A framework to manage presentation and selection of shapes. AIS_Shape is the interactive object which is used the most by applications. There are standard functions available which allow you to prepare selection operations on the constituent elements of shapes - vertices, edges, faces etc - in an open local context. The selection modes specific to "Shape" type objects are referred to as Standard Activation Mode. These modes are only taken into account in open local context and only act on Interactive Objects which have redefined the virtual method AcceptShapeDecomposition so that it returns true. Several advanced functions are also available. These include functions to manage deviation angle and deviation coefficient - both HLR and non-HLR - of an inheriting shape class. These services allow you to select one type of shape interactive object for higher precision drawing. When you do this, the Prs3d_Drawer::IsOwn... functions corresponding to the above deviation angle and coefficient functions return true indicating that there is a local setting available for the specific object. More...

#include <AIS_Shape.hxx>

Inheritance diagram for AIS_Shape:

[legend]

Public Member Functions
	AIS_Shape (const TopoDS_Shape &shap)
	Initializes construction of the shape shap from wires, edges and vertices. More...

virtual Standard_Integer	Signature () const override
	Returns index 0. This value refers to SHAPE from TopAbs_ShapeEnum. More...

virtual AIS_KindOfInteractive	Type () const override
	Returns Object as the type of Interactive Object. More...

virtual Standard_Boolean	AcceptShapeDecomposition () const override
	Returns true if the Interactive Object accepts shape decomposition. More...

virtual Standard_Boolean	AcceptDisplayMode (const Standard_Integer theMode) const override
	Return true if specified display mode is supported. More...

const TopoDS_Shape &	Shape () const
	Returns this shape object. More...

void	SetShape (const TopoDS_Shape &theShape)
	Constructs an instance of the shape object theShape. More...

void	Set (const TopoDS_Shape &theShape)
	Alias for ::SetShape(). More...

Standard_Boolean	SetOwnDeviationCoefficient ()
	Sets a local value for deviation coefficient for this specific shape. More...

Standard_Boolean	SetOwnHLRDeviationCoefficient ()
	Sets a local value for HLR deviation coefficient for this specific shape. More...

Standard_Boolean	SetOwnDeviationAngle ()
	Sets a local value for deviation angle for this specific shape. More...

Standard_Boolean	SetOwnHLRDeviationAngle ()
	Sets a local value for HLR deviation angle for this specific shape. More...

void	SetOwnDeviationCoefficient (const Standard_Real aCoefficient)
	Sets a local value for deviation coefficient for this specific shape. More...

void	SetOwnHLRDeviationCoefficient (const Standard_Real aCoefficient)
	sets myOwnHLRDeviationCoefficient field in Prs3d_Drawer & recomputes presentation More...

void	SetAngleAndDeviation (const Standard_Real anAngle)
	this compute a new angle and Deviation from the value anAngle and set the values stored in myDrawer with these that become local to the shape More...

Standard_Real	UserAngle () const
	gives back the angle initial value put by the User. More...

void	SetOwnDeviationAngle (const Standard_Real anAngle)
	sets myOwnDeviationAngle field in Prs3d_Drawer & recomputes presentation More...

void	SetHLRAngleAndDeviation (const Standard_Real anAngle)
	this compute a new Angle and Deviation from the value anAngle for HLR and set the values stored in myDrawer for with these that become local to the shape More...

void	SetOwnHLRDeviationAngle (const Standard_Real anAngle)
	sets myOwnHLRDeviationAngle field in Prs3d_Drawer & recomputes presentation More...

Standard_Boolean	OwnDeviationCoefficient (Standard_Real &aCoefficient, Standard_Real &aPreviousCoefficient) const
	Returns true and the values of the deviation coefficient aCoefficient and the previous deviation coefficient aPreviousCoefficient. If these values are not already set, false is returned. More...

Standard_Boolean	OwnHLRDeviationCoefficient (Standard_Real &aCoefficient, Standard_Real &aPreviousCoefficient) const
	Returns true and the values of the HLR deviation coefficient aCoefficient and the previous HLR deviation coefficient aPreviousCoefficient. If these values are not already set, false is returned. More...

Standard_Boolean	OwnDeviationAngle (Standard_Real &anAngle, Standard_Real &aPreviousAngle) const
	Returns true and the values of the deviation angle anAngle and the previous deviation angle aPreviousAngle. If these values are not already set, false is returned. More...

Standard_Boolean	OwnHLRDeviationAngle (Standard_Real &anAngle, Standard_Real &aPreviousAngle) const
	Returns true and the values of the HLR deviation angle anAngle and of the previous HLR deviation angle aPreviousAngle. If these values are not already set, false is returned. More...

void	SetTypeOfHLR (const Prs3d_TypeOfHLR theTypeOfHLR)
	Sets the type of HLR algorithm used by the shape. More...

Prs3d_TypeOfHLR	TypeOfHLR () const
	Gets the type of HLR algorithm. More...

virtual void	SetColor (const Quantity_Color &theColor) override
	Sets the color aColor in the reconstructed compound shape. Acts via the Drawer methods below on the appearance of: More...

virtual void	UnsetColor () override
	Removes settings for color in the reconstructed compound shape. More...

virtual void	SetWidth (const Standard_Real aValue) override
	Sets the value aValue for line width in the reconstructed compound shape. Changes line aspects for lines presentation. More...

virtual void	UnsetWidth () override
	Removes the setting for line width in the reconstructed compound shape. More...

virtual void	SetMaterial (const Graphic3d_MaterialAspect &aName) override
	Allows you to provide settings for the material aName in the reconstructed compound shape. More...

virtual void	UnsetMaterial () override
	Removes settings for material in the reconstructed compound shape. More...

virtual void	SetTransparency (const Standard_Real aValue=0.6) override
	Sets the value aValue for transparency in the reconstructed compound shape. More...

virtual void	UnsetTransparency () override
	Removes the setting for transparency in the reconstructed compound shape. More...

virtual const Bnd_Box &	BoundingBox ()
	Constructs a bounding box with which to reconstruct compound topological shapes for presentation. More...

virtual void	Color (Quantity_Color &aColor) const override
	Returns the Color attributes of the shape accordingly to the current facing model;. More...

virtual Graphic3d_NameOfMaterial	Material () const override
	Returns the NameOfMaterial attributes of the shape accordingly to the current facing model;. More...

virtual Standard_Real	Transparency () const override
	Returns the transparency attributes of the shape accordingly to the current facing model;. More...

Public Member Functions inherited from AIS_InteractiveObject
void	Redisplay (const Standard_Boolean AllModes=Standard_False)
	Updates the active presentation; if <AllModes> = Standard_True all the presentations inside are recomputed. IMPORTANT: It is preferable to call Redisplay method of corresponding AIS_InteractiveContext instance for cases when it is accessible. This method just redirects call to myCTXPtr, so this class field must be up to date for proper result. More...

Standard_Boolean	HasInteractiveContext () const
	Indicates whether the Interactive Object has a pointer to an interactive context. More...

AIS_InteractiveContext *	InteractiveContext () const
	Returns the context pointer to the interactive context. More...

virtual void	SetContext (const Handle< AIS_InteractiveContext > &aCtx)
	Sets the interactive context aCtx and provides a link to the default drawing tool or "Drawer" if there is none. More...

Standard_Boolean	HasOwner () const
	Returns true if the object has an owner attributed to it. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. More...

const Handle< Standard_Transient > &	GetOwner () const
	Returns the owner of the Interactive Object. The owner can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of, and takes the form of a transient. There are two types of owners: More...

void	SetOwner (const Handle< Standard_Transient > &theApplicativeEntity)
	Allows you to attribute the owner theApplicativeEntity to an Interactive Object. This can be a shape for a set of sub-shapes or a sub-shape for sub-shapes which it is composed of. The owner takes the form of a transient. More...

void	ClearOwner ()
	Each Interactive Object has methods which allow us to attribute an Owner to it in the form of a Transient. This method removes the owner from the graphic entity. More...

Handle< AIS_InteractiveContext >	GetContext () const
	Returns the context pointer to the interactive context. More...

Standard_Boolean	HasPresentation () const
	Returns TRUE when this object has a presentation in the current DisplayMode() More...

Handle< Prs3d_Presentation >	Presentation () const
	Returns the current presentation of this object according to the current DisplayMode() More...

void	SetAspect (const Handle< Prs3d_BasicAspect > &anAspect)
	Sets the graphic basic aspect to the current presentation. More...

virtual void	DumpJson (Standard_OStream &theOStream, const Standard_Integer theDepth=-1) const override
	Dumps the content of me into the stream. More...

Public Member Functions inherited from SelectMgr_SelectableObject
virtual	~SelectMgr_SelectableObject ()
	Clears all selections of the object. More...

void	RecomputePrimitives ()
	Re-computes the sensitive primitives for all modes. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection. More...

void	RecomputePrimitives (const Standard_Integer theMode)
	Re-computes the sensitive primitives which correspond to the <theMode>th selection mode. IMPORTANT: Do not use this method to update selection primitives except implementing custom selection manager! selection manager! This method does not take into account necessary BVH updates, but may invalidate the pointers it refers to. TO UPDATE SELECTION properly from outside classes, use method UpdateSelection. More...

void	AddSelection (const Handle< SelectMgr_Selection > &aSelection, const Standard_Integer aMode)
	Adds the selection aSelection with the selection mode index aMode to this framework. More...

void	ClearSelections (const Standard_Boolean update=Standard_False)
	Empties all the selections in the SelectableObject <update> parameter defines whether all object's selections should be flagged for further update or not. This improved method can be used to recompute an object's selection (without redisplaying the object completely) when some selection mode is activated not for the first time. More...

const Handle< SelectMgr_Selection > &	Selection (const Standard_Integer theMode) const
	Returns the selection having specified selection mode or NULL. More...

Standard_Boolean	HasSelection (const Standard_Integer theMode) const
	Returns true if a selection corresponding to the selection mode theMode was computed for this object. More...

const SelectMgr_SequenceOfSelection &	Selections () const
	Return the sequence of selections. More...

void	ResetTransformation () override
	resets local transformation to identity. More...

virtual void	UpdateTransformation () override
	Recomputes the location of the selection aSelection. More...

virtual void	UpdateTransformations (const Handle< SelectMgr_Selection > &aSelection)
	Updates locations in all sensitive entities from <aSelection> and in corresponding entity owners. More...

virtual void	HilightSelected (const Handle< PrsMgr_PresentationManager > &thePrsMgr, const SelectMgr_SequenceOfOwner &theSeq)
	Method which draws selected owners ( for fast presentation draw ) More...

virtual void	ClearSelected ()
	Method which clear all selected owners belonging to this selectable object ( for fast presentation draw ) More...

virtual void	ClearDynamicHighlight (const Handle< PrsMgr_PresentationManager > &theMgr)
	Method that needs to be implemented when the object manages selection and dynamic highlighting on its own. Clears or invalidates dynamic highlight presentation. By default it clears immediate draw of given presentation manager. More...

virtual void	HilightOwnerWithColor (const Handle< PrsMgr_PresentationManager > &thePM, const Handle< Prs3d_Drawer > &theStyle, const Handle< SelectMgr_EntityOwner > &theOwner)
	Method which hilight an owner belonging to this selectable object ( for fast presentation draw ) More...

virtual Standard_Boolean	IsAutoHilight () const
	If returns True, the old mechanism for highlighting selected objects is used (HilightSelected Method may be empty). If returns False, the HilightSelected method will be fully responsible for highlighting selected entity owners belonging to this selectable object. More...

virtual void	SetAutoHilight (const Standard_Boolean theAutoHilight)
	Set AutoHilight property to true or false. More...

Handle< Prs3d_Presentation >	GetHilightPresentation (const Handle< PrsMgr_PresentationManager > &thePrsMgr)
	Creates or returns existing presentation for highlighting detected object. More...

Handle< Prs3d_Presentation >	GetSelectPresentation (const Handle< PrsMgr_PresentationManager > &thePrsMgr)
	Creates or returns existing presentation for highlighting selected object. More...

virtual void	ErasePresentations (Standard_Boolean theToRemove)
	Removes presentations returned by GetHilightPresentation() and GetSelectPresentation(). More...

virtual void	SetZLayer (const Graphic3d_ZLayerId theLayerId) override
	Set Z layer ID and update all presentations of the selectable object. The layers mechanism allows drawing objects in higher layers in overlay of objects in lower layers. More...

void	UpdateSelection (const Standard_Integer theMode=-1)
	Sets update status FULL to selections of the object. Must be used as the only method of UpdateSelection from outer classes to prevent BVH structures from being outdated. More...

void	SetAssemblyOwner (const Handle< SelectMgr_EntityOwner > &theOwner, const Standard_Integer theMode=-1)
	Sets common entity owner for assembly sensitive object entities. More...

Bnd_Box	BndBoxOfSelected (const Handle< SelectMgr_IndexedMapOfOwner > &theOwners)
	Returns a bounding box of sensitive entities with the owners given if they are a part of activated selection. More...

Standard_Integer	GlobalSelectionMode () const
	Returns the mode for selection of object as a whole; 0 by default. More...

virtual Handle< SelectMgr_EntityOwner >	GlobalSelOwner () const
	Returns the owner of mode for selection of object as a whole. More...

virtual const Handle< SelectMgr_EntityOwner > &	GetAssemblyOwner () const
	Returns common entity owner if the object is an assembly. More...

void	Init ()
	Begins the iteration scanning for sensitive primitives. More...

Standard_Boolean	More () const
	Continues the iteration scanning for sensitive primitives. More...

void	Next ()
	Continues the iteration scanning for sensitive primitives. More...

const Handle< SelectMgr_Selection > &	CurrentSelection () const
	Returns the current selection in this framework. More...

Public Member Functions inherited from PrsMgr_PresentableObject
PrsMgr_Presentations &	Presentations ()
	Return presentations. More...

Graphic3d_ZLayerId	ZLayer () const
	Get ID of Z layer for main presentation. More...

Standard_Boolean	IsMutable () const
	Returns true if object has mutable nature (content or location are be changed regularly). Mutable object will be managed in different way than static onces (another optimizations). More...

virtual void	SetMutable (const Standard_Boolean theIsMutable)
	Sets if the object has mutable nature (content or location will be changed regularly). This method should be called before object displaying to take effect. More...

Standard_Boolean	HasDisplayMode () const
	Returns true if the Interactive Object has display mode setting overriding global setting (within Interactive Context). More...

Standard_Integer	DisplayMode () const
	Returns the display mode setting of the Interactive Object. The range of supported display mode indexes should be specified within object definition and filtered by AccepDisplayMode(). More...

void	SetDisplayMode (const Standard_Integer theMode)
	Sets the display mode for the interactive object. An object can have its own temporary display mode, which is different from that proposed by the interactive context. More...

void	UnsetDisplayMode ()
	Removes display mode settings from the interactive object. More...

Standard_Boolean	HasHilightMode () const
	Returns true if the Interactive Object is in highlight mode. More...

Standard_Integer	HilightMode () const
	Returns highlight display mode. This is obsolete method for backward compatibility - use ::HilightAttributes() and ::DynamicHilightAttributes() instead. More...

void	SetHilightMode (const Standard_Integer theMode)
	Sets highlight display mode. This is obsolete method for backward compatibility - use ::HilightAttributes() and ::DynamicHilightAttributes() instead. More...

void	UnsetHilightMode ()
	Unsets highlight display mode. More...

virtual Standard_Integer	DefaultDisplayMode () const
	Returns the default display mode. More...

Standard_Boolean	ToBeUpdated (Standard_Boolean theToIncludeHidden=Standard_False) const
	Returns TRUE if any active presentation has invalidation flag. More...

void	SetToUpdate (Standard_Integer theMode)
	Flags presentation to be updated; UpdatePresentations() will recompute these presentations. More...

void	SetToUpdate ()
	flags all the Presentations to be Updated. More...

Standard_Boolean	IsInfinite () const
	Returns true if the interactive object is infinite; FALSE by default. This flag affects various operations operating on bounding box of graphic presentations of this object. For instance, infinite objects are not taken in account for View FitAll. This does not necessarily means that object is actually infinite, auxiliary objects might be also marked with this flag to achieve desired behavior. More...

void	SetInfiniteState (const Standard_Boolean theFlag=Standard_True)
	Sets if object should be considered as infinite. More...

PrsMgr_TypeOfPresentation3d	TypeOfPresentation3d () const
	Returns information on whether the object accepts display in HLR mode or not. More...

void	SetTypeOfPresentation (const PrsMgr_TypeOfPresentation3d theType)
	Set type of presentation. More...

const Handle< Prs3d_Drawer > &	Attributes () const
	Returns the attributes settings. More...

virtual void	SetAttributes (const Handle< Prs3d_Drawer > &theDrawer)
	Initializes the drawing tool theDrawer. More...

const Handle< Prs3d_Drawer > &	HilightAttributes () const
	Returns the hilight attributes settings. When not NULL, overrides both Prs3d_TypeOfHighlight_LocalSelected and Prs3d_TypeOfHighlight_Selected defined within AIS_InteractiveContext. More...

virtual void	SetHilightAttributes (const Handle< Prs3d_Drawer > &theDrawer)
	Initializes the hilight drawing tool theDrawer. More...

const Handle< Prs3d_Drawer > &	DynamicHilightAttributes () const
	Returns the hilight attributes settings. When not NULL, overrides both Prs3d_TypeOfHighlight_LocalDynamic and Prs3d_TypeOfHighlight_Dynamic defined within AIS_InteractiveContext. More...

virtual void	SetDynamicHilightAttributes (const Handle< Prs3d_Drawer > &theDrawer)
	Initializes the dynamic hilight drawing tool. More...

virtual void	UnsetHilightAttributes ()
	Clears settings provided by the hilight drawing tool theDrawer. More...

void	SynchronizeAspects ()
	Synchronize presentation aspects after their modification. More...

const Handle< Graphic3d_TransformPers > &	TransformPersistence () const
	Returns Transformation Persistence defining a special Local Coordinate system where this presentable object is located or NULL handle if not defined. Position of the object having Transformation Persistence is mutable and depends on camera position. The same applies to a bounding box of the object. More...

virtual void	SetTransformPersistence (const Handle< Graphic3d_TransformPers > &theTrsfPers)
	Sets up Transform Persistence defining a special Local Coordinate system where this object should be located. Note that management of Transform Persistence object is more expensive than of the normal one, because it requires its position being recomputed basing on camera position within each draw call / traverse. More...

const Handle< Geom_Transformation > &	LocalTransformationGeom () const
	Return the local transformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...

void	SetLocalTransformation (const gp_Trsf &theTrsf)
	Sets local transformation to theTransformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...

void	SetLocalTransformation (const Handle< Geom_Transformation > &theTrsf)
	Sets local transformation to theTransformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...

Standard_Boolean	HasTransformation () const
	Returns true if object has a transformation that is different from the identity. More...

const Handle< Geom_Transformation > &	TransformationGeom () const
	Return the transformation taking into account transformation of parent object(s). Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...

const gp_Trsf &	LocalTransformation () const
	Return the local transformation. Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...

const gp_Trsf &	Transformation () const
	Return the transformation taking into account transformation of parent object(s). Note that the local transformation of the object having Transformation Persistence is applied within Local Coordinate system defined by this Persistence. More...

const gp_GTrsf &	InversedTransformation () const
	Return inversed transformation. More...

const Handle< Geom_Transformation > &	CombinedParentTransformation () const
	Return combined parent transformation. More...

const Handle< Graphic3d_SequenceOfHClipPlane > &	ClipPlanes () const
	Get clip planes. More...

virtual void	SetClipPlanes (const Handle< Graphic3d_SequenceOfHClipPlane > &thePlanes)
	Set clip planes for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be subtracted from limit to predict the maximum possible number of object clipping planes. More...

virtual void	AddClipPlane (const Handle< Graphic3d_ClipPlane > &thePlane)
	Adds clip plane for graphical clipping for all display mode presentations. The composition of clip planes truncates the rendering space to convex volume. Please be aware that number of supported clip plane is limited. The planes which exceed the limit are ignored. Besides of this, some planes can be already set in view where the object is shown: the number of these planes should be subtracted from limit to predict the maximum possible number of object clipping planes. More...

virtual void	RemoveClipPlane (const Handle< Graphic3d_ClipPlane > &thePlane)
	Removes previously added clip plane. More...

PrsMgr_PresentableObject *	Parent () const
	Returns parent of current object in scene hierarchy. More...

const PrsMgr_ListOfPresentableObjects &	Children () const
	Returns children of the current object. More...

virtual void	AddChild (const Handle< PrsMgr_PresentableObject > &theObject)
	Makes theObject child of current object in scene hierarchy. More...

void	AddChildWithCurrentTransformation (const Handle< PrsMgr_PresentableObject > &theObject)
	Makes theObject child of current object in scene hierarchy with keeping the current global transformation So the object keeps the same position/orientation in the global CS. More...

virtual void	RemoveChild (const Handle< PrsMgr_PresentableObject > &theObject)
	Removes theObject from children of current object in scene hierarchy. More...

void	RemoveChildWithRestoreTransformation (const Handle< PrsMgr_PresentableObject > &theObject)
	Removes theObject from children of current object in scene hierarchy with keeping the current global transformation. So the object keeps the same position/orientation in the global CS. More...

Standard_Boolean	HasOwnPresentations () const
	Returns true if object should have own presentations. More...

virtual void	BoundingBox (Bnd_Box &theBndBox)
	Returns bounding box of object correspondingly to its current display mode. This method requires presentation to be already computed, since it relies on bounding box of presentation structures, which are supposed to be same/close amongst different display modes of this object. More...

void	SetIsoOnTriangulation (const Standard_Boolean theIsEnabled)
	Enables or disables on-triangulation build of isolines according to the flag given. More...

Aspect_TypeOfFacingModel	CurrentFacingModel () const
	Returns the current facing model which is in effect. More...

void	SetCurrentFacingModel (const Aspect_TypeOfFacingModel theModel=Aspect_TOFM_BOTH_SIDE)
	change the current facing model apply on polygons for SetColor(), SetTransparency(), SetMaterial() methods default facing model is Aspect_TOFM_TWO_SIDE. This mean that attributes is applying both on the front and back face. More...

Standard_Boolean	HasColor () const
	Returns true if the Interactive Object has color. More...

Standard_Boolean	HasWidth () const
	Returns true if the Interactive Object has width. More...

Standard_Real	Width () const
	Returns the width setting of the Interactive Object. More...

Standard_Boolean	HasMaterial () const
	Returns true if the Interactive Object has a setting for material. More...

Standard_Boolean	IsTransparent () const
	Returns true if there is a transparency setting. More...

virtual Standard_Boolean	HasPolygonOffsets () const
	Returns Standard_True if <myDrawer> has non-null shading aspect. More...

virtual void	PolygonOffsets (Standard_Integer &aMode, Standard_ShortReal &aFactor, Standard_ShortReal &aUnits) const
	Retrieves current polygon offsets settings from <myDrawer>. More...

virtual void	SetPolygonOffsets (const Standard_Integer aMode, const Standard_ShortReal aFactor=1.0, const Standard_ShortReal aUnits=0.0)
	Sets up polygon offsets for this object. More...

virtual void	UnsetAttributes ()
	Clears settings provided by the drawing tool aDrawer. More...

void	ToBeUpdated (TColStd_ListOfInteger &ListOfMode) const
	gives the list of modes which are flagged "to be updated". More...

void	SetClipPlanes (const Graphic3d_SequenceOfHClipPlane &thePlanes)

void	SetTransformPersistence (const Graphic3d_TransModeFlags theMode, const gp_Pnt &thePoint=gp_Pnt(0.0, 0.0, 0.0))
	Sets up Transform Persistence Mode for this object. This function used to lock in object position, rotation and / or zooming relative to camera position. Object will be drawn in the origin setted by thePoint parameter (except Graphic3d_TMF_TriedronPers flag. More...

Graphic3d_TransModeFlags	GetTransformPersistenceMode () const
	Gets Transform Persistence Mode for this object. More...

gp_Pnt	GetTransformPersistencePoint () const
	Gets point of transform persistence for this object. More...

Standard_Boolean	ToPropagateVisualState () const
	Get value of the flag "propagate visual state" It means that the display/erase/color visual state is propagated automatically to all children; by default, the flag is true. More...

void	SetPropagateVisualState (const Standard_Boolean theFlag)
	Change the value of the flag "propagate visual state". More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Static Public Member Functions
static TopAbs_ShapeEnum	SelectionType (const Standard_Integer theSelMode)
	Return shape type for specified selection mode. More...

static Standard_Integer	SelectionMode (const TopAbs_ShapeEnum theShapeType)
	Return selection mode for specified shape type. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

methods to alter texture mapping properties
TopoDS_Shape	myshape
	shape to display More...

Bnd_Box	myBB
	cached bounding box of the shape More...

gp_Pnt2d	myUVOrigin
	UV origin vector for generating texture coordinates. More...

gp_Pnt2d	myUVRepeat
	UV repeat vector for generating texture coordinates. More...

gp_Pnt2d	myUVScale
	UV scale vector for generating texture coordinates. More...

Standard_Real	myInitAng
	shape to display More...

Standard_Boolean	myCompBB
	if TRUE, then bounding box should be recomputed More...

const gp_Pnt2d &	TextureRepeatUV () const
	Return texture repeat UV values; (1, 1) by default. More...

void	SetTextureRepeatUV (const gp_Pnt2d &theRepeatUV)
	Sets the number of occurrences of the texture on each face. The texture itself is parameterized in (0,1) by (0,1). Each face of the shape to be textured is parameterized in UV space (Umin,Umax) by (Vmin,Vmax). More...

const gp_Pnt2d &	TextureOriginUV () const
	Return texture origin UV position; (0, 0) by default. More...

void	SetTextureOriginUV (const gp_Pnt2d &theOriginUV)
	Use this method to change the origin of the texture. The texel (0,0) will be mapped to the surface (myUVOrigin.X(), myUVOrigin.Y()). More...

const gp_Pnt2d &	TextureScaleUV () const
	Return scale factor for UV coordinates; (1, 1) by default. More...

void	SetTextureScaleUV (const gp_Pnt2d &theScaleUV)
	Use this method to scale the texture (percent of the face). You can specify a scale factor for both U and V. Example: if you set ScaleU and ScaleV to 0.5 and you enable texture repeat, the texture will appear twice on the face in each direction. More...

static void	computeHlrPresentation (const Handle< Prs3d_Projector > &theProjector, const Handle< Prs3d_Presentation > &thePrs, const TopoDS_Shape &theShape, const Handle< Prs3d_Drawer > &theDrawer)
	Compute HLR presentation for specified shape. More...

virtual void	Compute (const Handle< PrsMgr_PresentationManager3d > &thePrsMgr, const Handle< Prs3d_Presentation > &thePrs, const Standard_Integer theMode) override
	Compute normal presentation. More...

virtual void	Compute (const Handle< Prs3d_Projector > &theProjector, const Handle< Prs3d_Presentation > &thePrs) override
	Compute projected presentation. More...

virtual void	Compute (const Handle< Prs3d_Projector > &theProjector, const Handle< Geom_Transformation > &theTrsf, const Handle< Prs3d_Presentation > &thePrs) override
	Compute projected presentation with transformation. More...

virtual void	ComputeSelection (const Handle< SelectMgr_Selection > &theSelection, const Standard_Integer theMode) override
	Compute selection. More...

bool	setColor (const Handle< Prs3d_Drawer > &theDrawer, const Quantity_Color &theColor) const
	Create own aspects (if they do not exist) and set color to them. More...

bool	setWidth (const Handle< Prs3d_Drawer > &theDrawer, const Standard_Real theWidth) const
	Create own aspects (if they do not exist) and set width to them. More...

void	setTransparency (const Handle< Prs3d_Drawer > &theDrawer, const Standard_Real theValue) const
	shape to display More...

void	setMaterial (const Handle< Prs3d_Drawer > &theDrawer, const Graphic3d_MaterialAspect &theMaterial, const Standard_Boolean theToKeepColor, const Standard_Boolean theToKeepTransp) const
	shape to display More...

void	replaceWithNewOwnAspects ()
	Replace aspects of already computed groups from drawer link by the new own value. More...

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Protected Member Functions inherited from AIS_InteractiveObject
	AIS_InteractiveObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)
	The TypeOfPresention3d means that the interactive object may have a presentation dependant of the view of Display. More...

Protected Member Functions inherited from SelectMgr_SelectableObject
	SelectMgr_SelectableObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)
	Protected empty constructor. More...

void	setGlobalSelMode (const Standard_Integer theMode)
	Override global selection mode. More...

virtual void	UpdateClipping () override
	Update clipping planes state. More...

virtual void	updateSelection (const Standard_Integer theMode)
	Sets update status FULL to selections of the object. Must be used as the only method of UpdateSelection from outer classes to prevent BVH structures from being outdated. More...

Protected Member Functions inherited from PrsMgr_PresentableObject
void	Update (Standard_Boolean theToIncludeHidden=Standard_False)
	Recomputes all presentations of the object. More...

void	Update (Standard_Integer theMode, Standard_Boolean theToClearOther)
	Recomputes the presentation in the given mode. More...

	PrsMgr_PresentableObject (const PrsMgr_TypeOfPresentation3d aTypeOfPresentation3d=PrsMgr_TOP_AllView)
	Protected empty constructor. More...

virtual	~PrsMgr_PresentableObject ()
	Destructor. More...

virtual void	Fill (const Handle< PrsMgr_PresentationManager > &thePrsMgr, const Handle< PrsMgr_Presentation > &thePrs, const Standard_Integer theMode)
	Fills the given 3D view presentation for specified display mode using Compute() method. In addition, configures other properties of presentation (transformation, clipping planes). More...

Standard_Boolean	UpdatePresentations (Standard_Boolean theToIncludeHidden=Standard_False)
	Recomputes invalidated presentations of the object. More...

virtual void	SetCombinedParentTransform (const Handle< Geom_Transformation > &theTrsf)
	Sets myCombinedParentTransform to theTransformation. Thus object receives transformation from parent node and able to derive its own. More...

virtual void	setLocalTransformation (const Handle< Geom_Transformation > &theTransformation)
	Sets local transformation to theTransformation. More...

void	recomputeComputed () const
	Recompute computed (HLR) presentations (when view is in computed mode). More...

void	replaceAspects (const Graphic3d_MapOfAspectsToAspects &theMap)
	Replace aspects of existing (computed) presentation groups, so that the new aspects can be applied without recomputing presentation. It is NOT recommended approach, because user has to fill such map and then search for each occurrence in computed groups. The recommended approach is computing presentation with necessary customized aspects, and then modify them directly followed by SynchronizeAspects() call. More...

Static Protected Member Functions inherited from PrsMgr_PresentableObject
static const gp_Trsf &	getIdentityTrsf ()
	Return the identity transformation. More...

Protected Attributes inherited from AIS_InteractiveObject
AIS_InteractiveContext *	myCTXPtr
	pointer to Interactive Context, where object is currently displayed; More...

Handle< Standard_Transient >	myOwner
	application-specific owner object More...

Protected Attributes inherited from SelectMgr_SelectableObject
SelectMgr_SequenceOfSelection	myselections
	list of selections More...

Handle< Prs3d_Presentation >	mySelectionPrs
	optional presentation for highlighting selected object More...

Handle< Prs3d_Presentation >	myHilightPrs
	optional presentation for highlighting detected object More...

Standard_Integer	myGlobalSelMode
	global selection mode More...

Standard_Integer	mycurrent
	[deprecated] iterator value More...

Standard_Boolean	myAutoHilight
	auto-highlighting flag defining More...

Protected Attributes inherited from PrsMgr_PresentableObject
PrsMgr_PresentableObject *	myParent
	pointer to the parent object More...

PrsMgr_Presentations	myPresentations
	list of presentations More...

Handle< Graphic3d_SequenceOfHClipPlane >	myClipPlanes
	sequence of object-specific clipping planes More...

Handle< Prs3d_Drawer >	myDrawer
	main presentation attributes More...

Handle< Prs3d_Drawer >	myHilightDrawer
	(optional) custom presentation attributes for highlighting selected object More...

Handle< Prs3d_Drawer >	myDynHilightDrawer
	(optional) custom presentation attributes for highlighting detected object More...

Handle< Graphic3d_TransformPers >	myTransformPersistence
	transformation persistence More...

Handle< Geom_Transformation >	myLocalTransformation
	local transformation relative to parent object More...

Handle< Geom_Transformation >	myTransformation
	absolute transformation of this object (combined parents + local transformations) More...

Handle< Geom_Transformation >	myCombinedParentTransform
	transformation of parent object (combined for all parents) More...

PrsMgr_ListOfPresentableObjects	myChildren
	list of children More...

gp_GTrsf	myInvTransformation
	inversion of absolute transformation (combined parents + local transformations) More...

PrsMgr_TypeOfPresentation3d	myTypeOfPresentation3d
	presentation type More...

Aspect_TypeOfFacingModel	myCurrentFacingModel
	current facing model More...

Standard_ShortReal	myOwnWidth
	custom width value More...

Standard_Boolean	hasOwnColor
	own color flag More...

Standard_Boolean	hasOwnMaterial
	own material flag More...

Standard_Boolean	myInfiniteState
	infinite flag More...

Standard_Boolean	myIsMutable
	mutable flag More...

Standard_Boolean	myHasOwnPresentations
	flag indicating if object should have own presentations More...

Standard_Boolean	myToPropagateVisualState
	flag indicating if visual state (display/erase/color) should be propagated to all children More...

Detailed Description

A framework to manage presentation and selection of shapes. AIS_Shape is the interactive object which is used the most by applications. There are standard functions available which allow you to prepare selection operations on the constituent elements of shapes - vertices, edges, faces etc - in an open local context. The selection modes specific to "Shape" type objects are referred to as Standard Activation Mode. These modes are only taken into account in open local context and only act on Interactive Objects which have redefined the virtual method AcceptShapeDecomposition so that it returns true. Several advanced functions are also available. These include functions to manage deviation angle and deviation coefficient - both HLR and non-HLR - of an inheriting shape class. These services allow you to select one type of shape interactive object for higher precision drawing. When you do this, the Prs3d_Drawer::IsOwn... functions corresponding to the above deviation angle and coefficient functions return true indicating that there is a local setting available for the specific object.

This class allows to map textures on shapes using native UV parametric space of underlying surface of each Face (this means that texture will be visually duplicated on all Faces). To generate texture coordinates, appropriate shading attribute should be set before computing presentation in AIS_Shaded display mode:

Handle(AIS_Shape) aPrs = new AIS_Shape();
aPrs->Attributes()->SetupOwnShadingAspect();
aPrs->Attributes()->ShadingAspect()->Aspect()->SetTextureMapOn();
aPrs->Attributes()->ShadingAspect()->Aspect()->SetTextureMap (new Graphic3d_Texture2Dmanual (Graphic3d_NOT_2D_ALUMINUM));

The texture itself is parametrized in (0,1)x(0,1).

Constructor & Destructor Documentation

◆ AIS_Shape()

AIS_Shape::AIS_Shape ( const TopoDS_Shape & shap )

Initializes construction of the shape shap from wires, edges and vertices.

Member Function Documentation

◆ AcceptDisplayMode()

virtual Standard_Boolean AIS_Shape::AcceptDisplayMode ( const Standard_Integer theMode ) const

inlineoverridevirtual

Return true if specified display mode is supported.

Reimplemented from PrsMgr_PresentableObject.

Reimplemented in AIS_TexturedShape.

◆ AcceptShapeDecomposition()

virtual Standard_Boolean AIS_Shape::AcceptShapeDecomposition ( ) const

inlineoverridevirtual

Returns true if the Interactive Object accepts shape decomposition.

Reimplemented from SelectMgr_SelectableObject.

◆ BoundingBox()

virtual const Bnd_Box& AIS_Shape::BoundingBox ( )

virtual

Constructs a bounding box with which to reconstruct compound topological shapes for presentation.

◆ Color()

virtual void AIS_Shape::Color ( Quantity_Color & aColor ) const

overridevirtual

Returns the Color attributes of the shape accordingly to the current facing model;.

Reimplemented from PrsMgr_PresentableObject.

◆ Compute() [1/3]

virtual void AIS_Shape::Compute	(	const Handle< PrsMgr_PresentationManager3d > &	thePrsMgr,
		const Handle< Prs3d_Presentation > &	thePrs,
		const Standard_Integer	theMode
	)

overrideprotectedvirtual

Compute normal presentation.

Implements PrsMgr_PresentableObject.

Reimplemented in AIS_TexturedShape, AIS_ColoredShape, and XCAFPrs_AISObject.

◆ Compute() [2/3]

virtual void AIS_Shape::Compute	(	const Handle< Prs3d_Projector > &	theProjector,
		const Handle< Prs3d_Presentation > &	thePrs
	)

inlineoverrideprotectedvirtual

Compute projected presentation.

Reimplemented from PrsMgr_PresentableObject.

◆ Compute() [3/3]

virtual void AIS_Shape::Compute	(	const Handle< Prs3d_Projector > &	theProjector,
		const Handle< Geom_Transformation > &	theTrsf,
		const Handle< Prs3d_Presentation > &	thePrs
	)

inlineoverrideprotectedvirtual

Compute projected presentation with transformation.

Reimplemented from PrsMgr_PresentableObject.

◆ computeHlrPresentation()

static void AIS_Shape::computeHlrPresentation	(	const Handle< Prs3d_Projector > &	theProjector,
		const Handle< Prs3d_Presentation > &	thePrs,
		const TopoDS_Shape &	theShape,
		const Handle< Prs3d_Drawer > &	theDrawer
	)

static

Compute HLR presentation for specified shape.

◆ ComputeSelection()

virtual void AIS_Shape::ComputeSelection	(	const Handle< SelectMgr_Selection > &	theSelection,
		const Standard_Integer	theMode
	)

overrideprotectedvirtual

Compute selection.

Implements SelectMgr_SelectableObject.

Reimplemented in AIS_ColoredShape.

◆ Material()

virtual Graphic3d_NameOfMaterial AIS_Shape::Material ( ) const

overridevirtual

Returns the NameOfMaterial attributes of the shape accordingly to the current facing model;.

Reimplemented from PrsMgr_PresentableObject.

◆ OwnDeviationAngle()

Standard_Boolean AIS_Shape::OwnDeviationAngle	(	Standard_Real &	anAngle,
		Standard_Real &	aPreviousAngle
	)		const

Returns true and the values of the deviation angle anAngle and the previous deviation angle aPreviousAngle. If these values are not already set, false is returned.

◆ OwnDeviationCoefficient()

Standard_Boolean AIS_Shape::OwnDeviationCoefficient	(	Standard_Real &	aCoefficient,
		Standard_Real &	aPreviousCoefficient
	)		const

Returns true and the values of the deviation coefficient aCoefficient and the previous deviation coefficient aPreviousCoefficient. If these values are not already set, false is returned.

◆ OwnHLRDeviationAngle()

Standard_Boolean AIS_Shape::OwnHLRDeviationAngle	(	Standard_Real &	anAngle,
		Standard_Real &	aPreviousAngle
	)		const

Returns true and the values of the HLR deviation angle anAngle and of the previous HLR deviation angle aPreviousAngle. If these values are not already set, false is returned.

◆ OwnHLRDeviationCoefficient()

Standard_Boolean AIS_Shape::OwnHLRDeviationCoefficient	(	Standard_Real &	aCoefficient,
		Standard_Real &	aPreviousCoefficient
	)		const

Returns true and the values of the HLR deviation coefficient aCoefficient and the previous HLR deviation coefficient aPreviousCoefficient. If these values are not already set, false is returned.

◆ replaceWithNewOwnAspects()

void AIS_Shape::replaceWithNewOwnAspects ( )

protected

Replace aspects of already computed groups from drawer link by the new own value.

◆ SelectionMode()

static Standard_Integer AIS_Shape::SelectionMode ( const TopAbs_ShapeEnum theShapeType )

inlinestatic

Return selection mode for specified shape type.

◆ SelectionType()

static TopAbs_ShapeEnum AIS_Shape::SelectionType ( const Standard_Integer theSelMode )

inlinestatic

Return shape type for specified selection mode.

◆ Set()

void AIS_Shape::Set ( const TopoDS_Shape & theShape )

inline

Alias for ::SetShape().

◆ SetAngleAndDeviation()

void AIS_Shape::SetAngleAndDeviation ( const Standard_Real anAngle )

this compute a new angle and Deviation from the value anAngle and set the values stored in myDrawer with these that become local to the shape

◆ SetColor()

virtual void AIS_Shape::SetColor ( const Quantity_Color & theColor )

overridevirtual

Sets the color aColor in the reconstructed compound shape. Acts via the Drawer methods below on the appearance of:

free boundaries: Prs3d_Drawer_FreeBoundaryAspect,
isos: Prs3d_Drawer_UIsoAspect, Prs3dDrawer_VIsoAspect,
shared boundaries: Prs3d_Drawer_UnFreeBoundaryAspect,
shading: Prs3d_Drawer_ShadingAspect,
visible line color in hidden line mode: Prs3d_Drawer_SeenLineAspect
hidden line color in hidden line mode: Prs3d_Drawer_HiddenLineAspect.

Reimplemented from PrsMgr_PresentableObject.

Reimplemented in AIS_TexturedShape, and AIS_ColoredShape.

◆ setColor()

bool AIS_Shape::setColor	(	const Handle< Prs3d_Drawer > &	theDrawer,
		const Quantity_Color &	theColor
	)		const

protected

Create own aspects (if they do not exist) and set color to them.

Returns: TRUE if new aspects have been created

◆ SetHLRAngleAndDeviation()

void AIS_Shape::SetHLRAngleAndDeviation ( const Standard_Real anAngle )

this compute a new Angle and Deviation from the value anAngle for HLR and set the values stored in myDrawer for with these that become local to the shape

◆ SetMaterial()

virtual void AIS_Shape::SetMaterial ( const Graphic3d_MaterialAspect & aName )

overridevirtual

Allows you to provide settings for the material aName in the reconstructed compound shape.

Reimplemented from PrsMgr_PresentableObject.

Reimplemented in AIS_TexturedShape, AIS_ColoredShape, and XCAFPrs_AISObject.

◆ setMaterial()

void AIS_Shape::setMaterial	(	const Handle< Prs3d_Drawer > &	theDrawer,
		const Graphic3d_MaterialAspect &	theMaterial,
		const Standard_Boolean	theToKeepColor,
		const Standard_Boolean	theToKeepTransp
	)		const

protected

shape to display

◆ SetOwnDeviationAngle() [1/2]

Standard_Boolean AIS_Shape::SetOwnDeviationAngle ( )

Sets a local value for deviation angle for this specific shape.

◆ SetOwnDeviationAngle() [2/2]

void AIS_Shape::SetOwnDeviationAngle ( const Standard_Real anAngle )

sets myOwnDeviationAngle field in Prs3d_Drawer & recomputes presentation

◆ SetOwnDeviationCoefficient() [1/2]

Standard_Boolean AIS_Shape::SetOwnDeviationCoefficient ( )

Sets a local value for deviation coefficient for this specific shape.

◆ SetOwnDeviationCoefficient() [2/2]

void AIS_Shape::SetOwnDeviationCoefficient ( const Standard_Real aCoefficient )

Sets a local value for deviation coefficient for this specific shape.

◆ SetOwnHLRDeviationAngle() [1/2]

Standard_Boolean AIS_Shape::SetOwnHLRDeviationAngle ( )

Sets a local value for HLR deviation angle for this specific shape.

◆ SetOwnHLRDeviationAngle() [2/2]

void AIS_Shape::SetOwnHLRDeviationAngle ( const Standard_Real anAngle )

sets myOwnHLRDeviationAngle field in Prs3d_Drawer & recomputes presentation

◆ SetOwnHLRDeviationCoefficient() [1/2]

Standard_Boolean AIS_Shape::SetOwnHLRDeviationCoefficient ( )

Sets a local value for HLR deviation coefficient for this specific shape.

◆ SetOwnHLRDeviationCoefficient() [2/2]

void AIS_Shape::SetOwnHLRDeviationCoefficient ( const Standard_Real aCoefficient )

sets myOwnHLRDeviationCoefficient field in Prs3d_Drawer & recomputes presentation

◆ SetShape()

void AIS_Shape::SetShape ( const TopoDS_Shape & theShape )

inline

Constructs an instance of the shape object theShape.

◆ SetTextureOriginUV()

void AIS_Shape::SetTextureOriginUV ( const gp_Pnt2d & theOriginUV )

inline

Use this method to change the origin of the texture. The texel (0,0) will be mapped to the surface (myUVOrigin.X(), myUVOrigin.Y()).

◆ SetTextureRepeatUV()

void AIS_Shape::SetTextureRepeatUV ( const gp_Pnt2d & theRepeatUV )

inline

Sets the number of occurrences of the texture on each face. The texture itself is parameterized in (0,1) by (0,1). Each face of the shape to be textured is parameterized in UV space (Umin,Umax) by (Vmin,Vmax).

◆ SetTextureScaleUV()

void AIS_Shape::SetTextureScaleUV ( const gp_Pnt2d & theScaleUV )

inline

Use this method to scale the texture (percent of the face). You can specify a scale factor for both U and V. Example: if you set ScaleU and ScaleV to 0.5 and you enable texture repeat, the texture will appear twice on the face in each direction.

◆ SetTransparency()

virtual void AIS_Shape::SetTransparency ( const Standard_Real aValue = 0.6 )

overridevirtual

Sets the value aValue for transparency in the reconstructed compound shape.

Reimplemented from PrsMgr_PresentableObject.

Reimplemented in AIS_ColoredShape.

◆ setTransparency()

void AIS_Shape::setTransparency	(	const Handle< Prs3d_Drawer > &	theDrawer,
		const Standard_Real	theValue
	)		const

protected

shape to display

◆ SetTypeOfHLR()

void AIS_Shape::SetTypeOfHLR ( const Prs3d_TypeOfHLR theTypeOfHLR )

inline

Sets the type of HLR algorithm used by the shape.

◆ SetWidth()

virtual void AIS_Shape::SetWidth ( const Standard_Real aValue )

overridevirtual

Sets the value aValue for line width in the reconstructed compound shape. Changes line aspects for lines presentation.

Reimplemented from PrsMgr_PresentableObject.

Reimplemented in AIS_ColoredShape.

◆ setWidth()

bool AIS_Shape::setWidth	(	const Handle< Prs3d_Drawer > &	theDrawer,
		const Standard_Real	theWidth
	)		const

protected

Create own aspects (if they do not exist) and set width to them.

Returns: TRUE if new aspects have been created

◆ Shape()

const TopoDS_Shape& AIS_Shape::Shape ( ) const

inline

Returns this shape object.

◆ Signature()

virtual Standard_Integer AIS_Shape::Signature ( ) const

inlineoverridevirtual

Returns index 0. This value refers to SHAPE from TopAbs_ShapeEnum.

Reimplemented from AIS_InteractiveObject.

◆ TextureOriginUV()

const gp_Pnt2d& AIS_Shape::TextureOriginUV ( ) const

inline

Return texture origin UV position; (0, 0) by default.

◆ TextureRepeatUV()

const gp_Pnt2d& AIS_Shape::TextureRepeatUV ( ) const

inline

Return texture repeat UV values; (1, 1) by default.

◆ TextureScaleUV()

const gp_Pnt2d& AIS_Shape::TextureScaleUV ( ) const

inline

Return scale factor for UV coordinates; (1, 1) by default.

◆ Transparency()

virtual Standard_Real AIS_Shape::Transparency ( ) const

overridevirtual

Returns the transparency attributes of the shape accordingly to the current facing model;.

Reimplemented from PrsMgr_PresentableObject.

◆ Type()

virtual AIS_KindOfInteractive AIS_Shape::Type ( ) const

inlineoverridevirtual

Returns Object as the type of Interactive Object.

Reimplemented from AIS_InteractiveObject.

◆ TypeOfHLR()

Prs3d_TypeOfHLR AIS_Shape::TypeOfHLR ( ) const

inline

Gets the type of HLR algorithm.

◆ UnsetColor()

virtual void AIS_Shape::UnsetColor ( )

overridevirtual

Removes settings for color in the reconstructed compound shape.

Reimplemented from PrsMgr_PresentableObject.

Reimplemented in AIS_TexturedShape.

◆ UnsetMaterial()

virtual void AIS_Shape::UnsetMaterial ( )

overridevirtual

Removes settings for material in the reconstructed compound shape.

Reimplemented from PrsMgr_PresentableObject.

Reimplemented in AIS_TexturedShape.

◆ UnsetTransparency()

virtual void AIS_Shape::UnsetTransparency ( )

overridevirtual

Removes the setting for transparency in the reconstructed compound shape.

Reimplemented from PrsMgr_PresentableObject.

Reimplemented in AIS_ColoredShape.

◆ UnsetWidth()

virtual void AIS_Shape::UnsetWidth ( )

overridevirtual

Removes the setting for line width in the reconstructed compound shape.

Reimplemented from PrsMgr_PresentableObject.

Reimplemented in AIS_ColoredShape.

◆ UserAngle()

Standard_Real AIS_Shape::UserAngle ( ) const

gives back the angle initial value put by the User.

Field Documentation

◆ myBB

Bnd_Box AIS_Shape::myBB

protected

cached bounding box of the shape

◆ myCompBB

Standard_Boolean AIS_Shape::myCompBB

protected

if TRUE, then bounding box should be recomputed

◆ myInitAng

Standard_Real AIS_Shape::myInitAng

protected

shape to display

◆ myshape

TopoDS_Shape AIS_Shape::myshape

protected

shape to display

◆ myUVOrigin

gp_Pnt2d AIS_Shape::myUVOrigin

protected

UV origin vector for generating texture coordinates.

◆ myUVRepeat

gp_Pnt2d AIS_Shape::myUVRepeat

protected

UV repeat vector for generating texture coordinates.

◆ myUVScale

gp_Pnt2d AIS_Shape::myUVScale

protected

UV scale vector for generating texture coordinates.

The documentation for this class was generated from the following file:

AIS_Shape.hxx

Public Member Functions

Static Public Member Functions

methods to alter texture mapping properties

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ AIS_Shape()

Member Function Documentation

◆ AcceptDisplayMode()

◆ AcceptShapeDecomposition()

◆ BoundingBox()

◆ Color()

◆ Compute() [1/3]

◆ Compute() [2/3]

◆ Compute() [3/3]

◆ computeHlrPresentation()

◆ ComputeSelection()

◆ Material()

◆ OwnDeviationAngle()

◆ OwnDeviationCoefficient()

◆ OwnHLRDeviationAngle()

◆ OwnHLRDeviationCoefficient()

◆ replaceWithNewOwnAspects()

◆ SelectionMode()

◆ SelectionType()

◆ Set()

◆ SetAngleAndDeviation()

◆ SetColor()

◆ setColor()

◆ SetHLRAngleAndDeviation()

◆ SetMaterial()

◆ setMaterial()

◆ SetOwnDeviationAngle() [1/2]

◆ SetOwnDeviationAngle() [2/2]

◆ SetOwnDeviationCoefficient() [1/2]

◆ SetOwnDeviationCoefficient() [2/2]

◆ SetOwnHLRDeviationAngle() [1/2]

◆ SetOwnHLRDeviationAngle() [2/2]

◆ SetOwnHLRDeviationCoefficient() [1/2]

◆ SetOwnHLRDeviationCoefficient() [2/2]

◆ SetShape()

◆ SetTextureOriginUV()

◆ SetTextureRepeatUV()

◆ SetTextureScaleUV()

◆ SetTransparency()

◆ setTransparency()

◆ SetTypeOfHLR()

◆ SetWidth()

◆ setWidth()

◆ Shape()

◆ Signature()

◆ TextureOriginUV()

◆ TextureRepeatUV()

◆ TextureScaleUV()

◆ Transparency()

◆ Type()

◆ TypeOfHLR()

◆ UnsetColor()

◆ UnsetMaterial()

◆ UnsetTransparency()

◆ UnsetWidth()

◆ UserAngle()

Field Documentation

◆ myBB

◆ myCompBB

◆ myInitAng

◆ myshape

◆ myUVOrigin

◆ myUVRepeat

◆ myUVScale