrim_OneAxis::AxisTopVertex ( )

Returns the Vertex at the Top altitude on the axis.

◆ BottomEdge()

const TopoDS_Edge& BRepPrim_OneAxis::BottomEdge ( )

Returns the edge at VMin. If MeridianClosed() the TopEdge and the BottomEdge are the same edge.

◆ BottomEndVertex()

const TopoDS_Vertex& BRepPrim_OneAxis::BottomEndVertex ( )

Returns the vertex (angle,VMax)

◆ BottomFace()

const TopoDS_Face& BRepPrim_OneAxis::BottomFace ( )

Returns the Bottom planar Face. It is Oriented toward the -Z axis (outside).

◆ BottomStartVertex()

const TopoDS_Vertex& BRepPrim_OneAxis::BottomStartVertex ( )

Returns the vertex (0,VMin)

◆ BottomWire()

const TopoDS_Wire& BRepPrim_OneAxis::BottomWire ( )

Returns the wire in the bottom face.

◆ EndBottomEdge()

const TopoDS_Edge& BRepPrim_OneAxis::EndBottomEdge ( )

Returns the linear Edge between end Face and bottom Face.

◆ EndEdge()

const TopoDS_Edge& BRepPrim_OneAxis::EndEdge ( )

Returns the Edge at angle Angle. If !HasSides() the StartEdge and the EndEdge are the same edge.

◆ EndFace()

const TopoDS_Face& BRepPrim_OneAxis::EndFace ( )

Returns the Face ending the slice, it is oriented toward the exterior of the primitive.

◆ EndTopEdge()

const TopoDS_Edge& BRepPrim_OneAxis::EndTopEdge ( )

Returns the linear Edge between end Face and top Face.

◆ EndWire()

const TopoDS_Wire& BRepPrim_OneAxis::EndWire ( )

Returns the Wire in the end face.

◆ HasBottom()

virtual Standard_Boolean BRepPrim_OneAxis::HasBottom ( ) const

virtual

Returns True if there is a bottom face.

That is neither : VMinInfinite() MeridianClosed() MeridianOnAxis(VMin)

◆ HasSides()

virtual Standard_Boolean BRepPrim_OneAxis::HasSides ( ) const

virtual

Returns True if there are Start and End faces.

That is : 2*PI - Angle > Precision::Angular()

◆ HasTop()

virtual Standard_Boolean BRepPrim_OneAxis::HasTop ( ) const

virtual

Returns True if there is a top face.

That is neither : VMaxInfinite() MeridianClosed() MeridianOnAxis(VMax)

◆ LateralEndWire()

const TopoDS_Wire& BRepPrim_OneAxis::LateralEndWire ( )

Returns the wire with in lateral face with the end edge.

◆ LateralFace()

const TopoDS_Face& BRepPrim_OneAxis::LateralFace ( )

Returns the lateral Face. It is oriented toward the outside of the primitive.

◆ LateralStartWire()

const TopoDS_Wire& BRepPrim_OneAxis::LateralStartWire ( )

Returns the wire in the lateral face with the start edge.

◆ LateralWire()

const TopoDS_Wire& BRepPrim_OneAxis::LateralWire ( )

Returns the wire in the lateral face.

◆ MakeEmptyLateralFace()

virtual TopoDS_Face BRepPrim_OneAxis::MakeEmptyLateralFace ( ) const

pure virtual

Returns a face with no edges. The surface is the lateral surface with normals pointing outward. The U parameter is the angle with the origin on the X axis. The V parameter is the parameter of the meridian.

Implemented in BRepPrim_Cone, BRepPrim_Cylinder, BRepPrim_Torus, BRepPrim_Sphere, and BRepPrim_Revolution.

◆ MakeEmptyMeridianEdge()

virtual TopoDS_Edge BRepPrim_OneAxis::MakeEmptyMeridianEdge ( const Standard_Real Ang ) const

pure virtual

Returns an edge with a 3D curve made from the meridian in the XZ plane rotated by <Ang> around the Z-axis. Ang may be 0 or myAngle.

Implemented in BRepPrim_Revolution.

◆ MeridianClosed()

virtual Standard_Boolean BRepPrim_OneAxis::MeridianClosed ( ) const

virtual

Returns True if the meridian is closed. Default implementation is MeridianValue(VMin).IsEqual(MeridianValue(VMax), Precision::Confusion())

◆ MeridianOnAxis()

virtual Standard_Boolean BRepPrim_OneAxis::MeridianOnAxis ( const Standard_Real V ) const

virtual

Returns True if the point of parameter <V> on the meridian is on the Axis. Default implementation is Abs(MeridianValue(V).X()) < Precision::Confusion()

◆ MeridianValue()

virtual gp_Pnt2d BRepPrim_OneAxis::MeridianValue ( const Standard_Real V ) const

pure virtual

Returns the meridian point at parameter <V> in the plane XZ.

Implemented in BRepPrim_Revolution.

◆ SetMeridianOffset()

void BRepPrim_OneAxis::SetMeridianOffset ( const Standard_Real MeridianOffset = 0 )

The MeridianOffset is added to the parameters on the meridian curve and to the V values of the pcurves. This is used for the sphere for example, to give a range on the meridian edge which is not VMin, VMax.

◆ SetMeridianPCurve()

virtual void BRepPrim_OneAxis::SetMeridianPCurve	(	TopoDS_Edge &	E,
		const TopoDS_Face &	F
	)		const

pure virtual

Sets the parametric curve of the edge <E> in the face <F> to be the 2d representation of the meridian.

Implemented in BRepPrim_Revolution.

◆ Shell()

const TopoDS_Shell& BRepPrim_OneAxis::Shell ( )

Returns the Shell containing all the Faces of the primitive.

◆ StartBottomEdge()

const TopoDS_Edge& BRepPrim_OneAxis::StartBottomEdge ( )

Returns the linear Edge between start Face and bottom Face.

◆ StartEdge()

const TopoDS_Edge& BRepPrim_OneAxis::StartEdge ( )

Returns the Edge at angle 0.

◆ StartFace()

const TopoDS_Face& BRepPrim_OneAxis::StartFace ( )

Returns the Face starting the slice, it is oriented toward the exterior of the primitive.

◆ StartTopEdge()

const TopoDS_Edge& BRepPrim_OneAxis::StartTopEdge ( )

Returns the linear Edge between start Face and top Face.

◆ StartWire()

const TopoDS_Wire& BRepPrim_OneAxis::StartWire ( )

Returns the wire in the start face.

◆ TopEdge()

const TopoDS_Edge& BRepPrim_OneAxis::TopEdge ( )

Returns the edge at VMax. If MeridianClosed() the TopEdge and the BottomEdge are the same edge.

◆ TopEndVertex()

const TopoDS_Vertex& BRepPrim_OneAxis::TopEndVertex ( )

Returns the vertex (angle,VMax)

◆ TopFace()

const TopoDS_Face& BRepPrim_OneAxis::TopFace ( )

Returns the top planar Face. It is Oriented toward the +Z axis (outside).

◆ TopStartVertex()

const TopoDS_Vertex& BRepPrim_OneAxis::TopStartVertex ( )

Returns the vertex (0,VMax)

◆ TopWire()

const TopoDS_Wire& BRepPrim_OneAxis::TopWire ( )

Returns the wire in the top face.

◆ VMax() [1/2]

Standard_Real BRepPrim_OneAxis::VMax ( ) const

◆ VMax() [2/2]

void BRepPrim_OneAxis::VMax ( const Standard_Real V )

◆ VMaxInfinite()

virtual Standard_Boolean BRepPrim_OneAxis::VMaxInfinite ( ) const

virtual

Returns True if VMax is infinite. Default Precision::IsPositiveInfinite(VMax);.

◆ VMin() [1/2]

Standard_Real BRepPrim_OneAxis::VMin ( ) const

◆ VMin() [2/2]

void BRepPrim_OneAxis::VMin ( const Standard_Real V )

◆ VMinInfinite()

virtual Standard_Boolean BRepPrim_OneAxis::VMinInfinite ( ) const

virtual

Returns True if VMin is infinite. Default Precision::IsNegativeInfinite(VMax);.

Field Documentation

◆ myBuilder

BRepPrim_Builder BRepPrim_OneAxis::myBuilder

protected

The documentation for this class was generated from the following file:

BRepPrim_OneAxis.hxx

Public Member Functions

Protected Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

◆ ~BRepPrim_OneAxis()

◆ BRepPrim_OneAxis()

Member Function Documentation

◆ Angle() [1/2]

◆ Angle() [2/2]

◆ Axes() [1/2]

◆ Axes() [2/2]

◆ AxisBottomVertex()

◆ AxisEdge()

◆ AxisEndWire()

◆ AxisStartWire()

◆ AxisTopVertex()

◆ BottomEdge()

◆ BottomEndVertex()

◆ BottomFace()

◆ BottomStartVertex()

◆ BottomWire()

◆ EndBottomEdge()

◆ EndEdge()

◆ EndFace()

◆ EndTopEdge()

◆ EndWire()

◆ HasBottom()

◆ HasSides()

◆ HasTop()

◆ LateralEndWire()

◆ LateralFace()

◆ LateralStartWire()

◆ LateralWire()

◆ MakeEmptyLateralFace()

◆ MakeEmptyMeridianEdge()

◆ MeridianClosed()

◆ MeridianOnAxis()

◆ MeridianValue()

◆ SetMeridianOffset()

◆ SetMeridianPCurve()

◆ Shell()

◆ StartBottomEdge()

◆ StartEdge()

◆ StartFace()

◆ StartTopEdge()

◆ StartWire()

◆ TopEdge()

◆ TopEndVertex()

◆ TopFace()

◆ TopStartVertex()

◆ TopWire()

◆ VMax() [1/2]

◆ VMax() [2/2]

◆ VMaxInfinite()

◆ VMin() [1/2]

◆ VMin() [2/2]

◆ VMinInfinite()

Field Documentation

◆ myBuilder