The Interactive Context allows you to manage graphic behavior and selection of Interactive Objects in one or more viewers. Class methods make this highly transparent. It is essential to remember that an Interactive Object which is already known by the Interactive Context must be modified using Context methods. You can only directly call the methods available for an Interactive Object if it has not been loaded into an Interactive Context. More...

#include <AIS_InteractiveContext.hxx>

Inheritance diagram for AIS_InteractiveContext:

[legend]

Public Member Functions
object display management
	AIS_InteractiveContext (const Handle< V3d_Viewer > &MainViewer)
	Constructs the interactive context object defined by the principal viewer MainViewer. More...

virtual	~AIS_InteractiveContext ()
	Destructor. More...

AIS_DisplayStatus	DisplayStatus (const Handle< AIS_InteractiveObject > &anIobj) const
	Returns the display status of the entity anIobj. This will be one of the following: More...

void	Status (const Handle< AIS_InteractiveObject > &anObj, TCollection_ExtendedString &astatus) const
	Returns the status of the Interactive Context for the view of the Interactive Object. More...

Standard_Boolean	IsDisplayed (const Handle< AIS_InteractiveObject > &anIobj) const
	Returns true if Object is displayed in the interactive context. More...

Standard_Boolean	IsDisplayed (const Handle< AIS_InteractiveObject > &aniobj, const Standard_Integer aMode) const
	Constructs the interactive context object defined by the principal viewer MainViewer. More...

void	SetAutoActivateSelection (const Standard_Boolean theIsAuto)
	Enable or disable automatic activation of default selection mode while displaying the object. More...

Standard_Boolean	GetAutoActivateSelection () const
	Manages displaying the new object should also automatically activate default selection mode; TRUE by default. More...

void	Display (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Boolean theToUpdateViewer)
	Displays the object in this Context using default Display Mode. This will be the object's default display mode, if there is one. Otherwise, it will be the context mode. The Interactive Object's default selection mode is activated if GetAutoActivateSelection() is TRUE. In general, this is 0. More...

void	Display (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Integer theDispMode, const Standard_Integer theSelectionMode, const Standard_Boolean theToUpdateViewer, const AIS_DisplayStatus theDispStatus=AIS_DS_None)
	Sets status, display mode and selection mode for specified Object If theSelectionMode equals -1, theIObj will not be activated: it will be displayed but will not be selectable. More...

void	Load (const Handle< AIS_InteractiveObject > &theObj, const Standard_Integer theSelectionMode=-1)
	Allows you to load the Interactive Object with a given selection mode, and/or with the desired decomposition option, whether the object is visualized or not. The loaded objects will be selectable but displayable in highlighting only when detected by the Selector. More...

void	Display (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Integer theDispMode, const Standard_Integer theSelectionMode, const Standard_Boolean theToUpdateViewer, const Standard_Boolean theToAllowDecomposition, const AIS_DisplayStatus theDispStatus=AIS_DS_None)

void	Load (const Handle< AIS_InteractiveObject > &theObj, Standard_Integer theSelectionMode, Standard_Boolean)

void	Erase (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Boolean theToUpdateViewer)
	Hides the object. The object's presentations are simply flagged as invisible and therefore excluded from redrawing. To show hidden objects, use Display(). More...

void	EraseAll (const Standard_Boolean theToUpdateViewer)
	Hides all objects. The object's presentations are simply flagged as invisible and therefore excluded from redrawing. To show all hidden objects, use DisplayAll(). More...

void	DisplayAll (const Standard_Boolean theToUpdateViewer)
	Displays all hidden objects. More...

void	EraseSelected (const Standard_Boolean theToUpdateViewer)
	Hides selected objects. The object's presentations are simply flagged as invisible and therefore excluded from redrawing. To show hidden objects, use Display(). More...

void	DisplaySelected (const Standard_Boolean theToUpdateViewer)
	Displays current objects. More...

void	ClearPrs (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Integer theMode, const Standard_Boolean theToUpdateViewer)
	Empties the graphic presentation of the mode indexed by aMode. Warning! Removes theIObj. theIObj is still active if it was previously activated. More...

void	Remove (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Boolean theToUpdateViewer)
	Removes Object from every viewer. More...

void	RemoveAll (const Standard_Boolean theToUpdateViewer)
	Removes all the objects from Context. More...

void	Redisplay (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Boolean theToUpdateViewer, const Standard_Boolean theAllModes=Standard_False)
	Recomputes the seen parts presentation of the Object. If theAllModes equals true, all presentations are present in the object even if unseen. More...

void	Redisplay (const AIS_KindOfInteractive theTypeOfObject, const Standard_Integer theSignature, const Standard_Boolean theToUpdateViewer)
	Recomputes the Prs/Selection of displayed objects of a given type and a given signature. if signature = -1 doesn't take signature criterion. More...

void	RecomputePrsOnly (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Boolean theToUpdateViewer, const Standard_Boolean theAllModes=Standard_False)
	Recomputes the displayed presentations, flags the others. Doesn't update presentations. More...

void	RecomputeSelectionOnly (const Handle< AIS_InteractiveObject > &anIObj)
	Recomputes the active selections, flags the others. Doesn't update presentations. More...

void	Update (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Boolean theUpdateViewer)
	Updates displayed interactive object by checking and recomputing its flagged as "to be recomputed" presentation and selection structures. This method does not force any recomputation on its own. The method recomputes selections even if they are loaded without activation in particular selector. More...

highlighting management
const Handle< Prs3d_Drawer > &	HighlightStyle (const Prs3d_TypeOfHighlight theStyleType) const
	Returns highlight style settings. More...

void	SetHighlightStyle (const Prs3d_TypeOfHighlight theStyleType, const Handle< Prs3d_Drawer > &theStyle)
	Setup highlight style settings. It is preferred modifying existing style returned by method HighlightStyle() instead of creating a new drawer. More...

const Handle< Prs3d_Drawer > &	HighlightStyle () const
	Returns current dynamic highlight style settings. By default: More...

void	SetHighlightStyle (const Handle< Prs3d_Drawer > &theStyle)
	Setup the style of dynamic highlighting. It is preferred modifying existing style returned by method HighlightStyle() instead of creating a new drawer. More...

const Handle< Prs3d_Drawer > &	SelectionStyle () const
	Returns current selection style settings. By default: More...

void	SetSelectionStyle (const Handle< Prs3d_Drawer > &theStyle)
	Setup the style of selection highlighting. More...

Standard_Boolean	HighlightStyle (const Handle< AIS_InteractiveObject > &theObj, Handle< Prs3d_Drawer > &theStyle) const
	Returns highlight style of the object if it is marked as highlighted via global status. More...

Standard_Boolean	HighlightStyle (const Handle< SelectMgr_EntityOwner > &theOwner, Handle< Prs3d_Drawer > &theStyle) const
	Returns highlight style of the owner if it is selected. More...

Standard_Boolean	IsHilighted (const Handle< AIS_InteractiveObject > &theObj) const
	Returns true if the object is marked as highlighted via its global status. More...

Standard_Boolean	IsHilighted (const Handle< SelectMgr_EntityOwner > &theOwner) const
	Returns true if the owner is marked as selected. More...

void	Hilight (const Handle< AIS_InteractiveObject > &theObj, const Standard_Boolean theIsToUpdateViewer)
	Updates the display in the viewer to take dynamic detection into account. On dynamic detection by the mouse cursor, sensitive primitives are highlighted. The highlight color of entities detected by mouse movement is white by default. More...

void	HilightWithColor (const Handle< AIS_InteractiveObject > &theObj, const Handle< Prs3d_Drawer > &theStyle, const Standard_Boolean theToUpdateViewer)
	Changes the color of all the lines of the object in view. More...

void	Unhilight (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Boolean theToUpdateViewer)
	Removes hilighting from the Object. More...

object presence management (View affinity, Layer, Priority)
Standard_Integer	DisplayPriority (const Handle< AIS_InteractiveObject > &theIObj) const
	Returns the display priority of the Object. More...

void	SetDisplayPriority (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Integer thePriority)
	Sets the display priority of the seen parts presentation of the Object. More...

Graphic3d_ZLayerId	GetZLayer (const Handle< AIS_InteractiveObject > &theIObj) const
	Get Z layer id set for displayed interactive object. More...

void	SetZLayer (const Handle< AIS_InteractiveObject > &theIObj, const Graphic3d_ZLayerId theLayerId)
	Set Z layer id for interactive object. The Z layers can be used to display temporarily presentations of some object in front of the other objects in the scene. The ids for Z layers are generated by V3d_Viewer. More...

void	SetViewAffinity (const Handle< AIS_InteractiveObject > &theIObj, const Handle< V3d_View > &theView, const Standard_Boolean theIsVisible)
	Setup object visibility in specified view. Has no effect if object is not displayed in this context. More...

Display Mode management
Standard_Integer	DisplayMode () const
	Returns the Display Mode setting to be used by default. More...

void	SetDisplayMode (const Standard_Integer theMode, const Standard_Boolean theToUpdateViewer)
	Sets the display mode of seen Interactive Objects (which have no overridden Display Mode). More...

void	SetDisplayMode (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Integer theMode, const Standard_Boolean theToUpdateViewer)
	Sets the display mode of seen Interactive Objects. theMode provides the display mode index of the entity theIObj. More...

void	UnsetDisplayMode (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Boolean theToUpdateViewer)
	Unsets the display mode of seen Interactive Objects. More...

object local transformation management
void	SetLocation (const Handle< AIS_InteractiveObject > &theObject, const TopLoc_Location &theLocation)
	Puts the location on the initial graphic representation and the selection for the Object. More...

void	ResetLocation (const Handle< AIS_InteractiveObject > &theObject)
	Puts the Object back into its initial position. More...

Standard_Boolean	HasLocation (const Handle< AIS_InteractiveObject > &theObject) const
	Returns true if the Object has a location. More...

TopLoc_Location	Location (const Handle< AIS_InteractiveObject > &theObject) const
	Returns the location of the Object. More...

void	SetTransformPersistence (const Handle< AIS_InteractiveObject > &theObject, const Handle< Graphic3d_TransformPers > &theTrsfPers)
	Sets transform persistence. More...

void	SetTransformPersistence (const Handle< AIS_InteractiveObject > &theObj, const Graphic3d_TransModeFlags &theFlag, const gp_Pnt &thePoint=gp_Pnt(0.0, 0.0, 0.0))

mouse picking logic (detection and dynamic highlighting of entities under cursor)
void	SetPixelTolerance (const Standard_Integer thePrecision=2)
	Setup pixel tolerance for MoveTo() operation. More...

Standard_Integer	PixelTolerance () const
	Returns the pixel tolerance, default is 2. Pixel Tolerance extends sensitivity within MoveTo() operation (picking by point) and can be adjusted by application based on user input precision (e.g. screen pixel density, input device precision, etc.). More...

void	SetSelectionSensitivity (const Handle< AIS_InteractiveObject > &theObject, const Standard_Integer theMode, const Standard_Integer theNewSensitivity)
	Allows to manage sensitivity of a particular selection of interactive object theObject and changes previous sensitivity value of all sensitive entities in selection with theMode to the given theNewSensitivity. More...

Handle< V3d_View >	LastActiveView () const
	Returns last active View (argument of MoveTo()/Select() methods). More...

AIS_StatusOfDetection	MoveTo (const Standard_Integer theXPix, const Standard_Integer theYPix, const Handle< V3d_View > &theView, const Standard_Boolean theToRedrawOnUpdate)
	Relays mouse position in pixels theXPix and theYPix to the interactive context selectors. This is done by the view theView passing this position to the main viewer and updating it. If theToRedrawOnUpdate is set to false, callee should call RedrawImmediate() to highlight detected object. More...

Standard_Boolean	ClearDetected (Standard_Boolean theToRedrawImmediate=Standard_False)
	Clears the list of entities detected by MoveTo() and resets dynamic highlighting. More...

Standard_Boolean	HasDetected () const
	Returns true if there is a mouse-detected entity in context. More...

const Handle< SelectMgr_EntityOwner > &	DetectedOwner () const
	Returns the owner of the detected sensitive primitive which is currently dynamically highlighted. WARNING! This method is irrelevant to InitDetected()/MoreDetected()/NextDetected(). More...

Handle< AIS_InteractiveObject >	DetectedInteractive () const
	Returns the interactive objects last detected in context. In general this is just a wrapper for Handle(AIS_InteractiveObject)::DownCast(DetectedOwner()->Selectable()). More...

Standard_Boolean	HasDetectedShape () const
	Returns true if there is a detected shape in local context. More...

const TopoDS_Shape &	DetectedShape () const
	Returns the shape detected in local context. More...

Standard_Boolean	HasNextDetected () const
	returns True if other entities were detected in the last mouse detection More...

Standard_Integer	HilightNextDetected (const Handle< V3d_View > &theView, const Standard_Boolean theToRedrawImmediate=Standard_True)
	If more than 1 object is detected by the selector, only the "best" owner is hilighted at the mouse position. This Method allows the user to hilight one after another the other detected entities. If The method select is called, the selected entity will be the hilighted one! WARNING: Loop Method. When all the detected entities have been hilighted, the next call will hilight the first one again. More...

Standard_Integer	HilightPreviousDetected (const Handle< V3d_View > &theView, const Standard_Boolean theToRedrawImmediate=Standard_True)
	Same as previous methods in reverse direction. More...

iteration through detected entities
void	InitDetected ()
	Initialization for iteration through mouse-detected objects in interactive context or in local context if it is opened. More...

Standard_Boolean	MoreDetected () const
	Return TRUE if there is more mouse-detected objects after the current one during iteration through mouse-detected interactive objects. More...

void	NextDetected ()
	Gets next current object during iteration through mouse-detected interactive objects. More...

Handle< SelectMgr_EntityOwner >	DetectedCurrentOwner () const
	Returns the owner from detected list pointed by current iterator position. WARNING! This method is irrelevant to DetectedOwner() which returns last picked Owner regardless of iterator position! More...

Selection management
void	SetSelectedAspect (const Handle< Prs3d_BasicAspect > &theAspect, const Standard_Boolean theToUpdateViewer)
	Sets the graphic basic aspect to the current presentation of ALL selected objects. More...

AIS_StatusOfPick	AddSelect (const Handle< SelectMgr_EntityOwner > &theObject)
	Adds object in the selection. More...

AIS_StatusOfPick	AddSelect (const Handle< AIS_InteractiveObject > &theObject)
	Adds object in the selection. More...

AIS_StatusOfPick	Select (const Standard_Integer theXPMin, const Standard_Integer theYPMin, const Standard_Integer theXPMax, const Standard_Integer theYPMax, const Handle< V3d_View > &theView, const Standard_Boolean theToUpdateViewer)
	Selects everything found in the bounding rectangle defined by the pixel minima and maxima, XPMin, YPMin, XPMax, and YPMax in the view. The objects detected are passed to the main viewer, which is then updated. More...

AIS_StatusOfPick	Select (const TColgp_Array1OfPnt2d &thePolyline, const Handle< V3d_View > &theView, const Standard_Boolean theToUpdateViewer)
	polyline selection; clears the previous picked list More...

AIS_StatusOfPick	Select (const Standard_Boolean theToUpdateViewer)
	Stores and hilights the previous detected; Unhilights the previous picked. More...

AIS_StatusOfPick	ShiftSelect (const Standard_Boolean theToUpdateViewer)
	Adds the last detected to the list of previous picked. If the last detected was already declared as picked, removes it from the Picked List. More...

AIS_StatusOfPick	ShiftSelect (const TColgp_Array1OfPnt2d &thePolyline, const Handle< V3d_View > &theView, const Standard_Boolean theToUpdateViewer)
	Adds the last detected to the list of previous picked. If the last detected was already declared as picked, removes it from the Picked List. More...

AIS_StatusOfPick	ShiftSelect (const Standard_Integer theXPMin, const Standard_Integer theYPMin, const Standard_Integer theXPMax, const Standard_Integer theYPMax, const Handle< V3d_View > &theView, const Standard_Boolean theToUpdateViewer)
	Rectangle of selection; adds new detected entities into the picked list, removes the detected entities that were already stored. More...

Bnd_Box	BoundingBoxOfSelection () const
	Returns bounding box of selected objects. More...

void	FitSelected (const Handle< V3d_View > &theView, const Standard_Real theMargin, const Standard_Boolean theToUpdate)
	Fits the view correspondingly to the bounds of selected objects. Infinite objects are ignored if infinite state of AIS_InteractiveObject is set to true. More...

void	FitSelected (const Handle< V3d_View > &theView)
	Fits the view correspondingly to the bounds of selected objects. Infinite objects are ignored if infinite state of AIS_InteractiveObject is set to true. More...

Standard_Boolean	ToHilightSelected () const
	Return value specified whether selected object must be hilighted when mouse cursor is moved above it. More...

void	SetToHilightSelected (const Standard_Boolean toHilight)
	Specify whether selected object must be hilighted when mouse cursor is moved above it (in MoveTo method). By default this value is false and selected object is not hilighted in this case. More...

Standard_Boolean	AutomaticHilight () const
	Returns true if the automatic highlight mode is active; TRUE by default. More...

void	SetAutomaticHilight (Standard_Boolean theStatus)
	Sets the highlighting status of detected and selected entities. This function allows you to disconnect the automatic mode. More...

void	SetSelected (const Handle< SelectMgr_EntityOwner > &theOwners, const Standard_Boolean theToUpdateViewer)
	Unhighlights previously selected owners and marks them as not selected. Marks owner given as selected and highlights it. Performs selection filters check. More...

void	SetSelected (const Handle< AIS_InteractiveObject > &theObject, const Standard_Boolean theToUpdateViewer)
	Puts the interactive object aniObj in the list of selected objects. Performs selection filters check. More...

void	AddOrRemoveSelected (const Handle< AIS_InteractiveObject > &theObject, const Standard_Boolean theToUpdateViewer)
	Allows to highlight or unhighlight the owner given depending on its selection status. More...

Standard_Boolean	SetSelectedState (const Handle< SelectMgr_EntityOwner > &theOwner, const Standard_Boolean theIsSelected)
	Updates Selected state of specified owner without calling HilightSelected(). Has no effect if Selected state is not changed, and redirects to AddOrRemoveSelected() otherwise. More...

void	HilightSelected (const Standard_Boolean theToUpdateViewer)
	Highlights selected objects. More...

void	UnhilightSelected (const Standard_Boolean theToUpdateViewer)
	Removes highlighting from selected objects. More...

void	UpdateSelected (Standard_Boolean theToUpdateViewer)
	Updates the list of selected objects: i.e. highlights the newly selected ones and unhighlights previously selected objects. More...

void	ClearSelected (const Standard_Boolean theToUpdateViewer)
	Empties previous selected objects in order to get the selected objects detected by the selector using UpdateSelected. More...

void	AddOrRemoveSelected (const Handle< SelectMgr_EntityOwner > &theOwner, const Standard_Boolean theToUpdateViewer)
	Allows to highlight or unhighlight the owner given depending on its selection status. More...

Standard_Boolean	IsSelected (const Handle< SelectMgr_EntityOwner > &theOwner) const
	Returns true is the owner given is selected. More...

Standard_Boolean	IsSelected (const Handle< AIS_InteractiveObject > &theObj) const
	Returns true is the object given is selected. More...

Handle< AIS_InteractiveObject >	FirstSelectedObject () const
	Returns the first selected object in the list of current selected. More...

Standard_Integer	NbSelected ()
	Count a number of selected entities using InitSelected()+MoreSelected()+NextSelected() iterator. More...

void	InitSelected ()
	Initializes a scan of the selected objects. More...

Standard_Boolean	MoreSelected () const
	Returns true if there is another object found by the scan of the list of selected objects. More...

void	NextSelected ()
	Continues the scan to the next object in the list of selected objects. More...

Handle< SelectMgr_EntityOwner >	SelectedOwner () const
	Returns the owner of the selected entity. More...

Handle< AIS_InteractiveObject >	SelectedInteractive () const
	Return Handle(AIS_InteractiveObject)::DownCast (SelectedOwner()->Selectable()). More...

Standard_Boolean	HasSelectedShape () const
	Returns TRUE if the interactive context has a shape selected. More...

TopoDS_Shape	SelectedShape () const
	Returns the selected shape. Basically it is just a shape returned stored by StdSelect_BRepOwner with graphic transformation being applied: More...

Standard_Boolean	HasApplicative () const
	Returns SelectedInteractive()->HasOwner(). More...

Handle< Standard_Transient >	Applicative () const
	Returns SelectedInteractive()->GetOwner(). More...

immediate mode rendering
Standard_Boolean	BeginImmediateDraw ()
	initializes the list of presentations to be displayed returns False if no local context is opened. More...

Standard_Boolean	ImmediateAdd (const Handle< AIS_InteractiveObject > &theObj, const Standard_Integer theMode=0)
	returns True if <anIObj> has been stored in the list. More...

Standard_Boolean	EndImmediateDraw (const Handle< V3d_View > &theView)
	returns True if the immediate display has been done. More...

Standard_Boolean	EndImmediateDraw ()
	Uses the First Active View of Main Viewer! returns True if the immediate display has been done. More...

Standard_Boolean	IsImmediateModeOn () const
	initializes the list of presentations to be displayed returns False if no local context is opened. More...

void	RedrawImmediate (const Handle< V3d_Viewer > &theViewer)
	Redraws immediate structures in all views of the viewer given taking into account its visibility. More...

management of active Selection Modes
void	SetSelectionModeActive (const Handle< AIS_InteractiveObject > &theObj, const Standard_Integer theMode, const Standard_Boolean theToActivate, const AIS_SelectionModesConcurrency theConcurrency=AIS_SelectionModesConcurrency_Multiple, const Standard_Boolean theIsForce=Standard_False)
	Activates or deactivates the selection mode for specified object. Has no effect if selection mode was already active/deactivated. More...

void	Activate (const Handle< AIS_InteractiveObject > &theObj, const Standard_Integer theMode=0, const Standard_Boolean theIsForce=Standard_False)
	Activates the selection mode aMode whose index is given, for the given interactive entity anIobj. More...

void	Activate (const Standard_Integer theMode, const Standard_Boolean theIsForce=Standard_False)
	Activates the given selection mode for the all displayed objects. More...

void	Deactivate (const Handle< AIS_InteractiveObject > &theObj)
	Deactivates all the activated selection modes of an object. More...

void	Deactivate (const Handle< AIS_InteractiveObject > &theObj, const Standard_Integer theMode)
	Deactivates all the activated selection modes of the interactive object anIobj with a given selection mode aMode. More...

void	Deactivate (const Standard_Integer theMode)
	Deactivates the given selection mode for all displayed objects. More...

void	Deactivate ()
	Deactivates all the activated selection mode at all displayed objects. More...

void	ActivatedModes (const Handle< AIS_InteractiveObject > &anIobj, TColStd_ListOfInteger &theList) const
	Returns the list of activated selection modes. More...

void	EntityOwners (Handle< SelectMgr_IndexedMapOfOwner > &theOwners, const Handle< AIS_InteractiveObject > &theIObj, const Standard_Integer theMode=-1) const
	Returns a collection containing all entity owners created for the interactive object in specified selection mode (in all active modes if the Mode == -1) More...

Selection Filters management
SelectMgr_FilterType	FilterType () const

void	SetFilterType (const SelectMgr_FilterType theFilterType)
	Sets the context selection filter type. SelectMgr_TypeFilter_OR selection filter is used by default. More...

const SelectMgr_ListOfFilter &	Filters () const
	Returns the list of filters active in a local context. More...

void	AddFilter (const Handle< SelectMgr_Filter > &theFilter)
	Allows you to add the filter. More...

void	RemoveFilter (const Handle< SelectMgr_Filter > &theFilter)
	Removes a filter from context. More...

void	RemoveFilters ()
	Remove all filters from context. More...

SelectMgr_PickingStrategy	PickingStrategy () const
	Return picking strategy; SelectMgr_PickingStrategy_FirstAcceptable by default. More...

void	SetPickingStrategy (const SelectMgr_PickingStrategy theStrategy)
	Setup picking strategy - which entities detected by picking line will be accepted, considering Selection Filters. By default (SelectMgr_PickingStrategy_FirstAcceptable), Selection Filters reduce the list of entities so that the context accepts topmost in remaining. More...

common properties
const Handle< Prs3d_Drawer > &	DefaultDrawer () const
	Returns the default attribute manager. This contains all the color and line attributes which can be used by interactive objects which do not have their own attributes. More...

const Handle< V3d_Viewer > &	CurrentViewer () const
	Returns the current viewer. More...

const Handle< SelectMgr_SelectionManager > &	SelectionManager () const
	Returns the default attribute manager. This contains all the color and line attributes which can be used by interactive objects which do not have their own attributes. More...

const Handle< PrsMgr_PresentationManager3d > &	MainPrsMgr () const
	Returns the default attribute manager. This contains all the color and line attributes which can be used by interactive objects which do not have their own attributes. More...

const Handle< StdSelect_ViewerSelector3d > &	MainSelector () const
	Returns the default attribute manager. This contains all the color and line attributes which can be used by interactive objects which do not have their own attributes. More...

void	UpdateCurrentViewer ()
	Updates the current viewer. More...

void	DisplayedObjects (AIS_ListOfInteractive &aListOfIO) const
	Returns the list of displayed objects of a particular Type WhichKind and Signature WhichSignature. By Default, WhichSignature equals -1. This means that there is a check on type only. More...

void	DisplayedObjects (const AIS_KindOfInteractive theWhichKind, const Standard_Integer theWhichSignature, AIS_ListOfInteractive &theListOfIO) const
	gives the list of displayed objects of a particular Type and signature. by Default, <WhichSignature> = -1 means control only on <WhichKind>. More...

void	ErasedObjects (AIS_ListOfInteractive &theListOfIO) const
	Returns the list theListOfIO of erased objects (hidden objects) particular Type WhichKind and Signature WhichSignature. By Default, WhichSignature equals 1. This means that there is a check on type only. More...

void	ErasedObjects (const AIS_KindOfInteractive theWhichKind, const Standard_Integer theWhichSignature, AIS_ListOfInteractive &theListOfIO) const
	gives the list of erased objects (hidden objects) Type and signature by Default, <WhichSignature> = -1 means control only on <WhichKind>. More...

void	ObjectsByDisplayStatus (const AIS_DisplayStatus theStatus, AIS_ListOfInteractive &theListOfIO) const
	Returns the list theListOfIO of objects with indicated display status particular Type WhichKind and Signature WhichSignature. By Default, WhichSignature equals 1. This means that there is a check on type only. More...

void	ObjectsByDisplayStatus (const AIS_KindOfInteractive WhichKind, const Standard_Integer WhichSignature, const AIS_DisplayStatus theStatus, AIS_ListOfInteractive &theListOfIO) const
	gives the list of objects with indicated display status Type and signature by Default, <WhichSignature> = -1 means control only on <WhichKind>. More...

void	ObjectsInside (AIS_ListOfInteractive &aListOfIO, const AIS_KindOfInteractive WhichKind=AIS_KOI_None, const Standard_Integer WhichSignature=-1) const
	fills <aListOfIO> with objects of a particular Type and Signature with no consideration of display status. by Default, <WhichSignature> = -1 means control only on <WhichKind>. if <WhichKind> = AIS_KOI_None and <WhichSignature> = -1, all the objects are put into the list. More...

void	RebuildSelectionStructs ()
	Rebuilds 1st level of BVH selection forcibly. More...

void	Disconnect (const Handle< AIS_InteractiveObject > &theAssembly, const Handle< AIS_InteractiveObject > &theObjToDisconnect=NULL)
	Disconnects theObjToDisconnect from theAssembly and removes dependent selection structures. More...

void	ObjectsForView (AIS_ListOfInteractive &theListOfIO, const Handle< V3d_View > &theView, const Standard_Boolean theIsVisibleInView, const AIS_DisplayStatus theStatus=AIS_DS_None) const
	Query objects visible or hidden in specified view due to affinity mask. More...

Standard_Integer	PurgeDisplay ()
	Clears all the structures which don't belong to objects displayed at neutral point only effective when no Local Context is opened... returns the number of removed structures from the viewers. More...

virtual gp_Pnt	GravityPoint (const Handle< V3d_View > &theView) const
	Return rotation gravity point. More...

debug visualization
void	DisplayActiveSensitive (const Handle< V3d_View > &aView)
	Visualization of sensitives - for debugging purposes! More...

void	ClearActiveSensitive (const Handle< V3d_View > &aView)
	Clear visualization of sensitives. More...

void	DisplayActiveSensitive (const Handle< AIS_InteractiveObject > &anObject, const Handle< V3d_View > &aView)
	Visualization of sensitives - for debugging purposes! More...

common object display attributes
void	SetLocalAttributes (const Handle< AIS_InteractiveObject > &theIObj, const Handle< Prs3d_Drawer > &theDrawer, const Standard_Boolean theToUpdateViewer)
	Sets the graphic attributes of the interactive object, such as visualization mode, color, and material. More...

void	UnsetLocalAttributes (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Boolean theToUpdateViewer)
	Removes the settings for local attributes of the Object and returns to defaults. More...

void	SetCurrentFacingModel (const Handle< AIS_InteractiveObject > &aniobj, const Aspect_TypeOfFacingModel aModel=Aspect_TOFM_BOTH_SIDE)
	change the current facing model apply on polygons for SetColor(), SetTransparency(), SetMaterial() methods default facing model is Aspect_TOFM_TWO_SIDE. This mean that attributes is applying both on the front and back face. More...

Standard_Boolean	HasColor (const Handle< AIS_InteractiveObject > &aniobj) const
	Returns true if a view of the Interactive Object has color. More...

void	Color (const Handle< AIS_InteractiveObject > &aniobj, Quantity_Color &acolor) const
	Returns the color of the Object in the interactive context. More...

void	SetColor (const Handle< AIS_InteractiveObject > &theIObj, const Quantity_Color &theColor, const Standard_Boolean theToUpdateViewer)
	Sets the color of the selected entity. More...

void	UnsetColor (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Boolean theToUpdateViewer)
	Removes the color selection for the selected entity. More...

virtual Standard_Real	Width (const Handle< AIS_InteractiveObject > &aniobj) const
	Returns the width of the Interactive Object in the interactive context. More...

virtual void	SetWidth (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Real theValue, const Standard_Boolean theToUpdateViewer)
	Sets the width of the Object. More...

virtual void	UnsetWidth (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Boolean theToUpdateViewer)
	Removes the width setting of the Object. More...

void	SetMaterial (const Handle< AIS_InteractiveObject > &theIObj, const Graphic3d_MaterialAspect &theMaterial, const Standard_Boolean theToUpdateViewer)
	Provides the type of material setting for the view of the Object. More...

void	UnsetMaterial (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Boolean theToUpdateViewer)
	Removes the type of material setting for viewing the Object. More...

void	SetTransparency (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Real theValue, const Standard_Boolean theToUpdateViewer)
	Provides the transparency settings for viewing the Object. The transparency value aValue may be between 0.0, opaque, and 1.0, fully transparent. More...

void	UnsetTransparency (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Boolean theToUpdateViewer)
	Removes the transparency settings for viewing the Object. More...

void	SetPolygonOffsets (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Integer theMode, const Standard_ShortReal theFactor, const Standard_ShortReal theUnits, const Standard_Boolean theToUpdateViewer)
	Sets up polygon offsets for the given AIS_InteractiveObject. It simply calls AIS_InteractiveObject::SetPolygonOffsets(). More...

Standard_Boolean	HasPolygonOffsets (const Handle< AIS_InteractiveObject > &anObj) const
	Simply calls AIS_InteractiveObject::HasPolygonOffsets(). More...

void	PolygonOffsets (const Handle< AIS_InteractiveObject > &anObj, Standard_Integer &aMode, Standard_ShortReal &aFactor, Standard_ShortReal &aUnits) const
	Retrieves current polygon offsets settings for Object. More...

trihedron display attributes
void	SetTrihedronSize (const Standard_Real theSize, const Standard_Boolean theToUpdateViewer)
	Sets the size aSize of the trihedron. Is used to change the default value 100 mm for display of trihedra. Use of this function in one of your own interactive objects requires a call to the Compute function of the new class. This will recalculate the presentation for every trihedron displayed. More...

Standard_Real	TrihedronSize () const
	returns the current value of trihedron size. More...

plane display attributes
void	SetPlaneSize (const Standard_Real theSizeX, const Standard_Real theSizeY, const Standard_Boolean theToUpdateViewer)
	Sets the plane size defined by the length in the X direction XSize and that in the Y direction YSize. More...

void	SetPlaneSize (const Standard_Real theSize, const Standard_Boolean theToUpdateViewer)
	Sets the plane size aSize. More...

Standard_Boolean	PlaneSize (Standard_Real &XSize, Standard_Real &YSize) const
	Returns true if the length in the X direction XSize is the same as that in the Y direction YSize. More...

tessellation deviation properties for automatic triangulation
void	SetDeviationCoefficient (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Real theCoefficient, const Standard_Boolean theToUpdateViewer)
	Sets the deviation coefficient theCoefficient. Drawings of curves or patches are made with respect to a maximal chordal deviation. A Deviation coefficient is used in the shading display mode. The shape is seen decomposed into triangles. These are used to calculate reflection of light from the surface of the object. The triangles are formed from chords of the curves in the shape. The deviation coefficient theCoefficient gives the highest value of the angle with which a chord can deviate from a tangent to a curve. If this limit is reached, a new triangle is begun. This deviation is absolute and is set through the method: SetMaximalChordialDeviation. The default value is 0.001. In drawing shapes, however, you are allowed to ask for a relative deviation. This deviation will be: SizeOfObject * DeviationCoefficient. More...

void	SetDeviationAngle (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Real theAngle, const Standard_Boolean theToUpdateViewer)
	Sets the deviation coefficient theCoefficient. Drawings of curves or patches are made with respect to a maximal chordal deviation. A Deviation coefficient is used in the shading display mode. The shape is seen decomposed into triangles. These are used to calculate reflection of light from the surface of the object. The triangles are formed from chords of the curves in the shape. The deviation coefficient theCoefficient gives the highest value of the angle with which a chord can deviate from a tangent to a curve. If this limit is reached, a new triangle is begun. This deviation is absolute and is set through the method: SetMaximalChordialDeviation. The default value is 0.001. In drawing shapes, however, you are allowed to ask for a relative deviation. This deviation will be: SizeOfObject * DeviationCoefficient. More...

void	SetAngleAndDeviation (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Real theAngle, const Standard_Boolean theToUpdateViewer)
	Calls the AIS_Shape SetAngleAndDeviation to set both Angle and Deviation coefficients. More...

void	SetDeviationCoefficient (const Standard_Real theCoefficient)
	Sets the deviation coefficient theCoefficient. Drawings of curves or patches are made with respect to a maximal chordal deviation. A Deviation coefficient is used in the shading display mode. The shape is seen decomposed into triangles. These are used to calculate reflection of light from the surface of the object. The triangles are formed from chords of the curves in the shape. The deviation coefficient theCoefficient gives the highest value of the angle with which a chord can deviate from a tangent to a curve. If this limit is reached, a new triangle is begun. This deviation is absolute and is set through the method: SetMaximalChordialDeviation. The default value is 0.001. In drawing shapes, however, you are allowed to ask for a relative deviation. This deviation will be: SizeOfObject * DeviationCoefficient. More...

Standard_Real	DeviationCoefficient () const
	Returns the deviation coefficient. Drawings of curves or patches are made with respect to a maximal chordal deviation. A Deviation coefficient is used in the shading display mode. The shape is seen decomposed into triangles. These are used to calculate reflection of light from the surface of the object. The triangles are formed from chords of the curves in the shape. The deviation coefficient gives the highest value of the angle with which a chord can deviate from a tangent to a curve. If this limit is reached, a new triangle is begun. This deviation is absolute and is set through Prs3d_Drawer::SetMaximalChordialDeviation. The default value is 0.001. In drawing shapes, however, you are allowed to ask for a relative deviation. This deviation will be: SizeOfObject * DeviationCoefficient. More...

void	SetDeviationAngle (const Standard_Real anAngle)
	default 20 degrees More...

Standard_Real	DeviationAngle () const
	Sets the deviation coefficient theCoefficient. Drawings of curves or patches are made with respect to a maximal chordal deviation. A Deviation coefficient is used in the shading display mode. The shape is seen decomposed into triangles. These are used to calculate reflection of light from the surface of the object. The triangles are formed from chords of the curves in the shape. The deviation coefficient theCoefficient gives the highest value of the angle with which a chord can deviate from a tangent to a curve. If this limit is reached, a new triangle is begun. This deviation is absolute and is set through the method: SetMaximalChordialDeviation. The default value is 0.001. In drawing shapes, however, you are allowed to ask for a relative deviation. This deviation will be: SizeOfObject * DeviationCoefficient. More...

HLR (Hidden Line Removal) display attributes
Handle< Prs3d_LineAspect >	HiddenLineAspect () const
	Initializes hidden line aspect in the default drawing tool, or Drawer. The default values are: Color: Quantity_NOC_YELLOW Type of line: Aspect_TOL_DASH Width: 1. More...

void	SetHiddenLineAspect (const Handle< Prs3d_LineAspect > &anAspect) const
	Sets the hidden line aspect anAspect. Aspect defines display attributes for hidden lines in HLR projections. More...

Standard_Boolean	DrawHiddenLine () const
	returns Standard_True if the hidden lines are to be drawn. By default the hidden lines are not drawn. More...

void	EnableDrawHiddenLine () const
	Initializes hidden line aspect in the default drawing tool, or Drawer. The default values are: Color: Quantity_NOC_YELLOW Type of line: Aspect_TOL_DASH Width: 1. More...

void	DisableDrawHiddenLine () const
	Initializes hidden line aspect in the default drawing tool, or Drawer. The default values are: Color: Quantity_NOC_YELLOW Type of line: Aspect_TOL_DASH Width: 1. More...

iso-line display attributes
void	SetIsoNumber (const Standard_Integer NbIsos, const AIS_TypeOfIso WhichIsos=AIS_TOI_Both)
	Sets the number of U and V isoparameters displayed. More...

Standard_Integer	IsoNumber (const AIS_TypeOfIso WhichIsos=AIS_TOI_Both)
	Returns the number of U and V isoparameters displayed. More...

void	IsoOnPlane (const Standard_Boolean SwitchOn)
	Returns True if drawing isoparameters on planes is enabled. More...

Standard_Boolean	IsoOnPlane () const
	Returns True if drawing isoparameters on planes is enabled. if <forUIsos> = False,. More...

void	IsoOnTriangulation (const Standard_Boolean theIsEnabled, const Handle< AIS_InteractiveObject > &theObject)
	Enables or disables on-triangulation build for isolines for a particular object. In case if on-triangulation builder is disabled, default on-plane builder will compute isolines for the object given. More...

void	IsoOnTriangulation (const Standard_Boolean theToSwitchOn)
	Enables or disables on-triangulation build for isolines for default drawer. In case if on-triangulation builder is disabled, default on-plane builder will compute isolines for the object given. More...

Standard_Boolean	IsoOnTriangulation () const
	Returns true if drawing isolines on triangulation algorithm is enabled. More...

obsolete methods
void	SetCurrentObject (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Boolean theToUpdateViewer)
	Updates the view of the current object in open context. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects. More...

void	AddOrRemoveCurrentObject (const Handle< AIS_InteractiveObject > &theObj, const Standard_Boolean theIsToUpdateViewer)
	Allows to add or remove the object given to the list of current and highlight/unhighlight it correspondingly. Is valid for global context only; for local context use method AddOrRemoveSelected. Since this method makes sence only for neutral point selection of a whole object, if 0 selection of the object is empty this method simply does nothing. More...

void	UpdateCurrent ()
	Updates the list of current objects, i.e. hilights new current objects, removes hilighting from former current objects. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects. More...

Standard_Boolean	IsCurrent (const Handle< AIS_InteractiveObject > &theObject) const
	Returns true if there is a non-null interactive object in Neutral Point. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects. More...

void	InitCurrent ()
	Initializes a scan of the current selected objects in Neutral Point. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects. More...

Standard_Boolean	MoreCurrent () const
	Returns true if there is another object found by the scan of the list of current objects. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects. More...

void	NextCurrent ()
	Continues the scan to the next object in the list of current objects. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects. More...

Handle< AIS_InteractiveObject >	Current () const
	Returns the current interactive object. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects. More...

Standard_Integer	NbCurrents ()

void	HilightCurrents (const Standard_Boolean theToUpdateViewer)
	Highlights current objects. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects. More...

void	UnhilightCurrents (const Standard_Boolean theToUpdateViewer)
	Removes highlighting from current objects. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects. More...

void	ClearCurrents (const Standard_Boolean theToUpdateViewer)
	Empties previous current objects in order to get the current objects detected by the selector using UpdateCurrent. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects. More...

const TopoDS_Shape &	DetectedCurrentShape () const

Handle< AIS_InteractiveObject >	DetectedCurrentObject () const

sub-intensity management (deprecated)
const Quantity_Color &	SubIntensityColor () const
	Sub-intensity allows temporary highlighting of particular objects with specified color in a manner of selection highlight, but without actual selection (e.g., global status and owner's selection state will not be updated). The method returns the color of such highlighting. By default, it is Quantity_NOC_GRAY40. More...

void	SetSubIntensityColor (const Quantity_Color &theColor)
	Sub-intensity allows temporary highlighting of particular objects with specified color in a manner of selection highlight, but without actual selection (e.g., global status and owner's selection state will not be updated). The method sets up the color for such highlighting. By default, this is Quantity_NOC_GRAY40. More...

void	SubIntensityOn (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Boolean theToUpdateViewer)
	Highlights, and removes highlights from, the displayed object which is displayed at Neutral Point with subintensity color. Available only for active local context. There is no effect if there is no local context. If a local context is open, the presentation of the Interactive Object activates the selection mode. More...

void	SubIntensityOff (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Boolean theToUpdateViewer)
	Removes the subintensity option for the entity. If a local context is open, the presentation of the Interactive Object activates the selection mode. More...

const Handle< AIS_Selection > &	Selection () const
	Returns selection instance. More...

void	SetSelection (const Handle< AIS_Selection > &theSelection)
	Sets selection instance to manipulate a container of selected owners. More...

virtual void	DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const
	Dumps the content of me into the stream. More...

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor. More...

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing. More...

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter. More...

virtual	~Standard_Transient ()
	Destructor must be virtual. More...

virtual void	Delete () const
	Memory deallocator for transient classes. More...

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object. More...

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type. More...

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName. More...

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism. More...

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero. More...

Standard_Integer	GetRefCount () const
	Get the reference counter of this object. More...

void	IncrementRefCounter () const
	Increments the reference counter of this object. More...

Standard_Integer	DecrementRefCounter () const
	Decrements the reference counter of this object; returns the decremented value. More...

Protected Member Functions
internal methods
void	GetDefModes (const Handle< AIS_InteractiveObject > &anIobj, Standard_Integer &Dmode, Standard_Integer &HiMod, Standard_Integer &SelMode) const
	Helper function to unhighlight all entity owners currently highlighted with seleciton color. More...

void	EraseGlobal (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Boolean theToUpdateViewer)
	Helper function to unhighlight all entity owners currently highlighted with seleciton color. More...

void	ClearGlobal (const Handle< AIS_InteractiveObject > &theIObj, const Standard_Boolean theToUpdateViewer)
	Helper function to unhighlight all entity owners currently highlighted with seleciton color. More...

void	ClearGlobalPrs (const Handle< AIS_InteractiveObject > &theObj, const Standard_Integer theMode, const Standard_Boolean theToUpdateViewer)
	Helper function to unhighlight all entity owners currently highlighted with seleciton color. More...

void	InitAttributes ()
	Helper function to unhighlight all entity owners currently highlighted with seleciton color. More...

Standard_Integer	PurgeViewer (const Handle< V3d_Viewer > &Vwr)
	Helper function to unhighlight all entity owners currently highlighted with seleciton color. More...

void	unselectOwners (const Handle< AIS_InteractiveObject > &theObject)
	Helper function to unhighlight all entity owners currently highlighted with seleciton color. More...

void	highlightWithColor (const Handle< SelectMgr_EntityOwner > &theOwner, const Handle< V3d_Viewer > &theViewer=NULL)
	Helper function that highlights the owner given with <theStyle> without performing AutoHighlight checks, e.g. is used for dynamic highlight. More...

void	highlightSelected (const Handle< SelectMgr_EntityOwner > &theOwner)
	Helper function that highlights the owner given with <theStyle> with check for AutoHighlight, e.g. is used for selection. More...

void	highlightOwners (const AIS_NListOfEntityOwner &theOwners)
	Helper function that highlights the owners with check for AutoHighlight, e.g. is used for selection. More...

void	highlightGlobal (const Handle< AIS_InteractiveObject > &theObj, const Handle< Prs3d_Drawer > &theStyle, const Standard_Integer theDispMode)
	Helper function that highlights global owner of the object given with <theStyle> with check for AutoHighlight, e.g. is used for selection. If global owner is null, it simply highlights the whole object. More...

void	unhighlightSelected (const Standard_Boolean theIsToHilightSubIntensity=Standard_False)
	Helper function that unhighlights all owners that are stored in current AIS_Selection. The function updates global status and selection state of owner and interactive object. If the parameter <theIsToHilightSubIntensity> is set to true, interactive objects with sub-intensity switched on in AIS_GlobalStatus will be highlighted with context's sub-intensity color. More...

void	unhighlightOwners (const AIS_NListOfEntityOwner &theOwners, const Standard_Boolean theIsToHilightSubIntensity=Standard_False)
	Helper function that unhighlights the owners with check for AutoHighlight, e.g. is used for selection. More...

void	unhighlightGlobal (const Handle< AIS_InteractiveObject > &theObj)
	Helper function that unhighlights global selection owner of given interactive. The function does not perform any updates of global or owner status. More...

void	turnOnSubintensity (const Handle< AIS_InteractiveObject > &theObject=NULL, const Standard_Integer theDispMode=-1, const Standard_Boolean theIsDisplayedOnly=Standard_True) const
	Helper function that turns on sub-intensity in global status and highlights given objects with sub-intensity color. More...

void	highlightWithSubintensity (const Handle< AIS_InteractiveObject > &theObject, const Standard_Integer theMode) const
	Helper function that highlights the object with sub-intensity color without any checks. More...

void	highlightWithSubintensity (const Handle< SelectMgr_EntityOwner > &theOwner, const Standard_Integer theMode) const
	Helper function that highlights the owner with sub-intensity color without any checks. More...

const Handle< Prs3d_Drawer > &	getHiStyle (const Handle< AIS_InteractiveObject > &theObj, const Handle< SelectMgr_EntityOwner > &theOwner) const
	Helper function that returns correct dynamic highlight style for the object: if custom style is defined via object's highlight drawer, it will be used. Otherwise, dynamic highlight style of interactive context will be returned. More...

Standard_Boolean	isSlowHiStyle (const Handle< SelectMgr_EntityOwner > &theOwner, const Handle< V3d_Viewer > &theViewer) const
	Return TRUE if highlight style of owner requires full viewer redraw. More...

const Handle< Prs3d_Drawer > &	getSelStyle (const Handle< AIS_InteractiveObject > &theObj, const Handle< SelectMgr_EntityOwner > &theOwner) const
	Helper function that returns correct selection style for the object: if custom style is defined via object's highlight drawer, it will be used. Otherwise, selection style of interactive context will be returned. More...

void	setContextToObject (const Handle< AIS_InteractiveObject > &theObj)
	Assign the context to the object or throw exception if object was already assigned to another context. More...

Standard_Integer	getHilightMode (const Handle< AIS_InteractiveObject > &theObj, const Handle< Prs3d_Drawer > &theStyle, const Standard_Integer theDispMode) const
	Return display mode for highlighting. More...

void	clearDynamicHighlight () const
	Removes dynamic highlight draw. More...

void	setObjectStatus (const Handle< AIS_InteractiveObject > &theIObj, const AIS_DisplayStatus theStatus, const Standard_Integer theDispyMode, const Standard_Integer theSelectionMode)
	Bind/Unbind status to object and its children. More...

Protected Attributes
internal fields
AIS_DataMapOfIOStatus	myObjects
	context filter (the content active filters can be applied with AND or OR operation) More...

Handle< SelectMgr_SelectionManager >	mgrSelector
	context filter (the content active filters can be applied with AND or OR operation) More...

Handle< PrsMgr_PresentationManager3d >	myMainPM
	context filter (the content active filters can be applied with AND or OR operation) More...

Handle< V3d_Viewer >	myMainVwr
	context filter (the content active filters can be applied with AND or OR operation) More...

Handle< StdSelect_ViewerSelector3d >	myMainSel
	context filter (the content active filters can be applied with AND or OR operation) More...

V3d_View *	myLastActiveView
	context filter (the content active filters can be applied with AND or OR operation) More...

Handle< SelectMgr_EntityOwner >	myLastPicked
	context filter (the content active filters can be applied with AND or OR operation) More...

Standard_Boolean	myToHilightSelected
	context filter (the content active filters can be applied with AND or OR operation) More...

Handle< AIS_Selection >	mySelection
	context filter (the content active filters can be applied with AND or OR operation) More...

Handle< SelectMgr_AndOrFilter >	myFilters
	context filter (the content active filters can be applied with AND or OR operation) More...

Handle< Prs3d_Drawer >	myDefaultDrawer
	context filter (the content active filters can be applied with AND or OR operation) More...

Handle< Prs3d_Drawer >	myStyles [Prs3d_TypeOfHighlight_NB]
	context filter (the content active filters can be applied with AND or OR operation) More...

TColStd_SequenceOfInteger	myDetectedSeq
	context filter (the content active filters can be applied with AND or OR operation) More...

Standard_Integer	myCurDetected
	context filter (the content active filters can be applied with AND or OR operation) More...

Standard_Integer	myCurHighlighted
	context filter (the content active filters can be applied with AND or OR operation) More...

SelectMgr_PickingStrategy	myPickingStrategy
	picking strategy to be applied within MoveTo() More...

Standard_Boolean	myAutoHilight
	context filter (the content active filters can be applied with AND or OR operation) More...

Standard_Boolean	myIsAutoActivateSelMode
	context filter (the content active filters can be applied with AND or OR operation) More...

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object. More...

Static Public Member Functions inherited from Standard_Transient
static const char *	get_type_name ()
	Returns a type descriptor about this object. More...

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class. More...

Detailed Description

The Interactive Context allows you to manage graphic behavior and selection of Interactive Objects in one or more viewers. Class methods make this highly transparent. It is essential to remember that an Interactive Object which is already known by the Interactive Context must be modified using Context methods. You can only directly call the methods available for an Interactive Object if it has not been loaded into an Interactive Context.

Each selectable object must specify the selection mode that is responsible for selection of object as a whole (global selection mode). Interactive context itself supports decomposed object selection with selection filters support. By default, global selection mode is equal to 0, but it might be redefined if needed.

Constructor & Destructor Documentation

◆ AIS_InteractiveContext()

AIS_InteractiveContext::AIS_InteractiveContext ( const Handle< V3d_Viewer > & MainViewer )

Constructs the interactive context object defined by the principal viewer MainViewer.

◆ ~AIS_InteractiveContext()

virtual AIS_InteractiveContext::~AIS_InteractiveContext ( )

virtual

Destructor.

Member Function Documentation

◆ Activate() [1/2]

void AIS_InteractiveContext::Activate	(	const Handle< AIS_InteractiveObject > &	theObj,
		const Standard_Integer	theMode = `0`,
		const Standard_Boolean	theIsForce = `Standard_False`
	)

inline

Activates the selection mode aMode whose index is given, for the given interactive entity anIobj.

◆ Activate() [2/2]

void AIS_InteractiveContext::Activate	(	const Standard_Integer	theMode,
		const Standard_Boolean	theIsForce = `Standard_False`
	)

Activates the given selection mode for the all displayed objects.

◆ ActivatedModes()

void AIS_InteractiveContext::ActivatedModes	(	const Handle< AIS_InteractiveObject > &	anIobj,
		TColStd_ListOfInteger &	theList
	)		const

Returns the list of activated selection modes.

◆ AddFilter()

void AIS_InteractiveContext::AddFilter ( const Handle< SelectMgr_Filter > & theFilter )

Allows you to add the filter.

◆ AddOrRemoveCurrentObject()

void AIS_InteractiveContext::AddOrRemoveCurrentObject	(	const Handle< AIS_InteractiveObject > &	theObj,
		const Standard_Boolean	theIsToUpdateViewer
	)

inline

Allows to add or remove the object given to the list of current and highlight/unhighlight it correspondingly. Is valid for global context only; for local context use method AddOrRemoveSelected. Since this method makes sence only for neutral point selection of a whole object, if 0 selection of the object is empty this method simply does nothing.

Deprecated:: ("Local Context is deprecated - local selection should be used without Local Context")

◆ AddOrRemoveSelected() [1/2]

void AIS_InteractiveContext::AddOrRemoveSelected	(	const Handle< AIS_InteractiveObject > &	theObject,
		const Standard_Boolean	theToUpdateViewer
	)

Allows to highlight or unhighlight the owner given depending on its selection status.

◆ AddOrRemoveSelected() [2/2]

void AIS_InteractiveContext::AddOrRemoveSelected	(	const Handle< SelectMgr_EntityOwner > &	theOwner,
		const Standard_Boolean	theToUpdateViewer
	)

Allows to highlight or unhighlight the owner given depending on its selection status.

◆ AddSelect() [1/2]

AIS_StatusOfPick AIS_InteractiveContext::AddSelect ( const Handle< SelectMgr_EntityOwner > & theObject )

Adds object in the selection.

◆ AddSelect() [2/2]

AIS_StatusOfPick AIS_InteractiveContext::AddSelect ( const Handle< AIS_InteractiveObject > & theObject )

inline

Adds object in the selection.

◆ Applicative()

Handle< Standard_Transient > AIS_InteractiveContext::Applicative ( ) const

inline

Returns SelectedInteractive()->GetOwner().

See also: SelectedOwner().

◆ AutomaticHilight()

Standard_Boolean AIS_InteractiveContext::AutomaticHilight ( ) const

inline

Returns true if the automatic highlight mode is active; TRUE by default.

See also: MoveTo(), Select(), HilightWithColor(), Unhilight()

◆ BeginImmediateDraw()

Standard_Boolean AIS_InteractiveContext::BeginImmediateDraw ( )

initializes the list of presentations to be displayed returns False if no local context is opened.

◆ BoundingBoxOfSelection()

Bnd_Box AIS_InteractiveContext::BoundingBoxOfSelection ( ) const

Returns bounding box of selected objects.

◆ ClearActiveSensitive()

void AIS_InteractiveContext::ClearActiveSensitive ( const Handle< V3d_View > & aView )

Clear visualization of sensitives.

◆ ClearCurrents()

void AIS_InteractiveContext::ClearCurrents ( const Standard_Boolean theToUpdateViewer )

inline

Empties previous current objects in order to get the current objects detected by the selector using UpdateCurrent. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects.

Deprecated:: ("Local Context is deprecated - local selection should be used without Local Context")

◆ ClearDetected()

Standard_Boolean AIS_InteractiveContext::ClearDetected ( Standard_Boolean theToRedrawImmediate = Standard_False )

Clears the list of entities detected by MoveTo() and resets dynamic highlighting.

Parameters

theToRedrawImmediate if TRUE, the main Viewer will be redrawn on update

Returns: TRUE if viewer needs to be updated (e.g. there were actually dynamically highlighted entities)

◆ clearDynamicHighlight()

void AIS_InteractiveContext::clearDynamicHighlight ( ) const

inlineprotected

Removes dynamic highlight draw.

◆ ClearGlobal()

void AIS_InteractiveContext::ClearGlobal	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Boolean	theToUpdateViewer
	)

protected

Helper function to unhighlight all entity owners currently highlighted with seleciton color.

◆ ClearGlobalPrs()

void AIS_InteractiveContext::ClearGlobalPrs	(	const Handle< AIS_InteractiveObject > &	theObj,
		const Standard_Integer	theMode,
		const Standard_Boolean	theToUpdateViewer
	)

protected

Helper function to unhighlight all entity owners currently highlighted with seleciton color.

◆ ClearPrs()

void AIS_InteractiveContext::ClearPrs	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Integer	theMode,
		const Standard_Boolean	theToUpdateViewer
	)

inline

Empties the graphic presentation of the mode indexed by aMode. Warning! Removes theIObj. theIObj is still active if it was previously activated.

◆ ClearSelected()

void AIS_InteractiveContext::ClearSelected ( const Standard_Boolean theToUpdateViewer )

Empties previous selected objects in order to get the selected objects detected by the selector using UpdateSelected.

◆ Color()

void AIS_InteractiveContext::Color	(	const Handle< AIS_InteractiveObject > &	aniobj,
		Quantity_Color &	acolor
	)		const

Returns the color of the Object in the interactive context.

◆ Current()

Handle< AIS_InteractiveObject > AIS_InteractiveContext::Current ( ) const

inline

Returns the current interactive object. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects.

Deprecated:: ("Local Context is deprecated - local selection should be used without Local Context")

◆ CurrentViewer()

const Handle< V3d_Viewer >& AIS_InteractiveContext::CurrentViewer ( ) const

inline

Returns the current viewer.

◆ Deactivate() [1/4]

void AIS_InteractiveContext::Deactivate ( const Handle< AIS_InteractiveObject > & theObj )

inline

Deactivates all the activated selection modes of an object.

◆ Deactivate() [2/4]

void AIS_InteractiveContext::Deactivate	(	const Handle< AIS_InteractiveObject > &	theObj,
		const Standard_Integer	theMode
	)

inline

Deactivates all the activated selection modes of the interactive object anIobj with a given selection mode aMode.

◆ Deactivate() [3/4]

void AIS_InteractiveContext::Deactivate ( const Standard_Integer theMode )

Deactivates the given selection mode for all displayed objects.

◆ Deactivate() [4/4]

void AIS_InteractiveContext::Deactivate ( )

Deactivates all the activated selection mode at all displayed objects.

◆ DefaultDrawer()

const Handle< Prs3d_Drawer >& AIS_InteractiveContext::DefaultDrawer ( ) const

inline

Returns the default attribute manager. This contains all the color and line attributes which can be used by interactive objects which do not have their own attributes.

◆ DetectedCurrentObject()

Handle< AIS_InteractiveObject > AIS_InteractiveContext::DetectedCurrentObject ( ) const

Returns: current mouse-detected interactive object or null object, if there is no currently detected interactives

See also: DetectedCurrentOwner()/InitDetected()/MoreDetected()/NextDetected().

Deprecated:: ("Local Context is deprecated - ::DetectedCurrentOwner() should be called instead")

◆ DetectedCurrentOwner()

Handle< SelectMgr_EntityOwner > AIS_InteractiveContext::DetectedCurrentOwner ( ) const

Returns the owner from detected list pointed by current iterator position. WARNING! This method is irrelevant to DetectedOwner() which returns last picked Owner regardless of iterator position!

See also: InitDetected()/MoreDetected()/NextDetected().

◆ DetectedCurrentShape()

const TopoDS_Shape& AIS_InteractiveContext::DetectedCurrentShape ( ) const

Returns: current mouse-detected shape or empty (null) shape, if current interactive object is not a shape (AIS_Shape) or there is no current mouse-detected interactive object at all.

See also: DetectedCurrentOwner()/InitDetected()/MoreDetected()/NextDetected().

Deprecated:: ("Local Context is deprecated - ::DetectedCurrentOwner() should be called instead")

◆ DetectedInteractive()

Handle< AIS_InteractiveObject > AIS_InteractiveContext::DetectedInteractive ( ) const

inline

Returns the interactive objects last detected in context. In general this is just a wrapper for Handle(AIS_InteractiveObject)::DownCast(DetectedOwner()->Selectable()).

See also: DetectedOwner()

◆ DetectedOwner()

const Handle< SelectMgr_EntityOwner >& AIS_InteractiveContext::DetectedOwner ( ) const

inline

Returns the owner of the detected sensitive primitive which is currently dynamically highlighted. WARNING! This method is irrelevant to InitDetected()/MoreDetected()/NextDetected().

See also: HasDetected()/HasNextDetected()/HilightPreviousDetected()/HilightNextDetected().

◆ DetectedShape()

const TopoDS_Shape& AIS_InteractiveContext::DetectedShape ( ) const

Returns the shape detected in local context.

See also: DetectedOwner()

Deprecated:: ("Local Context is deprecated - local selection should be used without Local Context")

◆ DeviationAngle()

Standard_Real AIS_InteractiveContext::DeviationAngle ( ) const

Sets the deviation coefficient theCoefficient. Drawings of curves or patches are made with respect to a maximal chordal deviation. A Deviation coefficient is used in the shading display mode. The shape is seen decomposed into triangles. These are used to calculate reflection of light from the surface of the object. The triangles are formed from chords of the curves in the shape. The deviation coefficient theCoefficient gives the highest value of the angle with which a chord can deviate from a tangent to a curve. If this limit is reached, a new triangle is begun. This deviation is absolute and is set through the method: SetMaximalChordialDeviation. The default value is 0.001. In drawing shapes, however, you are allowed to ask for a relative deviation. This deviation will be: SizeOfObject * DeviationCoefficient.

◆ DeviationCoefficient()

Standard_Real AIS_InteractiveContext::DeviationCoefficient ( ) const

Returns the deviation coefficient. Drawings of curves or patches are made with respect to a maximal chordal deviation. A Deviation coefficient is used in the shading display mode. The shape is seen decomposed into triangles. These are used to calculate reflection of light from the surface of the object. The triangles are formed from chords of the curves in the shape. The deviation coefficient gives the highest value of the angle with which a chord can deviate from a tangent to a curve. If this limit is reached, a new triangle is begun. This deviation is absolute and is set through Prs3d_Drawer::SetMaximalChordialDeviation. The default value is 0.001. In drawing shapes, however, you are allowed to ask for a relative deviation. This deviation will be: SizeOfObject * DeviationCoefficient.

◆ DisableDrawHiddenLine()

void AIS_InteractiveContext::DisableDrawHiddenLine ( ) const

Initializes hidden line aspect in the default drawing tool, or Drawer. The default values are: Color: Quantity_NOC_YELLOW Type of line: Aspect_TOL_DASH Width: 1.

◆ Disconnect()

void AIS_InteractiveContext::Disconnect	(	const Handle< AIS_InteractiveObject > &	theAssembly,
		const Handle< AIS_InteractiveObject > &	theObjToDisconnect = `NULL`
	)

Disconnects theObjToDisconnect from theAssembly and removes dependent selection structures.

◆ Display() [1/3]

void AIS_InteractiveContext::Display	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Boolean	theToUpdateViewer
	)

Displays the object in this Context using default Display Mode. This will be the object's default display mode, if there is one. Otherwise, it will be the context mode. The Interactive Object's default selection mode is activated if GetAutoActivateSelection() is TRUE. In general, this is 0.

◆ Display() [2/3]

void AIS_InteractiveContext::Display	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Integer	theDispMode,
		const Standard_Integer	theSelectionMode,
		const Standard_Boolean	theToUpdateViewer,
		const AIS_DisplayStatus	theDispStatus = `AIS_DS_None`
	)

Sets status, display mode and selection mode for specified Object If theSelectionMode equals -1, theIObj will not be activated: it will be displayed but will not be selectable.

◆ Display() [3/3]

void AIS_InteractiveContext::Display	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Integer	theDispMode,
		const Standard_Integer	theSelectionMode,
		const Standard_Boolean	theToUpdateViewer,
		const Standard_Boolean	theToAllowDecomposition,
		const AIS_DisplayStatus	theDispStatus = `AIS_DS_None`
	)

inline

Deprecated:: ("Deprecated method Display() with obsolete argument theToAllowDecomposition")

◆ DisplayActiveSensitive() [1/2]

void AIS_InteractiveContext::DisplayActiveSensitive ( const Handle< V3d_View > & aView )

Visualization of sensitives - for debugging purposes!

◆ DisplayActiveSensitive() [2/2]

void AIS_InteractiveContext::DisplayActiveSensitive	(	const Handle< AIS_InteractiveObject > &	anObject,
		const Handle< V3d_View > &	aView
	)

Visualization of sensitives - for debugging purposes!

◆ DisplayAll()

void AIS_InteractiveContext::DisplayAll ( const Standard_Boolean theToUpdateViewer )

Displays all hidden objects.

◆ DisplayedObjects() [1/2]

void AIS_InteractiveContext::DisplayedObjects ( AIS_ListOfInteractive & aListOfIO ) const

Returns the list of displayed objects of a particular Type WhichKind and Signature WhichSignature. By Default, WhichSignature equals -1. This means that there is a check on type only.

◆ DisplayedObjects() [2/2]

void AIS_InteractiveContext::DisplayedObjects	(	const AIS_KindOfInteractive	theWhichKind,
		const Standard_Integer	theWhichSignature,
		AIS_ListOfInteractive &	theListOfIO
	)		const

gives the list of displayed objects of a particular Type and signature. by Default, <WhichSignature> = -1 means control only on <WhichKind>.

◆ DisplayMode()

Standard_Integer AIS_InteractiveContext::DisplayMode ( ) const

inline

Returns the Display Mode setting to be used by default.

◆ DisplayPriority()

Standard_Integer AIS_InteractiveContext::DisplayPriority ( const Handle< AIS_InteractiveObject > & theIObj ) const

Returns the display priority of the Object.

◆ DisplaySelected()

void AIS_InteractiveContext::DisplaySelected ( const Standard_Boolean theToUpdateViewer )

Displays current objects.

◆ DisplayStatus()

AIS_DisplayStatus AIS_InteractiveContext::DisplayStatus ( const Handle< AIS_InteractiveObject > & anIobj ) const

Returns the display status of the entity anIobj. This will be one of the following:

AIS_DS_Displayed displayed in main viewer
AIS_DS_Erased hidden in main viewer
AIS_DS_Temporary temporarily displayed
AIS_DS_None nowhere displayed.

◆ DrawHiddenLine()

Standard_Boolean AIS_InteractiveContext::DrawHiddenLine ( ) const

returns Standard_True if the hidden lines are to be drawn. By default the hidden lines are not drawn.

◆ DumpJson()

virtual void AIS_InteractiveContext::DumpJson	(	Standard_OStream &	theOStream,
		Standard_Integer	theDepth = `-1`
	)		const

virtual

Dumps the content of me into the stream.

◆ EnableDrawHiddenLine()

void AIS_InteractiveContext::EnableDrawHiddenLine ( ) const

Initializes hidden line aspect in the default drawing tool, or Drawer. The default values are: Color: Quantity_NOC_YELLOW Type of line: Aspect_TOL_DASH Width: 1.

◆ EndImmediateDraw() [1/2]

Standard_Boolean AIS_InteractiveContext::EndImmediateDraw ( const Handle< V3d_View > & theView )

returns True if the immediate display has been done.

◆ EndImmediateDraw() [2/2]

Standard_Boolean AIS_InteractiveContext::EndImmediateDraw ( )

Uses the First Active View of Main Viewer! returns True if the immediate display has been done.

◆ EntityOwners()

void AIS_InteractiveContext::EntityOwners	(	Handle< SelectMgr_IndexedMapOfOwner > &	theOwners,
		const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Integer	theMode = `-1`
	)		const

Returns a collection containing all entity owners created for the interactive object in specified selection mode (in all active modes if the Mode == -1)

◆ Erase()

void AIS_InteractiveContext::Erase	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Boolean	theToUpdateViewer
	)

Hides the object. The object's presentations are simply flagged as invisible and therefore excluded from redrawing. To show hidden objects, use Display().

◆ EraseAll()

void AIS_InteractiveContext::EraseAll ( const Standard_Boolean theToUpdateViewer )

Hides all objects. The object's presentations are simply flagged as invisible and therefore excluded from redrawing. To show all hidden objects, use DisplayAll().

◆ ErasedObjects() [1/2]

void AIS_InteractiveContext::ErasedObjects ( AIS_ListOfInteractive & theListOfIO ) const

Returns the list theListOfIO of erased objects (hidden objects) particular Type WhichKind and Signature WhichSignature. By Default, WhichSignature equals 1. This means that there is a check on type only.

◆ ErasedObjects() [2/2]

void AIS_InteractiveContext::ErasedObjects	(	const AIS_KindOfInteractive	theWhichKind,
		const Standard_Integer	theWhichSignature,
		AIS_ListOfInteractive &	theListOfIO
	)		const

gives the list of erased objects (hidden objects) Type and signature by Default, <WhichSignature> = -1 means control only on <WhichKind>.

◆ EraseGlobal()

void AIS_InteractiveContext::EraseGlobal	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Boolean	theToUpdateViewer
	)

protected

Helper function to unhighlight all entity owners currently highlighted with seleciton color.

◆ EraseSelected()

void AIS_InteractiveContext::EraseSelected ( const Standard_Boolean theToUpdateViewer )

Hides selected objects. The object's presentations are simply flagged as invisible and therefore excluded from redrawing. To show hidden objects, use Display().

◆ Filters()

const SelectMgr_ListOfFilter& AIS_InteractiveContext::Filters ( ) const

Returns the list of filters active in a local context.

◆ FilterType()

SelectMgr_FilterType AIS_InteractiveContext::FilterType ( ) const

inline

Returns: the context selection filter type.

◆ FirstSelectedObject()

Handle< AIS_InteractiveObject > AIS_InteractiveContext::FirstSelectedObject ( ) const

Returns the first selected object in the list of current selected.

◆ FitSelected() [1/2]

void AIS_InteractiveContext::FitSelected	(	const Handle< V3d_View > &	theView,
		const Standard_Real	theMargin,
		const Standard_Boolean	theToUpdate
	)

Fits the view correspondingly to the bounds of selected objects. Infinite objects are ignored if infinite state of AIS_InteractiveObject is set to true.

◆ FitSelected() [2/2]

void AIS_InteractiveContext::FitSelected ( const Handle< V3d_View > & theView )

Fits the view correspondingly to the bounds of selected objects. Infinite objects are ignored if infinite state of AIS_InteractiveObject is set to true.

◆ GetAutoActivateSelection()

Standard_Boolean AIS_InteractiveContext::GetAutoActivateSelection ( ) const

inline

Manages displaying the new object should also automatically activate default selection mode; TRUE by default.

◆ GetDefModes()

void AIS_InteractiveContext::GetDefModes	(	const Handle< AIS_InteractiveObject > &	anIobj,
		Standard_Integer &	Dmode,
		Standard_Integer &	HiMod,
		Standard_Integer &	SelMode
	)		const

protected

Helper function to unhighlight all entity owners currently highlighted with seleciton color.

◆ getHilightMode()

Standard_Integer AIS_InteractiveContext::getHilightMode	(	const Handle< AIS_InteractiveObject > &	theObj,
		const Handle< Prs3d_Drawer > &	theStyle,
		const Standard_Integer	theDispMode
	)		const

inlineprotected

Return display mode for highlighting.

◆ getHiStyle()

const Handle< Prs3d_Drawer >& AIS_InteractiveContext::getHiStyle	(	const Handle< AIS_InteractiveObject > &	theObj,
		const Handle< SelectMgr_EntityOwner > &	theOwner
	)		const

inlineprotected

Helper function that returns correct dynamic highlight style for the object: if custom style is defined via object's highlight drawer, it will be used. Otherwise, dynamic highlight style of interactive context will be returned.

Parameters

theObj [in] the object to check

◆ getSelStyle()

const Handle< Prs3d_Drawer >& AIS_InteractiveContext::getSelStyle	(	const Handle< AIS_InteractiveObject > &	theObj,
		const Handle< SelectMgr_EntityOwner > &	theOwner
	)		const

inlineprotected

Helper function that returns correct selection style for the object: if custom style is defined via object's highlight drawer, it will be used. Otherwise, selection style of interactive context will be returned.

Parameters

theObj [in] the object to check

◆ GetZLayer()

Graphic3d_ZLayerId AIS_InteractiveContext::GetZLayer ( const Handle< AIS_InteractiveObject > & theIObj ) const

Get Z layer id set for displayed interactive object.

◆ GravityPoint()

virtual gp_Pnt AIS_InteractiveContext::GravityPoint ( const Handle< V3d_View > & theView ) const

virtual

Return rotation gravity point.

◆ HasApplicative()

Standard_Boolean AIS_InteractiveContext::HasApplicative ( ) const

inline

Returns SelectedInteractive()->HasOwner().

See also: SelectedOwner().

◆ HasColor()

Standard_Boolean AIS_InteractiveContext::HasColor ( const Handle< AIS_InteractiveObject > & aniobj ) const

Returns true if a view of the Interactive Object has color.

◆ HasDetected()

Standard_Boolean AIS_InteractiveContext::HasDetected ( ) const

inline

Returns true if there is a mouse-detected entity in context.

See also: DetectedOwner()/HasNextDetected()/HilightPreviousDetected()/HilightNextDetected().

◆ HasDetectedShape()

Standard_Boolean AIS_InteractiveContext::HasDetectedShape ( ) const

Returns true if there is a detected shape in local context.

See also: HasDetected()/DetectedShape()

Deprecated:: ("Local Context is deprecated - local selection should be used without Local Context")

◆ HasLocation()

Standard_Boolean AIS_InteractiveContext::HasLocation ( const Handle< AIS_InteractiveObject > & theObject ) const

Returns true if the Object has a location.

◆ HasNextDetected()

Standard_Boolean AIS_InteractiveContext::HasNextDetected ( ) const

inline

returns True if other entities were detected in the last mouse detection

See also: HilightPreviousDetected()/HilightNextDetected().

◆ HasPolygonOffsets()

Standard_Boolean AIS_InteractiveContext::HasPolygonOffsets ( const Handle< AIS_InteractiveObject > & anObj ) const

Simply calls AIS_InteractiveObject::HasPolygonOffsets().

◆ HasSelectedShape()

Standard_Boolean AIS_InteractiveContext::HasSelectedShape ( ) const

Returns TRUE if the interactive context has a shape selected.

See also: SelectedShape().

◆ HiddenLineAspect()

Handle< Prs3d_LineAspect > AIS_InteractiveContext::HiddenLineAspect ( ) const

Initializes hidden line aspect in the default drawing tool, or Drawer. The default values are: Color: Quantity_NOC_YELLOW Type of line: Aspect_TOL_DASH Width: 1.

◆ highlightGlobal()

void AIS_InteractiveContext::highlightGlobal	(	const Handle< AIS_InteractiveObject > &	theObj,
		const Handle< Prs3d_Drawer > &	theStyle,
		const Standard_Integer	theDispMode
	)

protected

Helper function that highlights global owner of the object given with <theStyle> with check for AutoHighlight, e.g. is used for selection. If global owner is null, it simply highlights the whole object.

◆ highlightOwners()

void AIS_InteractiveContext::highlightOwners ( const AIS_NListOfEntityOwner & theOwners )

protected

Helper function that highlights the owners with check for AutoHighlight, e.g. is used for selection.

◆ highlightSelected()

void AIS_InteractiveContext::highlightSelected ( const Handle< SelectMgr_EntityOwner > & theOwner )

protected

Helper function that highlights the owner given with <theStyle> with check for AutoHighlight, e.g. is used for selection.

◆ HighlightStyle() [1/4]

const Handle< Prs3d_Drawer >& AIS_InteractiveContext::HighlightStyle ( const Prs3d_TypeOfHighlight theStyleType ) const

inline

Returns highlight style settings.

◆ HighlightStyle() [2/4]

const Handle< Prs3d_Drawer >& AIS_InteractiveContext::HighlightStyle ( ) const

inline

Returns current dynamic highlight style settings. By default:

the color of dynamic highlight is Quantity_NOC_CYAN1;
the presentation for dynamic highlight is completely opaque;
the type of highlight is Aspect_TOHM_COLOR.

◆ HighlightStyle() [3/4]

Standard_Boolean AIS_InteractiveContext::HighlightStyle	(	const Handle< AIS_InteractiveObject > &	theObj,
		Handle< Prs3d_Drawer > &	theStyle
	)		const

Returns highlight style of the object if it is marked as highlighted via global status.

Parameters

theObj [in] the object to check

◆ HighlightStyle() [4/4]

Standard_Boolean AIS_InteractiveContext::HighlightStyle	(	const Handle< SelectMgr_EntityOwner > &	theOwner,
		Handle< Prs3d_Drawer > &	theStyle
	)		const

Returns highlight style of the owner if it is selected.

Parameters

theOwner [in] the owner to check

◆ highlightWithColor()

void AIS_InteractiveContext::highlightWithColor	(	const Handle< SelectMgr_EntityOwner > &	theOwner,
		const Handle< V3d_Viewer > &	theViewer = `NULL`
	)

protected

Helper function that highlights the owner given with <theStyle> without performing AutoHighlight checks, e.g. is used for dynamic highlight.

◆ highlightWithSubintensity() [1/2]

void AIS_InteractiveContext::highlightWithSubintensity	(	const Handle< AIS_InteractiveObject > &	theObject,
		const Standard_Integer	theMode
	)		const

protected

Helper function that highlights the object with sub-intensity color without any checks.

Parameters

theObject	[in] the object that will be highlighted
theMode	[in] display mode

◆ highlightWithSubintensity() [2/2]

void AIS_InteractiveContext::highlightWithSubintensity	(	const Handle< SelectMgr_EntityOwner > &	theOwner,
		const Standard_Integer	theMode
	)		const

protected

Helper function that highlights the owner with sub-intensity color without any checks.

Parameters

theOwner	[in] the owner that will be highlighted
theMode	[in] display mode

◆ Hilight()

void AIS_InteractiveContext::Hilight	(	const Handle< AIS_InteractiveObject > &	theObj,
		const Standard_Boolean	theIsToUpdateViewer
	)

inline

Updates the display in the viewer to take dynamic detection into account. On dynamic detection by the mouse cursor, sensitive primitives are highlighted. The highlight color of entities detected by mouse movement is white by default.

Deprecated:: ("Deprecated method Hilight()")

◆ HilightCurrents()

void AIS_InteractiveContext::HilightCurrents ( const Standard_Boolean theToUpdateViewer )

inline

Highlights current objects. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects.

Deprecated:: ("Local Context is deprecated - local selection should be used without Local Context")

◆ HilightNextDetected()

Standard_Integer AIS_InteractiveContext::HilightNextDetected	(	const Handle< V3d_View > &	theView,
		const Standard_Boolean	theToRedrawImmediate = `Standard_True`
	)

If more than 1 object is detected by the selector, only the "best" owner is hilighted at the mouse position. This Method allows the user to hilight one after another the other detected entities. If The method select is called, the selected entity will be the hilighted one! WARNING: Loop Method. When all the detected entities have been hilighted, the next call will hilight the first one again.

Returns: the Rank of hilighted entity

See also: HasNextDetected()/HilightPreviousDetected().

◆ HilightPreviousDetected()

Standard_Integer AIS_InteractiveContext::HilightPreviousDetected	(	const Handle< V3d_View > &	theView,
		const Standard_Boolean	theToRedrawImmediate = `Standard_True`
	)

Same as previous methods in reverse direction.

See also: HasNextDetected()/HilightNextDetected().

◆ HilightSelected()

void AIS_InteractiveContext::HilightSelected ( const Standard_Boolean theToUpdateViewer )

Highlights selected objects.

◆ HilightWithColor()

void AIS_InteractiveContext::HilightWithColor	(	const Handle< AIS_InteractiveObject > &	theObj,
		const Handle< Prs3d_Drawer > &	theStyle,
		const Standard_Boolean	theToUpdateViewer
	)

Changes the color of all the lines of the object in view.

◆ ImmediateAdd()

Standard_Boolean AIS_InteractiveContext::ImmediateAdd	(	const Handle< AIS_InteractiveObject > &	theObj,
		const Standard_Integer	theMode = `0`
	)

returns True if <anIObj> has been stored in the list.

◆ InitAttributes()

void AIS_InteractiveContext::InitAttributes ( )

protected

Helper function to unhighlight all entity owners currently highlighted with seleciton color.

◆ InitCurrent()

void AIS_InteractiveContext::InitCurrent ( )

inline

Initializes a scan of the current selected objects in Neutral Point. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects.

Deprecated:: ("Local Context is deprecated - local selection should be used without Local Context")

◆ InitDetected()

void AIS_InteractiveContext::InitDetected ( )

inline

Initialization for iteration through mouse-detected objects in interactive context or in local context if it is opened.

See also: DetectedCurrentOwner()/MoreDetected()/NextDetected().

◆ InitSelected()

void AIS_InteractiveContext::InitSelected ( )

inline

Initializes a scan of the selected objects.

See also: SelectedOwner()/MoreSelected()/NextSelected().

◆ IsCurrent()

Standard_Boolean AIS_InteractiveContext::IsCurrent ( const Handle< AIS_InteractiveObject > & theObject ) const

inline

Returns true if there is a non-null interactive object in Neutral Point. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects.

Deprecated:: ("Local Context is deprecated - local selection should be used without Local Context")

◆ IsDisplayed() [1/2]

Standard_Boolean AIS_InteractiveContext::IsDisplayed ( const Handle< AIS_InteractiveObject > & anIobj ) const

Returns true if Object is displayed in the interactive context.

◆ IsDisplayed() [2/2]

Standard_Boolean AIS_InteractiveContext::IsDisplayed	(	const Handle< AIS_InteractiveObject > &	aniobj,
		const Standard_Integer	aMode
	)		const

Constructs the interactive context object defined by the principal viewer MainViewer.

◆ IsHilighted() [1/2]

Standard_Boolean AIS_InteractiveContext::IsHilighted ( const Handle< AIS_InteractiveObject > & theObj ) const

Returns true if the object is marked as highlighted via its global status.

Parameters

theObj [in] the object to check

◆ IsHilighted() [2/2]

Standard_Boolean AIS_InteractiveContext::IsHilighted ( const Handle< SelectMgr_EntityOwner > & theOwner ) const

Returns true if the owner is marked as selected.

Parameters

theOwner [in] the owner to check

◆ IsImmediateModeOn()

Standard_Boolean AIS_InteractiveContext::IsImmediateModeOn ( ) const

initializes the list of presentations to be displayed returns False if no local context is opened.

◆ IsoNumber()

Standard_Integer AIS_InteractiveContext::IsoNumber ( const AIS_TypeOfIso WhichIsos = AIS_TOI_Both )

Returns the number of U and V isoparameters displayed.

◆ IsoOnPlane() [1/2]

void AIS_InteractiveContext::IsoOnPlane ( const Standard_Boolean SwitchOn )

Returns True if drawing isoparameters on planes is enabled.

◆ IsoOnPlane() [2/2]

Standard_Boolean AIS_InteractiveContext::IsoOnPlane ( ) const

Returns True if drawing isoparameters on planes is enabled. if <forUIsos> = False,.

◆ IsoOnTriangulation() [1/3]

void AIS_InteractiveContext::IsoOnTriangulation	(	const Standard_Boolean	theIsEnabled,
		const Handle< AIS_InteractiveObject > &	theObject
	)

Enables or disables on-triangulation build for isolines for a particular object. In case if on-triangulation builder is disabled, default on-plane builder will compute isolines for the object given.

◆ IsoOnTriangulation() [2/3]

void AIS_InteractiveContext::IsoOnTriangulation ( const Standard_Boolean theToSwitchOn )

Enables or disables on-triangulation build for isolines for default drawer. In case if on-triangulation builder is disabled, default on-plane builder will compute isolines for the object given.

◆ IsoOnTriangulation() [3/3]

Standard_Boolean AIS_InteractiveContext::IsoOnTriangulation ( ) const

Returns true if drawing isolines on triangulation algorithm is enabled.

◆ IsSelected() [1/2]

Standard_Boolean AIS_InteractiveContext::IsSelected ( const Handle< SelectMgr_EntityOwner > & theOwner ) const

inline

Returns true is the owner given is selected.

◆ IsSelected() [2/2]

Standard_Boolean AIS_InteractiveContext::IsSelected ( const Handle< AIS_InteractiveObject > & theObj ) const

Returns true is the object given is selected.

◆ isSlowHiStyle()

Standard_Boolean AIS_InteractiveContext::isSlowHiStyle	(	const Handle< SelectMgr_EntityOwner > &	theOwner,
		const Handle< V3d_Viewer > &	theViewer
	)		const

protected

Return TRUE if highlight style of owner requires full viewer redraw.

◆ LastActiveView()

Handle< V3d_View > AIS_InteractiveContext::LastActiveView ( ) const

Returns last active View (argument of MoveTo()/Select() methods).

◆ Load() [1/2]

void AIS_InteractiveContext::Load	(	const Handle< AIS_InteractiveObject > &	theObj,
		const Standard_Integer	theSelectionMode = `-1`
	)

Allows you to load the Interactive Object with a given selection mode, and/or with the desired decomposition option, whether the object is visualized or not. The loaded objects will be selectable but displayable in highlighting only when detected by the Selector.

◆ Load() [2/2]

void AIS_InteractiveContext::Load	(	const Handle< AIS_InteractiveObject > &	theObj,
		Standard_Integer	theSelectionMode,
		Standard_Boolean
	)

inline

Deprecated:: ("Deprecated method Load() with obsolete last argument theToAllowDecomposition")

◆ Location()

TopLoc_Location AIS_InteractiveContext::Location ( const Handle< AIS_InteractiveObject > & theObject ) const

Returns the location of the Object.

◆ MainPrsMgr()

const Handle< PrsMgr_PresentationManager3d >& AIS_InteractiveContext::MainPrsMgr ( ) const

inline

Returns the default attribute manager. This contains all the color and line attributes which can be used by interactive objects which do not have their own attributes.

◆ MainSelector()

const Handle< StdSelect_ViewerSelector3d >& AIS_InteractiveContext::MainSelector ( ) const

inline

Returns the default attribute manager. This contains all the color and line attributes which can be used by interactive objects which do not have their own attributes.

◆ MoreCurrent()

Standard_Boolean AIS_InteractiveContext::MoreCurrent ( ) const

inline

Returns true if there is another object found by the scan of the list of current objects. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects.

Deprecated:: ("Local Context is deprecated - local selection should be used without Local Context")

◆ MoreDetected()

Standard_Boolean AIS_InteractiveContext::MoreDetected ( ) const

inline

Return TRUE if there is more mouse-detected objects after the current one during iteration through mouse-detected interactive objects.

See also: DetectedCurrentOwner()/InitDetected()/NextDetected().

◆ MoreSelected()

Standard_Boolean AIS_InteractiveContext::MoreSelected ( ) const

inline

Returns true if there is another object found by the scan of the list of selected objects.

See also: SelectedOwner()/InitSelected()/NextSelected().

◆ MoveTo()

AIS_StatusOfDetection AIS_InteractiveContext::MoveTo	(	const Standard_Integer	theXPix,
		const Standard_Integer	theYPix,
		const Handle< V3d_View > &	theView,
		const Standard_Boolean	theToRedrawOnUpdate
	)

Relays mouse position in pixels theXPix and theYPix to the interactive context selectors. This is done by the view theView passing this position to the main viewer and updating it. If theToRedrawOnUpdate is set to false, callee should call RedrawImmediate() to highlight detected object.

See also: PickingStrategy()

◆ NbCurrents()

Standard_Integer AIS_InteractiveContext::NbCurrents ( )

inline

Deprecated:: ("Local Context is deprecated - local selection should be used without Local Context")

◆ NbSelected()

Standard_Integer AIS_InteractiveContext::NbSelected ( )

inline

Count a number of selected entities using InitSelected()+MoreSelected()+NextSelected() iterator.

See also: SelectedOwner()/InitSelected()/MoreSelected()/NextSelected().

◆ NextCurrent()

void AIS_InteractiveContext::NextCurrent ( )

inline

Continues the scan to the next object in the list of current objects. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects.

Deprecated:: ("Local Context is deprecated - local selection should be used without Local Context")

◆ NextDetected()

void AIS_InteractiveContext::NextDetected ( )

inline

Gets next current object during iteration through mouse-detected interactive objects.

See also: DetectedCurrentOwner()/InitDetected()/MoreDetected().

◆ NextSelected()

void AIS_InteractiveContext::NextSelected ( )

inline

Continues the scan to the next object in the list of selected objects.

See also: SelectedOwner()/InitSelected()/MoreSelected().

◆ ObjectsByDisplayStatus() [1/2]

void AIS_InteractiveContext::ObjectsByDisplayStatus	(	const AIS_DisplayStatus	theStatus,
		AIS_ListOfInteractive &	theListOfIO
	)		const

Returns the list theListOfIO of objects with indicated display status particular Type WhichKind and Signature WhichSignature. By Default, WhichSignature equals 1. This means that there is a check on type only.

◆ ObjectsByDisplayStatus() [2/2]

void AIS_InteractiveContext::ObjectsByDisplayStatus	(	const AIS_KindOfInteractive	WhichKind,
		const Standard_Integer	WhichSignature,
		const AIS_DisplayStatus	theStatus,
		AIS_ListOfInteractive &	theListOfIO
	)		const

gives the list of objects with indicated display status Type and signature by Default, <WhichSignature> = -1 means control only on <WhichKind>.

◆ ObjectsForView()

void AIS_InteractiveContext::ObjectsForView	(	AIS_ListOfInteractive &	theListOfIO,
		const Handle< V3d_View > &	theView,
		const Standard_Boolean	theIsVisibleInView,
		const AIS_DisplayStatus	theStatus = `AIS_DS_None`
	)		const

Query objects visible or hidden in specified view due to affinity mask.

◆ ObjectsInside()

void AIS_InteractiveContext::ObjectsInside	(	AIS_ListOfInteractive &	aListOfIO,
		const AIS_KindOfInteractive	WhichKind = `AIS_KOI_None`,
		const Standard_Integer	WhichSignature = `-1`
	)		const

fills <aListOfIO> with objects of a particular Type and Signature with no consideration of display status. by Default, <WhichSignature> = -1 means control only on <WhichKind>. if <WhichKind> = AIS_KOI_None and <WhichSignature> = -1, all the objects are put into the list.

◆ PickingStrategy()

SelectMgr_PickingStrategy AIS_InteractiveContext::PickingStrategy ( ) const

inline

Return picking strategy; SelectMgr_PickingStrategy_FirstAcceptable by default.

See also: MoveTo()/Filters()

◆ PixelTolerance()

Standard_Integer AIS_InteractiveContext::PixelTolerance ( ) const

Returns the pixel tolerance, default is 2. Pixel Tolerance extends sensitivity within MoveTo() operation (picking by point) and can be adjusted by application based on user input precision (e.g. screen pixel density, input device precision, etc.).

◆ PlaneSize()

Standard_Boolean AIS_InteractiveContext::PlaneSize	(	Standard_Real &	XSize,
		Standard_Real &	YSize
	)		const

Returns true if the length in the X direction XSize is the same as that in the Y direction YSize.

◆ PolygonOffsets()

void AIS_InteractiveContext::PolygonOffsets	(	const Handle< AIS_InteractiveObject > &	anObj,
		Standard_Integer &	aMode,
		Standard_ShortReal &	aFactor,
		Standard_ShortReal &	aUnits
	)		const

Retrieves current polygon offsets settings for Object.

◆ PurgeDisplay()

Standard_Integer AIS_InteractiveContext::PurgeDisplay ( )

Clears all the structures which don't belong to objects displayed at neutral point only effective when no Local Context is opened... returns the number of removed structures from the viewers.

◆ PurgeViewer()

Standard_Integer AIS_InteractiveContext::PurgeViewer ( const Handle< V3d_Viewer > & Vwr )

protected

Helper function to unhighlight all entity owners currently highlighted with seleciton color.

◆ RebuildSelectionStructs()

void AIS_InteractiveContext::RebuildSelectionStructs ( )

Rebuilds 1st level of BVH selection forcibly.

◆ RecomputePrsOnly()

void AIS_InteractiveContext::RecomputePrsOnly	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Boolean	theToUpdateViewer,
		const Standard_Boolean	theAllModes = `Standard_False`
	)

Recomputes the displayed presentations, flags the others. Doesn't update presentations.

◆ RecomputeSelectionOnly()

void AIS_InteractiveContext::RecomputeSelectionOnly ( const Handle< AIS_InteractiveObject > & anIObj )

Recomputes the active selections, flags the others. Doesn't update presentations.

◆ Redisplay() [1/2]

void AIS_InteractiveContext::Redisplay	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Boolean	theToUpdateViewer,
		const Standard_Boolean	theAllModes = `Standard_False`
	)

Recomputes the seen parts presentation of the Object. If theAllModes equals true, all presentations are present in the object even if unseen.

◆ Redisplay() [2/2]

void AIS_InteractiveContext::Redisplay	(	const AIS_KindOfInteractive	theTypeOfObject,
		const Standard_Integer	theSignature,
		const Standard_Boolean	theToUpdateViewer
	)

Recomputes the Prs/Selection of displayed objects of a given type and a given signature. if signature = -1 doesn't take signature criterion.

◆ RedrawImmediate()

void AIS_InteractiveContext::RedrawImmediate ( const Handle< V3d_Viewer > & theViewer )

inline

Redraws immediate structures in all views of the viewer given taking into account its visibility.

◆ Remove()

void AIS_InteractiveContext::Remove	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Boolean	theToUpdateViewer
	)

Removes Object from every viewer.

◆ RemoveAll()

void AIS_InteractiveContext::RemoveAll ( const Standard_Boolean theToUpdateViewer )

Removes all the objects from Context.

◆ RemoveFilter()

void AIS_InteractiveContext::RemoveFilter ( const Handle< SelectMgr_Filter > & theFilter )

Removes a filter from context.

◆ RemoveFilters()

void AIS_InteractiveContext::RemoveFilters ( )

Remove all filters from context.

◆ ResetLocation()

void AIS_InteractiveContext::ResetLocation ( const Handle< AIS_InteractiveObject > & theObject )

Puts the Object back into its initial position.

◆ Select() [1/3]

AIS_StatusOfPick AIS_InteractiveContext::Select	(	const Standard_Integer	theXPMin,
		const Standard_Integer	theYPMin,
		const Standard_Integer	theXPMax,
		const Standard_Integer	theYPMax,
		const Handle< V3d_View > &	theView,
		const Standard_Boolean	theToUpdateViewer
	)

Selects everything found in the bounding rectangle defined by the pixel minima and maxima, XPMin, YPMin, XPMax, and YPMax in the view. The objects detected are passed to the main viewer, which is then updated.

◆ Select() [2/3]

AIS_StatusOfPick AIS_InteractiveContext::Select	(	const TColgp_Array1OfPnt2d &	thePolyline,
		const Handle< V3d_View > &	theView,
		const Standard_Boolean	theToUpdateViewer
	)

polyline selection; clears the previous picked list

◆ Select() [3/3]

AIS_StatusOfPick AIS_InteractiveContext::Select ( const Standard_Boolean theToUpdateViewer )

Stores and hilights the previous detected; Unhilights the previous picked.

See also: MoveTo().

◆ SelectedInteractive()

Handle< AIS_InteractiveObject > AIS_InteractiveContext::SelectedInteractive ( ) const

inline

Return Handle(AIS_InteractiveObject)::DownCast (SelectedOwner()->Selectable()).

See also: SelectedOwner().

◆ SelectedOwner()

Handle< SelectMgr_EntityOwner > AIS_InteractiveContext::SelectedOwner ( ) const

inline

Returns the owner of the selected entity.

See also: InitSelected()/MoreSelected()/NextSelected().

◆ SelectedShape()

TopoDS_Shape AIS_InteractiveContext::SelectedShape ( ) const

Returns the selected shape. Basically it is just a shape returned stored by StdSelect_BRepOwner with graphic transformation being applied:

const Handle(StdSelect_BRepOwner) aBRepOwner = Handle(StdSelect_BRepOwner)::DownCast (SelectedOwner());
TopoDS_Shape aSelShape     = aBRepOwner->Shape();
TopoDS_Shape aLocatedShape = aSelShape.Located (aBRepOwner->Location() * aSelShape.Location());

See also: SelectedOwner()/HasSelectedShape().

◆ Selection()

const Handle< AIS_Selection >& AIS_InteractiveContext::Selection ( ) const

inline

Returns selection instance.

◆ SelectionManager()

const Handle< SelectMgr_SelectionManager >& AIS_InteractiveContext::SelectionManager ( ) const

inline

Returns the default attribute manager. This contains all the color and line attributes which can be used by interactive objects which do not have their own attributes.

◆ SelectionStyle()

const Handle< Prs3d_Drawer >& AIS_InteractiveContext::SelectionStyle ( ) const

inline

Returns current selection style settings. By default:

the color of selection is Quantity_NOC_GRAY80;
the presentation for selection is completely opaque;
the type of highlight is Aspect_TOHM_COLOR.

◆ SetAngleAndDeviation()

void AIS_InteractiveContext::SetAngleAndDeviation	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Real	theAngle,
		const Standard_Boolean	theToUpdateViewer
	)

Calls the AIS_Shape SetAngleAndDeviation to set both Angle and Deviation coefficients.

◆ SetAutoActivateSelection()

void AIS_InteractiveContext::SetAutoActivateSelection ( const Standard_Boolean theIsAuto )

inline

Enable or disable automatic activation of default selection mode while displaying the object.

◆ SetAutomaticHilight()

void AIS_InteractiveContext::SetAutomaticHilight ( Standard_Boolean theStatus )

inline

Sets the highlighting status of detected and selected entities. This function allows you to disconnect the automatic mode.

MoveTo() will fill the list of detected entities and Select() will set selected state to detected objects regardless of this flag, but with disabled AutomaticHiligh() their highlighting state will be left unaffected, so that application will be able performing custom highlighting in a different way, if needed.

This API should be distinguished from SelectMgr_SelectableObject::SetAutoHilight() that is used to implement custom highlighting logic for a specific interactive object class.

See also: MoveTo(), Select(), HilightWithColor(), Unhilight()

◆ SetColor()

void AIS_InteractiveContext::SetColor	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Quantity_Color &	theColor,
		const Standard_Boolean	theToUpdateViewer
	)

Sets the color of the selected entity.

◆ setContextToObject()

void AIS_InteractiveContext::setContextToObject ( const Handle< AIS_InteractiveObject > & theObj )

inlineprotected

Assign the context to the object or throw exception if object was already assigned to another context.

◆ SetCurrentFacingModel()

void AIS_InteractiveContext::SetCurrentFacingModel	(	const Handle< AIS_InteractiveObject > &	aniobj,
		const Aspect_TypeOfFacingModel	aModel = `Aspect_TOFM_BOTH_SIDE`
	)

change the current facing model apply on polygons for SetColor(), SetTransparency(), SetMaterial() methods default facing model is Aspect_TOFM_TWO_SIDE. This mean that attributes is applying both on the front and back face.

◆ SetCurrentObject()

void AIS_InteractiveContext::SetCurrentObject	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Boolean	theToUpdateViewer
	)

inline

Updates the view of the current object in open context. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects.

Deprecated:: ("Local Context is deprecated - local selection should be used without Local Context")

◆ SetDeviationAngle() [1/2]

void AIS_InteractiveContext::SetDeviationAngle	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Real	theAngle,
		const Standard_Boolean	theToUpdateViewer
	)

Sets the deviation coefficient theCoefficient. Drawings of curves or patches are made with respect to a maximal chordal deviation. A Deviation coefficient is used in the shading display mode. The shape is seen decomposed into triangles. These are used to calculate reflection of light from the surface of the object. The triangles are formed from chords of the curves in the shape. The deviation coefficient theCoefficient gives the highest value of the angle with which a chord can deviate from a tangent to a curve. If this limit is reached, a new triangle is begun. This deviation is absolute and is set through the method: SetMaximalChordialDeviation. The default value is 0.001. In drawing shapes, however, you are allowed to ask for a relative deviation. This deviation will be: SizeOfObject * DeviationCoefficient.

◆ SetDeviationAngle() [2/2]

void AIS_InteractiveContext::SetDeviationAngle ( const Standard_Real anAngle )

default 20 degrees

◆ SetDeviationCoefficient() [1/2]

void AIS_InteractiveContext::SetDeviationCoefficient	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Real	theCoefficient,
		const Standard_Boolean	theToUpdateViewer
	)

Sets the deviation coefficient theCoefficient. Drawings of curves or patches are made with respect to a maximal chordal deviation. A Deviation coefficient is used in the shading display mode. The shape is seen decomposed into triangles. These are used to calculate reflection of light from the surface of the object. The triangles are formed from chords of the curves in the shape. The deviation coefficient theCoefficient gives the highest value of the angle with which a chord can deviate from a tangent to a curve. If this limit is reached, a new triangle is begun. This deviation is absolute and is set through the method: SetMaximalChordialDeviation. The default value is 0.001. In drawing shapes, however, you are allowed to ask for a relative deviation. This deviation will be: SizeOfObject * DeviationCoefficient.

◆ SetDeviationCoefficient() [2/2]

void AIS_InteractiveContext::SetDeviationCoefficient ( const Standard_Real theCoefficient )

Sets the deviation coefficient theCoefficient. Drawings of curves or patches are made with respect to a maximal chordal deviation. A Deviation coefficient is used in the shading display mode. The shape is seen decomposed into triangles. These are used to calculate reflection of light from the surface of the object. The triangles are formed from chords of the curves in the shape. The deviation coefficient theCoefficient gives the highest value of the angle with which a chord can deviate from a tangent to a curve. If this limit is reached, a new triangle is begun. This deviation is absolute and is set through the method: SetMaximalChordialDeviation. The default value is 0.001. In drawing shapes, however, you are allowed to ask for a relative deviation. This deviation will be: SizeOfObject * DeviationCoefficient.

◆ SetDisplayMode() [1/2]

void AIS_InteractiveContext::SetDisplayMode	(	const Standard_Integer	theMode,
		const Standard_Boolean	theToUpdateViewer
	)

Sets the display mode of seen Interactive Objects (which have no overridden Display Mode).

◆ SetDisplayMode() [2/2]

void AIS_InteractiveContext::SetDisplayMode	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Integer	theMode,
		const Standard_Boolean	theToUpdateViewer
	)

Sets the display mode of seen Interactive Objects. theMode provides the display mode index of the entity theIObj.

◆ SetDisplayPriority()

void AIS_InteractiveContext::SetDisplayPriority	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Integer	thePriority
	)

Sets the display priority of the seen parts presentation of the Object.

◆ SetFilterType()

void AIS_InteractiveContext::SetFilterType ( const SelectMgr_FilterType theFilterType )

inline

Sets the context selection filter type. SelectMgr_TypeFilter_OR selection filter is used by default.

Parameters

theFilterType the filter type.

◆ SetHiddenLineAspect()

void AIS_InteractiveContext::SetHiddenLineAspect ( const Handle< Prs3d_LineAspect > & anAspect ) const

Sets the hidden line aspect anAspect. Aspect defines display attributes for hidden lines in HLR projections.

◆ SetHighlightStyle() [1/2]

void AIS_InteractiveContext::SetHighlightStyle	(	const Prs3d_TypeOfHighlight	theStyleType,
		const Handle< Prs3d_Drawer > &	theStyle
	)

inline

Setup highlight style settings. It is preferred modifying existing style returned by method HighlightStyle() instead of creating a new drawer.

If a new highlight style is created, its presentation Zlayer should be checked, otherwise highlighting might not work as expected. Default values are:

Prs3d_TypeOfHighlight_Dynamic: Graphic3d_ZLayerId_Top, object highlighting is drawn on top of main scene within Immediate Layers, so that V3d_View::RedrawImmediate() will be enough to see update;
Prs3d_TypeOfHighlight_LocalDynamic: Graphic3d_ZLayerId_Topmost, object parts highlighting is drawn on top of main scene within Immediate Layers with depth cleared (even overlapped geometry will be revealed);
Prs3d_TypeOfHighlight_Selected: Graphic3d_ZLayerId_UNKNOWN, object highlighting is drawn on top of main scene within the same layer as object itself (e.g. Graphic3d_ZLayerId_Default by default) and increased priority.

◆ SetHighlightStyle() [2/2]

void AIS_InteractiveContext::SetHighlightStyle ( const Handle< Prs3d_Drawer > & theStyle )

inline

Setup the style of dynamic highlighting. It is preferred modifying existing style returned by method HighlightStyle() instead of creating a new drawer.

If a new highlight style is created, its presentation Zlayer should be checked, otherwise highlighting might not work as expected. Default value is Graphic3d_ZLayerId_Top, object highlighting is drawn on top of main scene within Immediate Layers, so that V3d_View::RedrawImmediate() will be enough to see update;

◆ SetIsoNumber()

void AIS_InteractiveContext::SetIsoNumber	(	const Standard_Integer	NbIsos,
		const AIS_TypeOfIso	WhichIsos = `AIS_TOI_Both`
	)

Sets the number of U and V isoparameters displayed.

◆ SetLocalAttributes()

void AIS_InteractiveContext::SetLocalAttributes	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Handle< Prs3d_Drawer > &	theDrawer,
		const Standard_Boolean	theToUpdateViewer
	)

Sets the graphic attributes of the interactive object, such as visualization mode, color, and material.

◆ SetLocation()

void AIS_InteractiveContext::SetLocation	(	const Handle< AIS_InteractiveObject > &	theObject,
		const TopLoc_Location &	theLocation
	)

Puts the location on the initial graphic representation and the selection for the Object.

◆ SetMaterial()

void AIS_InteractiveContext::SetMaterial	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Graphic3d_MaterialAspect &	theMaterial,
		const Standard_Boolean	theToUpdateViewer
	)

Provides the type of material setting for the view of the Object.

◆ setObjectStatus()

void AIS_InteractiveContext::setObjectStatus	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const AIS_DisplayStatus	theStatus,
		const Standard_Integer	theDispyMode,
		const Standard_Integer	theSelectionMode
	)

protected

Bind/Unbind status to object and its children.

Parameters

theObj	[in] the object to change status
theStatus	status, if NULL, unbind object

◆ SetPickingStrategy()

void AIS_InteractiveContext::SetPickingStrategy ( const SelectMgr_PickingStrategy theStrategy )

inline

Setup picking strategy - which entities detected by picking line will be accepted, considering Selection Filters. By default (SelectMgr_PickingStrategy_FirstAcceptable), Selection Filters reduce the list of entities so that the context accepts topmost in remaining.

This means that entities behind non-selectable (by filters) parts can be picked by user. If this behavior is undesirable, and user wants that non-selectable (by filters) parts should remain an obstacle for picking, SelectMgr_PickingStrategy_OnlyTopmost can be set instead.

Notice, that since Selection Manager operates only objects registered in it, SelectMgr_PickingStrategy_OnlyTopmost will NOT prevent picking entities behind visible by unregistered in Selection Manager presentations (e.g. deactivated). Hence, SelectMgr_PickingStrategy_OnlyTopmost changes behavior only with Selection Filters enabled.

◆ SetPixelTolerance()

void AIS_InteractiveContext::SetPixelTolerance ( const Standard_Integer thePrecision = 2 )

Setup pixel tolerance for MoveTo() operation.

See also: MoveTo().

◆ SetPlaneSize() [1/2]

void AIS_InteractiveContext::SetPlaneSize	(	const Standard_Real	theSizeX,
		const Standard_Real	theSizeY,
		const Standard_Boolean	theToUpdateViewer
	)

Sets the plane size defined by the length in the X direction XSize and that in the Y direction YSize.

◆ SetPlaneSize() [2/2]

void AIS_InteractiveContext::SetPlaneSize	(	const Standard_Real	theSize,
		const Standard_Boolean	theToUpdateViewer
	)

Sets the plane size aSize.

◆ SetPolygonOffsets()

void AIS_InteractiveContext::SetPolygonOffsets	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Integer	theMode,
		const Standard_ShortReal	theFactor,
		const Standard_ShortReal	theUnits,
		const Standard_Boolean	theToUpdateViewer
	)

Sets up polygon offsets for the given AIS_InteractiveObject. It simply calls AIS_InteractiveObject::SetPolygonOffsets().

◆ SetSelected() [1/2]

void AIS_InteractiveContext::SetSelected	(	const Handle< SelectMgr_EntityOwner > &	theOwners,
		const Standard_Boolean	theToUpdateViewer
	)

Unhighlights previously selected owners and marks them as not selected. Marks owner given as selected and highlights it. Performs selection filters check.

◆ SetSelected() [2/2]

void AIS_InteractiveContext::SetSelected	(	const Handle< AIS_InteractiveObject > &	theObject,
		const Standard_Boolean	theToUpdateViewer
	)

Puts the interactive object aniObj in the list of selected objects. Performs selection filters check.

◆ SetSelectedAspect()

void AIS_InteractiveContext::SetSelectedAspect	(	const Handle< Prs3d_BasicAspect > &	theAspect,
		const Standard_Boolean	theToUpdateViewer
	)

Sets the graphic basic aspect to the current presentation of ALL selected objects.

Deprecated:: ("Deprecated method - presentation attributes should be assigned directly to object")

◆ SetSelectedState()

Standard_Boolean AIS_InteractiveContext::SetSelectedState	(	const Handle< SelectMgr_EntityOwner > &	theOwner,
		const Standard_Boolean	theIsSelected
	)

Updates Selected state of specified owner without calling HilightSelected(). Has no effect if Selected state is not changed, and redirects to AddOrRemoveSelected() otherwise.

Parameters

theOwner	owner object to set selected state
theIsSelected	new selected state

Returns: TRUE if Selected state has been changed

◆ SetSelection()

void AIS_InteractiveContext::SetSelection ( const Handle< AIS_Selection > & theSelection )

inline

Sets selection instance to manipulate a container of selected owners.

Parameters

theSelection an instance of the selection

◆ SetSelectionModeActive()

void AIS_InteractiveContext::SetSelectionModeActive	(	const Handle< AIS_InteractiveObject > &	theObj,
		const Standard_Integer	theMode,
		const Standard_Boolean	theToActivate,
		const AIS_SelectionModesConcurrency	theConcurrency = `AIS_SelectionModesConcurrency_Multiple`,
		const Standard_Boolean	theIsForce = `Standard_False`
	)

Activates or deactivates the selection mode for specified object. Has no effect if selection mode was already active/deactivated.

Parameters

theObj	object to activate/deactivate selection mode
theMode	selection mode to activate/deactivate; deactivation of -1 selection mode will effectively deactivate all selection modes; activation of -1 selection mode with AIS_SelectionModesConcurrency_Single will deactivate all selection modes, and will has no effect otherwise
theToActivate	activation/deactivation flag
theConcurrency	specifies how to handle already activated selection modes; default value (AIS_SelectionModesConcurrency_Multiple) means active selection modes should be left as is, AIS_SelectionModesConcurrency_Single can be used if only one selection mode is expected to be active and AIS_SelectionModesConcurrency_GlobalOrLocal can be used if either AIS_InteractiveObject::GlobalSelectionMode() or any combination of Local selection modes is acceptable; this value is considered only if theToActivate set to TRUE
theIsForce	when set to TRUE, the display status will be ignored while activating selection mode

◆ SetSelectionSensitivity()

void AIS_InteractiveContext::SetSelectionSensitivity	(	const Handle< AIS_InteractiveObject > &	theObject,
		const Standard_Integer	theMode,
		const Standard_Integer	theNewSensitivity
	)

Allows to manage sensitivity of a particular selection of interactive object theObject and changes previous sensitivity value of all sensitive entities in selection with theMode to the given theNewSensitivity.

◆ SetSelectionStyle()

void AIS_InteractiveContext::SetSelectionStyle ( const Handle< Prs3d_Drawer > & theStyle )

inline

Setup the style of selection highlighting.

◆ SetSubIntensityColor()

void AIS_InteractiveContext::SetSubIntensityColor ( const Quantity_Color & theColor )

inline

Sub-intensity allows temporary highlighting of particular objects with specified color in a manner of selection highlight, but without actual selection (e.g., global status and owner's selection state will not be updated). The method sets up the color for such highlighting. By default, this is Quantity_NOC_GRAY40.

◆ SetToHilightSelected()

void AIS_InteractiveContext::SetToHilightSelected ( const Standard_Boolean toHilight )

inline

Specify whether selected object must be hilighted when mouse cursor is moved above it (in MoveTo method). By default this value is false and selected object is not hilighted in this case.

See also: MoveTo()

◆ SetTransformPersistence() [1/2]

void AIS_InteractiveContext::SetTransformPersistence	(	const Handle< AIS_InteractiveObject > &	theObject,
		const Handle< Graphic3d_TransformPers > &	theTrsfPers
	)

Sets transform persistence.

◆ SetTransformPersistence() [2/2]

void AIS_InteractiveContext::SetTransformPersistence	(	const Handle< AIS_InteractiveObject > &	theObj,
		const Graphic3d_TransModeFlags &	theFlag,
		const gp_Pnt &	thePoint = `gp_Pnt (0.0, 0.0, 0.0)`
	)

inline

Deprecated:: ("This method is deprecated - SetTransformPersistence() taking Graphic3d_TransformPers should be called instead")

◆ SetTransparency()

void AIS_InteractiveContext::SetTransparency	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Real	theValue,
		const Standard_Boolean	theToUpdateViewer
	)

Provides the transparency settings for viewing the Object. The transparency value aValue may be between 0.0, opaque, and 1.0, fully transparent.

◆ SetTrihedronSize()

void AIS_InteractiveContext::SetTrihedronSize	(	const Standard_Real	theSize,
		const Standard_Boolean	theToUpdateViewer
	)

Sets the size aSize of the trihedron. Is used to change the default value 100 mm for display of trihedra. Use of this function in one of your own interactive objects requires a call to the Compute function of the new class. This will recalculate the presentation for every trihedron displayed.

◆ SetViewAffinity()

void AIS_InteractiveContext::SetViewAffinity	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Handle< V3d_View > &	theView,
		const Standard_Boolean	theIsVisible
	)

Setup object visibility in specified view. Has no effect if object is not displayed in this context.

◆ SetWidth()

virtual void AIS_InteractiveContext::SetWidth	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Real	theValue,
		const Standard_Boolean	theToUpdateViewer
	)

virtual

Sets the width of the Object.

◆ SetZLayer()

void AIS_InteractiveContext::SetZLayer	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Graphic3d_ZLayerId	theLayerId
	)

Set Z layer id for interactive object. The Z layers can be used to display temporarily presentations of some object in front of the other objects in the scene. The ids for Z layers are generated by V3d_Viewer.

◆ ShiftSelect() [1/3]

AIS_StatusOfPick AIS_InteractiveContext::ShiftSelect ( const Standard_Boolean theToUpdateViewer )

Adds the last detected to the list of previous picked. If the last detected was already declared as picked, removes it from the Picked List.

See also: MoveTo().

◆ ShiftSelect() [2/3]

AIS_StatusOfPick AIS_InteractiveContext::ShiftSelect	(	const TColgp_Array1OfPnt2d &	thePolyline,
		const Handle< V3d_View > &	theView,
		const Standard_Boolean	theToUpdateViewer
	)

Adds the last detected to the list of previous picked. If the last detected was already declared as picked, removes it from the Picked List.

◆ ShiftSelect() [3/3]

AIS_StatusOfPick AIS_InteractiveContext::ShiftSelect	(	const Standard_Integer	theXPMin,
		const Standard_Integer	theYPMin,
		const Standard_Integer	theXPMax,
		const Standard_Integer	theYPMax,
		const Handle< V3d_View > &	theView,
		const Standard_Boolean	theToUpdateViewer
	)

Rectangle of selection; adds new detected entities into the picked list, removes the detected entities that were already stored.

◆ Status()

void AIS_InteractiveContext::Status	(	const Handle< AIS_InteractiveObject > &	anObj,
		TCollection_ExtendedString &	astatus
	)		const

Returns the status of the Interactive Context for the view of the Interactive Object.

◆ SubIntensityColor()

const Quantity_Color& AIS_InteractiveContext::SubIntensityColor ( ) const

inline

Sub-intensity allows temporary highlighting of particular objects with specified color in a manner of selection highlight, but without actual selection (e.g., global status and owner's selection state will not be updated). The method returns the color of such highlighting. By default, it is Quantity_NOC_GRAY40.

◆ SubIntensityOff()

void AIS_InteractiveContext::SubIntensityOff	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Boolean	theToUpdateViewer
	)

Removes the subintensity option for the entity. If a local context is open, the presentation of the Interactive Object activates the selection mode.

◆ SubIntensityOn()

void AIS_InteractiveContext::SubIntensityOn	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Boolean	theToUpdateViewer
	)

Highlights, and removes highlights from, the displayed object which is displayed at Neutral Point with subintensity color. Available only for active local context. There is no effect if there is no local context. If a local context is open, the presentation of the Interactive Object activates the selection mode.

◆ ToHilightSelected()

Standard_Boolean AIS_InteractiveContext::ToHilightSelected ( ) const

inline

Return value specified whether selected object must be hilighted when mouse cursor is moved above it.

See also: MoveTo()

◆ TrihedronSize()

Standard_Real AIS_InteractiveContext::TrihedronSize ( ) const

returns the current value of trihedron size.

◆ turnOnSubintensity()

void AIS_InteractiveContext::turnOnSubintensity	(	const Handle< AIS_InteractiveObject > &	theObject = `NULL`,
		const Standard_Integer	theDispMode = `-1`,
		const Standard_Boolean	theIsDisplayedOnly = `Standard_True`
	)		const

protected

Helper function that turns on sub-intensity in global status and highlights given objects with sub-intensity color.

Parameters

theObject	[in] the object. If NULL is given, than sub-intensity will be turned on for all inveractive objects of the context
theDispMode	[in] display mode. If -1 is given, sub-intensity will be turned on for all display modes in global status's list of modes
theIsDisplayedOnly	[in] is true if sub-intensity should be applied only to objects with status AIS_DS_Displayed

◆ unhighlightGlobal()

void AIS_InteractiveContext::unhighlightGlobal ( const Handle< AIS_InteractiveObject > & theObj )

protected

Helper function that unhighlights global selection owner of given interactive. The function does not perform any updates of global or owner status.

◆ unhighlightOwners()

void AIS_InteractiveContext::unhighlightOwners	(	const AIS_NListOfEntityOwner &	theOwners,
		const Standard_Boolean	theIsToHilightSubIntensity = `Standard_False`
	)

protected

Helper function that unhighlights the owners with check for AutoHighlight, e.g. is used for selection.

◆ unhighlightSelected()

void AIS_InteractiveContext::unhighlightSelected ( const Standard_Boolean theIsToHilightSubIntensity = Standard_False )

protected

Helper function that unhighlights all owners that are stored in current AIS_Selection. The function updates global status and selection state of owner and interactive object. If the parameter <theIsToHilightSubIntensity> is set to true, interactive objects with sub-intensity switched on in AIS_GlobalStatus will be highlighted with context's sub-intensity color.

◆ Unhilight()

void AIS_InteractiveContext::Unhilight	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Boolean	theToUpdateViewer
	)

Removes hilighting from the Object.

◆ UnhilightCurrents()

void AIS_InteractiveContext::UnhilightCurrents ( const Standard_Boolean theToUpdateViewer )

inline

Removes highlighting from current objects. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects.

Deprecated:: ("Local Context is deprecated - local selection should be used without Local Context")

◆ UnhilightSelected()

void AIS_InteractiveContext::UnhilightSelected ( const Standard_Boolean theToUpdateViewer )

Removes highlighting from selected objects.

◆ unselectOwners()

void AIS_InteractiveContext::unselectOwners ( const Handle< AIS_InteractiveObject > & theObject )

protected

Helper function to unhighlight all entity owners currently highlighted with seleciton color.

◆ UnsetColor()

void AIS_InteractiveContext::UnsetColor	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Boolean	theToUpdateViewer
	)

Removes the color selection for the selected entity.

◆ UnsetDisplayMode()

void AIS_InteractiveContext::UnsetDisplayMode	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Boolean	theToUpdateViewer
	)

Unsets the display mode of seen Interactive Objects.

◆ UnsetLocalAttributes()

void AIS_InteractiveContext::UnsetLocalAttributes	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Boolean	theToUpdateViewer
	)

Removes the settings for local attributes of the Object and returns to defaults.

◆ UnsetMaterial()

void AIS_InteractiveContext::UnsetMaterial	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Boolean	theToUpdateViewer
	)

Removes the type of material setting for viewing the Object.

◆ UnsetTransparency()

void AIS_InteractiveContext::UnsetTransparency	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Boolean	theToUpdateViewer
	)

Removes the transparency settings for viewing the Object.

◆ UnsetWidth()

virtual void AIS_InteractiveContext::UnsetWidth	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Boolean	theToUpdateViewer
	)

virtual

Removes the width setting of the Object.

◆ Update()

void AIS_InteractiveContext::Update	(	const Handle< AIS_InteractiveObject > &	theIObj,
		const Standard_Boolean	theUpdateViewer
	)

Updates displayed interactive object by checking and recomputing its flagged as "to be recomputed" presentation and selection structures. This method does not force any recomputation on its own. The method recomputes selections even if they are loaded without activation in particular selector.

◆ UpdateCurrent()

void AIS_InteractiveContext::UpdateCurrent ( )

inline

Updates the list of current objects, i.e. hilights new current objects, removes hilighting from former current objects. Objects selected when there is no open local context are called current objects; those selected in open local context, selected objects.

Deprecated:: ("Local Context is deprecated - local selection should be used without Local Context")

◆ UpdateCurrentViewer()

void AIS_InteractiveContext::UpdateCurrentViewer ( )

Updates the current viewer.

◆ UpdateSelected()

void AIS_InteractiveContext::UpdateSelected ( Standard_Boolean theToUpdateViewer )

inline

Updates the list of selected objects: i.e. highlights the newly selected ones and unhighlights previously selected objects.

See also: HilightSelected().

◆ Width()

virtual Standard_Real AIS_InteractiveContext::Width ( const Handle< AIS_InteractiveObject > & aniobj ) const

virtual

Returns the width of the Interactive Object in the interactive context.

Field Documentation

◆ mgrSelector

Handle< SelectMgr_SelectionManager > AIS_InteractiveContext::mgrSelector

protected

context filter (the content active filters can be applied with AND or OR operation)

◆ myAutoHilight

Standard_Boolean AIS_InteractiveContext::myAutoHilight

protected

context filter (the content active filters can be applied with AND or OR operation)

◆ myCurDetected

Standard_Integer AIS_InteractiveContext::myCurDetected

protected

context filter (the content active filters can be applied with AND or OR operation)

◆ myCurHighlighted

Standard_Integer AIS_InteractiveContext::myCurHighlighted

protected

context filter (the content active filters can be applied with AND or OR operation)

◆ myDefaultDrawer

Handle< Prs3d_Drawer > AIS_InteractiveContext::myDefaultDrawer

protected

context filter (the content active filters can be applied with AND or OR operation)

◆ myDetectedSeq

TColStd_SequenceOfInteger AIS_InteractiveContext::myDetectedSeq

protected

context filter (the content active filters can be applied with AND or OR operation)

◆ myFilters

Handle< SelectMgr_AndOrFilter > AIS_InteractiveContext::myFilters

protected

context filter (the content active filters can be applied with AND or OR operation)

◆ myIsAutoActivateSelMode

Standard_Boolean AIS_InteractiveContext::myIsAutoActivateSelMode

protected

context filter (the content active filters can be applied with AND or OR operation)

◆ myLastActiveView

V3d_View* AIS_InteractiveContext::myLastActiveView

protected

context filter (the content active filters can be applied with AND or OR operation)

◆ myLastPicked

Handle< SelectMgr_EntityOwner > AIS_InteractiveContext::myLastPicked

protected

context filter (the content active filters can be applied with AND or OR operation)

◆ myMainPM

Handle< PrsMgr_PresentationManager3d > AIS_InteractiveContext::myMainPM

protected

context filter (the content active filters can be applied with AND or OR operation)

◆ myMainSel

Handle< StdSelect_ViewerSelector3d > AIS_InteractiveContext::myMainSel

protected

context filter (the content active filters can be applied with AND or OR operation)

◆ myMainVwr

Handle< V3d_Viewer > AIS_InteractiveContext::myMainVwr

protected

context filter (the content active filters can be applied with AND or OR operation)

◆ myObjects

AIS_DataMapOfIOStatus AIS_InteractiveContext::myObjects

protected

context filter (the content active filters can be applied with AND or OR operation)

◆ myPickingStrategy

SelectMgr_PickingStrategy AIS_InteractiveContext::myPickingStrategy

protected

picking strategy to be applied within MoveTo()

◆ mySelection

Handle< AIS_Selection > AIS_InteractiveContext::mySelection

protected

context filter (the content active filters can be applied with AND or OR operation)

◆ myStyles

Handle< Prs3d_Drawer > AIS_InteractiveContext::myStyles[Prs3d_TypeOfHighlight_NB]

protected

context filter (the content active filters can be applied with AND or OR operation)

◆ myToHilightSelected

Standard_Boolean AIS_InteractiveContext::myToHilightSelected

protected

context filter (the content active filters can be applied with AND or OR operation)

The documentation for this class was generated from the following file:

AIS_InteractiveContext.hxx

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ AIS_InteractiveContext()

◆ ~AIS_InteractiveContext()

Member Function Documentation

◆ Activate() [1/2]

◆ Activate() [2/2]

◆ ActivatedModes()

◆ AddFilter()

◆ AddOrRemoveCurrentObject()

◆ AddOrRemoveSelected() [1/2]

◆ AddOrRemoveSelected() [2/2]

◆ AddSelect() [1/2]

◆ AddSelect() [2/2]

◆ Applicative()

◆ AutomaticHilight()

◆ BeginImmediateDraw()

◆ BoundingBoxOfSelection()

◆ ClearActiveSensitive()

◆ ClearCurrents()

◆ ClearDetected()

◆ clearDynamicHighlight()

◆ ClearGlobal()

◆ ClearGlobalPrs()

◆ ClearPrs()

◆ ClearSelected()

◆ Color()

◆ Current()

◆ CurrentViewer()

◆ Deactivate() [1/4]

◆ Deactivate() [2/4]

◆ Deactivate() [3/4]

◆ Deactivate() [4/4]

◆ DefaultDrawer()

◆ DetectedCurrentObject()

◆ DetectedCurrentOwner()

◆ DetectedCurrentShape()

◆ DetectedInteractive()

◆ DetectedOwner()

◆ DetectedShape()

◆ DeviationAngle()

◆ DeviationCoefficient()

◆ DisableDrawHiddenLine()

◆ Disconnect()

◆ Display() [1/3]

◆ Display() [2/3]

◆ Display() [3/3]

◆ DisplayActiveSensitive() [1/2]

◆ DisplayActiveSensitive() [2/2]

◆ DisplayAll()

◆ DisplayedObjects() [1/2]

◆ DisplayedObjects() [2/2]

◆ DisplayMode()

◆ DisplayPriority()

◆ DisplaySelected()

◆ DisplayStatus()

◆ DrawHiddenLine()

◆ DumpJson()

◆ EnableDrawHiddenLine()

◆ EndImmediateDraw() [1/2]

◆ EndImmediateDraw() [2/2]

◆ EntityOwners()

◆ Erase()

◆ EraseAll()

◆ ErasedObjects() [1/2]

◆ ErasedObjects() [2/2]

◆ EraseGlobal()

◆ EraseSelected()

◆ Filters()

◆ FilterType()

◆ FirstSelectedObject()

◆ FitSelected() [1/2]

◆ FitSelected() [2/2]

◆ GetAutoActivateSelection()

◆ GetDefModes()

◆ getHilightMode()