The general interface for importing mesh data into XDE document. More...

#include <RWMesh_CafReader.hxx>

Inheritance diagram for RWMesh_CafReader:

Data Structures
struct	CafDocumentTools
	Structure holding tools for filling the document. More...

Public Member Functions
	RWMesh_CafReader ()
	Empty constructor. More...

virtual	~RWMesh_CafReader ()
	Destructor. More...

const Handle< TDocStd_Document > &	Document () const
	Return target document. More...

void	SetDocument (const Handle< TDocStd_Document > &theDoc)
	Set target document. More...

const TCollection_AsciiString &	RootPrefix () const
	Return prefix for generating root labels names. More...

void	SetRootPrefix (const TCollection_AsciiString &theRootPrefix)
	Set prefix for generating root labels names. More...

Standard_Boolean	ToFillIncompleteDocument () const
	Flag indicating if partially read file content should be put into the XDE document, TRUE by default. More...

void	SetFillIncompleteDocument (Standard_Boolean theToFillIncomplete)
	Set flag allowing partially read file content to be put into the XDE document. More...

Standard_Integer	MemoryLimitMiB () const
	Return memory usage limit in MiB, -1 by default which means no limit. More...

void	SetMemoryLimitMiB (Standard_Integer theLimitMiB)
	Set memory usage limit in MiB; can be ignored by reader implementation! More...

const RWMesh_CoordinateSystemConverter &	CoordinateSystemConverter () const
	Return coordinate system converter. More...

void	SetCoordinateSystemConverter (const RWMesh_CoordinateSystemConverter &theConverter)
	Set coordinate system converter. More...

Standard_Real	SystemLengthUnit () const
	Return the length unit to convert into while reading the file, defined as scale factor for m (meters); -1.0 by default, which means that NO conversion will be applied. More...

void	SetSystemLengthUnit (Standard_Real theUnits)
	Set system length units to convert into while reading the file, defined as scale factor for m (meters). More...

Standard_Boolean	HasSystemCoordinateSystem () const
	Return TRUE if system coordinate system has been defined; FALSE by default. More...

const gp_Ax3 &	SystemCoordinateSystem () const
	Return system coordinate system; UNDEFINED by default, which means that no conversion will be done. More...

void	SetSystemCoordinateSystem (const gp_Ax3 &theCS)
	Set system origin coordinate system to perform conversion into during read. More...

void	SetSystemCoordinateSystem (RWMesh_CoordinateSystem theCS)
	Set system origin coordinate system to perform conversion into during read. More...

Standard_Real	FileLengthUnit () const
	Return the length unit to convert from while reading the file, defined as scale factor for m (meters). Can be undefined (-1.0) if file format is unitless. More...

void	SetFileLengthUnit (Standard_Real theUnits)
	Set (override) file length units to convert from while reading the file, defined as scale factor for m (meters). More...

Standard_Boolean	HasFileCoordinateSystem () const
	Return TRUE if file origin coordinate system has been defined. More...

const gp_Ax3 &	FileCoordinateSystem () const
	Return file origin coordinate system; can be UNDEFINED, which means no conversion will be done. More...

void	SetFileCoordinateSystem (const gp_Ax3 &theCS)
	Set (override) file origin coordinate system to perform conversion during read. More...

void	SetFileCoordinateSystem (RWMesh_CoordinateSystem theCS)
	Set (override) file origin coordinate system to perform conversion during read. More...

bool	Perform (const TCollection_AsciiString &theFile, const Message_ProgressRange &theProgress)
	Read the data from specified file. The Document instance should be set beforehand. More...

Standard_Integer	ExtraStatus () const
	Return extended status flags. More...

TopoDS_Shape	SingleShape () const
	Return result as a single shape. More...

const NCollection_IndexedMap< TCollection_AsciiString > &	ExternalFiles () const
	Return the list of complementary files - external references (textures, data, etc.). More...

const TColStd_IndexedDataMapOfStringString &	Metadata () const
	Return metadata map. More...

Standard_Boolean	ProbeHeader (const TCollection_AsciiString &theFile, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Read the header data from specified file without reading entire model. The main purpose is collecting metadata and external references - for copying model into a new location, for example. Can be NOT implemented (unsupported by format / reader). More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Protected Member Functions
virtual Standard_Boolean	perform (const TCollection_AsciiString &theFile, const Message_ProgressRange &theProgress, const Standard_Boolean theToProbe)
	Read the data from specified file. Default implementation calls performMesh() and fills XDE document from collected shapes. More...

virtual Standard_Boolean	performMesh (const TCollection_AsciiString &theFile, const Message_ProgressRange &theProgress, const Standard_Boolean theToProbe)=0
	Read the mesh from specified file - interface to be implemented by sub-classes. More...

tools for filling XDE document
Handle< TDocStd_Document >	myXdeDoc
	target document More...

TColStd_IndexedDataMapOfStringString	myMetadata
	metadata map More...

NCollection_IndexedMap< TCollection_AsciiString >	myExternalFiles
	the list of complementary files - external references (textures, data, etc.) More...

TCollection_AsciiString	myRootPrefix
	root folder for generating root labels names More...

TopTools_SequenceOfShape	myRootShapes
	sequence of result root shapes More...

RWMesh_NodeAttributeMap	myAttribMap
	map of per-shape attributes More...

RWMesh_CoordinateSystemConverter	myCoordSysConverter
	coordinate system converter More...

Standard_Boolean	myToFillDoc
	fill document from shape sequence More...

Standard_Boolean	myToFillIncomplete
	fill the document with partially retrieved data even if reader has failed with error More...

Standard_Integer	myMemoryLimitMiB
	memory usage limit More...

Standard_Integer	myExtraStatus
	extra status bitmask More...

void	fillDocument ()
	Fill document with new root shapes. More...

Standard_Boolean	addShapeIntoDoc (CafDocumentTools &theTools, const TopoDS_Shape &theShape, const TDF_Label &theLabel, const TCollection_AsciiString &theParentName)
	Append new shape into the document (recursively). More...

Standard_Boolean	addSubShapeIntoDoc (CafDocumentTools &theTools, const TopoDS_Shape &theShape, const TDF_Label &theParentLabel, const RWMesh_NodeAttributes &theAttribs)
	Append new sub-shape into the document (recursively). More...

void	setShapeName (const TDF_Label &theLabel, const TopAbs_ShapeEnum theShapeType, const TCollection_AsciiString &theName, const TDF_Label &theParentLabel, const TCollection_AsciiString &theParentName)
	Put name attribute onto the label. More...

void	setShapeStyle (const CafDocumentTools &theTools, const TDF_Label &theLabel, const XCAFPrs_Style &theStyle)
	Put color and material attributes onto the label. More...

void	setShapeNamedData (const CafDocumentTools &theTools, const TDF_Label &theLabel, const Handle< TDataStd_NamedData > &theNameData)
	Put name data (metadata) attribute onto the label. More...

void	generateNames (const TCollection_AsciiString &theFile, const Standard_Integer theRootLower, const Standard_Boolean theWithSubLabels)
	Generate names for root labels starting from specified index. More...

static TCollection_AsciiString	shapeTypeToString (TopAbs_ShapeEnum theType)
	Return shape type as string. More...

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Detailed Description

The general interface for importing mesh data into XDE document.

The tool implements auxiliary structures for creating an XDE document in two steps: 1) Creating TopoDS_Shape hierarchy (myRootShapes) and Shape attributes (myAttribMap) separately within performMesh(). Attributes include names and styles. 2) Filling XDE document from these auxiliary structures. Named elements are expanded within document structure, while Compounds having no named children will remain collapsed. In addition, unnamed nodes can be filled with generated names like "Face", "Compound" via generateNames() method, and the very root unnamed node can be filled from file name like "MyModel.obj".

Constructor & Destructor Documentation

◆ RWMesh_CafReader()

RWMesh_CafReader::RWMesh_CafReader ( )

Empty constructor.

◆ ~RWMesh_CafReader()

virtual RWMesh_CafReader::~RWMesh_CafReader ( )

virtual

Destructor.

Member Function Documentation

◆ addShapeIntoDoc()

Standard_Boolean RWMesh_CafReader::addShapeIntoDoc	(	CafDocumentTools &	theTools,
		const TopoDS_Shape &	theShape,
		const TDF_Label &	theLabel,
		const TCollection_AsciiString &	theParentName
	)

protected

Append new shape into the document (recursively).

◆ addSubShapeIntoDoc()

Standard_Boolean RWMesh_CafReader::addSubShapeIntoDoc	(	CafDocumentTools &	theTools,
		const TopoDS_Shape &	theShape,
		const TDF_Label &	theParentLabel,
		const RWMesh_NodeAttributes &	theAttribs
	)

protected

Append new sub-shape into the document (recursively).

◆ CoordinateSystemConverter()

const RWMesh_CoordinateSystemConverter& RWMesh_CafReader::CoordinateSystemConverter ( ) const

inline

Return coordinate system converter.

◆ Document()

const Handle< TDocStd_Document >& RWMesh_CafReader::Document ( ) const

inline

Return target document.

◆ ExternalFiles()

const NCollection_IndexedMap<TCollection_AsciiString>& RWMesh_CafReader::ExternalFiles ( ) const

inline

Return the list of complementary files - external references (textures, data, etc.).

◆ ExtraStatus()

Standard_Integer RWMesh_CafReader::ExtraStatus ( ) const

inline

Return extended status flags.

See also: RWMesh_CafReaderStatusEx enumeration.

◆ FileCoordinateSystem()

const gp_Ax3& RWMesh_CafReader::FileCoordinateSystem ( ) const

inline

Return file origin coordinate system; can be UNDEFINED, which means no conversion will be done.

◆ FileLengthUnit()

Standard_Real RWMesh_CafReader::FileLengthUnit ( ) const

inline

Return the length unit to convert from while reading the file, defined as scale factor for m (meters). Can be undefined (-1.0) if file format is unitless.

◆ fillDocument()

void RWMesh_CafReader::fillDocument ( )

protected

Fill document with new root shapes.

◆ generateNames()

void RWMesh_CafReader::generateNames	(	const TCollection_AsciiString &	theFile,
		const Standard_Integer	theRootLower,
		const Standard_Boolean	theWithSubLabels
	)

protected

Generate names for root labels starting from specified index.

◆ HasFileCoordinateSystem()

Standard_Boolean RWMesh_CafReader::HasFileCoordinateSystem ( ) const

inline

Return TRUE if file origin coordinate system has been defined.

◆ HasSystemCoordinateSystem()

Standard_Boolean RWMesh_CafReader::HasSystemCoordinateSystem ( ) const

inline

Return TRUE if system coordinate system has been defined; FALSE by default.

◆ MemoryLimitMiB()

Standard_Integer RWMesh_CafReader::MemoryLimitMiB ( ) const

inline

Return memory usage limit in MiB, -1 by default which means no limit.

◆ Metadata()

const TColStd_IndexedDataMapOfStringString& RWMesh_CafReader::Metadata ( ) const

inline

Return metadata map.

◆ Perform()

bool RWMesh_CafReader::Perform	(	const TCollection_AsciiString &	theFile,
		const Message_ProgressRange &	theProgress
	)

inline

Read the data from specified file. The Document instance should be set beforehand.

◆ perform()

virtual Standard_Boolean RWMesh_CafReader::perform	(	const TCollection_AsciiString &	theFile,
		const Message_ProgressRange &	theProgress,
		const Standard_Boolean	theToProbe
	)

protectedvirtual

Read the data from specified file. Default implementation calls performMesh() and fills XDE document from collected shapes.

Parameters

theFile	file to read
optional	progress indicator
theToProbe	flag indicating that mesh data should be skipped and only basing information to be read

◆ performMesh()

virtual Standard_Boolean RWMesh_CafReader::performMesh	(	const TCollection_AsciiString &	theFile,
		const Message_ProgressRange &	theProgress,
		const Standard_Boolean	theToProbe
	)

protectedpure virtual

Read the mesh from specified file - interface to be implemented by sub-classes.

Implemented in RWGltf_CafReader, and RWObj_CafReader.

◆ ProbeHeader()

Standard_Boolean RWMesh_CafReader::ProbeHeader	(	const TCollection_AsciiString &	theFile,
		const Message_ProgressRange &	theProgress = `Message_ProgressRange()`
	)

inline

Read the header data from specified file without reading entire model. The main purpose is collecting metadata and external references - for copying model into a new location, for example. Can be NOT implemented (unsupported by format / reader).

◆ RootPrefix()

const TCollection_AsciiString& RWMesh_CafReader::RootPrefix ( ) const

inline

Return prefix for generating root labels names.

◆ SetCoordinateSystemConverter()

void RWMesh_CafReader::SetCoordinateSystemConverter ( const RWMesh_CoordinateSystemConverter & theConverter )

inline

Set coordinate system converter.

◆ SetDocument()

void RWMesh_CafReader::SetDocument ( const Handle< TDocStd_Document > & theDoc )

inline

Set target document.

◆ SetFileCoordinateSystem() [1/2]

void RWMesh_CafReader::SetFileCoordinateSystem ( const gp_Ax3 & theCS )

inline

Set (override) file origin coordinate system to perform conversion during read.

◆ SetFileCoordinateSystem() [2/2]

void RWMesh_CafReader::SetFileCoordinateSystem ( RWMesh_CoordinateSystem theCS )

inline

Set (override) file origin coordinate system to perform conversion during read.

◆ SetFileLengthUnit()

void RWMesh_CafReader::SetFileLengthUnit ( Standard_Real theUnits )

inline

Set (override) file length units to convert from while reading the file, defined as scale factor for m (meters).

◆ SetFillIncompleteDocument()

void RWMesh_CafReader::SetFillIncompleteDocument ( Standard_Boolean theToFillIncomplete )

inline

Set flag allowing partially read file content to be put into the XDE document.

◆ SetMemoryLimitMiB()

void RWMesh_CafReader::SetMemoryLimitMiB ( Standard_Integer theLimitMiB )

inline

Set memory usage limit in MiB; can be ignored by reader implementation!

◆ SetRootPrefix()

void RWMesh_CafReader::SetRootPrefix ( const TCollection_AsciiString & theRootPrefix )

inline

Set prefix for generating root labels names.

◆ setShapeName()

void RWMesh_CafReader::setShapeName	(	const TDF_Label &	theLabel,
		const TopAbs_ShapeEnum	theShapeType,
		const TCollection_AsciiString &	theName,
		const TDF_Label &	theParentLabel,
		const TCollection_AsciiString &	theParentName
	)

protected

Put name attribute onto the label.

◆ setShapeNamedData()

void RWMesh_CafReader::setShapeNamedData	(	const CafDocumentTools &	theTools,
		const TDF_Label &	theLabel,
		const Handle< TDataStd_NamedData > &	theNameData
	)

protected

Put name data (metadata) attribute onto the label.

◆ setShapeStyle()

void RWMesh_CafReader::setShapeStyle	(	const CafDocumentTools &	theTools,
		const TDF_Label &	theLabel,
		const XCAFPrs_Style &	theStyle
	)

protected

Put color and material attributes onto the label.

◆ SetSystemCoordinateSystem() [1/2]

void RWMesh_CafReader::SetSystemCoordinateSystem ( const gp_Ax3 & theCS )

inline

Set system origin coordinate system to perform conversion into during read.

◆ SetSystemCoordinateSystem() [2/2]

void RWMesh_CafReader::SetSystemCoordinateSystem ( RWMesh_CoordinateSystem theCS )

inline

Set system origin coordinate system to perform conversion into during read.

◆ SetSystemLengthUnit()

void RWMesh_CafReader::SetSystemLengthUnit ( Standard_Real theUnits )

inline

Set system length units to convert into while reading the file, defined as scale factor for m (meters).

◆ shapeTypeToString()

static TCollection_AsciiString RWMesh_CafReader::shapeTypeToString ( TopAbs_ShapeEnum theType )

inlinestaticprotected

Return shape type as string.

See also: TopAbs::ShapeTypeToString()

◆ SingleShape()

TopoDS_Shape RWMesh_CafReader::SingleShape ( ) const

Return result as a single shape.

◆ SystemCoordinateSystem()

const gp_Ax3& RWMesh_CafReader::SystemCoordinateSystem ( ) const

inline

Return system coordinate system; UNDEFINED by default, which means that no conversion will be done.

◆ SystemLengthUnit()

Standard_Real RWMesh_CafReader::SystemLengthUnit ( ) const

inline

Return the length unit to convert into while reading the file, defined as scale factor for m (meters); -1.0 by default, which means that NO conversion will be applied.

◆ ToFillIncompleteDocument()

Standard_Boolean RWMesh_CafReader::ToFillIncompleteDocument ( ) const

inline

Flag indicating if partially read file content should be put into the XDE document, TRUE by default.

Partial read means unexpected end of file, critical parsing syntax errors in the middle of file, or reached memory limit indicated by performMesh() returning FALSE. Partial read allows importing a model even in case of formal reading failure, so that it will be up to user to decide if processed data has any value.

In case of partial read (performMesh() returns FALSE, but there are some data that could be put into document), Perform() will return TRUE and result flag will have failure bit set.

See also: MemoryLimitMiB(), ExtraStatus().

Field Documentation

◆ myAttribMap

RWMesh_NodeAttributeMap RWMesh_CafReader::myAttribMap

protected

map of per-shape attributes

◆ myCoordSysConverter

RWMesh_CoordinateSystemConverter RWMesh_CafReader::myCoordSysConverter

protected

coordinate system converter

◆ myExternalFiles

NCollection_IndexedMap<TCollection_AsciiString> RWMesh_CafReader::myExternalFiles

protected

the list of complementary files - external references (textures, data, etc.)

◆ myExtraStatus

Standard_Integer RWMesh_CafReader::myExtraStatus

protected

extra status bitmask

◆ myMemoryLimitMiB

Standard_Integer RWMesh_CafReader::myMemoryLimitMiB

protected

memory usage limit

◆ myMetadata

TColStd_IndexedDataMapOfStringString RWMesh_CafReader::myMetadata

protected

metadata map

◆ myRootPrefix

TCollection_AsciiString RWMesh_CafReader::myRootPrefix

protected

root folder for generating root labels names

◆ myRootShapes

TopTools_SequenceOfShape RWMesh_CafReader::myRootShapes

protected

sequence of result root shapes

◆ myToFillDoc

Standard_Boolean RWMesh_CafReader::myToFillDoc

protected

fill document from shape sequence

◆ myToFillIncomplete

Standard_Boolean RWMesh_CafReader::myToFillIncomplete

protected

fill the document with partially retrieved data even if reader has failed with error

◆ myXdeDoc

Handle< TDocStd_Document > RWMesh_CafReader::myXdeDoc

protected

target document

The documentation for this class was generated from the following file:

RWMesh_CafReader.hxx

Data Structures

Public Member Functions

Protected Member Functions

tools for filling XDE document

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ RWMesh_CafReader()

◆ ~RWMesh_CafReader()

Member Function Documentation

◆ addShapeIntoDoc()

◆ addSubShapeIntoDoc()

◆ CoordinateSystemConverter()

◆ Document()

◆ ExternalFiles()

◆ ExtraStatus()

◆ FileCoordinateSystem()

◆ FileLengthUnit()

◆ fillDocument()

◆ generateNames()

◆ HasFileCoordinateSystem()

◆ HasSystemCoordinateSystem()

◆ MemoryLimitMiB()

◆ Metadata()

◆ Perform()

◆ perform()

◆ performMesh()

◆ ProbeHeader()

◆ RootPrefix()

◆ SetCoordinateSystemConverter()

◆ SetDocument()

◆ SetFileCoordinateSystem() [1/2]

◆ SetFileCoordinateSystem() [2/2]

◆ SetFileLengthUnit()

◆ SetFillIncompleteDocument()

◆ SetMemoryLimitMiB()

◆ SetRootPrefix()

◆ setShapeName()

◆ setShapeNamedData()

◆ setShapeStyle()

◆ SetSystemCoordinateSystem() [1/2]

◆ SetSystemCoordinateSystem() [2/2]

◆ SetSystemLengthUnit()

◆ shapeTypeToString()

◆ SingleShape()

◆ SystemCoordinateSystem()

◆ SystemLengthUnit()

◆ ToFillIncompleteDocument()

Field Documentation

◆ myAttribMap

◆ myCoordSysConverter

◆ myExternalFiles

◆ myExtraStatus

◆ myMemoryLimitMiB

◆ myMetadata

◆ myRootPrefix

◆ myRootShapes

◆ myToFillDoc

◆ myToFillIncomplete

◆ myXdeDoc