extension of the class TopOpeBRepBuild_Builder dedicated to avoid bugs in "Rebuilding Result" algorithm for the case of SOLID/SOLID Boolean Operations More...

#include <TopOpeBRepBuild_Builder1.hxx>

Inheritance diagram for TopOpeBRepBuild_Builder1:

[legend]

Public Member Functions
	TopOpeBRepBuild_Builder1 (const TopOpeBRepDS_BuildTool &BT)

virtual	~TopOpeBRepBuild_Builder1 ()

virtual void	Clear () override
	Removes all splits and merges already performed. Does NOT clear the handled DS (except ShapeWithStatesMaps). More...

virtual void	Perform (const Handle< TopOpeBRepDS_HDataStructure > &HDS) override
	Stores the data structure <HDS>, Create shapes from the new geometries. More...

virtual void	Perform (const Handle< TopOpeBRepDS_HDataStructure > &HDS, const TopoDS_Shape &S1, const TopoDS_Shape &S2) override
	Stores the data structure <HDS>, Create shapes from the new geometries, Evaluates if an operation performed on shapes S1,S2 is a particular case. More...

virtual void	MergeKPart () override

virtual void	MergeKPart (const TopAbs_State TB1, const TopAbs_State TB2) override

virtual void	GFillSolidSFS (const TopoDS_Shape &SO1, const TopTools_ListOfShape &LSO2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS) override

virtual void	GFillShellSFS (const TopoDS_Shape &SH1, const TopTools_ListOfShape &LSO2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS) override

virtual void	GWESMakeFaces (const TopoDS_Shape &FF, TopOpeBRepBuild_WireEdgeSet &WES, TopTools_ListOfShape &LOF) override

void	GFillSplitsPVS (const TopoDS_Shape &anEdge, const TopOpeBRepBuild_GTopo &G1, TopOpeBRepBuild_PaveSet &PVS)

void	GFillFaceNotSameDomSFS (const TopoDS_Shape &F1, const TopTools_ListOfShape &LSO2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS)

void	GFillFaceNotSameDomWES (const TopoDS_Shape &F1, const TopTools_ListOfShape &LSO2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GFillWireNotSameDomWES (const TopoDS_Shape &W1, const TopTools_ListOfShape &LSO2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GFillEdgeNotSameDomWES (const TopoDS_Shape &E1, const TopTools_ListOfShape &LSO2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GFillFaceSameDomSFS (const TopoDS_Shape &F1, const TopTools_ListOfShape &LSO2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS)

void	GFillFaceSameDomWES (const TopoDS_Shape &F1, const TopTools_ListOfShape &LSO2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GFillWireSameDomWES (const TopoDS_Shape &W1, const TopTools_ListOfShape &LSO2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GFillEdgeSameDomWES (const TopoDS_Shape &E1, const TopTools_ListOfShape &LSO2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	PerformONParts (const TopoDS_Shape &F, const TopTools_IndexedMapOfShape &SDfaces, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	PerformPieceIn2D (const TopoDS_Edge &aPieceToPerform, const TopoDS_Edge &aOriginalEdge, const TopoDS_Face &edgeFace, const TopoDS_Face &toFace, const TopOpeBRepBuild_GTopo &G, Standard_Boolean &keep)

Standard_Integer	PerformPieceOn2D (const TopoDS_Shape &aPieceObj, const TopoDS_Shape &aFaceObj, const TopoDS_Shape &aEdgeObj, TopTools_ListOfShape &aListOfPieces, TopTools_ListOfShape &aListOfFaces, TopTools_ListOfShape &aListOfPiecesOut2d)

Standard_Integer	TwoPiecesON (const TopTools_SequenceOfShape &aSeq, TopTools_ListOfShape &aListOfPieces, TopTools_ListOfShape &aListOfFaces, TopTools_ListOfShape &aListOfPiecesOut2d)

Standard_Integer	CorrectResult2d (TopoDS_Shape &aResult)

Public Member Functions inherited from TopOpeBRepBuild_Builder
	TopOpeBRepBuild_Builder (const TopOpeBRepDS_BuildTool &BT)

virtual	~TopOpeBRepBuild_Builder ()

TopOpeBRepDS_BuildTool &	ChangeBuildTool ()

const TopOpeBRepDS_BuildTool &	BuildTool () const

Handle< TopOpeBRepDS_HDataStructure >	DataStructure () const
	returns the DS handled by this builder More...

void	MergeEdges (const TopTools_ListOfShape &L1, const TopAbs_State TB1, const TopTools_ListOfShape &L2, const TopAbs_State TB2, const Standard_Boolean onA=Standard_False, const Standard_Boolean onB=Standard_False, const Standard_Boolean onAB=Standard_False)
	Merges the two edges <S1> and <S2> keeping the parts in each edge of states <TB1> and <TB2>. Booleans onA, onB, onAB indicate wheter parts of edges found as state ON respectively on first, second, and both shapes must be (or not) built. More...

void	MergeFaces (const TopTools_ListOfShape &S1, const TopAbs_State TB1, const TopTools_ListOfShape &S2, const TopAbs_State TB2, const Standard_Boolean onA=Standard_False, const Standard_Boolean onB=Standard_False, const Standard_Boolean onAB=Standard_False)
	Merges the two faces <S1> and <S2> keeping the parts in each face of states <TB1> and <TB2>. More...

void	MergeSolids (const TopoDS_Shape &S1, const TopAbs_State TB1, const TopoDS_Shape &S2, const TopAbs_State TB2)
	Merges the two solids <S1> and <S2> keeping the parts in each solid of states <TB1> and <TB2>. More...

void	MergeShapes (const TopoDS_Shape &S1, const TopAbs_State TB1, const TopoDS_Shape &S2, const TopAbs_State TB2)
	Merges the two shapes <S1> and <S2> keeping the parts of states <TB1>,<TB2> in <S1>,<S2>. More...

void	End ()

Standard_Boolean	Classify () const

void	ChangeClassify (const Standard_Boolean B)

void	MergeSolid (const TopoDS_Shape &S, const TopAbs_State TB)
	Merges the solid <S> keeping the parts of state <TB>. More...

const TopoDS_Shape &	NewVertex (const Standard_Integer I) const
	Returns the vertex created on point . More...

const TopTools_ListOfShape &	NewEdges (const Standard_Integer I) const
	Returns the edges created on curve . More...

const TopTools_ListOfShape &	NewFaces (const Standard_Integer I) const
	Returns the faces created on surface . More...

Standard_Boolean	IsSplit (const TopoDS_Shape &S, const TopAbs_State TB) const
	Returns True if the shape <S> has been split. More...

const TopTools_ListOfShape &	Splits (const TopoDS_Shape &S, const TopAbs_State TB) const
	Returns the split parts <TB> of shape <S>. More...

Standard_Boolean	IsMerged (const TopoDS_Shape &S, const TopAbs_State TB) const
	Returns True if the shape <S> has been merged. More...

const TopTools_ListOfShape &	Merged (const TopoDS_Shape &S, const TopAbs_State TB) const
	Returns the merged parts <TB> of shape <S>. More...

void	InitSection ()

void	SplitSectionEdges ()
	create parts ON solid of section edges More...

virtual void	SplitSectionEdge (const TopoDS_Shape &E)
	create parts ON solid of section edges More...

void	SectionCurves (TopTools_ListOfShape &L)
	return the section edges built on new curves. More...

void	SectionEdges (TopTools_ListOfShape &L)
	return the parts of edges found ON the boundary of the two arguments S1,S2 of Perform() More...

void	FillSecEdgeAncestorMap (const Standard_Integer aShapeRank, const TopTools_MapOfShape &aMapON, TopTools_DataMapOfShapeShape &anAncMap) const
	Fills anAncMap with pairs (edge,ancestor edge) for each split from the map aMapON for the shape object identified by ShapeRank. More...

void	Section (TopTools_ListOfShape &L)
	return all section edges. More...

const TopTools_ListOfShape &	Section ()

void	BuildVertices (const Handle< TopOpeBRepDS_HDataStructure > &DS)
	update the DS by creating new geometries. create vertices on DS points. More...

void	BuildEdges (const Handle< TopOpeBRepDS_HDataStructure > &DS)
	update the DS by creating new geometries. create shapes from the new geometries. More...

const TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State &	MSplit (const TopAbs_State s) const

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State &	ChangeMSplit (const TopAbs_State s)

void	MakeEdges (const TopoDS_Shape &E, TopOpeBRepBuild_EdgeBuilder &B, TopTools_ListOfShape &L)

void	MakeFaces (const TopoDS_Shape &F, TopOpeBRepBuild_FaceBuilder &B, TopTools_ListOfShape &L)

void	MakeSolids (TopOpeBRepBuild_SolidBuilder &B, TopTools_ListOfShape &L)

void	MakeShells (TopOpeBRepBuild_SolidBuilder &B, TopTools_ListOfShape &L)

TopTools_ListOfShape &	ChangeSplit (const TopoDS_Shape &S, const TopAbs_State TB)
	Returns a ref.on the list of shapes connected to <S> as <TB> split parts of <S>. Mark <S> as split in <TB> parts. More...

Standard_Boolean	Opec12 () const

Standard_Boolean	Opec21 () const

Standard_Boolean	Opecom () const

Standard_Boolean	Opefus () const

TopAbs_State	ShapePosition (const TopoDS_Shape &S, const TopTools_ListOfShape &LS)

Standard_Boolean	KeepShape (const TopoDS_Shape &S, const TopTools_ListOfShape &LS, const TopAbs_State T)

void	FindSameDomain (TopTools_ListOfShape &L1, TopTools_ListOfShape &L2) const

void	FindSameDomainSameOrientation (TopTools_ListOfShape &LSO, TopTools_ListOfShape &LDO) const

void	MapShapes (const TopoDS_Shape &S1, const TopoDS_Shape &S2)

void	ClearMaps ()

void	FindSameRank (const TopTools_ListOfShape &L1, const Standard_Integer R, TopTools_ListOfShape &L2) const

Standard_Integer	ShapeRank (const TopoDS_Shape &S) const

Standard_Boolean	IsShapeOf (const TopoDS_Shape &S, const Standard_Integer I12) const

Standard_Integer	FindIsKPart ()

Standard_Integer	IsKPart () const

void	MergeKPartiskole ()

void	MergeKPartiskoletge ()

void	MergeKPartisdisj ()

void	MergeKPartisfafa ()

void	MergeKPartissoso ()

Standard_Integer	KPiskole ()

Standard_Integer	KPiskoletge ()

Standard_Integer	KPisdisj ()

Standard_Integer	KPisfafa ()

Standard_Integer	KPissoso ()

void	KPClearMaps ()

Standard_Integer	KPlhg (const TopoDS_Shape &S, const TopAbs_ShapeEnum T, TopTools_ListOfShape &L) const

Standard_Integer	KPlhg (const TopoDS_Shape &S, const TopAbs_ShapeEnum T) const

Standard_Integer	KPlhsd (const TopoDS_Shape &S, const TopAbs_ShapeEnum T, TopTools_ListOfShape &L) const

Standard_Integer	KPlhsd (const TopoDS_Shape &S, const TopAbs_ShapeEnum T) const

TopAbs_State	KPclasSS (const TopoDS_Shape &S1, const TopTools_ListOfShape &exceptLS1, const TopoDS_Shape &S2)

TopAbs_State	KPclasSS (const TopoDS_Shape &S1, const TopoDS_Shape &exceptS1, const TopoDS_Shape &S2)

TopAbs_State	KPclasSS (const TopoDS_Shape &S1, const TopoDS_Shape &S2)

Standard_Boolean	KPiskolesh (const TopoDS_Shape &S, TopTools_ListOfShape &LS, TopTools_ListOfShape &LF) const

Standard_Boolean	KPiskoletgesh (const TopoDS_Shape &S, TopTools_ListOfShape &LS, TopTools_ListOfShape &LF) const

void	KPSameDomain (TopTools_ListOfShape &L1, TopTools_ListOfShape &L2) const

Standard_Integer	KPisdisjsh (const TopoDS_Shape &S) const

Standard_Integer	KPisfafash (const TopoDS_Shape &S) const

Standard_Integer	KPissososh (const TopoDS_Shape &S) const

void	KPiskoleanalyse (const TopAbs_State FT1, const TopAbs_State FT2, const TopAbs_State ST1, const TopAbs_State ST2, Standard_Integer &I, Standard_Integer &I1, Standard_Integer &I2) const

void	KPiskoletgeanalyse (const TopOpeBRepDS_Config Conf, const TopAbs_State ST1, const TopAbs_State ST2, Standard_Integer &I) const

void	KPisdisjanalyse (const TopAbs_State ST1, const TopAbs_State ST2, Standard_Integer &I, Standard_Integer &IC1, Standard_Integer &IC2) const

TopAbs_State	KPclassF (const TopoDS_Shape &F1, const TopoDS_Shape &F2)

void	KPclassFF (const TopoDS_Shape &F1, const TopoDS_Shape &F2, TopAbs_State &T1, TopAbs_State &T2)

Standard_Boolean	KPiskoleFF (const TopoDS_Shape &F1, const TopoDS_Shape &F2, TopAbs_State &T1, TopAbs_State &T2)

TopoDS_Shape	KPmakeface (const TopoDS_Shape &F1, const TopTools_ListOfShape &LF2, const TopAbs_State T1, const TopAbs_State T2, const Standard_Boolean R1, const Standard_Boolean R2)

void	SplitEvisoONperiodicF ()

void	GMergeSolids (const TopTools_ListOfShape &LSO1, const TopTools_ListOfShape &LSO2, const TopOpeBRepBuild_GTopo &G)

void	GFillSolidsSFS (const TopTools_ListOfShape &LSO1, const TopTools_ListOfShape &LSO2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS)

void	GFillSurfaceTopologySFS (const TopoDS_Shape &SO1, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS)

void	GFillSurfaceTopologySFS (const TopOpeBRepDS_SurfaceIterator &IT, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS) const

void	GFillFaceSFS (const TopoDS_Shape &F1, const TopTools_ListOfShape &LSO2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS)

void	GSplitFaceSFS (const TopoDS_Shape &F1, const TopTools_ListOfShape &LSclass, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS)

void	GMergeFaceSFS (const TopoDS_Shape &F, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS)

void	GSplitFace (const TopoDS_Shape &F, const TopOpeBRepBuild_GTopo &G, const TopTools_ListOfShape &LSclass)

void	AddONPatchesSFS (const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_ShellFaceSet &SFS)

void	FillOnPatches (const TopTools_ListOfShape &anEdgesON, const TopoDS_Shape &aBaseFace, const TopTools_IndexedMapOfOrientedShape &avoidMap)

void	FindFacesTouchingEdge (const TopoDS_Shape &aFace, const TopoDS_Shape &anEdge, const Standard_Integer aShRank, TopTools_ListOfShape &aFaces) const

void	GMergeFaces (const TopTools_ListOfShape &LF1, const TopTools_ListOfShape &LF2, const TopOpeBRepBuild_GTopo &G)

void	GFillFacesWES (const TopTools_ListOfShape &LF1, const TopTools_ListOfShape &LF2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GFillFacesWESK (const TopTools_ListOfShape &LF1, const TopTools_ListOfShape &LF2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES, const Standard_Integer K)

void	GFillFacesWESMakeFaces (const TopTools_ListOfShape &LF1, const TopTools_ListOfShape &LF2, const TopTools_ListOfShape &LSO, const TopOpeBRepBuild_GTopo &G)

void	GFillFaceWES (const TopoDS_Shape &F, const TopTools_ListOfShape &LF2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GFillCurveTopologyWES (const TopoDS_Shape &F, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GFillCurveTopologyWES (const TopOpeBRepDS_CurveIterator &IT, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES) const

void	GFillONPartsWES (const TopoDS_Shape &F, const TopOpeBRepBuild_GTopo &G, const TopTools_ListOfShape &LSclass, TopOpeBRepBuild_WireEdgeSet &WES)

void	GFillWireWES (const TopoDS_Shape &W, const TopTools_ListOfShape &LF2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GFillEdgeWES (const TopoDS_Shape &E, const TopTools_ListOfShape &LF2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GSplitEdgeWES (const TopoDS_Shape &E, const TopTools_ListOfShape &LF2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GMergeEdgeWES (const TopoDS_Shape &E, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_WireEdgeSet &WES)

void	GSplitEdge (const TopoDS_Shape &E, const TopOpeBRepBuild_GTopo &G, const TopTools_ListOfShape &LSclass)

void	GMergeEdges (const TopTools_ListOfShape &LE1, const TopTools_ListOfShape &LE2, const TopOpeBRepBuild_GTopo &G)

void	GFillEdgesPVS (const TopTools_ListOfShape &LE1, const TopTools_ListOfShape &LE2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_PaveSet &PVS)

void	GFillEdgePVS (const TopoDS_Shape &E, const TopTools_ListOfShape &LE2, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_PaveSet &PVS)

void	GFillPointTopologyPVS (const TopoDS_Shape &E, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_PaveSet &PVS)

void	GFillPointTopologyPVS (const TopoDS_Shape &E, const TopOpeBRepDS_PointIterator &IT, const TopOpeBRepBuild_GTopo &G, TopOpeBRepBuild_PaveSet &PVS) const

Standard_Boolean	GParamOnReference (const TopoDS_Vertex &V, const TopoDS_Edge &E, Standard_Real &P) const

Standard_Boolean	GKeepShape (const TopoDS_Shape &S, const TopTools_ListOfShape &Lref, const TopAbs_State T)

Standard_Boolean	GKeepShape1 (const TopoDS_Shape &S, const TopTools_ListOfShape &Lref, const TopAbs_State T, TopAbs_State &pos)
	return True if S is classified <T> / Lref shapes More...

void	GKeepShapes (const TopoDS_Shape &S, const TopTools_ListOfShape &Lref, const TopAbs_State T, const TopTools_ListOfShape &Lin, TopTools_ListOfShape &Lou)
	add to Lou the shapes of Lin classified <T> / Lref shapes. Lou is not cleared. (S is a dummy trace argument) More...

void	GSFSMakeSolids (const TopoDS_Shape &SOF, TopOpeBRepBuild_ShellFaceSet &SFS, TopTools_ListOfShape &LOSO)

void	GSOBUMakeSolids (const TopoDS_Shape &SOF, TopOpeBRepBuild_SolidBuilder &SOBU, TopTools_ListOfShape &LOSO)

void	GFABUMakeFaces (const TopoDS_Shape &FF, TopOpeBRepBuild_FaceBuilder &FABU, TopTools_ListOfShape &LOF, TopTools_DataMapOfShapeInteger &MWisOld)

void	RegularizeFaces (const TopoDS_Shape &FF, const TopTools_ListOfShape &lnewFace, TopTools_ListOfShape &LOF)

void	RegularizeFace (const TopoDS_Shape &FF, const TopoDS_Shape &newFace, TopTools_ListOfShape &LOF)

void	RegularizeSolids (const TopoDS_Shape &SS, const TopTools_ListOfShape &lnewSolid, TopTools_ListOfShape &LOS)

void	RegularizeSolid (const TopoDS_Shape &SS, const TopoDS_Shape &newSolid, TopTools_ListOfShape &LOS)

void	GPVSMakeEdges (const TopoDS_Shape &EF, TopOpeBRepBuild_PaveSet &PVS, TopTools_ListOfShape &LOE) const

void	GEDBUMakeEdges (const TopoDS_Shape &EF, TopOpeBRepBuild_EdgeBuilder &EDBU, TopTools_ListOfShape &LOE) const

Standard_Boolean	GToSplit (const TopoDS_Shape &S, const TopAbs_State TB) const

Standard_Boolean	GToMerge (const TopoDS_Shape &S) const

void	GFindSamDom (const TopoDS_Shape &S, TopTools_ListOfShape &L1, TopTools_ListOfShape &L2) const

void	GFindSamDom (TopTools_ListOfShape &L1, TopTools_ListOfShape &L2) const

void	GFindSamDomSODO (const TopoDS_Shape &S, TopTools_ListOfShape &LSO, TopTools_ListOfShape &LDO) const

void	GFindSamDomSODO (TopTools_ListOfShape &LSO, TopTools_ListOfShape &LDO) const

void	GMapShapes (const TopoDS_Shape &S1, const TopoDS_Shape &S2)

void	GClearMaps ()

void	GFindSameRank (const TopTools_ListOfShape &L1, const Standard_Integer R, TopTools_ListOfShape &L2) const

Standard_Integer	GShapeRank (const TopoDS_Shape &S) const

Standard_Boolean	GIsShapeOf (const TopoDS_Shape &S, const Standard_Integer I12) const

void	GdumpLS (const TopTools_ListOfShape &L) const

void	GdumpSHA (const TopoDS_Shape &S, const Standard_Address str=NULL) const

void	GdumpSHAORI (const TopoDS_Shape &S, const Standard_Address str=NULL) const

void	GdumpSHAORIGEO (const TopoDS_Shape &S, const Standard_Address str=NULL) const

void	GdumpSHASTA (const Standard_Integer iS, const TopAbs_State T, const TCollection_AsciiString &a="", const TCollection_AsciiString &b="") const

void	GdumpSHASTA (const TopoDS_Shape &S, const TopAbs_State T, const TCollection_AsciiString &a="", const TCollection_AsciiString &b="") const

void	GdumpSHASTA (const Standard_Integer iS, const TopAbs_State T, const TopOpeBRepBuild_ShapeSet &SS, const TCollection_AsciiString &a="", const TCollection_AsciiString &b="", const TCollection_AsciiString &c="\) const

void	GdumpEDG (const TopoDS_Shape &S, const Standard_Address str=NULL) const

void	GdumpEDGVER (const TopoDS_Shape &E, const TopoDS_Shape &V, const Standard_Address str=NULL) const

void	GdumpSAMDOM (const TopTools_ListOfShape &L, const Standard_Address str=NULL) const

void	GdumpEXP (const TopOpeBRepTool_ShapeExplorer &E) const

void	GdumpSOBU (TopOpeBRepBuild_SolidBuilder &SB) const

void	GdumpFABU (TopOpeBRepBuild_FaceBuilder &FB) const

void	GdumpEDBU (TopOpeBRepBuild_EdgeBuilder &EB) const

Standard_Boolean	GtraceSPS (const Standard_Integer iS) const

Standard_Boolean	GtraceSPS (const Standard_Integer iS, const Standard_Integer jS) const

Standard_Boolean	GtraceSPS (const TopoDS_Shape &S) const

Standard_Boolean	GtraceSPS (const TopoDS_Shape &S, Standard_Integer &IS) const

void	GdumpSHASETreset ()

Standard_Integer	GdumpSHASETindex ()

Protected Member Functions
void	PerformShapeWithStates ()

void	PerformShapeWithStates (const TopoDS_Shape &anObj, const TopoDS_Shape &aTool)

void	StatusEdgesToSplit (const TopoDS_Shape &anObj, const TopTools_IndexedMapOfShape &anEdgesToSplitMap, const TopTools_IndexedMapOfShape &anEdgesToRestMap)

void	SplitEdge (const TopoDS_Shape &anEdge, TopTools_ListOfShape &aLNew, TopOpeBRepDS_DataMapOfShapeState &aDataMapOfShapeState)

void	PerformFacesWithStates (const TopoDS_Shape &anObj, const TopTools_IndexedMapOfShape &aFaces, TopOpeBRepDS_DataMapOfShapeState &aSplF)

Standard_Integer	IsSame2d (const TopTools_SequenceOfShape &aSeq, TopTools_ListOfShape &aListOfPiecesOut2d)

void	OrientateEdgeOnFace (TopoDS_Edge &EdgeToPerform, const TopoDS_Face &baseFace, const TopoDS_Face &edgeFace, const TopOpeBRepBuild_GTopo &G1, Standard_Boolean &stateOfFaceOri) const

Protected Member Functions inherited from TopOpeBRepBuild_Builder
void	BuildEdges (const Standard_Integer iC, const Handle< TopOpeBRepDS_HDataStructure > &DS)
	update the DS by creating new geometries. create edges on the new curve <Icurv>. More...

void	BuildFaces (const Standard_Integer iS, const Handle< TopOpeBRepDS_HDataStructure > &DS)
	update the DS by creating new geometries. create faces on the new surface <ISurf>. More...

void	BuildFaces (const Handle< TopOpeBRepDS_HDataStructure > &DS)
	update the DS by creating new geometries. create shapes from the new geometries. More...

void	SplitEdge (const TopoDS_Shape &E1, const TopAbs_State TB1, const TopAbs_State TB2)
	Split <E1> keeping the parts of state <TB1>. More...

void	SplitEdge1 (const TopoDS_Shape &E1, const TopAbs_State TB1, const TopAbs_State TB2)
	Split <E1> keeping the parts of state <TB1>. More...

void	SplitEdge2 (const TopoDS_Shape &E1, const TopAbs_State TB1, const TopAbs_State TB2)
	Split <E1> keeping the parts of state <TB1>. More...

void	SplitFace (const TopoDS_Shape &F1, const TopAbs_State TB1, const TopAbs_State TB2)
	Split <F1> keeping the parts of state <TB1>. Merge faces with same domain, keeping parts of state <TB2>. More...

void	SplitFace1 (const TopoDS_Shape &F1, const TopAbs_State TB1, const TopAbs_State TB2)

void	SplitFace2 (const TopoDS_Shape &F1, const TopAbs_State TB1, const TopAbs_State TB2)

void	SplitSolid (const TopoDS_Shape &S1, const TopAbs_State TB1, const TopAbs_State TB2)
	Split <S1> keeping the parts of state <TB1>. More...

void	SplitShapes (TopOpeBRepTool_ShapeExplorer &Ex, const TopAbs_State TB1, const TopAbs_State TB2, TopOpeBRepBuild_ShapeSet &SS, const Standard_Boolean RevOri)
	Explore shapes of given by explorer <Ex> to split them. Store new shapes in the set <SS>. According to RevOri, reverse or not their orientation. More...

void	FillFace (const TopoDS_Shape &F1, const TopAbs_State TB1, const TopTools_ListOfShape &LF2, const TopAbs_State TB2, TopOpeBRepBuild_WireEdgeSet &WES, const Standard_Boolean RevOri)
	Split edges of <F1> and store wires and edges in the set <WES>. According to RevOri, reverse (or not) orientation. More...

void	FillSolid (const TopoDS_Shape &S1, const TopAbs_State TB1, const TopTools_ListOfShape &LS2, const TopAbs_State TB2, TopOpeBRepBuild_ShapeSet &SS, const Standard_Boolean RevOri)
	Split faces of <S1> and store shells and faces in the set <SS>. According to RevOri, reverse (or not) orientation. More...

void	FillShape (const TopoDS_Shape &S1, const TopAbs_State TB1, const TopTools_ListOfShape &LS2, const TopAbs_State TB2, TopOpeBRepBuild_ShapeSet &SS, const Standard_Boolean RevOri)
	Split subshapes of <S1> and store subshapes in the set <SS>. According to RevOri, reverse (or not) orientation. More...

void	FillVertexSet (TopOpeBRepDS_PointIterator &IT, const TopAbs_State TB, TopOpeBRepBuild_PaveSet &PVS) const
	fills the vertex set PVS with the point iterator IT. IT accesses a list of interferences which geometry is a point or a vertex. TB indicates the orientation to give to the geometries found in interference list accessed by IT. More...

void	FillVertexSetOnValue (const TopOpeBRepDS_PointIterator &IT, const TopAbs_State TB, TopOpeBRepBuild_PaveSet &PVS) const
	fills vertex set PVS with the current value of IT. I geometry is a point or a vertex. TB indicates the orientation to give to geometries found I More...

Standard_Boolean	ToSplit (const TopoDS_Shape &S, const TopAbs_State TB) const
	Returns True if the shape <S> has not already been split. More...

void	MarkSplit (const TopoDS_Shape &S, const TopAbs_State TB, const Standard_Boolean B=Standard_True)
	add the shape <S> to the map of split shapes. mark <S> as split/not split on <state>, according to B value. More...

TopTools_ListOfShape &	ChangeMerged (const TopoDS_Shape &S, const TopAbs_State TB)
	Returns a ref. on the list of shapes connected to <S> as <TB> merged parts of <S>. More...

TopoDS_Shape &	ChangeNewVertex (const Standard_Integer I)
	Returns a ref. on the vertex created on point . More...

TopTools_ListOfShape &	ChangeNewEdges (const Standard_Integer I)
	Returns a ref. on the list of edges created on curve . More...

TopTools_ListOfShape &	ChangeNewFaces (const Standard_Integer I)
	Returns a ref. on the list of faces created on surface . More...

void	AddIntersectionEdges (TopoDS_Shape &F, const TopAbs_State TB, const Standard_Boolean RevOri, TopOpeBRepBuild_ShapeSet &ES) const

void	UpdateSplitAndMerged (const TopTools_DataMapOfIntegerListOfShape &mle, const TopTools_DataMapOfIntegerShape &mre, const TopTools_DataMapOfShapeShape &mlf, const TopAbs_State state)

Protected Attributes
TopTools_DataMapOfShapeListOfShape	myFSplits

TopTools_DataMapOfShapeListOfShape	myESplits

Protected Attributes inherited from TopOpeBRepBuild_Builder
TopAbs_State	myState1

TopAbs_State	myState2

TopoDS_Shape	myShape1

TopoDS_Shape	myShape2

Handle< TopOpeBRepDS_HDataStructure >	myDataStructure

TopOpeBRepDS_BuildTool	myBuildTool

Handle< TopTools_HArray1OfShape >	myNewVertices

TopTools_DataMapOfIntegerListOfShape	myNewEdges

Handle< TopTools_HArray1OfListOfShape >	myNewFaces

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State	mySplitIN

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State	mySplitON

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State	mySplitOUT

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State	myMergedIN

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State	myMergedON

TopOpeBRepDS_DataMapOfShapeListOfShapeOn1State	myMergedOUT

TopTools_ListOfShape	myEmptyShapeList

TopTools_ListOfShape	myListOfSolid

TopTools_ListOfShape	myListOfFace

TopTools_ListOfShape	myListOfEdge

TopTools_DataMapOfShapeListOfShape	myFSplits

TopTools_DataMapOfShapeListOfShape	myESplits

Standard_Boolean	mySectionDone

Standard_Boolean	mySplitSectionEdgesDone

TopTools_ListOfShape	mySection

TopoDS_Solid	mySolidReference

TopoDS_Solid	mySolidToFill

TopTools_ListOfShape	myFaceAvoid

TopoDS_Face	myFaceReference

TopoDS_Face	myFaceToFill

TopTools_ListOfShape	myEdgeAvoid

TopoDS_Edge	myEdgeReference

TopoDS_Edge	myEdgeToFill

TopTools_ListOfShape	myVertexAvoid

TopTools_IndexedMapOfShape	myMAP1

TopTools_IndexedMapOfShape	myMAP2

Standard_Integer	myIsKPart

TopTools_DataMapOfShapeListOfShape	myKPMAPf1f2

Standard_Integer	mySHASETindex

Standard_Boolean	myClassifyDef

Standard_Boolean	myClassifyVal

TopOpeBRepTool_ShapeClassifier	myShapeClassifier

TopTools_MapOfShape	myMemoSplit

TCollection_AsciiString	myEmptyAS

Standard_Boolean	myProcessON

TopTools_IndexedDataMapOfShapeShape	myONFacesMap

TopTools_IndexedMapOfOrientedShape	myONElemMap

Additional Inherited Members
Static Public Member Functions inherited from TopOpeBRepBuild_Builder
static TopAbs_ShapeEnum	TopType (const TopoDS_Shape &S)

static Standard_Boolean	Reverse (const TopAbs_State T1, const TopAbs_State T2)

static TopAbs_Orientation	Orient (const TopAbs_Orientation O, const Standard_Boolean R)

static Standard_Boolean	Contains (const TopoDS_Shape &S, const TopTools_ListOfShape &L)

static Standard_Integer	KPls (const TopoDS_Shape &S, const TopAbs_ShapeEnum T, TopTools_ListOfShape &L)

static Standard_Integer	KPls (const TopoDS_Shape &S, const TopAbs_ShapeEnum T)

static Standard_Boolean	KPContains (const TopoDS_Shape &S, const TopTools_ListOfShape &L)

static Standard_Integer	KPreturn (const Standard_Integer KP)

static Standard_Boolean	GTakeCommonOfSame (const TopOpeBRepBuild_GTopo &G)

static Standard_Boolean	GTakeCommonOfDiff (const TopOpeBRepBuild_GTopo &G)

static Standard_Boolean	GContains (const TopoDS_Shape &S, const TopTools_ListOfShape &L)

static void	GCopyList (const TopTools_ListOfShape &Lin, const Standard_Integer i1, const Standard_Integer i2, TopTools_ListOfShape &Lou)

static void	GCopyList (const TopTools_ListOfShape &Lin, TopTools_ListOfShape &Lou)

static void	GdumpPNT (const gp_Pnt &P)

static void	GdumpORIPARPNT (const TopAbs_Orientation o, const Standard_Real p, const gp_Pnt &Pnt)

static void	PrintGeo (const TopoDS_Shape &S)

static void	PrintSur (const TopoDS_Face &F)

static void	PrintCur (const TopoDS_Edge &E)

static void	PrintPnt (const TopoDS_Vertex &V)

static void	PrintOri (const TopoDS_Shape &S)

static TCollection_AsciiString	StringState (const TopAbs_State S)

static Standard_Boolean	GcheckNBOUNDS (const TopoDS_Shape &E)

Detailed Description

extension of the class TopOpeBRepBuild_Builder dedicated to avoid bugs in "Rebuilding Result" algorithm for the case of SOLID/SOLID Boolean Operations

Constructor & Destructor Documentation

◆ TopOpeBRepBuild_Builder1()

TopOpeBRepBuild_Builder1::TopOpeBRepBuild_Builder1 ( const TopOpeBRepDS_BuildTool & BT )

◆ ~TopOpeBRepBuild_Builder1()

virtual TopOpeBRepBuild_Builder1::~TopOpeBRepBuild_Builder1 ( )

virtual

Member Function Documentation

◆ Clear()

virtual void TopOpeBRepBuild_Builder1::Clear ( )

overridevirtual

Removes all splits and merges already performed. Does NOT clear the handled DS (except ShapeWithStatesMaps).

Reimplemented from TopOpeBRepBuild_Builder.

◆ CorrectResult2d()

Standard_Integer TopOpeBRepBuild_Builder1::CorrectResult2d ( TopoDS_Shape & aResult )

◆ GFillEdgeNotSameDomWES()

void TopOpeBRepBuild_Builder1::GFillEdgeNotSameDomWES	(	const TopoDS_Shape &	E1,
		const TopTools_ListOfShape &	LSO2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_WireEdgeSet &	WES
	)

◆ GFillEdgeSameDomWES()

void TopOpeBRepBuild_Builder1::GFillEdgeSameDomWES	(	const TopoDS_Shape &	E1,
		const TopTools_ListOfShape &	LSO2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_WireEdgeSet &	WES
	)

◆ GFillFaceNotSameDomSFS()

void TopOpeBRepBuild_Builder1::GFillFaceNotSameDomSFS	(	const TopoDS_Shape &	F1,
		const TopTools_ListOfShape &	LSO2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_ShellFaceSet &	SFS
	)

◆ GFillFaceNotSameDomWES()

void TopOpeBRepBuild_Builder1::GFillFaceNotSameDomWES	(	const TopoDS_Shape &	F1,
		const TopTools_ListOfShape &	LSO2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_WireEdgeSet &	WES
	)

◆ GFillFaceSameDomSFS()

void TopOpeBRepBuild_Builder1::GFillFaceSameDomSFS	(	const TopoDS_Shape &	F1,
		const TopTools_ListOfShape &	LSO2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_ShellFaceSet &	SFS
	)

◆ GFillFaceSameDomWES()

void TopOpeBRepBuild_Builder1::GFillFaceSameDomWES	(	const TopoDS_Shape &	F1,
		const TopTools_ListOfShape &	LSO2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_WireEdgeSet &	WES
	)

◆ GFillShellSFS()

virtual void TopOpeBRepBuild_Builder1::GFillShellSFS	(	const TopoDS_Shape &	SH1,
		const TopTools_ListOfShape &	LSO2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_ShellFaceSet &	SFS
	)

overridevirtual

Reimplemented from TopOpeBRepBuild_Builder.

◆ GFillSolidSFS()

virtual void TopOpeBRepBuild_Builder1::GFillSolidSFS	(	const TopoDS_Shape &	SO1,
		const TopTools_ListOfShape &	LSO2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_ShellFaceSet &	SFS
	)

overridevirtual

Reimplemented from TopOpeBRepBuild_Builder.

◆ GFillSplitsPVS()

void TopOpeBRepBuild_Builder1::GFillSplitsPVS	(	const TopoDS_Shape &	anEdge,
		const TopOpeBRepBuild_GTopo &	G1,
		TopOpeBRepBuild_PaveSet &	PVS
	)

◆ GFillWireNotSameDomWES()

void TopOpeBRepBuild_Builder1::GFillWireNotSameDomWES	(	const TopoDS_Shape &	W1,
		const TopTools_ListOfShape &	LSO2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_WireEdgeSet &	WES
	)

◆ GFillWireSameDomWES()

void TopOpeBRepBuild_Builder1::GFillWireSameDomWES	(	const TopoDS_Shape &	W1,
		const TopTools_ListOfShape &	LSO2,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_WireEdgeSet &	WES
	)

◆ GWESMakeFaces()

virtual void TopOpeBRepBuild_Builder1::GWESMakeFaces	(	const TopoDS_Shape &	FF,
		TopOpeBRepBuild_WireEdgeSet &	WES,
		TopTools_ListOfShape &	LOF
	)

overridevirtual

Reimplemented from TopOpeBRepBuild_Builder.

◆ IsSame2d()

Standard_Integer TopOpeBRepBuild_Builder1::IsSame2d	(	const TopTools_SequenceOfShape &	aSeq,
		TopTools_ListOfShape &	aListOfPiecesOut2d
	)

protected

◆ MergeKPart() [1/2]

virtual void TopOpeBRepBuild_Builder1::MergeKPart ( )

overridevirtual

Reimplemented from TopOpeBRepBuild_Builder.

◆ MergeKPart() [2/2]

virtual void TopOpeBRepBuild_Builder1::MergeKPart	(	const TopAbs_State	TB1,
		const TopAbs_State	TB2
	)

overridevirtual

Reimplemented from TopOpeBRepBuild_Builder.

◆ OrientateEdgeOnFace()

void TopOpeBRepBuild_Builder1::OrientateEdgeOnFace	(	TopoDS_Edge &	EdgeToPerform,
		const TopoDS_Face &	baseFace,
		const TopoDS_Face &	edgeFace,
		const TopOpeBRepBuild_GTopo &	G1,
		Standard_Boolean &	stateOfFaceOri
	)		const

protected

◆ Perform() [1/2]

virtual void TopOpeBRepBuild_Builder1::Perform ( const Handle< TopOpeBRepDS_HDataStructure > & HDS )

overridevirtual

Stores the data structure <HDS>, Create shapes from the new geometries.

Reimplemented from TopOpeBRepBuild_Builder.

◆ Perform() [2/2]

virtual void TopOpeBRepBuild_Builder1::Perform	(	const Handle< TopOpeBRepDS_HDataStructure > &	HDS,
		const TopoDS_Shape &	S1,
		const TopoDS_Shape &	S2
	)

overridevirtual

Stores the data structure <HDS>, Create shapes from the new geometries, Evaluates if an operation performed on shapes S1,S2 is a particular case.

Reimplemented from TopOpeBRepBuild_Builder.

◆ PerformFacesWithStates()

void TopOpeBRepBuild_Builder1::PerformFacesWithStates	(	const TopoDS_Shape &	anObj,
		const TopTools_IndexedMapOfShape &	aFaces,
		TopOpeBRepDS_DataMapOfShapeState &	aSplF
	)

protected

◆ PerformONParts()

void TopOpeBRepBuild_Builder1::PerformONParts	(	const TopoDS_Shape &	F,
		const TopTools_IndexedMapOfShape &	SDfaces,
		const TopOpeBRepBuild_GTopo &	G,
		TopOpeBRepBuild_WireEdgeSet &	WES
	)

◆ PerformPieceIn2D()

void TopOpeBRepBuild_Builder1::PerformPieceIn2D	(	const TopoDS_Edge &	aPieceToPerform,
		const TopoDS_Edge &	aOriginalEdge,
		const TopoDS_Face &	edgeFace,
		const TopoDS_Face &	toFace,
		const TopOpeBRepBuild_GTopo &	G,
		Standard_Boolean &	keep
	)

◆ PerformPieceOn2D()

Standard_Integer TopOpeBRepBuild_Builder1::PerformPieceOn2D	(	const TopoDS_Shape &	aPieceObj,
		const TopoDS_Shape &	aFaceObj,
		const TopoDS_Shape &	aEdgeObj,
		TopTools_ListOfShape &	aListOfPieces,
		TopTools_ListOfShape &	aListOfFaces,
		TopTools_ListOfShape &	aListOfPiecesOut2d
	)

◆ PerformShapeWithStates() [1/2]

void TopOpeBRepBuild_Builder1::PerformShapeWithStates ( )

protected

◆ PerformShapeWithStates() [2/2]

void TopOpeBRepBuild_Builder1::PerformShapeWithStates	(	const TopoDS_Shape &	anObj,
		const TopoDS_Shape &	aTool
	)

protected

◆ SplitEdge()

void TopOpeBRepBuild_Builder1::SplitEdge	(	const TopoDS_Shape &	anEdge,
		TopTools_ListOfShape &	aLNew,
		TopOpeBRepDS_DataMapOfShapeState &	aDataMapOfShapeState
	)

protected

◆ StatusEdgesToSplit()

void TopOpeBRepBuild_Builder1::StatusEdgesToSplit	(	const TopoDS_Shape &	anObj,
		const TopTools_IndexedMapOfShape &	anEdgesToSplitMap,
		const TopTools_IndexedMapOfShape &	anEdgesToRestMap
	)

protected

◆ TwoPiecesON()

Standard_Integer TopOpeBRepBuild_Builder1::TwoPiecesON	(	const TopTools_SequenceOfShape &	aSeq,
		TopTools_ListOfShape &	aListOfPieces,
		TopTools_ListOfShape &	aListOfFaces,
		TopTools_ListOfShape &	aListOfPiecesOut2d
	)

Field Documentation

◆ myESplits

TopTools_DataMapOfShapeListOfShape TopOpeBRepBuild_Builder1::myESplits

protected

◆ myFSplits

TopTools_DataMapOfShapeListOfShape TopOpeBRepBuild_Builder1::myFSplits

protected

The documentation for this class was generated from the following file:

TopOpeBRepBuild_Builder1.hxx

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ TopOpeBRepBuild_Builder1()

◆ ~TopOpeBRepBuild_Builder1()

Member Function Documentation

◆ Clear()

◆ CorrectResult2d()

◆ GFillEdgeNotSameDomWES()

◆ GFillEdgeSameDomWES()

◆ GFillFaceNotSameDomSFS()

◆ GFillFaceNotSameDomWES()

◆ GFillFaceSameDomSFS()

◆ GFillFaceSameDomWES()

◆ GFillShellSFS()

◆ GFillSolidSFS()

◆ GFillSplitsPVS()

◆ GFillWireNotSameDomWES()

◆ GFillWireSameDomWES()

◆ GWESMakeFaces()

◆ IsSame2d()

◆ MergeKPart() [1/2]

◆ MergeKPart() [2/2]

◆ OrientateEdgeOnFace()

◆ Perform() [1/2]

◆ Perform() [2/2]

◆ PerformFacesWithStates()

◆ PerformONParts()

◆ PerformPieceIn2D()

◆ PerformPieceOn2D()

◆ PerformShapeWithStates() [1/2]

◆ PerformShapeWithStates() [2/2]

◆ SplitEdge()

◆ StatusEdgesToSplit()

◆ TwoPiecesON()

Field Documentation

◆ myESplits

◆ myFSplits