Open CASCADE Technology  7.5.0
Public Member Functions
BRepTools_Modification Class Referenceabstract

Defines geometric modifications to a shape, i.e. changes to faces, edges and vertices. More...

#include <BRepTools_Modification.hxx>

Inheritance diagram for BRepTools_Modification:
Inheritance graph
[legend]

Public Member Functions

virtual Standard_Boolean NewSurface (const TopoDS_Face &F, Handle< Geom_Surface > &S, TopLoc_Location &L, Standard_Real &Tol, Standard_Boolean &RevWires, Standard_Boolean &RevFace)=0
 Returns true if the face, F, has been modified. If the face has been modified: More...
 
virtual Standard_Boolean NewTriangulation (const TopoDS_Face &F, Handle< Poly_Triangulation > &T)
 Returns true if the face has been modified according to changed triangulation. If the face has been modified: More...
 
virtual Standard_Boolean NewCurve (const TopoDS_Edge &E, Handle< Geom_Curve > &C, TopLoc_Location &L, Standard_Real &Tol)=0
 Returns true if the edge, E, has been modified. If the edge has been modified: More...
 
virtual Standard_Boolean NewPolygon (const TopoDS_Edge &E, Handle< Poly_Polygon3D > &P)
 Returns true if the edge has been modified according to changed polygon. If the edge has been modified: More...
 
virtual Standard_Boolean NewPolygonOnTriangulation (const TopoDS_Edge &E, const TopoDS_Face &F, Handle< Poly_PolygonOnTriangulation > &P)
 Returns true if the edge has been modified according to changed polygon on triangulation. If the edge has been modified: More...
 
virtual Standard_Boolean NewPoint (const TopoDS_Vertex &V, gp_Pnt &P, Standard_Real &Tol)=0
 Returns true if the vertex V has been modified. If V has been modified: More...
 
virtual Standard_Boolean NewCurve2d (const TopoDS_Edge &E, const TopoDS_Face &F, const TopoDS_Edge &NewE, const TopoDS_Face &NewF, Handle< Geom2d_Curve > &C, Standard_Real &Tol)=0
 Returns true if the edge, E, has a new curve on surface on the face, F. If a new curve exists: More...
 
virtual Standard_Boolean NewParameter (const TopoDS_Vertex &V, const TopoDS_Edge &E, Standard_Real &P, Standard_Real &Tol)=0
 Returns true if the vertex V has a new parameter on the edge E. If a new parameter exists: More...
 
virtual GeomAbs_Shape Continuity (const TopoDS_Edge &E, const TopoDS_Face &F1, const TopoDS_Face &F2, const TopoDS_Edge &NewE, const TopoDS_Face &NewF1, const TopoDS_Face &NewF2)=0
 Returns the continuity of <NewE> between <NewF1> and <NewF2>. <NewE> is the new edge created from <E>. <NewF1> (resp. <NewF2>) is the new face created from <F1> (resp. <F2>). More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 

Detailed Description

Defines geometric modifications to a shape, i.e. changes to faces, edges and vertices.

Member Function Documentation

◆ Continuity()

virtual GeomAbs_Shape BRepTools_Modification::Continuity ( const TopoDS_Edge E,
const TopoDS_Face F1,
const TopoDS_Face F2,
const TopoDS_Edge NewE,
const TopoDS_Face NewF1,
const TopoDS_Face NewF2 
)
pure virtual

Returns the continuity of <NewE> between <NewF1> and <NewF2>. <NewE> is the new edge created from <E>. <NewF1> (resp. <NewF2>) is the new face created from <F1> (resp. <F2>).

Implemented in ShapeCustom_BSplineRestriction, Draft_Modification, BRepOffset_SimpleOffset, ShapeCustom_ConvertToBSpline, BRepTools_TrsfModification, BRepTools_GTrsfModification, BRepTools_NurbsConvertModification, ShapeCustom_ConvertToRevolution, ShapeCustom_DirectModification, and ShapeCustom_SweptToElementary.

◆ NewCurve()

virtual Standard_Boolean BRepTools_Modification::NewCurve ( const TopoDS_Edge E,
Handle< Geom_Curve > &  C,
TopLoc_Location L,
Standard_Real Tol 
)
pure virtual

Returns true if the edge, E, has been modified. If the edge has been modified:

  • C is the new geometry associated with the edge,
  • L is its new location, and
  • Tol is the new tolerance. If the edge has not been modified, this function returns false, and the values of C, L and Tol are not significant.

Implemented in Draft_Modification, ShapeCustom_BSplineRestriction, BRepOffset_SimpleOffset, ShapeCustom_ConvertToBSpline, BRepTools_TrsfModification, BRepTools_GTrsfModification, BRepTools_NurbsConvertModification, ShapeCustom_ConvertToRevolution, ShapeCustom_DirectModification, ShapeCustom_SweptToElementary, and ShapeCustom_TrsfModification.

◆ NewCurve2d()

virtual Standard_Boolean BRepTools_Modification::NewCurve2d ( const TopoDS_Edge E,
const TopoDS_Face F,
const TopoDS_Edge NewE,
const TopoDS_Face NewF,
Handle< Geom2d_Curve > &  C,
Standard_Real Tol 
)
pure virtual

Returns true if the edge, E, has a new curve on surface on the face, F. If a new curve exists:

  • C is the new geometry of the edge,
  • L is the new location, and
  • Tol is the new tolerance. NewE is the new edge created from E, and NewF is the new face created from F. If there is no new curve on the face, this function returns false, and the values of C, L and Tol are not significant.

Implemented in Draft_Modification, BRepOffset_SimpleOffset, ShapeCustom_ConvertToBSpline, ShapeCustom_BSplineRestriction, BRepTools_TrsfModification, BRepTools_GTrsfModification, BRepTools_NurbsConvertModification, ShapeCustom_ConvertToRevolution, ShapeCustom_DirectModification, ShapeCustom_SweptToElementary, and ShapeCustom_TrsfModification.

◆ NewParameter()

virtual Standard_Boolean BRepTools_Modification::NewParameter ( const TopoDS_Vertex V,
const TopoDS_Edge E,
Standard_Real P,
Standard_Real Tol 
)
pure virtual

Returns true if the vertex V has a new parameter on the edge E. If a new parameter exists:

  • P is the parameter, and
  • Tol is the new tolerance. If there is no new parameter this function returns false, and the values of P and Tol are not significant.

Implemented in ShapeCustom_BSplineRestriction, Draft_Modification, BRepOffset_SimpleOffset, ShapeCustom_ConvertToBSpline, BRepTools_TrsfModification, BRepTools_GTrsfModification, BRepTools_NurbsConvertModification, ShapeCustom_ConvertToRevolution, ShapeCustom_DirectModification, ShapeCustom_SweptToElementary, and ShapeCustom_TrsfModification.

◆ NewPoint()

virtual Standard_Boolean BRepTools_Modification::NewPoint ( const TopoDS_Vertex V,
gp_Pnt P,
Standard_Real Tol 
)
pure virtual

Returns true if the vertex V has been modified. If V has been modified:

  • P is the new geometry of the vertex, and
  • Tol is the new tolerance. If the vertex has not been modified this function returns false, and the values of P and Tol are not significant.

Implemented in ShapeCustom_BSplineRestriction, Draft_Modification, BRepOffset_SimpleOffset, ShapeCustom_ConvertToBSpline, BRepTools_TrsfModification, BRepTools_GTrsfModification, BRepTools_NurbsConvertModification, ShapeCustom_ConvertToRevolution, ShapeCustom_DirectModification, ShapeCustom_SweptToElementary, and ShapeCustom_TrsfModification.

◆ NewPolygon()

virtual Standard_Boolean BRepTools_Modification::NewPolygon ( const TopoDS_Edge E,
Handle< Poly_Polygon3D > &  P 
)
virtual

Returns true if the edge has been modified according to changed polygon. If the edge has been modified:

  • P is a new polygon

◆ NewPolygonOnTriangulation()

virtual Standard_Boolean BRepTools_Modification::NewPolygonOnTriangulation ( const TopoDS_Edge E,
const TopoDS_Face F,
Handle< Poly_PolygonOnTriangulation > &  P 
)
virtual

Returns true if the edge has been modified according to changed polygon on triangulation. If the edge has been modified:

  • P is a new polygon on triangulation

◆ NewSurface()

virtual Standard_Boolean BRepTools_Modification::NewSurface ( const TopoDS_Face F,
Handle< Geom_Surface > &  S,
TopLoc_Location L,
Standard_Real Tol,
Standard_Boolean RevWires,
Standard_Boolean RevFace 
)
pure virtual

Returns true if the face, F, has been modified. If the face has been modified:

  • S is the new geometry of the face,
  • L is its new location, and
  • Tol is the new tolerance. The flag, RevWires, is set to true when the modification reverses the normal of the surface, (i.e. the wires have to be reversed). The flag, RevFace, is set to true if the orientation of the modified face changes in the shells which contain it. If the face has not been modified this function returns false, and the values of S, L, Tol, RevWires and RevFace are not significant.

Implemented in Draft_Modification, ShapeCustom_BSplineRestriction, ShapeCustom_ConvertToBSpline, BRepTools_TrsfModification, BRepOffset_SimpleOffset, BRepTools_GTrsfModification, BRepTools_NurbsConvertModification, ShapeCustom_ConvertToRevolution, ShapeCustom_DirectModification, ShapeCustom_TrsfModification, and ShapeCustom_SweptToElementary.

◆ NewTriangulation()

virtual Standard_Boolean BRepTools_Modification::NewTriangulation ( const TopoDS_Face F,
Handle< Poly_Triangulation > &  T 
)
virtual

Returns true if the face has been modified according to changed triangulation. If the face has been modified:

  • T is a new triangulation on the face

The documentation for this class was generated from the following file: