The algorithm is to build solids from set of shapes. It uses the BOPAlgo_Builder algorithm to intersect the given shapes and build the images of faces (if needed) and BOPAlgo_BuilderSolid algorithm to build the solids. More...

#include <BOPAlgo_MakerVolume.hxx>

Inheritance diagram for BOPAlgo_MakerVolume:

[legend]

Public Member Functions
	BOPAlgo_MakerVolume ()
	Empty contructor. More...

virtual	~BOPAlgo_MakerVolume ()

	BOPAlgo_MakerVolume (const Handle< NCollection_BaseAllocator > &theAllocator)
	Empty contructor. More...

virtual void	Clear () override
	Clears the data. More...

void	SetIntersect (const Standard_Boolean bIntersect)
	Sets the flag myIntersect: if <bIntersect> is TRUE the shapes from <myArguments> will be intersected. if <bIntersect> is FALSE no intersection will be done. More...

Standard_Boolean	IsIntersect () const
	Returns the flag <myIntersect>. More...

const TopoDS_Solid &	Box () const
	Returns the solid box <mySBox>. More...

const TopTools_ListOfShape &	Faces () const
	Returns the processed faces <myFaces>. More...

void	SetAvoidInternalShapes (const Standard_Boolean theAvoidInternal)
	Defines the preventing of addition of internal for solid parts into the result. By default the internal parts are added into result. More...

Standard_Boolean	IsAvoidInternalShapes () const
	Returns the AvoidInternalShapes flag. More...

virtual void	Perform () override
	Performs the operation. More...

Public Member Functions inherited from BOPAlgo_Builder
	BOPAlgo_Builder ()
	Empty constructor. More...

virtual	~BOPAlgo_Builder ()

	BOPAlgo_Builder (const Handle< NCollection_BaseAllocator > &theAllocator)

BOPAlgo_PPaveFiller	PPaveFiller ()
	Returns the PaveFiller, algorithm for sub-shapes intersection. More...

BOPDS_PDS	PDS ()
	Returns the Data Structure, holder of intersection information. More...

Handle< IntTools_Context >	Context () const
	Returns the Context, tool for cashing heavy algorithms. More...

virtual void	AddArgument (const TopoDS_Shape &theShape)
	Adds the argument to the operation. More...

virtual void	SetArguments (const TopTools_ListOfShape &theLS)
	Sets the list of arguments for the operation. More...

const TopTools_ListOfShape &	Arguments () const
	Returns the list of arguments. More...

void	SetNonDestructive (const Standard_Boolean theFlag)
	Sets the flag that defines the mode of treatment. In non-destructive mode the argument shapes are not modified. Instead a copy of a sub-shape is created in the result if it is needed to be updated. This flag is taken into account if internal PaveFiller is used only. In the case of calling PerformWithFiller the corresponding flag of that PaveFiller is in force. More...

Standard_Boolean	NonDestructive () const
	Returns the flag that defines the mode of treatment. In non-destructive mode the argument shapes are not modified. Instead a copy of a sub-shape is created in the result if it is needed to be updated. More...

void	SetGlue (const BOPAlgo_GlueEnum theGlue)
	Sets the glue option for the algorithm. More...

BOPAlgo_GlueEnum	Glue () const
	Returns the glue option of the algorithm. More...

void	SetCheckInverted (const Standard_Boolean theCheck)
	Enables/Disables the check of the input solids for inverted status. More...

Standard_Boolean	CheckInverted () const
	Returns the flag defining whether the check for input solids on inverted status should be performed or not. More...

virtual void	PerformWithFiller (const BOPAlgo_PaveFiller &theFiller)
	Performs the operation with the prepared filler. The intersection will not be performed in this case. More...

virtual void	BuildBOP (const TopTools_ListOfShape &theObjects, const TopAbs_State theObjState, const TopTools_ListOfShape &theTools, const TopAbs_State theToolsState, Handle< Message_Report > theReport=NULL)
	Builds the result shape according to the given states for the objects and tools. These states can be unambiguously converted into the Boolean operation type. Thus, it performs the Boolean operation on the given groups of shapes. More...

void	BuildBOP (const TopTools_ListOfShape &theObjects, const TopTools_ListOfShape &theTools, const BOPAlgo_Operation theOperation, Handle< Message_Report > theReport=NULL)
	Builds the result of Boolean operation of given type basing on the result of Builder operation (GF or any other). More...

const TopTools_DataMapOfShapeListOfShape &	Images () const
	Returns the map of images. More...

const TopTools_DataMapOfShapeListOfShape &	Origins () const
	Returns the map of origins. More...

const TopTools_DataMapOfShapeShape &	ShapesSD () const
	Returns the map of Same Domain (SD) shapes - coinciding shapes from different arguments. More...

Public Member Functions inherited from BOPAlgo_BuilderShape
const TopoDS_Shape &	Shape () const
	Returns the result of algorithm. More...

const TopTools_ListOfShape &	Modified (const TopoDS_Shape &theS)
	Returns the list of shapes Modified from the shape theS. More...

const TopTools_ListOfShape &	Generated (const TopoDS_Shape &theS)
	Returns the list of shapes Generated from the shape theS. More...

Standard_Boolean	IsDeleted (const TopoDS_Shape &theS)
	Returns true if the shape theS has been deleted. In this case the shape will have no Modified elements, but can have Generated elements. More...

Standard_Boolean	HasModified () const
	Returns true if any of the input shapes has been modified during operation. More...

Standard_Boolean	HasGenerated () const
	Returns true if any of the input shapes has generated shapes during operation. More...

Standard_Boolean	HasDeleted () const
	Returns true if any of the input shapes has been deleted during operation. More...

Handle< BRepTools_History >	History ()
	History Tool. More...

void	SetToFillHistory (const Standard_Boolean theHistFlag)
	Allows disabling the history collection. More...

Standard_Boolean	HasHistory () const
	Returns flag of history availability. More...

Public Member Functions inherited from BOPAlgo_Options
	BOPAlgo_Options ()
	Empty constructor. More...

	BOPAlgo_Options (const Handle< NCollection_BaseAllocator > &theAllocator)
	Constructor with allocator. More...

virtual	~BOPAlgo_Options ()
	Destructor. More...

const Handle< NCollection_BaseAllocator > &	Allocator () const
	Returns allocator. More...

void	AddError (const Handle< Message_Alert > &theAlert)
	Adds the alert as error (fail) More...

void	AddWarning (const Handle< Message_Alert > &theAlert)
	Adds the alert as warning. More...

Standard_Boolean	HasErrors () const
	Returns true if algorithm has failed. More...

Standard_Boolean	HasError (const Handle< Standard_Type > &theType) const
	Returns true if algorithm has generated error of specified type. More...

Standard_Boolean	HasWarnings () const
	Returns true if algorithm has generated some warning alerts. More...

Standard_Boolean	HasWarning (const Handle< Standard_Type > &theType) const
	Returns true if algorithm has generated warning of specified type. More...

const Handle< Message_Report > &	GetReport () const
	Returns report collecting all errors and warnings. More...

void	DumpErrors (Standard_OStream &theOS) const
	Dumps the error status into the given stream. More...

void	DumpWarnings (Standard_OStream &theOS) const
	Dumps the warning statuses into the given stream. More...

void	ClearWarnings ()
	Clears the warnings of the algorithm. More...

void	SetFuzzyValue (const Standard_Real theFuzz)
	Sets the additional tolerance. More...

Standard_Real	FuzzyValue () const
	Returns the additional tolerance. More...

void	SetProgressIndicator (const Message_ProgressScope &theProgress)
	Set the Progress Indicator object. More...

void	SetUseOBB (const Standard_Boolean theUseOBB)
	Enables/Disables the usage of OBB. More...

Standard_Boolean	UseOBB () const
	Returns the flag defining usage of OBB. More...

void	SetRunParallel (const Standard_Boolean theFlag)
	Set the flag of parallel processing if <theFlag> is true the parallel processing is switched on if <theFlag> is false the parallel processing is switched off. More...

Standard_Boolean	RunParallel () const
	Returns the flag of parallel processing. More...

Protected Member Functions
virtual void	CheckData () override
	Checks the data. More...

virtual void	PerformInternal1 (const BOPAlgo_PaveFiller &thePF) override
	Performs the operation. More...

void	CollectFaces ()
	Collects all faces. More...

void	MakeBox (TopTools_MapOfShape &theBoxFaces)
	Makes solid box. More...

void	BuildSolids (TopTools_ListOfShape &theLSR)
	Builds solids. More...

void	RemoveBox (TopTools_ListOfShape &theLSR, const TopTools_MapOfShape &theBoxFaces)
	Removes the covering box. More...

void	FillInternalShapes (const TopTools_ListOfShape &theLSR)
	Fills the solids with internal shapes. More...

void	BuildShape (const TopTools_ListOfShape &theLSR)
	Builds the result. More...

Protected Member Functions inherited from BOPAlgo_Builder
void	PrepareHistory ()
	Prepare information for history support. More...

virtual const TopTools_ListOfShape *	LocModified (const TopoDS_Shape &theS)
	Prepare history information for the input shapes taking into account possible operation-specific modifications. For instance, in the CellsBuilder operation, additionally to splitting input shapes the splits of the shapes (or the shapes themselves) may be unified during removal of internal boundaries. In this case each split should be linked to the unified shape. More...

virtual const TopTools_ListOfShape &	LocGenerated (const TopoDS_Shape &theS)
	Returns the list of shapes generated from the shape theS. Similarly to LocModified must be redefined for specific operations, obtaining Generated elements differently. More...

virtual void	PerformInternal (const BOPAlgo_PaveFiller &thePF)
	Performs the building of the result. The method calls the PerfromInternal1() method surrounded by a try-catch block. More...

virtual void	BuildResult (const TopAbs_ShapeEnum theType)
	Builds the result of operation. The method is called for each of the arguments type and adds into the result the splits of the arguments of that type. More...

void	CheckFiller ()
	Checks if the intersection algorithm has Errors/Warnings. More...

virtual void	Prepare ()
	Prepares the result shape by making it empty compound. More...

void	FillImagesVertices ()
	Fills the images of vertices. More...

void	FillImagesEdges ()
	Fills the images of edges. More...

void	FillImagesContainers (const TopAbs_ShapeEnum theType)
	Fills the images of containers (WIRES/SHELLS/COMPSOLID). More...

void	FillImagesContainer (const TopoDS_Shape &theS, const TopAbs_ShapeEnum theType)
	Builds the image of the given container using the splits of its sub-shapes. More...

void	FillImagesFaces ()
	Fills the images of faces. The method consists of three steps: More...

virtual void	BuildSplitFaces ()
	Builds the splits of faces using the information from the intersection stage stored in Data Structure. More...

void	FillSameDomainFaces ()
	Looks for the same domain faces among the splits of the faces. Updates the map of images with SD faces. More...

void	FillInternalVertices ()
	Classifies the alone vertices on faces relatively its splits and adds them as INTERNAL into the splits. More...

void	FillImagesSolids ()
	Fills the images of solids. The method consists of four steps: More...

void	BuildDraftSolid (const TopoDS_Shape &theSolid, TopoDS_Shape &theDraftSolid, TopTools_ListOfShape &theLIF)
	Builds the draft solid by rebuilding the shells of the solid with the splits of faces. More...

virtual void	FillIn3DParts (TopTools_DataMapOfShapeShape &theDraftSolids)
	Finds faces located inside each solid. More...

void	BuildSplitSolids (TopTools_DataMapOfShapeShape &theDraftSolids)
	Builds the splits of the solids using their draft versions and faces located inside. More...

void	FillInternalShapes ()
	Classifies the vertices and edges from the arguments relatively splits of solids and makes them INTERNAL for solids. More...

void	FillImagesCompounds ()
	Fills the images of compounds. More...

void	FillImagesCompound (const TopoDS_Shape &theS, TopTools_MapOfShape &theMF)
	Builds the image of the given compound. More...

virtual void	PostTreat ()
	Post treatment of the result of the operation. The method checks validity of the sub-shapes of the result and updates the tolerances to make them valid. More...

Protected Member Functions inherited from BOPAlgo_BuilderShape
	BOPAlgo_BuilderShape ()
	Empty constructor. More...

	BOPAlgo_BuilderShape (const Handle< NCollection_BaseAllocator > &theAllocator)
	Constructor with allocator. More...

Protected Member Functions inherited from BOPAlgo_Algo
	BOPAlgo_Algo ()
	Default constructor. More...

virtual	~BOPAlgo_Algo ()

	BOPAlgo_Algo (const Handle< NCollection_BaseAllocator > &theAllocator)

virtual void	CheckResult ()
	Checks the obtained result. More...

Protected Member Functions inherited from BOPAlgo_Options
void	UserBreak () const
	Breaks the execution if the break signal is indicated by myProgressIndicator. More...

Protected Attributes
Standard_Boolean	myIntersect

Bnd_Box	myBBox

TopoDS_Solid	mySBox

TopTools_ListOfShape	myFaces

Standard_Boolean	myAvoidInternalShapes

Protected Attributes inherited from BOPAlgo_Builder
TopTools_ListOfShape	myArguments
	Arguments of the operation. More...

TopTools_MapOfShape	myMapFence
	Fence map providing the uniqueness of the shapes in the list of arguments. More...

BOPAlgo_PPaveFiller	myPaveFiller
	Pave Filler - algorithm for sub-shapes intersection. More...

BOPDS_PDS	myDS
	Data Structure - holder of intersection information. More...

Handle< IntTools_Context >	myContext
	Context - tool for cashing heavy algorithms such as Projectors and Classifiers. More...

Standard_Integer	myEntryPoint
	EntryPoint - controls the deletion of the PaveFiller, which could live longer than the Builder. More...

TopTools_DataMapOfShapeListOfShape	myImages
	Images - map of Images of the sub-shapes of arguments. More...

TopTools_DataMapOfShapeShape	myShapesSD
	ShapesSD - map of SD Shapes. More...

TopTools_DataMapOfShapeListOfShape	myOrigins
	Origins - map of Origins, back map of Images. More...

TopTools_DataMapOfShapeListOfShape	myInParts
	InParts - map of own and acquired IN faces of the arguments solids. More...

Standard_Boolean	myNonDestructive
	Safe processing option allows avoiding modification of the input shapes. More...

BOPAlgo_GlueEnum	myGlue
	Gluing option allows speeding up the intersection of the input shapes. More...

Standard_Boolean	myCheckInverted
	Check inverted option allows disabling the check of input solids on inverted status. More...

Protected Attributes inherited from BOPAlgo_BuilderShape
TopoDS_Shape	myShape
	Result of the operation. More...

TopTools_ListOfShape	myHistShapes
	Storer for the history shapes. More...

TopTools_MapOfShape	myMapShape
	Cashed map of all arguments shapes. More...

Standard_Boolean	myFillHistory
	Controls the history filling. More...

Handle< BRepTools_History >	myHistory
	History tool. More...

Protected Attributes inherited from BOPAlgo_Options
Handle< NCollection_BaseAllocator >	myAllocator
	Enables/Disables the usage of OBB. More...

Handle< Message_Report >	myReport
	Enables/Disables the usage of OBB. More...

Standard_Boolean	myRunParallel
	Enables/Disables the usage of OBB. More...

Standard_Real	myFuzzyValue
	Enables/Disables the usage of OBB. More...

const Message_ProgressScope *	myProgressScope
	Enables/Disables the usage of OBB. More...

Standard_Boolean	myUseOBB
	Enables/Disables the usage of OBB. More...

Additional Inherited Members
Static Public Member Functions inherited from BOPAlgo_Options
static Standard_Boolean	GetParallelMode ()
	Gets the global parallel mode. More...

static void	SetParallelMode (const Standard_Boolean theNewMode)
	Sets the global parallel mode. More...

Detailed Description

The algorithm is to build solids from set of shapes. It uses the BOPAlgo_Builder algorithm to intersect the given shapes and build the images of faces (if needed) and BOPAlgo_BuilderSolid algorithm to build the solids.

Steps of the algorithm:

Collect all faces: intersect the shapes if necessary and collect the images of faces, otherwise just collect the faces to the <myFaces> list; All faces on this step added twice, with orientation FORWARD and REVERSED;
Create bounding box covering all the faces from <myFaces> and create solid box from corner points of that bounding box (myBBox, mySBox). Add faces from that box to <myFaces>;
Build solids from <myFaces> using BOPAlgo_BuilderSolid algorithm;
Treat the result: Eliminate solid containig faces from <mySBox>;
Fill internal shapes: add internal vertices and edges into created solids;
Prepare the history.

Fields: <myIntersect> - boolean flag. It defines whether intersect shapes from <myArguments> (if set to TRUE) or not (FALSE). The default value is TRUE. By setting it to FALSE the user should guarantee that shapes in <myArguments> do not interfere with each other, otherwise the result is unpredictable.

<myBBox> - bounding box, covering all faces from <myFaces>.

<mySBox> - Solid box created from the corner points of <myBBox>.

<myFaces> - the list is to keep the "final" faces, that will be given to the BOPAlgo_BuilderSolid algorithm. If the shapes have been interfered it should contain the images of the source shapes, otherwise its just the original faces. It also contains the faces from <mySBox>.

Fields inherited from BOPAlgo_Builder:

<myArguments> - list of the source shapes. The source shapes can have any type, but each shape must not be self-interfered.

<myShape> - Result shape:

empty compound - if no solids were created;
solid - if created only one solid;
compound of solids - if created more than one solid.

Fields inherited from BOPAlgo_Algo:

<myRunParallel> - Defines whether the parallel processing is switched on or not. <myReport> - Error status of the operation. Additionally to the errors of the parent algorithm it can have the following values:

BOPAlgo_AlertSolidBuilderFailed - BOPAlgo_BuilderSolid algorithm has failed.

Example:

BOPAlgo_MakerVolume aMV; // aMV.SetArguments(aLS); //source shapes aMV.SetRunParallel(bRunParallel); //parallel or single mode aMV.SetIntersect(bIntersect); //intersect or not the shapes from <aLS> // aMV.Perform(); //perform the operation if (aMV.HasErrors()) { //check error status return; } // const TopoDS_Shape& aResult = aMV.Shape(); //result of the operation

Constructor & Destructor Documentation

◆ BOPAlgo_MakerVolume() [1/2]

BOPAlgo_MakerVolume::BOPAlgo_MakerVolume ( )

Empty contructor.

◆ ~BOPAlgo_MakerVolume()

virtual BOPAlgo_MakerVolume::~BOPAlgo_MakerVolume ( )

virtual

◆ BOPAlgo_MakerVolume() [2/2]

BOPAlgo_MakerVolume::BOPAlgo_MakerVolume ( const Handle< NCollection_BaseAllocator > & theAllocator )

Empty contructor.

Member Function Documentation

◆ Box()

const TopoDS_Solid& BOPAlgo_MakerVolume::Box ( ) const

Returns the solid box <mySBox>.

◆ BuildShape()

void BOPAlgo_MakerVolume::BuildShape ( const TopTools_ListOfShape & theLSR )

protected

Builds the result.

◆ BuildSolids()

void BOPAlgo_MakerVolume::BuildSolids ( TopTools_ListOfShape & theLSR )

protected

Builds solids.

◆ CheckData()

virtual void BOPAlgo_MakerVolume::CheckData ( )

overrideprotectedvirtual

Checks the data.

Reimplemented from BOPAlgo_Builder.

◆ Clear()

virtual void BOPAlgo_MakerVolume::Clear ( )

overridevirtual

Clears the data.

Reimplemented from BOPAlgo_Builder.

◆ CollectFaces()

void BOPAlgo_MakerVolume::CollectFaces ( )

protected

Collects all faces.

◆ Faces()

const TopTools_ListOfShape& BOPAlgo_MakerVolume::Faces ( ) const

Returns the processed faces <myFaces>.

◆ FillInternalShapes()

void BOPAlgo_MakerVolume::FillInternalShapes ( const TopTools_ListOfShape & theLSR )

protected

Fills the solids with internal shapes.

◆ IsAvoidInternalShapes()

Standard_Boolean BOPAlgo_MakerVolume::IsAvoidInternalShapes ( ) const

inline

Returns the AvoidInternalShapes flag.

◆ IsIntersect()

Standard_Boolean BOPAlgo_MakerVolume::IsIntersect ( ) const

Returns the flag <myIntersect>.

◆ MakeBox()

void BOPAlgo_MakerVolume::MakeBox ( TopTools_MapOfShape & theBoxFaces )

protected

Makes solid box.

◆ Perform()

virtual void BOPAlgo_MakerVolume::Perform ( )

overridevirtual

Performs the operation.

Reimplemented from BOPAlgo_Builder.

◆ PerformInternal1()

virtual void BOPAlgo_MakerVolume::PerformInternal1 ( const BOPAlgo_PaveFiller & thePF )

overrideprotectedvirtual

Performs the operation.

Reimplemented from BOPAlgo_Builder.

◆ RemoveBox()

void BOPAlgo_MakerVolume::RemoveBox	(	TopTools_ListOfShape &	theLSR,
		const TopTools_MapOfShape &	theBoxFaces
	)

protected

Removes the covering box.

◆ SetAvoidInternalShapes()

void BOPAlgo_MakerVolume::SetAvoidInternalShapes ( const Standard_Boolean theAvoidInternal )

inline

Defines the preventing of addition of internal for solid parts into the result. By default the internal parts are added into result.

◆ SetIntersect()

void BOPAlgo_MakerVolume::SetIntersect ( const Standard_Boolean bIntersect )

Sets the flag myIntersect: if <bIntersect> is TRUE the shapes from <myArguments> will be intersected. if <bIntersect> is FALSE no intersection will be done.

Field Documentation

◆ myAvoidInternalShapes

Standard_Boolean BOPAlgo_MakerVolume::myAvoidInternalShapes

protected

◆ myBBox

Bnd_Box BOPAlgo_MakerVolume::myBBox

protected

◆ myFaces

TopTools_ListOfShape BOPAlgo_MakerVolume::myFaces

protected

◆ myIntersect

Standard_Boolean BOPAlgo_MakerVolume::myIntersect

protected

◆ mySBox

TopoDS_Solid BOPAlgo_MakerVolume::mySBox

protected

The documentation for this class was generated from the following file:

BOPAlgo_MakerVolume.hxx

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ BOPAlgo_MakerVolume() [1/2]

◆ ~BOPAlgo_MakerVolume()

◆ BOPAlgo_MakerVolume() [2/2]

Member Function Documentation

◆ Box()

◆ BuildShape()

◆ BuildSolids()

◆ CheckData()

◆ Clear()

◆ CollectFaces()

◆ Faces()

◆ FillInternalShapes()

◆ IsAvoidInternalShapes()

◆ IsIntersect()

◆ MakeBox()

◆ Perform()

◆ PerformInternal1()

◆ RemoveBox()

◆ SetAvoidInternalShapes()

◆ SetIntersect()

Field Documentation

◆ myAvoidInternalShapes

◆ myBBox

◆ myFaces

◆ myIntersect

◆ mySBox