Open CASCADE Technology
7.1.0.beta

NSide Filling This algorithm avoids to build a face from: More...
#include <BRepOffsetAPI_MakeFilling.hxx>
Public Member Functions  
BRepOffsetAPI_MakeFilling (const Standard_Integer Degree=3, const Standard_Integer NbPtsOnCur=15, const Standard_Integer NbIter=2, const Standard_Boolean Anisotropie=Standard_False, const Standard_Real Tol2d=0.00001, const Standard_Real Tol3d=0.0001, const Standard_Real TolAng=0.01, const Standard_Real TolCurv=0.1, const Standard_Integer MaxDeg=8, const Standard_Integer MaxSegments=9)  
Constructs a wire filling object defined by. More...  
void  SetConstrParam (const Standard_Real Tol2d=0.00001, const Standard_Real Tol3d=0.0001, const Standard_Real TolAng=0.01, const Standard_Real TolCurv=0.1) 
Sets the values of Tolerances used to control the constraint. Tol2d: Tol3d: it is the maximum distance allowed between the support surface and the constraints TolAng: it is the maximum angle allowed between the normal of the surface and the constraints TolCurv: it is the maximum difference of curvature allowed between the surface and the constraint. More...  
void  SetResolParam (const Standard_Integer Degree=3, const Standard_Integer NbPtsOnCur=15, const Standard_Integer NbIter=2, const Standard_Boolean Anisotropie=Standard_False) 
Sets the parameters used for resolution. The default values of these parameters have been chosen for a good ratio quality/performance. Degree: it is the order of energy criterion to minimize for computing the deformation of the surface. The default value is 3 The recommanded value is i+2 where i is the maximum order of the constraints. NbPtsOnCur: it is the average number of points for discretisation of the edges. NbIter: it is the maximum number of iterations of the process. For each iteration the number of discretisation points is increased. Anisotropie: More...  
void  SetApproxParam (const Standard_Integer MaxDeg=8, const Standard_Integer MaxSegments=9) 
Sets the parameters used to approximate the filling surface. These include: More...  
void  LoadInitSurface (const TopoDS_Face &Surf) 
Loads the initial surface Surf to begin the construction of the surface. This optional function is useful if the surface resulting from construction for the algorithm is likely to be complex. The support surface of the face under construction is computed by a deformation of Surf which satisfies the given constraints. The set of bounding edges defines the wire of the face. If no initial surface is given, the algorithm computes it automatically. If the set of edges is not connected (Free constraint), missing edges are automatically computed. Important: the initial surface must have orthogonal local coordinates, i.e. partial derivatives dS/du and dS/dv must be orthogonal at each point of surface. If this condition breaks, distortions of resulting surface are possible. More...  
Standard_Integer  Add (const TopoDS_Edge &Constr, const GeomAbs_Shape Order, const Standard_Boolean IsBound=Standard_True) 
Adds a new constraint which also defines an edge of the wire of the face Order: Order of the constraint: GeomAbs_C0 : the surface has to pass by 3D representation of the edge GeomAbs_G1 : the surface has to pass by 3D representation of the edge and to respect tangency with the first face of the edge GeomAbs_G2 : the surface has to pass by 3D representation of the edge and to respect tangency and curvature with the first face of the edge. Raises ConstructionError if the edge has no representation on a face and Order is GeomAbs_G1 or GeomAbs_G2. More...  
Standard_Integer  Add (const TopoDS_Edge &Constr, const TopoDS_Face &Support, const GeomAbs_Shape Order, const Standard_Boolean IsBound=Standard_True) 
Adds a new constraint which also defines an edge of the wire of the face Order: Order of the constraint: GeomAbs_C0 : the surface has to pass by 3D representation of the edge GeomAbs_G1 : the surface has to pass by 3D representation of the edge and to respect tangency with the given face GeomAbs_G2 : the surface has to pass by 3D representation of the edge and to respect tangency and curvature with the given face. Raises ConstructionError if the edge has no 2d representation on the given face. More...  
Standard_Integer  Add (const TopoDS_Face &Support, const GeomAbs_Shape Order) 
Adds a free constraint on a face. The corresponding edge has to be automatically recomputed. It is always a bound. More...  
Standard_Integer  Add (const gp_Pnt &Point) 
Adds a punctual constraint. More...  
Standard_Integer  Add (const Standard_Real U, const Standard_Real V, const TopoDS_Face &Support, const GeomAbs_Shape Order) 
Adds a punctual constraint. More...  
virtual void  Build () override 
Builds the resulting faces. More...  
virtual Standard_Boolean  IsDone () const override 
Tests whether computation of the filling plate has been completed. More...  
virtual const TopTools_ListOfShape &  Generated (const TopoDS_Shape &S) override 
Returns the list of shapes generated from the shape <S>. More...  
Standard_Real  G0Error () const 
Returns the maximum distance between the result and the constraints. This is set at construction time. More...  
Standard_Real  G1Error () const 
Returns the maximum angle between the result and the constraints. This is set at construction time. More...  
Standard_Real  G2Error () const 
Returns the maximum angle between the result and the constraints. This is set at construction time. More...  
Standard_Real  G0Error (const Standard_Integer Index) 
Returns the maximum distance attained between the result and the constraint Index. This is set at construction time. More...  
Standard_Real  G1Error (const Standard_Integer Index) 
Returns the maximum angle between the result and the constraints. This is set at construction time. More...  
Standard_Real  G2Error (const Standard_Integer Index) 
Returns the greatest difference in curvature found between the result and the constraint Index. More...  
Public Member Functions inherited from BRepBuilderAPI_MakeShape  
virtual const TopoDS_Shape &  Shape () 
Returns a shape built by the shape construction algorithm. Raises exception StdFail_NotDone if the shape was not built. More...  
operator TopoDS_Shape ()  
virtual const TopTools_ListOfShape &  Modified (const TopoDS_Shape &S) 
Returns the list of shapes modified from the shape <S>. More...  
virtual Standard_Boolean  IsDeleted (const TopoDS_Shape &S) 
Returns true if the shape S has been deleted. More...  
Public Member Functions inherited from BRepBuilderAPI_Command  
virtual  ~BRepBuilderAPI_Command () 
void  Check () const 
Raises NotDone if done is false. More...  
Additional Inherited Members  
Protected Member Functions inherited from BRepBuilderAPI_MakeShape  
BRepBuilderAPI_MakeShape ()  
Protected Member Functions inherited from BRepBuilderAPI_Command  
BRepBuilderAPI_Command ()  
Set done to False. More...  
void  Done () 
Set done to true. More...  
void  NotDone () 
Set done to false. More...  
Protected Attributes inherited from BRepBuilderAPI_MakeShape  
TopoDS_Shape  myShape 
TopTools_ListOfShape  myGenerated 
NSide Filling This algorithm avoids to build a face from:
The support surface of the face is computed by deformation of the initial surface in order to satisfy the given constraints. The set of bounding edges defines the wire of the face.
If no initial surface is given, the algorithm computes it automatically. If the set of edges is not connected (Free constraint) missing edges are automatically computed.
Limitations:
Other Applications:
BRepOffsetAPI_MakeFilling::BRepOffsetAPI_MakeFilling  (  const Standard_Integer  Degree = 3 , 
const Standard_Integer  NbPtsOnCur = 15 , 

const Standard_Integer  NbIter = 2 , 

const Standard_Boolean  Anisotropie = Standard_False , 

const Standard_Real  Tol2d = 0.00001 , 

const Standard_Real  Tol3d = 0.0001 , 

const Standard_Real  TolAng = 0.01 , 

const Standard_Real  TolCurv = 0.1 , 

const Standard_Integer  MaxDeg = 8 , 

const Standard_Integer  MaxSegments = 9 

) 
Constructs a wire filling object defined by.
Standard_Integer BRepOffsetAPI_MakeFilling::Add  (  const TopoDS_Edge &  Constr, 
const GeomAbs_Shape  Order,  
const Standard_Boolean  IsBound = Standard_True 

) 
Adds a new constraint which also defines an edge of the wire of the face Order: Order of the constraint: GeomAbs_C0 : the surface has to pass by 3D representation of the edge GeomAbs_G1 : the surface has to pass by 3D representation of the edge and to respect tangency with the first face of the edge GeomAbs_G2 : the surface has to pass by 3D representation of the edge and to respect tangency and curvature with the first face of the edge. Raises ConstructionError if the edge has no representation on a face and Order is GeomAbs_G1 or GeomAbs_G2.
Standard_Integer BRepOffsetAPI_MakeFilling::Add  (  const TopoDS_Edge &  Constr, 
const TopoDS_Face &  Support,  
const GeomAbs_Shape  Order,  
const Standard_Boolean  IsBound = Standard_True 

) 
Adds a new constraint which also defines an edge of the wire of the face Order: Order of the constraint: GeomAbs_C0 : the surface has to pass by 3D representation of the edge GeomAbs_G1 : the surface has to pass by 3D representation of the edge and to respect tangency with the given face GeomAbs_G2 : the surface has to pass by 3D representation of the edge and to respect tangency and curvature with the given face. Raises ConstructionError if the edge has no 2d representation on the given face.
Standard_Integer BRepOffsetAPI_MakeFilling::Add  (  const TopoDS_Face &  Support, 
const GeomAbs_Shape  Order  
) 
Adds a free constraint on a face. The corresponding edge has to be automatically recomputed. It is always a bound.
Standard_Integer BRepOffsetAPI_MakeFilling::Add  (  const gp_Pnt &  Point  ) 
Adds a punctual constraint.
Standard_Integer BRepOffsetAPI_MakeFilling::Add  (  const Standard_Real  U, 
const Standard_Real  V,  
const TopoDS_Face &  Support,  
const GeomAbs_Shape  Order  
) 
Adds a punctual constraint.

overridevirtual 
Builds the resulting faces.
Reimplemented from BRepBuilderAPI_MakeShape.
Standard_Real BRepOffsetAPI_MakeFilling::G0Error  (  )  const 
Returns the maximum distance between the result and the constraints. This is set at construction time.
Standard_Real BRepOffsetAPI_MakeFilling::G0Error  (  const Standard_Integer  Index  ) 
Returns the maximum distance attained between the result and the constraint Index. This is set at construction time.
Standard_Real BRepOffsetAPI_MakeFilling::G1Error  (  )  const 
Returns the maximum angle between the result and the constraints. This is set at construction time.
Standard_Real BRepOffsetAPI_MakeFilling::G1Error  (  const Standard_Integer  Index  ) 
Returns the maximum angle between the result and the constraints. This is set at construction time.
Standard_Real BRepOffsetAPI_MakeFilling::G2Error  (  )  const 
Returns the maximum angle between the result and the constraints. This is set at construction time.
Standard_Real BRepOffsetAPI_MakeFilling::G2Error  (  const Standard_Integer  Index  ) 
Returns the greatest difference in curvature found between the result and the constraint Index.

overridevirtual 
Returns the list of shapes generated from the shape <S>.
Reimplemented from BRepBuilderAPI_MakeShape.

overridevirtual 
Tests whether computation of the filling plate has been completed.
Reimplemented from BRepBuilderAPI_Command.
void BRepOffsetAPI_MakeFilling::LoadInitSurface  (  const TopoDS_Face &  Surf  ) 
Loads the initial surface Surf to begin the construction of the surface. This optional function is useful if the surface resulting from construction for the algorithm is likely to be complex. The support surface of the face under construction is computed by a deformation of Surf which satisfies the given constraints. The set of bounding edges defines the wire of the face. If no initial surface is given, the algorithm computes it automatically. If the set of edges is not connected (Free constraint), missing edges are automatically computed. Important: the initial surface must have orthogonal local coordinates, i.e. partial derivatives dS/du and dS/dv must be orthogonal at each point of surface. If this condition breaks, distortions of resulting surface are possible.
void BRepOffsetAPI_MakeFilling::SetApproxParam  (  const Standard_Integer  MaxDeg = 8 , 
const Standard_Integer  MaxSegments = 9 

) 
Sets the parameters used to approximate the filling surface. These include:
void BRepOffsetAPI_MakeFilling::SetConstrParam  (  const Standard_Real  Tol2d = 0.00001 , 
const Standard_Real  Tol3d = 0.0001 , 

const Standard_Real  TolAng = 0.01 , 

const Standard_Real  TolCurv = 0.1 

) 
Sets the values of Tolerances used to control the constraint. Tol2d: Tol3d: it is the maximum distance allowed between the support surface and the constraints TolAng: it is the maximum angle allowed between the normal of the surface and the constraints TolCurv: it is the maximum difference of curvature allowed between the surface and the constraint.
void BRepOffsetAPI_MakeFilling::SetResolParam  (  const Standard_Integer  Degree = 3 , 
const Standard_Integer  NbPtsOnCur = 15 , 

const Standard_Integer  NbIter = 2 , 

const Standard_Boolean  Anisotropie = Standard_False 

) 
Sets the parameters used for resolution. The default values of these parameters have been chosen for a good ratio quality/performance. Degree: it is the order of energy criterion to minimize for computing the deformation of the surface. The default value is 3 The recommanded value is i+2 where i is the maximum order of the constraints. NbPtsOnCur: it is the average number of points for discretisation of the edges. NbIter: it is the maximum number of iterations of the process. For each iteration the number of discretisation points is increased. Anisotropie: