This class is private. It is used by the class Builder from FilletSurf. It computes geometric information about fillets. More...

#include <FilletSurf_InternalBuilder.hxx>

Inheritance diagram for FilletSurf_InternalBuilder:

[legend]

Public Member Functions
	FilletSurf_InternalBuilder (const TopoDS_Shape &S, const ChFi3d_FilletShape FShape=ChFi3d_Polynomial, const Standard_Real Ta=1.0e-2, const Standard_Real Tapp3d=1.0e-4, const Standard_Real Tapp2d=1.0e-5)

Standard_Integer	Add (const TopTools_ListOfShape &E, const Standard_Real R)
	Initializes the contour with a list of Edges 0 : no problem 1 : empty list 2 : the edges are not G1 3 : two connected faces on a same support are not G1 4 : the edge is not on shape 5 : NotSharpEdge: the edge is not sharp. More...

void	Perform ()

Standard_Boolean	Done () const

Standard_Integer	NbSurface () const
	gives the number of NUBS surfaces of the Fillet. More...

const Handle< Geom_Surface > &	SurfaceFillet (const Standard_Integer Index) const
	gives the NUBS surface of index Index. More...

Standard_Real	TolApp3d (const Standard_Integer Index) const
	gives the 3d tolerance reached during approximation of the surface of index Index More...

const TopoDS_Face &	SupportFace1 (const Standard_Integer Index) const
	gives the first support face relative to SurfaceFillet(Index); More...

const TopoDS_Face &	SupportFace2 (const Standard_Integer Index) const
	gives the second support face relative to SurfaceFillet(Index); More...

const Handle< Geom_Curve > &	CurveOnFace1 (const Standard_Integer Index) const
	gives the 3d curve of SurfaceFillet(Index) on SupportFace1(Index) More...

const Handle< Geom_Curve > &	CurveOnFace2 (const Standard_Integer Index) const
	gives the 3d curve of SurfaceFillet(Index) on SupportFace2(Index) More...

const Handle< Geom2d_Curve > &	PCurveOnFace1 (const Standard_Integer Index) const
	gives the PCurve associated to CurvOnSup1(Index) on the support face More...

const Handle< Geom2d_Curve > &	PCurve1OnFillet (const Standard_Integer Index) const
	gives the PCurve associated to CurveOnFace1(Index) on the Fillet More...

const Handle< Geom2d_Curve > &	PCurveOnFace2 (const Standard_Integer Index) const
	gives the PCurve associated to CurveOnSup2(Index) on the support face More...

const Handle< Geom2d_Curve > &	PCurve2OnFillet (const Standard_Integer Index) const
	gives the PCurve associated to CurveOnSup2(Index) on the fillet More...

Standard_Real	FirstParameter () const
	gives the parameter of the fillet on the first edge. More...

Standard_Real	LastParameter () const
	gives the parameter of the fillet on the last edge More...

FilletSurf_StatusType	StartSectionStatus () const

FilletSurf_StatusType	EndSectionStatus () const

void	Simulate ()

Standard_Integer	NbSection (const Standard_Integer IndexSurf) const

void	Section (const Standard_Integer IndexSurf, const Standard_Integer IndexSec, Handle< Geom_TrimmedCurve > &Circ) const

Public Member Functions inherited from ChFi3d_FilBuilder
	ChFi3d_FilBuilder (const TopoDS_Shape &S, const ChFi3d_FilletShape FShape=ChFi3d_Rational, const Standard_Real Ta=1.0e-2)

void	SetFilletShape (const ChFi3d_FilletShape FShape)
	Sets the type of fillet surface. More...

ChFi3d_FilletShape	GetFilletShape () const
	Returns the type of fillet surface. More...

void	Add (const TopoDS_Edge &E)
	initialisation of a contour with the first edge (the following are found by propagation). Attention, you need to start with SetRadius. More...

void	Add (const Standard_Real Radius, const TopoDS_Edge &E)
	initialisation of the constant vector the corresponding 1st edge. More...

void	SetRadius (const Handle< Law_Function > &C, const Standard_Integer IC, const Standard_Integer IinC)
	Set the radius of the contour of index IC. More...

Standard_Boolean	IsConstant (const Standard_Integer IC)
	Returns true the contour is flaged as edge constant. More...

Standard_Real	Radius (const Standard_Integer IC)
	Returns the vector if the contour is flagged as edge constant. More...

void	ResetContour (const Standard_Integer IC)
	Reset all vectors of contour IC. More...

void	SetRadius (const Standard_Real Radius, const Standard_Integer IC, const TopoDS_Edge &E)
	Set a constant on edge E of the contour of index IC. Since then E is flagged as constant. More...

void	UnSet (const Standard_Integer IC, const TopoDS_Edge &E)
	Extracts the flag constant and the vector of edge E. More...

void	SetRadius (const Standard_Real Radius, const Standard_Integer IC, const TopoDS_Vertex &V)
	Set a vector on vertex V of the contour of index IC. More...

void	UnSet (const Standard_Integer IC, const TopoDS_Vertex &V)
	Extracts the vector of the vertex V. More...

void	SetRadius (const gp_XY &UandR, const Standard_Integer IC, const Standard_Integer IinC)
	Set a vertex on the point of parametre U in the edge IinC of the contour of index IC. More...

Standard_Boolean	IsConstant (const Standard_Integer IC, const TopoDS_Edge &E)
	Returns true E is flagged as edge constant. More...

Standard_Real	Radius (const Standard_Integer IC, const TopoDS_Edge &E)
	Returns the vector if E is flagged as edge constant. More...

Standard_Boolean	GetBounds (const Standard_Integer IC, const TopoDS_Edge &E, Standard_Real &First, Standard_Real &Last)
	Returns in First and Last les extremities of the part of variable vector framing E, returns False if E is flagged as edge constant. More...

Handle< Law_Function >	GetLaw (const Standard_Integer IC, const TopoDS_Edge &E)
	Returns the rule of elementary evolution of the part to variable vector framing E, returns a rule zero if E is flagged as edge constant. More...

void	SetLaw (const Standard_Integer IC, const TopoDS_Edge &E, const Handle< Law_Function > &L)
	Sets the rule of elementary evolution of the part to variable vector framing E. More...

void	Simulate (const Standard_Integer IC)

Standard_Integer	NbSurf (const Standard_Integer IC) const

Handle< ChFiDS_SecHArray1 >	Sect (const Standard_Integer IC, const Standard_Integer IS) const

Public Member Functions inherited from ChFi3d_Builder
virtual void	Delete ()

virtual	~ChFi3d_Builder ()

void	SetParams (const Standard_Real Tang, const Standard_Real Tesp, const Standard_Real T2d, const Standard_Real TApp3d, const Standard_Real TolApp2d, const Standard_Real Fleche)

void	SetContinuity (const GeomAbs_Shape InternalContinuity, const Standard_Real AngularTolerance)

void	Remove (const TopoDS_Edge &E)
	extracts from the list the contour containing edge E. More...

Standard_Integer	Contains (const TopoDS_Edge &E) const
	gives the number of the contour containing E or 0 if E does not belong to any contour. More...

Standard_Integer	Contains (const TopoDS_Edge &E, Standard_Integer &IndexInSpine) const
	gives the number of the contour containing E or 0 if E does not belong to any contour. Sets in IndexInSpine the index of E in the contour if it's found More...

Standard_Integer	NbElements () const
	gives the number of disjoint contours on which the fillets are calculated More...

Handle< ChFiDS_Spine >	Value (const Standard_Integer I) const
	gives the n'th set of edges (contour) if I >NbElements() More...

Standard_Real	Length (const Standard_Integer IC) const
	returns the length of the contour of index IC. More...

TopoDS_Vertex	FirstVertex (const Standard_Integer IC) const
	returns the First vertex V of the contour of index IC. More...

TopoDS_Vertex	LastVertex (const Standard_Integer IC) const
	returns the Last vertex V of the contour of index IC. More...

Standard_Real	Abscissa (const Standard_Integer IC, const TopoDS_Vertex &V) const
	returns the abscissa of the vertex V on the contour of index IC. More...

Standard_Real	RelativeAbscissa (const Standard_Integer IC, const TopoDS_Vertex &V) const
	returns the relative abscissa([0.,1.]) of the vertex V on the contour of index IC. More...

Standard_Boolean	ClosedAndTangent (const Standard_Integer IC) const
	returns true if the contour of index IC is closed an tangent. More...

Standard_Boolean	Closed (const Standard_Integer IC) const
	returns true if the contour of index IC is closed More...

void	Compute ()
	general calculation of geometry on all edges, topologic reconstruction. More...

Standard_Boolean	IsDone () const
	returns True if the computation is success More...

TopoDS_Shape	Shape () const
	if (Isdone()) makes the result. if (!Isdone()) More...

const TopTools_ListOfShape &	Generated (const TopoDS_Shape &EouV)
	Advanced function for the history. More...

Standard_Integer	NbFaultyContours () const
	Returns the number of contours on which the calculation has failed. More...

Standard_Integer	FaultyContour (const Standard_Integer I) const
	Returns the number of I'th contour on which the calculation has failed. More...

Standard_Integer	NbComputedSurfaces (const Standard_Integer IC) const
	Returns the number of surfaces calculated on the contour IC. More...

Handle< Geom_Surface >	ComputedSurface (const Standard_Integer IC, const Standard_Integer IS) const
	Returns the IS'th surface calculated on the contour IC. More...

Standard_Integer	NbFaultyVertices () const
	Returns the number of vertices on which the calculation has failed. More...

TopoDS_Vertex	FaultyVertex (const Standard_Integer IV) const
	Returns the IV'th vertex on which the calculation has failed. More...

Standard_Boolean	HasResult () const
	returns True if a partial result has been calculated More...

TopoDS_Shape	BadShape () const
	if (HasResult()) returns partial result if (!HasResult()) More...

ChFiDS_ErrorStatus	StripeStatus (const Standard_Integer IC) const
	for the stripe IC ,indication on the cause of failure WalkingFailure,TwistedSurface,Error, Ok More...

void	Reset ()
	Reset all results of compute and returns the algorythm in the state of the last acquisition to enable modification of contours or areas. More...

Handle< TopOpeBRepBuild_HBuilder >	Builder () const
	Returns the Builder of topologic operations. More...

Standard_Boolean	SplitKPart (const Handle< ChFiDS_SurfData > &Data, ChFiDS_SequenceOfSurfData &SetData, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Iedge, const Handle< Adaptor3d_HSurface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_HSurface > &S2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Intf, Standard_Boolean &Intl)
	Method, implemented in the inheritants, calculates the elements of construction of the surface (fillet or chamfer). More...

Standard_Integer	PerformTwoCornerbyInter (const Standard_Integer Index)

Protected Member Functions
virtual Standard_Boolean	PerformSurf (ChFiDS_SequenceOfSurfData &SeqData, const Handle< ChFiDS_HElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_HSurface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_HSurface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecOnS1, const Standard_Boolean RecOnS2, const math_Vector &Soldep, Standard_Boolean &Intf, Standard_Boolean &Intl)
	This method calculates the elements of construction of the fillet (constant or evolutive). More...

virtual void	PerformSurf (ChFiDS_SequenceOfSurfData &SeqData, const Handle< ChFiDS_HElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_HSurface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_HCurve2d > &PC1, const Handle< BRepAdaptor_HSurface > &Sref1, const Handle< BRepAdaptor_HCurve2d > &PCref1, Standard_Boolean &Decroch1, const Handle< BRepAdaptor_HSurface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const TopAbs_Orientation Or2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst, const math_Vector &Soldep)
	Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/face. More...

virtual void	PerformSurf (ChFiDS_SequenceOfSurfData &SeqData, const Handle< ChFiDS_HElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_HSurface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const TopAbs_Orientation Or1, const Handle< BRepAdaptor_HSurface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Handle< BRepAdaptor_HCurve2d > &PC2, const Handle< BRepAdaptor_HSurface > &Sref2, const Handle< BRepAdaptor_HCurve2d > &PCref2, Standard_Boolean &Decroch2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst, const math_Vector &Soldep)
	Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/face. More...

virtual void	PerformSurf (ChFiDS_SequenceOfSurfData &Data, const Handle< ChFiDS_HElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_HSurface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_HCurve2d > &PC1, const Handle< BRepAdaptor_HSurface > &Sref1, const Handle< BRepAdaptor_HCurve2d > &PCref1, Standard_Boolean &Decroch1, const TopAbs_Orientation Or1, const Handle< BRepAdaptor_HSurface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Handle< BRepAdaptor_HCurve2d > &PC2, const Handle< BRepAdaptor_HSurface > &Sref2, const Handle< BRepAdaptor_HCurve2d > &PCref2, Standard_Boolean &Decroch2, const TopAbs_Orientation Or2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP1, const Standard_Boolean RecRst1, const Standard_Boolean RecP2, const Standard_Boolean RecRst2, const math_Vector &Soldep)
	Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/edge. More...

Protected Member Functions inherited from ChFi3d_FilBuilder
void	SimulKPart (const Handle< ChFiDS_SurfData > &SD) const

Standard_Boolean	SimulSurf (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_HElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_HSurface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_HSurface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecOnS1, const Standard_Boolean RecOnS2, const math_Vector &Soldep, Standard_Boolean &Intf, Standard_Boolean &Intl)

virtual void	SimulSurf (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_HElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_HSurface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_HCurve2d > &PC1, const Handle< BRepAdaptor_HSurface > &Sref1, const Handle< BRepAdaptor_HCurve2d > &PCref1, Standard_Boolean &Decroch1, const Handle< BRepAdaptor_HSurface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const TopAbs_Orientation Or2, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst, const math_Vector &Soldep)

virtual void	SimulSurf (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_HElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_HSurface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const TopAbs_Orientation Or1, const Handle< BRepAdaptor_HSurface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Handle< BRepAdaptor_HCurve2d > &PC2, const Handle< BRepAdaptor_HSurface > &Sref2, const Handle< BRepAdaptor_HCurve2d > &PCref2, Standard_Boolean &Decroch2, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst, const math_Vector &Soldep)

virtual void	SimulSurf (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_HElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_HSurface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_HCurve2d > &PC1, const Handle< BRepAdaptor_HSurface > &Sref1, const Handle< BRepAdaptor_HCurve2d > &PCref1, Standard_Boolean &Decroch1, const TopAbs_Orientation Or1, const Handle< BRepAdaptor_HSurface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Handle< BRepAdaptor_HCurve2d > &PC2, const Handle< BRepAdaptor_HSurface > &Sref2, const Handle< BRepAdaptor_HCurve2d > &PCref2, Standard_Boolean &Decroch2, const TopAbs_Orientation Or2, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP1, const Standard_Boolean RecRst1, const Standard_Boolean RecP2, const Standard_Boolean RecRst2, const math_Vector &Soldep)

Standard_Boolean	PerformFirstSection (const Handle< ChFiDS_Spine > &S, const Handle< ChFiDS_HElSpine > &HGuide, const Standard_Integer Choix, Handle< BRepAdaptor_HSurface > &S1, Handle< BRepAdaptor_HSurface > &S2, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_TopolTool > &I2, const Standard_Real Par, math_Vector &SolDep, TopAbs_State &Pos1, TopAbs_State &Pos2) const

void	SplitSurf (ChFiDS_SequenceOfSurfData &SeqData, const Handle< BRepBlend_Line > &line)
	Method to split an singular SurfData in several non singular SurfData.. More...

void	PerformTwoCorner (const Standard_Integer Index)

void	PerformThreeCorner (const Standard_Integer Index)

void	ExtentOneCorner (const TopoDS_Vertex &V, const Handle< ChFiDS_Stripe > &S)

void	ExtentTwoCorner (const TopoDS_Vertex &V, const ChFiDS_ListOfStripe &LS)

void	ExtentThreeCorner (const TopoDS_Vertex &V, const ChFiDS_ListOfStripe &LS)

void	SetRegul ()

Protected Member Functions inherited from ChFi3d_Builder
	ChFi3d_Builder (const TopoDS_Shape &S, const Standard_Real Ta)

Standard_Boolean	SimulData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_HElSpine > &Guide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_HSurface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_HSurface > &S2, const Handle< Adaptor3d_TopolTool > &I2, Blend_Function &Func, Blend_FuncInv &FInv, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const math_Vector &Soldep, const Standard_Integer NbSecMin, const Standard_Boolean RecOnS1=Standard_False, const Standard_Boolean RecOnS2=Standard_False)

Standard_Boolean	SimulData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_HElSpine > &HGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_HSurface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_HSurface > &S2, const Handle< Adaptor2d_HCurve2d > &PC2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Decroch, Blend_SurfRstFunction &Func, Blend_FuncInv &FInv, Blend_SurfPointFuncInv &FInvP, Blend_SurfCurvFuncInv &FInvC, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const math_Vector &Soldep, const Standard_Integer NbSecMin, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst)

Standard_Boolean	SimulData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_HElSpine > &HGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_HSurface > &S1, const Handle< Adaptor2d_HCurve2d > &PC1, const Handle< Adaptor3d_TopolTool > &I1, Standard_Boolean &Decroch1, const Handle< Adaptor3d_HSurface > &S2, const Handle< Adaptor2d_HCurve2d > &PC2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Decroch2, Blend_RstRstFunction &Func, Blend_SurfCurvFuncInv &FInv1, Blend_CurvPointFuncInv &FInvP1, Blend_SurfCurvFuncInv &FInv2, Blend_CurvPointFuncInv &FInvP2, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const math_Vector &Soldep, const Standard_Integer NbSecMin, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP1, const Standard_Boolean RecRst1, const Standard_Boolean RecP2, const Standard_Boolean RecRst2)

Standard_Boolean	PerformElement (const Handle< ChFiDS_Spine > &CElement)

void	PerformExtremity (const Handle< ChFiDS_Spine > &CElement)

void	PerformSetOfSurf (Handle< ChFiDS_Stripe > &S, const Standard_Boolean Simul=Standard_False)

void	PerformSetOfKPart (Handle< ChFiDS_Stripe > &S, const Standard_Boolean Simul=Standard_False)

void	PerformSetOfKGen (Handle< ChFiDS_Stripe > &S, const Standard_Boolean Simul=Standard_False)

void	Trunc (const Handle< ChFiDS_SurfData > &SD, const Handle< ChFiDS_Spine > &Spine, const Handle< Adaptor3d_HSurface > &S1, const Handle< Adaptor3d_HSurface > &S2, const Standard_Integer iedge, const Standard_Boolean isfirst, const Standard_Integer cntlFiOnS)

void	CallPerformSurf (Handle< ChFiDS_Stripe > &Stripe, const Standard_Boolean Simul, ChFiDS_SequenceOfSurfData &SeqSD, Handle< ChFiDS_SurfData > &SD, const Handle< ChFiDS_HElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Handle< BRepAdaptor_HSurface > &HS1, const Handle< BRepAdaptor_HSurface > &HS3, const gp_Pnt2d &P1, const gp_Pnt2d &P3, Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_HSurface > &HS2, const Handle< BRepAdaptor_HSurface > &HS4, const gp_Pnt2d &P2, const gp_Pnt2d &P4, Handle< Adaptor3d_TopolTool > &I2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecOnS1, const Standard_Boolean RecOnS2, math_Vector &Soldep, Standard_Boolean &Intf, Standard_Boolean &Intl, Handle< BRepAdaptor_HSurface > &Surf1, Handle< BRepAdaptor_HSurface > &Surf2)

void	PerformMoreThreeCorner (const Standard_Integer Index, const Standard_Integer nbcourb)

Standard_Boolean	SearchFace (const Handle< ChFiDS_Spine > &Sp, const ChFiDS_CommonPoint &Pc, const TopoDS_Face &FRef, TopoDS_Face &FVoi) const

Standard_Boolean	StripeOrientations (const Handle< ChFiDS_Spine > &Sp, TopAbs_Orientation &Or1, TopAbs_Orientation &Or2, Standard_Integer &ChoixConge) const

Standard_Boolean	ComputeData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_HElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_HSurface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_HSurface > &S2, const Handle< Adaptor3d_TopolTool > &I2, Blend_Function &Func, Blend_FuncInv &FInv, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const math_Vector &Soldep, Standard_Boolean &Intf, Standard_Boolean &Intl, Standard_Boolean &Gd1, Standard_Boolean &Gd2, Standard_Boolean &Gf1, Standard_Boolean &Gf2, const Standard_Boolean RecOnS1=Standard_False, const Standard_Boolean RecOnS2=Standard_False)
	Calculates a Line of contact face/face. More...

Standard_Boolean	ComputeData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_HElSpine > &HGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_HSurface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_HSurface > &S2, const Handle< Adaptor2d_HCurve2d > &PC2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Decroch, Blend_SurfRstFunction &Func, Blend_FuncInv &FInv, Blend_SurfPointFuncInv &FInvP, Blend_SurfCurvFuncInv &FInvC, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const math_Vector &Soldep, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst)
	Calculates a Line of contact edge/face. More...

Standard_Boolean	ComputeData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_HElSpine > &HGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_HSurface > &S1, const Handle< Adaptor2d_HCurve2d > &PC1, const Handle< Adaptor3d_TopolTool > &I1, Standard_Boolean &Decroch1, const Handle< Adaptor3d_HSurface > &S2, const Handle< Adaptor2d_HCurve2d > &PC2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Decroch2, Blend_RstRstFunction &Func, Blend_SurfCurvFuncInv &FInv1, Blend_CurvPointFuncInv &FInvP1, Blend_SurfCurvFuncInv &FInv2, Blend_CurvPointFuncInv &FInvP2, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const math_Vector &Soldep, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP1, const Standard_Boolean RecRst1, const Standard_Boolean RecP2, const Standard_Boolean RecRst2)
	Calculates a Line of contact edge/edge. More...

Standard_Boolean	CompleteData (Handle< ChFiDS_SurfData > &Data, Blend_Function &Func, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_HSurface > &S1, const Handle< Adaptor3d_HSurface > &S2, const TopAbs_Orientation Or1, const Standard_Boolean Gd1, const Standard_Boolean Gd2, const Standard_Boolean Gf1, const Standard_Boolean Gf2, const Standard_Boolean Reversed=Standard_False)

Standard_Boolean	CompleteData (Handle< ChFiDS_SurfData > &Data, Blend_SurfRstFunction &Func, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_HSurface > &S1, const Handle< Adaptor3d_HSurface > &S2, const TopAbs_Orientation Or, const Standard_Boolean Reversed)

Standard_Boolean	CompleteData (Handle< ChFiDS_SurfData > &Data, Blend_RstRstFunction &Func, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_HSurface > &S1, const Handle< Adaptor3d_HSurface > &S2, const TopAbs_Orientation Or)

Standard_Boolean	StoreData (Handle< ChFiDS_SurfData > &Data, const AppBlend_Approx &Approx, const Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_HSurface > &S1, const Handle< Adaptor3d_HSurface > &S2, const TopAbs_Orientation Or1, const Standard_Boolean Gd1, const Standard_Boolean Gd2, const Standard_Boolean Gf1, const Standard_Boolean Gf2, const Standard_Boolean Reversed=Standard_False)

Standard_Boolean	CompleteData (Handle< ChFiDS_SurfData > &Data, const Handle< Geom_Surface > &Surfcoin, const Handle< Adaptor3d_HSurface > &S1, const Handle< Geom2d_Curve > &PC1, const Handle< Adaptor3d_HSurface > &S2, const Handle< Geom2d_Curve > &PC2, const TopAbs_Orientation Or, const Standard_Boolean On1, const Standard_Boolean Gd1, const Standard_Boolean Gd2, const Standard_Boolean Gf1, const Standard_Boolean Gf2)

Additional Inherited Members
Protected Attributes inherited from ChFi3d_Builder
Standard_Real	tolappangle

Standard_Real	tolesp

Standard_Real	tol2d

Standard_Real	tolapp3d

Standard_Real	tolapp2d

Standard_Real	fleche

GeomAbs_Shape	myConti

ChFiDS_Map	myEFMap

ChFiDS_Map	myESoMap

ChFiDS_Map	myEShMap

ChFiDS_Map	myVFMap

ChFiDS_Map	myVEMap

Handle< TopOpeBRepDS_HDataStructure >	myDS

Handle< TopOpeBRepBuild_HBuilder >	myCoup

ChFiDS_ListOfStripe	myListStripe

ChFiDS_StripeMap	myVDataMap

ChFiDS_Regularities	myRegul

ChFiDS_ListOfStripe	badstripes

TopTools_ListOfShape	badvertices

TopTools_DataMapOfShapeListOfInteger	myEVIMap

Standard_Boolean	done

Standard_Boolean	hasresult

Detailed Description

This class is private. It is used by the class Builder from FilletSurf. It computes geometric information about fillets.

Constructor & Destructor Documentation

FilletSurf_InternalBuilder::FilletSurf_InternalBuilder	(	const TopoDS_Shape &	S,
		const ChFi3d_FilletShape	FShape = `ChFi3d_Polynomial`,
		const Standard_Real	Ta = `1.0e-2`,
		const Standard_Real	Tapp3d = `1.0e-4`,
		const Standard_Real	Tapp2d = `1.0e-5`
	)

Member Function Documentation

Standard_Integer FilletSurf_InternalBuilder::Add	(	const TopTools_ListOfShape &	E,
		const Standard_Real	R
	)

Initializes the contour with a list of Edges 0 : no problem 1 : empty list 2 : the edges are not G1 3 : two connected faces on a same support are not G1 4 : the edge is not on shape 5 : NotSharpEdge: the edge is not sharp.

const Handle< Geom_Curve >& FilletSurf_InternalBuilder::CurveOnFace1 ( const Standard_Integer Index ) const

gives the 3d curve of SurfaceFillet(Index) on SupportFace1(Index)

const Handle< Geom_Curve >& FilletSurf_InternalBuilder::CurveOnFace2 ( const Standard_Integer Index ) const

gives the 3d curve of SurfaceFillet(Index) on SupportFace2(Index)

Standard_Boolean FilletSurf_InternalBuilder::Done ( ) const

FilletSurf_StatusType FilletSurf_InternalBuilder::EndSectionStatus ( ) const

Standard_Real FilletSurf_InternalBuilder::FirstParameter ( ) const

gives the parameter of the fillet on the first edge.

Standard_Real FilletSurf_InternalBuilder::LastParameter ( ) const

gives the parameter of the fillet on the last edge

Standard_Integer FilletSurf_InternalBuilder::NbSection ( const Standard_Integer IndexSurf ) const

Standard_Integer FilletSurf_InternalBuilder::NbSurface ( ) const

gives the number of NUBS surfaces of the Fillet.

const Handle< Geom2d_Curve >& FilletSurf_InternalBuilder::PCurve1OnFillet ( const Standard_Integer Index ) const

gives the PCurve associated to CurveOnFace1(Index) on the Fillet

const Handle< Geom2d_Curve >& FilletSurf_InternalBuilder::PCurve2OnFillet ( const Standard_Integer Index ) const

gives the PCurve associated to CurveOnSup2(Index) on the fillet

const Handle< Geom2d_Curve >& FilletSurf_InternalBuilder::PCurveOnFace1 ( const Standard_Integer Index ) const

gives the PCurve associated to CurvOnSup1(Index) on the support face

const Handle< Geom2d_Curve >& FilletSurf_InternalBuilder::PCurveOnFace2 ( const Standard_Integer Index ) const

gives the PCurve associated to CurveOnSup2(Index) on the support face

void FilletSurf_InternalBuilder::Perform ( )

virtual Standard_Boolean FilletSurf_InternalBuilder::PerformSurf	(	ChFiDS_SequenceOfSurfData &	SeqData,
		const Handle< ChFiDS_HElSpine > &	Guide,
		const Handle< ChFiDS_Spine > &	Spine,
		const Standard_Integer	Choix,
		const Handle< BRepAdaptor_HSurface > &	S1,
		const Handle< Adaptor3d_TopolTool > &	I1,
		const Handle< BRepAdaptor_HSurface > &	S2,
		const Handle< Adaptor3d_TopolTool > &	I2,
		const Standard_Real	MaxStep,
		const Standard_Real	Fleche,
		const Standard_Real	TolGuide,
		Standard_Real &	First,
		Standard_Real &	Last,
		const Standard_Boolean	Inside,
		const Standard_Boolean	Appro,
		const Standard_Boolean	Forward,
		const Standard_Boolean	RecOnS1,
		const Standard_Boolean	RecOnS2,
		const math_Vector &	Soldep,
		Standard_Boolean &	Intf,
		Standard_Boolean &	Intl
	)

protectedvirtual

This method calculates the elements of construction of the fillet (constant or evolutive).

Reimplemented from ChFi3d_FilBuilder.

virtual void FilletSurf_InternalBuilder::PerformSurf	(	ChFiDS_SequenceOfSurfData &	Data,
		const Handle< ChFiDS_HElSpine > &	Guide,
		const Handle< ChFiDS_Spine > &	Spine,
		const Standard_Integer	Choix,
		const Handle< BRepAdaptor_HSurface > &	S1,
		const Handle< Adaptor3d_TopolTool > &	I1,
		const Handle< BRepAdaptor_HCurve2d > &	PC1,
		const Handle< BRepAdaptor_HSurface > &	Sref1,
		const Handle< BRepAdaptor_HCurve2d > &	PCref1,
		Standard_Boolean &	Decroch1,
		const Handle< BRepAdaptor_HSurface > &	S2,
		const Handle< Adaptor3d_TopolTool > &	I2,
		const TopAbs_Orientation	Or2,
		const Standard_Real	MaxStep,
		const Standard_Real	Fleche,
		const Standard_Real	TolGuide,
		Standard_Real &	First,
		Standard_Real &	Last,
		const Standard_Boolean	Inside,
		const Standard_Boolean	Appro,
		const Standard_Boolean	Forward,
		const Standard_Boolean	RecP,
		const Standard_Boolean	RecS,
		const Standard_Boolean	RecRst,
		const math_Vector &	Soldep
	)

protectedvirtual

Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/face.

Reimplemented from ChFi3d_FilBuilder.

virtual void FilletSurf_InternalBuilder::PerformSurf	(	ChFiDS_SequenceOfSurfData &	Data,
		const Handle< ChFiDS_HElSpine > &	Guide,
		const Handle< ChFiDS_Spine > &	Spine,
		const Standard_Integer	Choix,
		const Handle< BRepAdaptor_HSurface > &	S1,
		const Handle< Adaptor3d_TopolTool > &	I1,
		const TopAbs_Orientation	Or1,
		const Handle< BRepAdaptor_HSurface > &	S2,
		const Handle< Adaptor3d_TopolTool > &	I2,
		const Handle< BRepAdaptor_HCurve2d > &	PC2,
		const Handle< BRepAdaptor_HSurface > &	Sref2,
		const Handle< BRepAdaptor_HCurve2d > &	PCref2,
		Standard_Boolean &	Decroch2,
		const Standard_Real	MaxStep,
		const Standard_Real	Fleche,
		const Standard_Real	TolGuide,
		Standard_Real &	First,
		Standard_Real &	Last,
		const Standard_Boolean	Inside,
		const Standard_Boolean	Appro,
		const Standard_Boolean	Forward,
		const Standard_Boolean	RecP,
		const Standard_Boolean	RecS,
		const Standard_Boolean	RecRst,
		const math_Vector &	Soldep
	)

protectedvirtual

Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/face.

Reimplemented from ChFi3d_FilBuilder.

virtual void FilletSurf_InternalBuilder::PerformSurf	(	ChFiDS_SequenceOfSurfData &	Data,
		const Handle< ChFiDS_HElSpine > &	Guide,
		const Handle< ChFiDS_Spine > &	Spine,
		const Standard_Integer	Choix,
		const Handle< BRepAdaptor_HSurface > &	S1,
		const Handle< Adaptor3d_TopolTool > &	I1,
		const Handle< BRepAdaptor_HCurve2d > &	PC1,
		const Handle< BRepAdaptor_HSurface > &	Sref1,
		const Handle< BRepAdaptor_HCurve2d > &	PCref1,
		Standard_Boolean &	Decroch1,
		const TopAbs_Orientation	Or1,
		const Handle< BRepAdaptor_HSurface > &	S2,
		const Handle< Adaptor3d_TopolTool > &	I2,
		const Handle< BRepAdaptor_HCurve2d > &	PC2,
		const Handle< BRepAdaptor_HSurface > &	Sref2,
		const Handle< BRepAdaptor_HCurve2d > &	PCref2,
		Standard_Boolean &	Decroch2,
		const TopAbs_Orientation	Or2,
		const Standard_Real	MaxStep,
		const Standard_Real	Fleche,
		const Standard_Real	TolGuide,
		Standard_Real &	First,
		Standard_Real &	Last,
		const Standard_Boolean	Inside,
		const Standard_Boolean	Appro,
		const Standard_Boolean	Forward,
		const Standard_Boolean	RecP1,
		const Standard_Boolean	RecRst1,
		const Standard_Boolean	RecP2,
		const Standard_Boolean	RecRst2,
		const math_Vector &	Soldep
	)

protectedvirtual

Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/edge.

Reimplemented from ChFi3d_FilBuilder.

void FilletSurf_InternalBuilder::Section	(	const Standard_Integer	IndexSurf,
		const Standard_Integer	IndexSec,
		Handle< Geom_TrimmedCurve > &	Circ
	)		const

void FilletSurf_InternalBuilder::Simulate ( )

FilletSurf_StatusType FilletSurf_InternalBuilder::StartSectionStatus ( ) const

const TopoDS_Face& FilletSurf_InternalBuilder::SupportFace1 ( const Standard_Integer Index ) const

gives the first support face relative to SurfaceFillet(Index);

const TopoDS_Face& FilletSurf_InternalBuilder::SupportFace2 ( const Standard_Integer Index ) const

gives the second support face relative to SurfaceFillet(Index);

const Handle< Geom_Surface >& FilletSurf_InternalBuilder::SurfaceFillet ( const Standard_Integer Index ) const

gives the NUBS surface of index Index.

Standard_Real FilletSurf_InternalBuilder::TolApp3d ( const Standard_Integer Index ) const

gives the 3d tolerance reached during approximation of the surface of index Index

The documentation for this class was generated from the following file:

FilletSurf_InternalBuilder.hxx

Public Member Functions

Protected Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation