Open CASCADE Technology  7.2.0
Public Member Functions
IFSelect_SessionPilot Class Reference

A SessionPilot is intended to make easier the use of a WorkSession. It receives commands, under alphanumeric form, then calls a library of Activators to interprete and run them. More...

#include <IFSelect_SessionPilot.hxx>

Inheritance diagram for IFSelect_SessionPilot:
Inheritance graph
[legend]

Public Member Functions

 IFSelect_SessionPilot (const Standard_CString prompt="")
 Creates an empty SessionPilot, with a prompt which will be displayed on querying commands. If not precised (""), this prompt is set to "Test-XSTEP>". More...
 
Handle< IFSelect_WorkSessionSession () const
 Returns the WorkSession which is worked on. More...
 
Handle< IFSelect_WorkLibraryLibrary () const
 Returns the WorKlibrary (Null if not set). WorkLibrary is used to Read and Write Files, according to the Norm. More...
 
Standard_Boolean RecordMode () const
 Returns the Record Mode for Commands. Default is False. More...
 
void SetSession (const Handle< IFSelect_WorkSession > &WS)
 Sets a WorkSession to be worked on. More...
 
void SetLibrary (const Handle< IFSelect_WorkLibrary > &WL)
 Sets a WorkLibrary. More...
 
void SetRecordMode (const Standard_Boolean mode)
 Changes the RecordMode. More...
 
void SetCommandLine (const TCollection_AsciiString &command)
 Sets the value of the Command Line to be interpreted Also prepares the interpretation (splitting by blanks) More...
 
const TCollection_AsciiStringCommandLine () const
 Returns the Command Line to be interpreted. More...
 
Standard_CString CommandPart (const Standard_Integer numarg=0) const
 Returns the part of the command line which begins at argument <numarg> between 0 and NbWords-1 (by default, all the line) Empty string if out of range. More...
 
Standard_Integer NbWords () const
 Returns the count of words of the Command Line, separated by blanks : 0 if empty, one if a command without args, else it gives the count of args minus one. Warning : limited to 10 (command title + 9 args) More...
 
const TCollection_AsciiStringWord (const Standard_Integer num) const
 Returns a word given its rank in the Command Line. Begins at 0 which is the Command Title, 1 is the 1st arg., etc... More...
 
Standard_CString Arg (const Standard_Integer num) const
 Returns a word given its rank, as a CString. As for Word, begins at 0 (the command name), etc... More...
 
Standard_Boolean RemoveWord (const Standard_Integer num)
 Removes a word given its rank. Returns True if Done, False if <num> is out of range. More...
 
Standard_Integer NbCommands () const
 Returns the count of recorded Commands. More...
 
const TCollection_AsciiStringCommand (const Standard_Integer num) const
 Returns a recorded Command, given its rank (from 1) More...
 
IFSelect_ReturnStatus RecordItem (const Handle< Standard_Transient > &item)
 Allows to associate a Transient Value with the last execution as a partial result Returns RetDone if item is not Null, RetFail if item is Null Remark : it is nullified for each Perform. More...
 
Handle< Standard_TransientRecordedItem () const
 Returns the Transient Object which was recorded with the current Line Command. If none was, returns a Null Handle. More...
 
void Clear ()
 Clears the recorded informations (commands, objects) More...
 
IFSelect_ReturnStatus ReadScript (const Standard_CString file="")
 Reads commands from a Script File, named <file>. By default (file = ""), reads from standard input with a prompt Else (reading from a file), the read commands are displayed onto standard output. Allows nested reads. Reading is stopped either by command x or exit, or by reaching end of file Return Value follows the rules of Do : RetEnd for normal end, RetFail if script could not be opened. More...
 
IFSelect_ReturnStatus Perform ()
 Executes the Command, itself (for built-in commands, which have priority) or by using the list of Activators. The value returned is : RetVoid if nothing done (void command) RetDone if execution OK, RetEnd if END OF SESSION, RetError if command unknown or incorrect, RetFail if error on execution If execution is OK and RecordMode is set, this Command Line is recorded to the list (see below). More...
 
IFSelect_ReturnStatus ExecuteAlias (const TCollection_AsciiString &aliasname)
 Executes the Commands, except that the command name (word 0) is aliased. The rest of the command line is unchanged If <alias> is empty, Executes with no change. More...
 
IFSelect_ReturnStatus Execute (const TCollection_AsciiString &command)
 Sets the Command then tries to execute it. Return value : same as for Perform. More...
 
IFSelect_ReturnStatus ExecuteCounter (const Handle< IFSelect_SignCounter > &counter, const Standard_Integer numword, const IFSelect_PrintCount mode=IFSelect_CountByItem)
 Executes a Counter in a general way If <numword> is greater than count of command words, it counts all the model. Else it considers the word <numword> as the identifier of a Selection <mode> gives the mode of printing results, default is CountByItem. More...
 
Standard_Integer Number (const Standard_CString val) const
 Interprets a string value as an entity number : if it gives an integer, returns its value else, considers it as ENtityLabel (preferably case sensitive) in case of failure, returns 0. More...
 
IFSelect_ReturnStatus Do (const Standard_Integer number, const Handle< IFSelect_SessionPilot > &session) override
 Processes specific commands, which are : x or exit for end of session ? or help for help messages xcommand to control command lines (Record Mode, List, Clear, File Output ...) xsource to execute a command file (no nesting allowed), in case of error, source is stopped and keyword recovers xstep is a simple prefix (useful in a wider environment, to avoid conflicts on command names) xset control commands which create items with names. More...
 
Standard_CString Help (const Standard_Integer number) const override
 Help for specific commands (apart from general command help) More...
 
- Public Member Functions inherited from IFSelect_Activator
void Add (const Standard_Integer number, const Standard_CString command) const
 Allows a self-definition by an Activator of the Commands it processes, call the class method Adding (mode 0) More...
 
void AddSet (const Standard_Integer number, const Standard_CString command) const
 Same as Add but specifies that this command is candidate for xset (creation of items, xset : named items; mode 1) More...
 
Standard_CString Group () const
 
Standard_CString File () const
 
void SetForGroup (const Standard_CString group, const Standard_CString file="")
 Group and SetGroup define a "Group of commands" which correspond to an Activator. Default is "XSTEP" Also a file may be attached. More...
 
- Public Member Functions inherited from Standard_Transient
 Standard_Transient ()
 Empty constructor. More...
 
 Standard_Transient (const Standard_Transient &)
 Copy constructor – does nothing. More...
 
Standard_Transientoperator= (const Standard_Transient &)
 Assignment operator, needed to avoid copying reference counter. More...
 
virtual ~Standard_Transient ()
 Destructor must be virtual. More...
 
virtual void Delete () const
 Memory deallocator for transient classes. More...
 
virtual const opencascade::handle< Standard_Type > & DynamicType () const
 Returns a type descriptor about this object. More...
 
Standard_Boolean IsInstance (const opencascade::handle< Standard_Type > &theType) const
 Returns a true value if this is an instance of Type. More...
 
Standard_Boolean IsInstance (const Standard_CString theTypeName) const
 Returns a true value if this is an instance of TypeName. More...
 
Standard_Boolean IsKind (const opencascade::handle< Standard_Type > &theType) const
 Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_Boolean IsKind (const Standard_CString theTypeName) const
 Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...
 
Standard_TransientThis () const
 Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...
 
Standard_Integer GetRefCount () const
 Get the reference counter of this object. More...
 
void IncrementRefCounter () const
 Increments the reference counter of this object. More...
 
Standard_Integer DecrementRefCounter () const
 Decrements the reference counter of this object; returns the decremented value. More...
 

Additional Inherited Members

- Public Types inherited from Standard_Transient
typedef void base_type
 Returns a type descriptor about this object. More...
 
- Static Public Member Functions inherited from IFSelect_Activator
static void Adding (const Handle< IFSelect_Activator > &actor, const Standard_Integer number, const Standard_CString command, const Standard_Integer mode)
 Records, in a Dictionary available for all the Activators, the command title an Activator can process, attached with its number, proper for this Activator <mode> allows to distinguish various execution modes 0: default mode; 1 : for xset. More...
 
static void Remove (const Standard_CString command)
 Removes a Command, if it is recorded (else, does nothing) More...
 
static Standard_Boolean Select (const Standard_CString command, Standard_Integer &number, Handle< IFSelect_Activator > &actor)
 Selects, for a Command given by its title, an actor with its command number. Returns True if found, False else. More...
 
static Standard_Integer Mode (const Standard_CString command)
 Returns mode recorded for a command. -1 if not found. More...
 
static Handle< TColStd_HSequenceOfAsciiString > Commands (const Standard_Integer mode=-1, const Standard_CString command="")
 Returns, for a root of command title, the list of possible commands. <mode> : -1 (D) for all commands if <commands> is empty -1 + command : about a Group , >= 0 see Adding By default, it returns the whole list of known commands. More...
 
- Static Public Member Functions inherited from Standard_Transient
static const char * get_type_name ()
 Returns a type descriptor about this object. More...
 
static const opencascade::handle< Standard_Type > & get_type_descriptor ()
 Returns type descriptor of Standard_Transient class. More...
 
- Protected Member Functions inherited from IFSelect_Activator
 IFSelect_Activator ()
 Sets the default values. More...
 

Detailed Description

A SessionPilot is intended to make easier the use of a WorkSession. It receives commands, under alphanumeric form, then calls a library of Activators to interprete and run them.

Then, WorkSession just records data required to work : Rules for Selection, Dispatch ... ; File Data (InterfaceModel and results of Evaluations and Transfer as required). SessionPilot records and works with alphanumeric commands and their results (under a very simple form). It calls a list of Activators to perform the actions.

A Command can have several forms :

Thus, to a specific Norm or way of working, only Activators change. A specific Initialisation can be done by starting with a specific set of commands.

In addition, SessionPilot is a sub-type of Activator, to recognize some built-in commands : exit/x, help/?, control of command line, and commands xstep xset ... See method Do

At least, empty lines and comment lines (beginning by '#') are skipped (comment lines are display if read from file)

Constructor & Destructor Documentation

◆ IFSelect_SessionPilot()

IFSelect_SessionPilot::IFSelect_SessionPilot ( const Standard_CString  prompt = "")

Creates an empty SessionPilot, with a prompt which will be displayed on querying commands. If not precised (""), this prompt is set to "Test-XSTEP>".

Member Function Documentation

◆ Arg()

Standard_CString IFSelect_SessionPilot::Arg ( const Standard_Integer  num) const

Returns a word given its rank, as a CString. As for Word, begins at 0 (the command name), etc...

◆ Clear()

void IFSelect_SessionPilot::Clear ( )

Clears the recorded informations (commands, objects)

◆ Command()

const TCollection_AsciiString& IFSelect_SessionPilot::Command ( const Standard_Integer  num) const

Returns a recorded Command, given its rank (from 1)

◆ CommandLine()

const TCollection_AsciiString& IFSelect_SessionPilot::CommandLine ( ) const

Returns the Command Line to be interpreted.

◆ CommandPart()

Standard_CString IFSelect_SessionPilot::CommandPart ( const Standard_Integer  numarg = 0) const

Returns the part of the command line which begins at argument <numarg> between 0 and NbWords-1 (by default, all the line) Empty string if out of range.

◆ Do()

IFSelect_ReturnStatus IFSelect_SessionPilot::Do ( const Standard_Integer  number,
const Handle< IFSelect_SessionPilot > &  session 
)
overridevirtual

Processes specific commands, which are : x or exit for end of session ? or help for help messages xcommand to control command lines (Record Mode, List, Clear, File Output ...) xsource to execute a command file (no nesting allowed), in case of error, source is stopped and keyword recovers xstep is a simple prefix (useful in a wider environment, to avoid conflicts on command names) xset control commands which create items with names.

Implements IFSelect_Activator.

◆ Execute()

IFSelect_ReturnStatus IFSelect_SessionPilot::Execute ( const TCollection_AsciiString command)

Sets the Command then tries to execute it. Return value : same as for Perform.

◆ ExecuteAlias()

IFSelect_ReturnStatus IFSelect_SessionPilot::ExecuteAlias ( const TCollection_AsciiString aliasname)

Executes the Commands, except that the command name (word 0) is aliased. The rest of the command line is unchanged If <alias> is empty, Executes with no change.

Error status is returned if the alias is unknown as command

◆ ExecuteCounter()

IFSelect_ReturnStatus IFSelect_SessionPilot::ExecuteCounter ( const Handle< IFSelect_SignCounter > &  counter,
const Standard_Integer  numword,
const IFSelect_PrintCount  mode = IFSelect_CountByItem 
)

Executes a Counter in a general way If <numword> is greater than count of command words, it counts all the model. Else it considers the word <numword> as the identifier of a Selection <mode> gives the mode of printing results, default is CountByItem.

◆ Help()

Standard_CString IFSelect_SessionPilot::Help ( const Standard_Integer  number) const
overridevirtual

Help for specific commands (apart from general command help)

Implements IFSelect_Activator.

◆ Library()

Handle< IFSelect_WorkLibrary > IFSelect_SessionPilot::Library ( ) const

Returns the WorKlibrary (Null if not set). WorkLibrary is used to Read and Write Files, according to the Norm.

◆ NbCommands()

Standard_Integer IFSelect_SessionPilot::NbCommands ( ) const

Returns the count of recorded Commands.

◆ NbWords()

Standard_Integer IFSelect_SessionPilot::NbWords ( ) const

Returns the count of words of the Command Line, separated by blanks : 0 if empty, one if a command without args, else it gives the count of args minus one. Warning : limited to 10 (command title + 9 args)

◆ Number()

Standard_Integer IFSelect_SessionPilot::Number ( const Standard_CString  val) const

Interprets a string value as an entity number : if it gives an integer, returns its value else, considers it as ENtityLabel (preferably case sensitive) in case of failure, returns 0.

◆ Perform()

IFSelect_ReturnStatus IFSelect_SessionPilot::Perform ( )

Executes the Command, itself (for built-in commands, which have priority) or by using the list of Activators. The value returned is : RetVoid if nothing done (void command) RetDone if execution OK, RetEnd if END OF SESSION, RetError if command unknown or incorrect, RetFail if error on execution If execution is OK and RecordMode is set, this Command Line is recorded to the list (see below).

◆ ReadScript()

IFSelect_ReturnStatus IFSelect_SessionPilot::ReadScript ( const Standard_CString  file = "")

Reads commands from a Script File, named <file>. By default (file = ""), reads from standard input with a prompt Else (reading from a file), the read commands are displayed onto standard output. Allows nested reads. Reading is stopped either by command x or exit, or by reaching end of file Return Value follows the rules of Do : RetEnd for normal end, RetFail if script could not be opened.

◆ RecordedItem()

Handle< Standard_Transient > IFSelect_SessionPilot::RecordedItem ( ) const

Returns the Transient Object which was recorded with the current Line Command. If none was, returns a Null Handle.

◆ RecordItem()

IFSelect_ReturnStatus IFSelect_SessionPilot::RecordItem ( const Handle< Standard_Transient > &  item)

Allows to associate a Transient Value with the last execution as a partial result Returns RetDone if item is not Null, RetFail if item is Null Remark : it is nullified for each Perform.

◆ RecordMode()

Standard_Boolean IFSelect_SessionPilot::RecordMode ( ) const

Returns the Record Mode for Commands. Default is False.

◆ RemoveWord()

Standard_Boolean IFSelect_SessionPilot::RemoveWord ( const Standard_Integer  num)

Removes a word given its rank. Returns True if Done, False if <num> is out of range.

◆ Session()

Handle< IFSelect_WorkSession > IFSelect_SessionPilot::Session ( ) const

Returns the WorkSession which is worked on.

◆ SetCommandLine()

void IFSelect_SessionPilot::SetCommandLine ( const TCollection_AsciiString command)

Sets the value of the Command Line to be interpreted Also prepares the interpretation (splitting by blanks)

◆ SetLibrary()

void IFSelect_SessionPilot::SetLibrary ( const Handle< IFSelect_WorkLibrary > &  WL)

Sets a WorkLibrary.

◆ SetRecordMode()

void IFSelect_SessionPilot::SetRecordMode ( const Standard_Boolean  mode)

Changes the RecordMode.

◆ SetSession()

void IFSelect_SessionPilot::SetSession ( const Handle< IFSelect_WorkSession > &  WS)

Sets a WorkSession to be worked on.

◆ Word()

const TCollection_AsciiString& IFSelect_SessionPilot::Word ( const Standard_Integer  num) const

Returns a word given its rank in the Command Line. Begins at 0 which is the Command Title, 1 is the 1st arg., etc...


The documentation for this class was generated from the following file: